Manualios.com

Cisco 1232AG - Aironet - Wireless Access Point Hardware Installation Manual

  • 1232AG - Aironet - Wireless Access Point Wireless Router
  • macY39ccKR3kE
  • Hardware Installation Manual
  • PDF / Adobe Acrobat Reader
  • 128

Cisco 1232AG - Aironet - Wireless Access Point Manual Online:

3.45, 779 votes
Cisco 1232AG - Aironet - Wireless Access Point User Manual
Cisco 1232AG - Aironet - Wireless Access Point User Guide
Cisco 1232AG - Aironet - Wireless Access Point Online Manual

Text of Cisco 1232AG - Aironet - Wireless Access Point User Guide:

  • Cisco 1232AG - Aironet - Wireless Access Point, ix Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Preface Audience This guide is for the networking professional who installs and manages the Cisco Aironet 1200 Series Access Point, hereafter referred to as the access point. To use this guide, you should have experience working with the Cisco IOS software and be familiar with the concepts and terminology of wireless local area networks. Purpose This guide provides the information you need to install and configure basic settings for your access point. For information on using IOS commands to configure your access point, re

  • Cisco 1232AG - Aironet - Wireless Access Point, Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Cisco Aironet 1200 Series Access Point Hardware Installation Guide Customer Order Number: Text Part Number: OL-4310-01

  • Cisco 1232AG - Aironet - Wireless Access Point, 1-5 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 1 Overview Network Configuration Examples Network Configuration Examples This section describes the access point’s role in three common wireless network configurations. The access point’s default configuration is as a root unit connected to a wired LAN or as the central unit in an all-wireless network. The repeater role requires a specific configuration. Root Unit on a Wired LAN An access point connected directly to a wired LAN provides a connection poin

  • Cisco 1232AG - Aironet - Wireless Access Point, 4-5 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 4 Using the Web-Browser Interface Using Online Help Character Restrictions in Entry Fields Because the 1200 series access point uses Cisco IOS software, there are certain characters that you cannot use in the entry fields on the web-browser interface. Table 4-2 lists the prohibited characters and the fields in which you cannot use them. Using Online Help Click the help icon at the top of any page in the web-browser interface to display o

  • Cisco 1232AG - Aironet - Wireless Access Point, CHAPTER 6-1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 6 Mounting Instructions This appendix provides instructions for mounting the access point to suspended ceilings, vertical surfaces, or horizontal surfaces using the access point mounting bracket. The following sections are included in this chapter: • Overview, page 6-2 • Mounting on a Horizontal or Vertical Surface, page 6-3 • Mounting on a Suspended Ceiling, page 6-4 • Attaching the Access Point to the Mounting Bracket, page 6-5 • Securing the Access Point to the M

  • Cisco 1232AG - Aironet - Wireless Access Point, 5-9 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 5 Using the Command-Line Interface Accessing the CLI Note In Windows 2000, the Telnet window does not contain drop-down menus. To start the Telnet session in Windows 2000, type open followed by the access point’s IP address. Step 3 In the Host Name field, type the access point’s IP address and click Connect. Step 4 At the username and password prompts, enter your administrator username and password. T

  • Cisco 1232AG - Aironet - Wireless Access Point, 2-8 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 2 Installing the Access Point Connecting the Ethernet and Power Cables Powering Up the Access Point When power is applied to the access point, it begins a routine power-up sequence that you can monitor by observing the three LEDs on top of the access point. After you observe all three LEDs turning green to indicate the starting of the IOS operating system, the Status LED blinks green signifying that IOS is operational. When in an operational status, the Ethernet LED is steady green when no traffic is

  • D-3 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Appendix D Channels and Antenna Settings Channels IEEE 802.11b The channel identifiers, channel center frequencies, and regulatory domains of each IEEE 802.11b 22-MHz-wide channel are listed in Table D-2. Note Mexico is included in the Americas regulatory domain; however, channels 1 th

  • Cisco 1232AG - Aironet - Wireless Access Point, Glossary GL-3 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 E EAP Extensible Authentication Protocol. An optional IEEE 802.1x security feature ideal for organizations with a large user base and access to an EAP-enabled Remote Authentication Dial-In User Service (RADIUS) server. Ethernet The most widely used wired local area network. Ethernet uses carrier sense multiple access (CSMA) to allow computers to share a network and operates at 10, 100, or 1000 Mbps, depending on the physical la

  • Cisco 1232AG - Aironet - Wireless Access Point, Glossary GL-4 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 M MAC Media Access Control address. A unique 48-bit number used in Ethernet data packets to identify an Ethernet device, such as an access point or your client adapter. modulation Any of several techniques for combining user information with a transmitter’s carrier signal. multipath The echoes created as a radio signal bounces off of physical objects. multicast packet A single data message (packet) sent to multiple add

  • Cisco 1232AG - Aironet - Wireless Access Point, Index IN-2 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 F FCC Declaration of Conformity B-2 FCC Safety Compliance 2-2 filtering show and more command output 5-8 frequencies D-2, D-3 frequency range C-2 G global configuration mode 5-2 H help, for the command line 5-3 history changing the buffer size 5-4 described 5-4 disabling 5-5 recalling commands 5-5 Home button 4-4 I indicators 9-2 input power C-1 installation guidelines 2-3 interface configuration mode 5-2

  • Cisco 1232AG - Aironet - Wireless Access Point, xiii Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Preface Obtaining Documentation You can access the Cisco website at this URL: http://www.cisco.com International Cisco websites can be accessed from this URL: http://www.cisco.com/public/countries_languages.shtml Documentation CD-ROM Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more curre

  • Cisco 1232AG - Aironet - Wireless Access Point, xv Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Preface Obtaining Additional Publications and Information Cisco TAC Website The Cisco TAC website provides online documents and tools to help troubleshoot and resolve technical issues with Cisco products and technologies. To access the Cisco TAC website, go to this URL: http://www.cisco.com/tac All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website. Some services on the Cisco TAC website require a Cisco.com login ID and password. If you have a valid service contract but do not have a l

  • 6-5 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 6 Mounting Instructions Attaching the Access Point to the Mounting Bracket Follow these steps to mount your access point on a suspended ceiling: Step 1 Decide where you want to mount the access point. Step 2 Attach two caddy fasteners to the suspended ceiling T-rail. Step 3 Use the mounting bracket t

  • 6-3 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 6 Mounting Instructions Mounting on a Horizontal or Vertical Surface A mounting hardware kit is provided that contains the hardware and fasteners necessary to mount the access point. Refer to the Table 6-1 to identify the materials you need to mount your access point, the

  • Cisco 1232AG - Aironet - Wireless Access Point, 8-5 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 8 5-GHz Radio Module Upgrade Installing a 5-GHz Radio Module Installing a 5-GHz Radio Module To install a new 5-GHz radio module into your access point, follow these steps: Step 1 Before you can install a new 5-GHz radio module, you must remove the access cover or an existing 5-GHz radio module (refer to “Removing the 5-GHz Radio Access Cover” or “Removing a 5-GHz Radio Module”). Step 2 Place the access point on a flat surface so that the unit is upright with the front end facing you. Step 3 Grasp the new 5-GHz radio module by it’s base (with the

  • Cisco 1232AG - Aironet - Wireless Access Point, Glossary GL-2 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 C CCK Complementary code keying. A modulation technique used by IEEE 802.11b-compliant wireless LANs for transmission at 5.5 and 11 Mbps. cell The area of radio range or coverage in which the wireless devices can communicate with the base station. The size of the cell depends upon the speed of the transmission, the type of antenna used, and the physical environment, as well as other factors. client A radio device that uses the services of an Access Point to communicate wirelessly with other devices on a local area network. CSMA Carrier sens

  • Cisco 1232AG - Aironet - Wireless Access Point, xii Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Preface Related Publications Related Publications These documents provide complete information about the access point: • Release Notes for 1200 Series Access Points • Cisco Aironet 1200 Series Access Point Command Reference • Cisco IOS Software Configuration Guide for Cisco Aironet Access Points Click this link to browse to the Cisco Aironet documentation home page: http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm To browse

  • 4-2 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 4 Using the Web-Browser Interface Using the Web-Browser Interface for the First Time Using the Web-Browser Interface for the First Time Use the access point’s IP address to browse to the management system. See the “Obtaining and Assigning an IP Address” section on page 3-3 for

  • IN-1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 INDEX A abbreviating commands 5-3 access point image 9-6 antenna connectors C-2 gains D-5 warnings A-1 Apply button 4-4 B Back button 4-4 basic settings, checking 9-4 C Cancel button 4-4 channels, supported by regulatory domains D-2, D-3 Cisco TAC 9-1 CLI abbreviating commands 5-3 command mode

  • GL-1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 GLOSSARY 802.11 The IEEE standard that specifies carrier sense media access control and physical layer specifications for 1- and 2-megabit-per-second (Mbps) wireless LANs operating in the 2.4-GHz band. 802.11a The IEEE standard that specifies carrier sense media access control and phy

  • Cisco 1232AG - Aironet - Wireless Access Point, 3-12 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 3 Configuring the Access Point for the First Time Assigning an IP Address Using the CLI Step 6 Click Set Parameters to change the access point’s IP address and SSID settings. Step 7 Click Exit to exit IPSU. Assigning an IP Address Using the CLI When you connect the access point to the wired LAN, the access point links to the network using a bridge virtual interface (BVI) that it creates automatically. Instead of tracking separate IP addres

  • Cisco 1232AG - Aironet - Wireless Access Point, 5-3 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 5 Using the Command-Line Interface Getting Help Getting Help You can enter a question mark (?) at the system prompt to display a list of commands available for each command mode. You can also obtain a list of associated keywords and arguments for any command, as shown in Table 5-2. Abbreviating Commands You have to enter only enough characters for the access point to recognize the command as unique. This example shows how to enter the show configuration privileged EXEC command: ap# show conf Using no and default Forms of Commands Mo

  • Cisco 1232AG - Aironet - Wireless Access Point, CHAPTER 1-1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 1 Overview Cisco Aironet 1200 Series Access Points (hereafter called access points) provide a secure, affordable, and easy-to-use wireless LAN solution that combines mobility and flexibility with the enterprise-class features required by networking professionals. With a management system based on Cisco IOS software, the 1200 series is a Wi-Fi certified, 802.11b-compliant, and 802.11a-compliant wireless LAN transceiver. The 1200 series access point can contain two radios: a 2.4-GHz radio in an internal mini-PCI slot and a 5-GHz radio module in an external, modified cardbus slot. T

  • Cisco 1232AG - Aironet - Wireless Access Point, C-1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 APPENDIX C Access Point Specifications This appendix provides technical specifications for the Cisco Aironet 1200 Series Access Point. Table C-1 lists the technical specifications for the access point. Table C-1 Access Point Specifications Category Access Point with 2.4-GHz Radio Access Point with 5-GHz Radio Module Size 6.56 in. W x 7.23 in. D x 1.66 in. H 16.67 cm W x 18.36 cm D x 4.22 cm H With the 5-GHz antenna in the patch position: 6.56 in. W x 8.04 in. D x 2.21 in. H 16.67 cm W x 20.42 cm D x 5.61 Status Indicators Three

  • Cisco 1232AG - Aironet - Wireless Access Point, B-3 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Appendix B Declarations of Conformity and Regulatory Information Department of Communications—Canada Department of Communications—Canada Canadian Compliance Statement This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harm

  • Cisco 1232AG - Aironet - Wireless Access Point, A-4 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Appendix A Translated Safety Warnings Lightning Activity Warning Lightning Activity Warning Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. Varoitus Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmalla. Attention Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage. W

  • Cisco 1232AG - Aironet - Wireless Access Point, CHAPTER 4-1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 4 Using the Web-Browser Interface This chapter describes the web-browser interface that you can use to configure the access point. It contains these sections: • Using the Web-Browser Interface for the First Time, page 4-2 • Using the Management Pages in the Web-Browser Interface, page 4-2 • Using Online Help, page 4-5 The web-browser interface contains management pages that you use to change access point settings, upgrade firmware, a

  • Cisco 1232AG - Aironet - Wireless Access Point, 6-2 Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-01 Chapter 6 Mounting Instructions Overview Overview You can mount the access point on any of the following surfaces: • Horizontal or vertical flat surfaces, such as walls or ceilings • Suspended ceilings The access point ships with a detachable mounting bracket and the necessary mounting hardware. Because it is detachable, you can use the mounting bracket as a template to mark the positions of the mounting

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Land Pride 312-517M Operator's manual land-pride/312-517m-5FH.pdf 09 Mar 2024 46
2 AEG OKO-Lavamat 605 Electronic Operating instructions manual aeg/oko-lavamat-605-electronic-2P3.pdf 22 Dec 2022 32 0.85 Mb
3 Giant YUKON Specifications giant/yukon-3EM.pdf 19 Aug 2022 1 0.21 Mb
4 NEC AccuSync LCD19V Specifications nec/accusync-lcd19v-8FZ.pdf 20 Aug 2022 2
5 Sennheiser HME 25-1 Datasheet sennheiser/hme-25-1-AY3.pdf 01 Jul 2023 1 0.32 Mb
6 Xantech SMAUD01 Installation instructions manual xantech/smaud01-743.pdf 25 Mar 2023 8 0.4 Mb

Similar Resources:

  • Cisco

    E1500

    (2 pages)
    Linksys E1500 | Wireless-N Router with SpeedBoostEnhanced performance for everyday activities, ideal for:• Moderate-sized homes• Surng the web, emailing and printing wirelessly• Connecting multiple devices• Transferring and downloading large lesThe Cisco Advantage· Cutting edge technology from the networking leader· Best-in-class securi …
  • Ubiquiti

    UniFi

    (20 pages)
    UniFi LED PanelPackage ContentsSystem RequirementsAn 802.3at-compliant network switchUniFi LED mobile app softwareMobile device: iOS 10 or Android 5.0UniFi LED Controller softwareComputer: UniFi Application Server (UAS) 0.5.0, Ubuntu 16.04 LTS (Xenial Xerus)64-bit or Debian 9 64-bitWeb browser: Google Chrome (Other browsers may have limited functionality.)Un …
  • Onkyo

    UWF-1

    (11 pages)
    Wireless USB adapterUWF-1Instruction ManualManuel d’instructionsManual de InstruccionesManuale di istruzioniBedienungsanleitungGebruiksaanwijzingBruksanvisning使用手冊使用手册取扱説明書EnglishFrançaisEspanõlItalianoDeutschNederlandsSvenska繁體中文简体中文日 本 語En Fr Es De It Nl Sv Ct Cs Ru Ja ArUWF-1.book Page 1 Tuesday, …
  • NETGEAR

    WPN111

    (2 pages)
    )NSTALLATION'UIDERangeMax™ WPN111 Wireless USB 2.0 AdapterThese basic setup instructions assume that you will connect to an access point, and you are not using WEP security. Please refer to the online help and the Reference Manual on your CD for instructions on configuring WEP, Ad-hoc mode, or advanced options.Estimated Completion Time: 5-15 minute …
  • D-Link

    DVA-2800

    (6 pages)
    Setup Guide – D-Link DVA-2800 1300 467 283 [email protected] www.gointernet.net.au Valid as of 20th May, 2021 This guide will step you through how to configure your DVA-2800. These settings reflect the standard configuration we ship our router/modems with, make sure to follow these i …
  • HP

    Ew2400 - JetDirect Print Server

    (1 pages)
    Product Update NoteDC power supply modules that may be specified in your HP Jetdirect product documentation have been replaced by new power supply modules identified below. The new modules comply with HP specifications for the Reduction of Hazardous Substances (RoHS). When ordering a replacement power module, please specify an appropriate HP RoHS-compliant p …

Comments, Questions and Opinions: