Manualios.com

Cisco Catalyst Express 500 Operation & User’s Manual

  • Catalyst Express 500 Switch
  • maWJgYQoaqzk6
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 14

Cisco Catalyst Express 500 Manual Online:

4, 780 votes
Cisco Catalyst Express 500 User Manual
Cisco Catalyst Express 500 User Guide
Cisco Catalyst Express 500 Online Manual

Text of Cisco Catalyst Express 500 User Guide:

  • Cisco Catalyst Express 500, CHAPTER 1-1 User Guide for the Catalyst Express 500 Switches OL-8122-01 1 Introduction Read this chapter to familiarize yourself with the features, benefits, and capabilities of the Catalyst Express 500 switches. Note This chapter and the rest of this guide focus on the concepts and tasks that are available from the switch hardware and the device manager GUI that is embedded in the switch software. Enhanced Catalyst Express 500 features and procedures are only available from the Cisco Network Assistant network management application. This application can be downloaded from Cisco.com. Refer to the Network Assistant documentation about these enhanced switch features. Chap

  • Cisco Catalyst Express 500, Chapter 1 Introduction Overview 1-2 User Guide for the Catalyst Express 500 Switches OL-8122-01 Overview The Catalyst Express switches (Table 1-1) provide networking for businesses with up to 250 employees. These switches provide network services to support data, voice, and mobile network demands. The services ensure transmission quality and reliability for data and voice traffic. They also provide security to protect against network attacks. You can simply install the switch and allow it to operate without a

  • Cisco Catalyst Express 500, 1-3 User Guide for the Catalyst Express 500 Switches OL-8122-01 Chapter 1 Introduction Overview Figure 1-1 is an example network using Catalyst Express switches. Devices outside the dotted line are network users and network resources, such as servers and printers. Devices within the dotted line are switches, routers, and access points that enable communication between network users and provide access to network resources. Figure 1-1 Catalyst Express Network Example Any of the Catalyst Express switch models can be Switches A, B, C, and D in this network. To take full advantage of the different switch models, use

  • Cisco Catalyst Express 500, Chapter 1 Introduction Features and Benefits 1-4 User Guide for the Catalyst Express 500 Switches OL-8122-01 PoE connections from the switch provide both power and network access to PoE-capable devices, such as IP phones and access points. PoE devices can receive up to 15.4 W of power from their connections to the switch. PoE also helps reduce cabling costs. You can place PoE devices where power outlets are not available or are not convenient. Multiple connections between the switches ensure that user

  • Cisco Catalyst Express 500, 1-5 User Guide for the Catalyst Express 500 Switches OL-8122-01 Chapter 1 Introduction Features and Benefits Hardware Features Figure 1-2 and the list that follows describe the switch hardware features and the benefits that they provide. All switches can be installed on a table top, in a rack, or mounted on a wall. For hardware installation information, see the “Install the Switch” section on page 2-5. Figure 1-2 Catalyst Express 500 Hardware Overview Catalyst Express 500 SERIES 2 1 1X 2X P O W E R O V E R E T H E R N E T 11X 12X 4 3 6 5 8 7 10 9 12 11 14 13 13X 14X 23X 24X 16 15 18 17 20 19 22 21 24 23 25 25 26 26 SY ST

  • Chapter 1 Introduction Features and Benefits 1-6 User Guide for the Catalyst Express 500 Switches OL-8122-01 10/100-Mbps Fast Ethernet Ports 10/100/1000-Mbps Gigabit Ethernet Ports • Autosensing (autonegotiation) of port speed and autonegotiating of duplex mode optimizes port bandwidth. • Automatic-medium-dependent interface crossover (auto-MDIX) capability aut

  • Cisco Catalyst Express 500, 1-7 User Guide for the Catalyst Express 500 Switches OL-8122-01 Chapter 1 Introduction Features and Benefits Software Features These are the switch software features and the benefits that they provide. You can configure these features through the device manager GUI (see the “Device Manager GUI” section on page 1-8). For details on these features, see the chapters on Customization, Monitoring, and Troubleshooting. Note For enhanced switch features that are available only through Network Assistant and not through the device manager GUI, see the “Cisco Network

  • Chapter 1 Introduction Features and Benefits 1-8 User Guide for the Catalyst Express 500 Switches OL-8122-01 Device Manager GUI The device manager is a graphical device management tool for configuring, monitoring, and troubleshooting the switch (Figure 1-3). It simplifies configuration tasks with features such as Express Setup and Smartports for quickly setti

  • Cisco Catalyst Express 500, Chapter 1 Introduction System Requirements 1-10 User Guide for the Catalyst Express 500 Switches OL-8122-01 Figure 1-4 Device Manager Online Help System Requirements • Hardware Requirements, page 1-11 • Software Requirements, page 1-11

  • Cisco Catalyst Express 500, 1-11 User Guide for the Catalyst Express 500 Switches OL-8122-01 Chapter 1 Introduction Switch Management Options Hardware Requirements Table 1-2 lists the minimum hardware requirements for running the device manager. Software Requirements Table 1-3 lists the supported operating systems and browsers for using the device manager. The device manager verifies the browser version when starting a session to ensure that the browser is supported. You should disable any pop-up blockers or proxy settings in your bro

  • Cisco Catalyst Express 500, Chapter 1 Introduction Switch Management Options 1-12 User Guide for the Catalyst Express 500 Switches OL-8122-01 Cisco Network Assistant The switches support the Cisco Network Assistant network management application. Network Assistant offers an enhanced set of features for configuring and monitoring one or more devices, including switches, device clusters, device stacks, routers, and access points. Catalyst Express 500 features that are available on Network Assistant but not available from the device manager include: • Levels (Low

  • 1-13 User Guide for the Catalyst Express 500 Switches OL-8122-01 Chapter 1 Introduction Supported Hardware Simple Network Management Protocol You can use Simple Network Management Protocol (SNMP) management applications to manage the switch. You also can manage it from an SNMP-compatible workstation. Supported Hardware The switches support the PWR675-AC-RPS RP

Related Products and Documents (Switch):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Nortel BCM 4.0 Operation & user’s manual nortel/bcm-4-0-O2H.pdf 04 May 2023 14
2 Philips 403404816 Specifications philips/403404816-O1Q.pdf 09 Jan 2023 2 0.41 Mb
3 Philips DVD Directions for use manual philips/dvd-X54.pdf 19 Sep 2022 56 1.41 Mb
4 Sony PCG-SRX51P/A Operation & user’s manual sony/pcg-srx51p-a-C19.pdf 17 Oct 2022 123 1.98 Mb
5 Trust PW-1300P Operation & user’s manual trust/pw-1300p-H68.pdf 19 Oct 2023 9 0.9 Mb
6 Panasonic PT-L759X Specifications panasonic/pt-l759x-Y87.pdf 07 Apr 2023 5 0.08 Mb

Similar Resources:

  • ATEN

    CS-62

    (1 pages)
    CS62 / CS62S2-Port PS/2 KVM SwitchDiagramFeatures © Copyright 2009ATEN® International Co., Ltd. All brand names and trademarks are the registered property of their respective owners. 2009. Version 1.0Headquarters ATEN International CO., Ltd. 3F, No.125, Sec. 2, Datung Rd. Sijhih City, Taipei 221, TaiwanTel: 886-2-8692-6789 Fax: 886-2-8692-6767 …
  • IBM

    SAN32M-2

    (8 pages)
    IBM TotalStorage SAN32M-2 fabricswitchDesigned for high-performance, scalable and simple-to-usemedium to enterprise SAN environmentsHighlights■Simple-to-use SAN switch withease-of-installation and ease-of-use features designedspecifically for the needs ofmedium-sized and enterpriseenvironments■Foundation for new infrastruc-ture simplification and busin …
  • Tripp Lite

    0SU70033

    (8 pages)
    PX Serial - Quick Start Guide1. IntroductionTo take advantage of the full range of features, we recommend you read the softcopyUser Guide after performing the Quick Start procedure. It’s in PDF format on thesupplied CD or on our website www.minicom.com in the Support section.PX Serial is a one-port RS232/422/485 to Redundant Ethernet device server. PXSeria …
  • CTC Union

    FRM220A-1002ES

    (4 pages)
    CTC Union Technologies Co.,Ltd. Far Eastern Vienna Technology Center (Neihu Technology Park) 8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E [email protected] [email protected] [email protected] H www.ctcu.com 2012 CTC Union Technologies Co., LTD. All trademarks are the property of their …
  • Eaton

    COOPER POWER SERIES

    (12 pages)
    600 A U-OP visible break connector system operation instructionsCOOPER POWERSERIESDeadbreak Apparatus Connectors MN650022ENEffective March 2016Supersedes S600-14-1 June 2010 …
  • Bryant

    582A

    (40 pages)
    CONTENTSPageSAFETY CONSIDERATIONS ........................1GENERAL ......................................1-3RECEIVING AND INSTALLATION .................4-14I. Step 1 — Check Equipment ..................4II. Step 2 — Provide Unit Support ...............4III. Step 3 — Field Fabricate Ductwork ............4IV. Step 4 — Provide Clearances ............... …

Comments, Questions and Opinions: