Cisco 200 Series Operation & User’s Manual

Text of Cisco 200 Series User Guide:

• Cisco 200 Series, Administration Switch Management Access Control Cisco Small Business 200E Series Advanced Smart Switch Command Reference 81 2 Command Modes Privileged EXEC Related Commands copy nvram:sshkey-rsa2 Use this command to download an RSA2 SSH host key. A key cannot be downloaded while SSH is enabled or sessions are active. copy url nvram:sshkey-rsa2 Command Modes Privileged EXEC Related Commands crypto key generate dsa Use this command to generate a DSA key pair for SSH. The new key files overwrite any existing generated or downloaded DSA key files. Us

• Cisco 200 Series, Multicast Cisco Small Business 200E Series Advanced Smart Switch Command Reference 319 7 Related Commands set mld mrouter interface Use this command to configure the interface as a multicast router interface. When configured as a multicast router interface, the interface is treated as a multicast router interface in all VLANs. Use the no form of the command to disable it. set mld mrouter interface no set mld mrouter interface Default MLD mrouter is disabled on all interfaces. Command Modes Interface Config Related Commands Command Description show mldsnooping mrouter interface Displays information about statically configured mrouter port

• Cisco 200 Series, Spanning Tree Protocol Cisco Small Business 200E Series Advanced Smart Switch Command Reference 279 5 Syntax Descriptions Command Modes Privileged EXEC Examples The following shows sample output for the command: (Switch) #show spanning-tree mst port detailed 10 e12 MST Instance ID................................ 10 Port Identifier................................ 80:56 Port Priority.................................. 128 Port Forwarding State.......................... Disabled Port Role...................................... Disabled Auto-calculate Port Path Cost.................. Enabled Port Path

• Administration SNTP and Time Settings Cisco Small Business 200E Series Advanced Smart Switch Command Reference 113 2 Related Commands show sntp Use this command to display SNTP status. show sntp Command Modes Privileged Exec Examples The following shows sample output for the command. (Switch) #show sntp Last Update Time: Jan 1 05:30:00 1970 Last Unicast Attempt Time: Jan 1 05:30:00 1970

• Cisco 200 Series, IP Configuration DNS Cisco Small Business 200E Series Advanced Smart Switch Command Reference 412 10 Command Modes Global Config Related Commands ipv6 host Use this command to define static hostname-to-IPv6 address mapping in the host cache. The name is hostname, and v6 address is the IPv6 address of the host. Use the no form of the command to remove the mapping. ipv6 host hostname ip-address no ipv6 host hostname Syntax Descriptions Command Modes Global Config Command Description ip domain lookup Enables the DNS client. ip domain retry Specifies the number of times to retry sending Domain Name System (DNS) queries. ip domain name De

• Cisco 200 Series, Administration RMON Cisco Small Business 200E Series Advanced Smart Switch Command Reference 155 2 Related Commands RMON Smart switch supports Remote Monitoring (RMON) for collecting data about network traffic. A device that supports gathering and reporting the RMON data is referred to as an RMON probe or RMON Agent. An RMON probe provides RMON data to an RMON Manager for analysis and presentation to the User. This section describes the RMON commands. rmon alarm Use this command to configure alarm conditions. Use the no form of the command to remove an alarm. rmon alarm index variable interval rthreshold fthreshold revent fevent [type type] [st

• Cisco 200 Series, Administration Switch Management Access Control Cisco Small Business 200E Series Advanced Smart Switch Command Reference 95 2 Usage Guidelines This command enters the access-list configuration mode, where the denied or permitted access conditions with the deny and permit commands must be defined. If no match criteria are defined, the default is to permit access. If re- entering to an access-list context, the new rules are entered at the end of the access-list. Use the management access-class command to select the active access-list. The active management list cannot be updated or removed. Related Commands permit Use this command

• Cisco 200 Series, Administration RMON Cisco Small Business 200E Series Advanced Smart Switch Command Reference 171 2 Undersize Pkts The total number of packets received less than 64 octets long (excluding framing bits, but including FCS octets) and otherwise well-formed. Oversize Pkts The total number of packets received longer than 1518 octets (excluding framing bits, but including FCS octets) and otherwise well-formed. Fragments The total number of packets received less than 64 octets in length (excluding framing bits but including FCS octets) and either

• Cisco 200 Series, VLAN Management Media VLAN Cisco Small Business 200E Series Advanced Smart Switch Command Reference 256 4 guest-voice Disable guest-voice-signaling Disable soft-phone Disable video-conferencing Disable streaming-video Disable video-signaling Disable Related Commands Command Description media-vlan Enables the Media-VLAN capability on the switch.

• Cisco 200 Series, Spanning Tree Protocol Cisco Small Business 200E Series Advanced Smart Switch Command Reference 263 5 spanning-tree configuration revision Use this command to set the MST Configuration Identifier Revision Level, which identifies the configuration that the switch is currently using. Use the no form of the command to reset it to the default value. NOTE This configuration is applicable only when spanning tree mode is MSTP. spanning-tree configuration revision 0-65535 no spanning-tree configuration revision Syntax Descriptions Default revision—0 Command Modes Global Config Related Commands show spanning- tree mst

• Cisco 200 Series, IP Configuration IP Addresses Cisco Small Business 200E Series Advanced Smart Switch Command Reference 392 10 network ipv6 address Use this command to manually configure IPv6 global address, enable/disable stateless global address autoconfiguration, and enable/disable DHCPv6 client protocol information for the management interface. Multiple IPv6 addresses can be configured on the management interface. Use the no form of the command to remove all configured IPv6 prefixes. Use the no form with the a

• Administration Syslog Cisco Small Business 200E Series Advanced Smart Switch Command Reference 137 2 Related Commands logging aggregation enable Use this command to enable the switch to consolidate consecutive log messages of the same type into a single log message. Use the no form of the command to disable this feature. logging aggregation enable no logging aggregation e

• Cisco 200 Series, IP Configuration IP Addresses Cisco Small Business 200E Series Advanced Smart Switch Command Reference 395 10 Syntax Descriptions Command Modes Privileged Exec Related Commands network parms Use this command to set the IPv4 address, subnet mask, and gateway for the switch. The IP address and the gateway must be in the same subnet. network parms ip-address netmask [gateway] Syntax Descriptions Defaults • Default IP address: 192.168.1.254 • Default mask: 255.255.255.0 • Default gateway: 192.168.1.1 Parameter Description ipv6-address The neighbor’s global IPv6 address. mac-address The neighbor’s MAC address. Command Description show network nd

• Spanning Tree Protocol Cisco Small Business 200E Series Advanced Smart Switch Command Reference 282 5 show spanning-tree mst summary Use this command to display summary information for all multiple spanning tree instances in the switch. show spanning-tree mst summary Command Modes Privileged EXEC Examples The following shows sample output for the command. (Switch) #

• Cisco 200 Series, VLAN Management VLAN Cisco Small Business 200E Series Advanced Smart Switch Command Reference 227 4 Examples The following example shows switchport configuration for an interface. (switch) #show interfaces switchport e1 Port: e1 VLAN Membership mode:Trunk Mode Operating parameters: PVID: 1 Ingress Filtering: Enabled Acceptable Frame Type: Admit All Default Priority: 0 Port e1 is member in: VLAN Name Egress rule Type ---- --------------------------------- ----------- -------- 1 Default Untagged Default Static config

• Cisco 200 Series, Administration Syslog Cisco Small Business 200E Series Advanced Smart Switch Command Reference 142 2 Syntax Descriptions Defaults • port—514. • severitylevel—Critical (2). Command Modes Global Config Parameter Description addresstype The type of address being passed. Options are ip or dns. ipaddr The IP address of the logging host, if the addresstype is specified as ip. hostname The hostname of the logging host, if the addresstype is specified as dns. port The port number of the syslog server. The r

• Cisco 200 Series, Port Management Link Aggregation Cisco Small Business 200E Series Advanced Smart Switch Command Reference 200 3 This section describes the commands you use to configure link aggregation. addport This command adds a port to a LAG. addport logical interface Syntax Descriptions Command Modes Interface Config Examples The following command adds interface e5 to LAG ch1: (Switch) (config)#interface e5 (Switch) (Interface e5)#addport ch1 Related Commands deleteport (Interface Config) This command deletes the port from the LAG. The interface is the logical interface number of a configured LAG. deleteport l

• Cisco 200 Series, VLAN Management Auto-VoIP Cisco Small Business 200E Series Advanced Smart Switch Command Reference 248 4 Default The protocol-based VoIP profile is globally disabled. Command Modes Global Config Related Commands show auto-voip oui-based interface Use this command to display the VoIP profile settings for the specified VoIP type on an interface or on all switch interfaces. show auto-voip oui-based interface {interface | all} Syntax Descriptions Command Modes Privileged Exec Command Description auto-voip protocol-based Enables VoIP Profile on an interface. show auto-voip protocol-based Displays the VoIP Profile settings on the interface or interfaces

• Cisco 200 Series, IP Configuration IP Addresses Cisco Small Business 200E Series Advanced Smart Switch Command Reference 394 10 network ipv6 gateway Use this command to configure IPv6 gateway (i.e., default routers) for the management interface. Use the no form of the command to remove the IPv6 gateway. network ipv6 gateway gateway-address no network ipv6 gateway Syntax Descriptions Command Modes Privileged Exec Related Commands network ipv6 neighbor Use this command to add static IPv6 neighbor entry. Use the no form of the command to delete a static entry. network

• Cisco 200 Series, Administration SNTP and Time Settings Cisco Small Business 200E Series Advanced Smart Switch Command Reference 114 2 show sntp client Use this command to display settings for the switch when it acts as an SNTP client. show sntp client Command Modes Privileged Exec Examples The following shows sample output for the command. (Switch) #show sntp client Client Supported Modes: unicast broadcast SNTP Version: 4 Port: 123 Client Mode: broadcast Broadcast Poll Interval: 3 show clock Displays the time and date from the system clock. Client Supported Modes Indicates w

• Cisco 200 Series, Administration Switch Management Access Control Cisco Small Business 200E Series Advanced Smart Switch Command Reference 70 2 Examples The following shows sample output for the command. (switch)#show users login-history Login Time Username Protocol Location -------------------- --------- --------- --------------- Jan 19 2005 08:23:48 Bob Serial Jan 19 2005 08:29:29 Robert HTTP 172.16.0.8 Jan 19 2005 08:49:52 Betty Telnet 172.16.1.7 Related Commands username Use this command to add a new user to the local user database. Use the no form of the command to remove the user. username n

More Instructions:

	Cisco 200 Series Code setting instructions 26-11-2022 2	DOWNLOAD
	Cisco 200 Series Quick start manual 26-12-2022 72	DOWNLOAD
	Cisco 200 Series Installation manual 01-09-2022 76	DOWNLOAD
	Cisco 200 Series Quick start manual 18-09-2023 12	DOWNLOAD

Related Products and Documents (Switch):

Comparable Devices:

Similar Resources:

• TRENDnet TEG-S80TXD (2 pages) TRENDnet’s TEG-S80TXD Copper Gigabit Switch consist of eight 10/100/1000Mbps Copper Gigabit Ethernet ports with each port having Auto-negotiation and Auto-MDIX features. The Switch offers a reliable and affordable LAN solution to meet immediate bandwidth demand. Users can connect Server(s) to the Gigabit port(s) to increase network performance …

• SMC Networks SMC6709L2 (2 pages) www.smc-europe.com www.smc.comTiger Switch™ 10/100SMC6709L28-port 10/100+ 1 Gigabit and 2 Uplink Slot Standalone Managed SwitchSMC6709L2 is an intelligent standalone Fast Ethernet Switch with 8 auto-MDIX 10BASE-T/100BASE-TX ports and 1 10/100/1000BASE-Tport. There are also 2 slots for optional uplink expansion. One of the slots supports 100BASE-FX SMF/MMF …

• Avenview HDM3D-C6SW-R (24 pages) VIDEO WALLS VIDEO PROCESSORSVIDEO MATRIX SWITCHESEXTENDERS SPLITTERS WIRELESSCABLES & ACCESSORIESAV Connectivity, Distribution And Beyond...8x8 HDMI Matrix Switch over Single CAT5/6With Deep Color & 3D Support© 2013 Avenview Inc. All rights reserved.The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products …

• Gefen GEF-MOD-848-DVI (140 pages) Audio Embedder 3GSDI Release A1User ManualGEF-MOD-848-DVI • GEF-MOD-848-DVIELR GEF-MOD-848-ELR • GEF-MOD-848-DVI1FO GEF-MOD-848-1FO • GEF-MOD-848-DPDVI GEF-MOD-848-DPELR • GEF-MOD-848-DP1FO 8 8xDISPLAYSSOURCESModularMatrix …

• Vertiv Avocent ACS8000 (2 pages) 590-1483-501A1Avocent® AcS8000 AdvAnced conSole SyStemQuick Installation GuideSECURITY WARNING!The ACS8000 Advanced Console System provides extensive access to its connected devices. As a result, care must be taken to avoid compromising your security policies.From the factory, this equipment is shipped with the following settings:• DHCP, SSHv1, SSHv2, …

• GE 300 (2 pages) Max.Hp For AC Motors Starter Max Current Rating Contactor Max. Current Rating AC Volts Single- Phase Poly-Phase Size 0 115 1 - 200 - 3 230 2 3 18 amp (open and enclosed) 20 amp (open) 18amp (enclosed) 460—575 - 5 Si …

Comments, Questions and Opinions: