Manualios.com

Cisco WVC80N Operation & User’s Manual

Cisco WVC80N Manual Online:

4.85, 1812 votes
Cisco WVC80N User Manual
Cisco WVC80N User Guide
Cisco WVC80N Online Manual

Text of Cisco WVC80N User Guide:

  • Cisco WVC80N, Appendix F Regulatory Information 48 Wireless-N Internet Home Monitoring Camera User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the p

  • Cisco WVC80N, 54 Appendix G Software End User License Agreement Wireless-N Internet Home Monitoring Camera Software can enable any other computer (on the same primary network) to generate reports. When a computer is enabled, that computer shows a notification that it is being monitored. As long as that computer is enabled, each time the Software is started the user of that particular computer will see a notification that it is being monitored by the reports feature. Any computer on the network with the Software installed can enable or disable any other computer from the reports feature. In addition, Cisco may collect and s

  • Cisco WVC80N, 65 Appendix G Software End User License Agreement Wireless-N Internet Home Monitoring Camera 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young ([email protected])” The word ‘cryptographic’ can be left ou

  • Cisco WVC80N, Chapter 3 Advanced Configuration with the Web-based Utility 15 Wireless-N Internet Home Monitoring Camera and the fields that accompany them are described in detail below. • Disable This option implements no security on your wireless network. Data is not encrypted before transmission. Wireless Security - Disable Security Mode • WEP WEP is a basic encryption method, which is not as secure as later methods such as WPA-Personal or WPA2 Personal. However, it is supported by all clients. Wireless Security - WEP

  • Cisco WVC80N, Appendix D CGI Commands 36 Wireless-N Internet Home Monitoring Camera Appendix D Download Logs Method: GET URL: http://<ip>/adm/log.cgi Return: HTTP/1.0 200 OK \r\n … content-type: text/plain\r\n\r\n … <log data> Motion Detection Commands You can configure the motion detection sensitivity area to be either the entire screen or up to three specific areas. Each area can have its own name and threshold setting. Once the moving indicators exceed the user-configured threshold, a motion detection event will be triggered. This is the definition of the sensitivity area coordinates on a 640x480 resolution image. The home (0, 0) po

  • 64 Appendix G Software End User License Agreement Wireless-N Internet Home Monitoring Camera Schedule 3-C OPENSSL LICENSE If this Cisco product contains open source software licensed under the OpenSSL license: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/). This p

  • Cisco WVC80N, Chapter 2 Installing and Using the Camera Utility 6 Wireless-N Internet Home Monitoring Camera Using the Camera Utility for the First Time The Camera Utility starts up automatically after the Utility is successfully installed. To set up your first camera: 1. Click the Setup icon in the upper left corner of the window. 2. The Cameras tab is displayed. Select your Camera from the Automatically add cameras list and click Add to my list. If your Camera is not listed, click Refresh to update the list, or add the Camera manually. To manually add a Camera, go to the Address field and enter either its web address or its IP

  • Chapter 3 Advanced Configuration with the Web-based Utility 16 Wireless-N Internet Home Monitoring Camera Max Frame Rate Select the maximum frame rate for the camera. Reducing this lowers the amount of bandwidth required by the camera. The range is from 1 to 30. NOTE: Video quality and/or performance may be affected by the number of users connected to the Cam

  • Cisco WVC80N, Appendix F Regulatory Information 46 Wireless-N Internet Home Monitoring Camera Appendix F: Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class

  • Cisco WVC80N, 61 Appendix G Software End User License Agreement Wireless-N Internet Home Monitoring Camera (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independen

  • Cisco WVC80N, 57 Appendix G Software End User License Agreement Wireless-N Internet Home Monitoring Camera 1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a c

  • Cisco WVC80N, Appendix D CGI Commands 30 Wireless-N Internet Home Monitoring Camera Appendix D If the client player is the QuickTime player, the latency is always approximately 3 second. If there is no audio content in the streaming, you can use the extension parameter “[?|&]latency=no” to push the QuickTime player to play the streaming video without any latency, but this method causes the frame rate to be unstable. Example: rtsp://<ip>/img/video.sav?latency=no Note that the camera is able to support the follow

  • Cisco WVC80N, Appendix D CGI Commands 42 Wireless-N Internet Home Monitoring Camera Appendix D else if(chr3 == (char)0) { enc4 = 64; } o_buf[j++] = keyStr[enc1]; o_buf[j++] = keyStr[enc2]; o_buf[j++] = keyStr[enc3]; o_buf[j++] = keyStr[enc4]; // OK, now clean out the variables used. chr1 = chr2 = chr3 = (char)0; enc1 = enc2 = enc3 = enc4 = (char)0; } while (i < strlen(i_buf)); //And finish off the loop //Now return the encoded values. return j; } //-------------------------------------------------------------------- // Description: decrypt the input data with the base64 // Inpu

  • Cisco WVC80N, Appendix D CGI Commands 34 Wireless-N Internet Home Monitoring Camera Appendix D Get/Set System Date and Time Method: GET URL: http://<ip>/adm/date.cgi?action=<value>[&<parameter pair>…] Parameter Value and description action Get/Set the system date and time get= Get the system date and time set= Set the system date and time time_zone The index value in time zone table (Read-only) year Year (2005~2037) month Month (1~12) day Day (1~31) hour Hour (0~23) minute Minute (0~59) second Second (0~59) Return: A successful request returns all group parameters or

  • Cisco WVC80N, Appendix D CGI Commands 39 Wireless-N Internet Home Monitoring Camera SMB/CIFS Server/SharedFolder Commands SMB/CIFS Server Survey Method: GET URL: http://<ip>/adm/smb_survey.cgi[?parameter=value[&parameter=value...]] Parameter Value and description timeout (Optional) The timeout in seconds of the CGI The CGI will stop surveying and return the result if it times out. Valid values: 5-120 (default is 30) action (Optional) This CGI will terminate survey action. stop Return: The result will be returned in XML format (the content size depends on how many servers are in the network). A successful request returns the result of

  • Table of Contents iii Wireless-N Internet Home Monitoring Camera Appendix F: Regulatory Information 46 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Appendix D CGI Commands 28 Wireless-N Internet Home Monitoring Camera Appendix D Appendix D: Common Gateway Interface (CGI) Commands Overview CGI (Common Gateway Interface) is a simple method to send or receive data from a program or application through a web interface. The WVC80N supports a multitude of CGI commands that can be passed to it via HTTP from your client PC or mobile

  • Cisco WVC80N, Appendix D CGI Commands 38 Wireless-N Internet Home Monitoring Camera Appendix D Parameter Value and description md_name1 ... md_name4 Name of the motion detection area 1 ~ 4 (12 ASCII characters) md_window1 ... md_window4 The coordinates of motion detection window N (relative to resolution 640x480) X1, Y1, X2, Y2 md_threshold1 ... md_threshold4 The threshold of motion detection window N (0 - 255) Return: HTTP/1.0 200 OK \r\n … content-type: text/plain\r\n \r\n OK\r\n Notes: The first motion window is used for full screen. • Use “md_switch1” as the switch

  • Cisco WVC80N, Appendix D CGI Commands 43 Wireless-N Internet Home Monitoring Camera //Heres the decode part. There’s really only one way to do it. chr1 = (enc1 << 2) | (enc2 >> 4); chr2 = ((enc2 & 15) << 4) | (enc3 >> 2); chr3 = ((enc3 & 3) << 6) | enc4; o_buf[j++] = (char)chr1; if (enc3 != 64) { o_buf[j++] = (char)chr2; } if (enc4 != 64) { o_buf[j++] = (char)chr3; } //now clean out the variables used chr1 = (char)0; chr2 = (char)0; chr3 = (char)0; enc1 = 0; enc2 = 0; enc3 = 0; enc4 = 0; } while (i < strlen(i_bu

  • Cisco WVC80N, 56 Appendix G Software End User License Agreement Wireless-N Internet Home Monitoring Camera send you Service related email messages as long as you are a subscriber to the Service. If you wish to opt-out of receiving Service related email messages, you may cancel the Service by providing written notice via www. networkmagic.com/support to Cisco of such cancellation and uninstalling the Software and discontinuing your use of the Service. END OF SCHEDULE 2 Schedule 3 Open Source and Third Party Licenses Schedule 3-A If this Cisco product contains open source software licensed under Version

  • Cisco WVC80N, Appendix E Warranty Information 45 Wireless-N Internet Home Monitoring Camera OF SUCH DAMAGES. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even if any warranty or remedy provided under this limited warranty fails of its essential purpose. No Linksys employee, agent or reseller is authorized to make any verbal or written modification, extension or addition to this warranty, and Linksys expressly disclaims any such change to this warranty. If any portion

More Instructions:

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Gaggenau GM 230-130 Operating instructions manual gaggenau/gm-230-130-8VO.pdf 24 Apr 2023 38 3.36 Mb
2 Peavey TKO 80 Operation & user’s manual peavey/tko-80-7K9.pdf 15 Apr 2023 6 1.32 Mb
3 Toshiba BMS-SM1280HTLE Service manual toshiba/bms-sm1280htle-LZ2.pdf 17 Nov 2023 53
4 Olympus FE-110/X-705 Basic manual olympus/fe-110-x-705-ZFM.pdf 27 Oct 2022 116
5 RCA 25415RE3 - Business Phone Corded Brochure rca/25415re3-business-phone-corded-E2X.pdf 22 Oct 2022 2 0.02 Mb
6 Asus P5VDC-TVM SE Operation & user’s manual asus/p5vdc-tvm-se-5NL.pdf 05 Mar 2023 70

Similar Resources:

  • Lumens

    VC-A70H

    (12 pages)
    VC-A70H Firmware(FW) Upgrade 1 VC-A70H Firmware(FW) Upgrade Please contact Lumens FAE Department through e-mail to get the proper FW and AP before upgrading. 1. Device and Tool Preparation 1.1 Please prepare follow …
  • D-Link

    DCS-3715

    (12 pages)
    This document will guide you through the basic installation process for your new D-Link Network Camera.DCS-3715Documentation also available on CD and via the D-Link WebsiteQuick Installation GuideFull HD IP Camera …
  • Verint

    Nextiva

    (32 pages)
    Video and Situation Intelligence Solutions™ VERINT NEXTIVA IP CAMERA MOUNTING GUIDE PAGE 1The Following IP PTZ cameras are featured in this guide:Verint Nextiva PTZ Camera Mounting GuideThis guide is a quick reference guide for users seeking information on how to properly order a Verint Nextiva IP PTZ system. This guide includes ordering matri …
  • Vivotek

    FD8361L

    (14 pages)
    Quick Installation GuideEnglish繁中 日本語Español Português簡中FrançaisDeutschItalianoTürkçePolskiРусскийČesky SvenskaVIVOTEK INC.6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.|T: +886-2-82455282|F: +886-2-82455532| E: [email protected] USA, INC. 2050 Ringwood Avenue, San Jose, CA 95131|T: 408-773-8686| …
  • FLIR

    C133ED

    (2 pages)
    Package ContentsMODEL: C133ED/C133EDPQUICK START GUIDEEnglish Version 1.0www.flir.com/security/supportFLIR Systems, Inc., Copyright © 2015 As our products are subject to continuous improvement, FLIR Systems Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OESafety Preca …
  • Digital Watchdog

    DWC-MC753WTIR

    (16 pages)
    ABOUT MANUALBefore installing and using the camera, please read this manual carefully.Be sure to keep it handy for future reference.04172015Analog High DefinitionMicro Dome CameraDWC-MC753WTIR …

Comments, Questions and Opinions: