Manualios.com

Compaq 5525B Operation & User’s Manual

Compaq 5525B Manual Online:

3.8, 2398 votes
Compaq 5525B User Manual
Compaq 5525B User Guide
Compaq 5525B Online Manual

Text of Compaq 5525B User Guide:

  • Compaq 5525B, Compaq ® makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Compaq shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contain

  • Compaq 5525B, Changing Parameters Example 65 Step Press LCD Notes 1. Make sure the printer is on. Raise the printer cover. 2. OFFLINE CONFIG. CONTROL 3. ENTER SWITCH UNLOCKED Allows you to make configuration changes. OFFLINE CONFIG. CONTROL 4. OFFLINE PRINTER CONTROL 5. PRINTER CONTROL Unidirectional 6. Unidirectional Disable* 7. Unidirectional Enable Cycle through the choices. 8. Unidirectional Enable* The * indicates this choice is active. 9. PRINTER CONTROL Unidirectional 10. PRINTER CONTROL Slow Paper Slew 11. Slow Paper Slew Disable* 12. Slow Paper Slew Enable Press until the desired parameter displays. ON LINE + UNTIL OR ENTER UNTIL OR

  • Compaq 5525B, Chapter 5 Configuring the Internal Ethernet Adapter for TCP/IP 154 Configuration Through the Network with RARP The RARP daemon provides a mechanism for dynamic IP address assignment. When a RARP-configured TCP/IP host boots, it broadcasts a RARP request for an IP address. Your network must have this daemon running on some host. If you do not know whether your network has one, ask your system administrator or configure the Internal Ethernet Adapter with one of the other methods in this section. To configure the Internal Ethernet Adapter with RARP you need to: 1. Make an entry in the /etc/ethers file for the new Internal Ethernet Adapter: 00:80:72:00:AB:CD:spike entr

  • Compaq 5525B, Chapter 4 EMULATION 94 Rotated Alphanumerics permit new concepts in form design. Normal, expanded, and compressed character strings can be rotated 90 degrees clockwise or counterclockwise, or they can be printed upside down. Reversed Print permits highlighting and contrasting by printing white characters on a dark background. Automatic Increment/Decrement Capability allows batch form processing. You can identify individual numeric and bar code data fields, which includes automatic increment or decrement functions. Scaling Capability permits graphic elements, such as corners or boxes, to retain their physical shapes and sizes when printed i

  • Compaq 5525B, Chapter 6 Cleaning Requirements 196 Interior Cleaning Over time, particles of paper and ink accumulate inside impact printers. This is normal. Paper dust and ink build-up must be periodically removed to avoid degraded print quality. Most paper dust accumulates around the ends of the platen and ribbon path. Legend: 1) Base Casting 2) Splined Shaft 3) Paper Support (2) 4) Tractor 5) Forms Thickness Lever 6) Ribbon Guide (2) 7) Shuttle Cover Assembly 1 7 2 3 4 5 6

  • Compaq 5525B, Chapter 4 EMULATION 88 Auto LF This option defines the printer actions when print data is received past the forms width setting. • Enable. Performs an automatic carriage return and line feed when data is received past the forms width. • Disable. Discards any data past the forms width. Define LF Code • LF = LF. Does not perform an automatic carriage return when a line feed command is received. The next print position will be the current print position of the next line. • LF = CR + LF. Forces an automatic carriage return with each line feed command received. The next print position is print position 1 of the next line. FF Valid at TOF • Enable. Performs a form f

  • Chapter 2 Install Basic Components 34 Load the Paper When you start this procedure, verify that the printer cover is open, the forms thickness lever is raised, and the tractor doors are open. (See “Printer Component Locations” on page 18). Legend: 1) Edge Of Paper 2) Box 1. For cabinet models, align the paper supply with the label on the floor. Make sure that the paper pulls freel

  • Compaq 5525B, Pedestal Model 29 8. Guide the power cord up through the hole in the lower right back corner of the cabinet (see Figure 5). Thread the power cord inside the bracket where the gas spring is attached. 9. Plug the power cord into the printer AC power connector, then into the AC power outlet. Pedestal Model Legend: 1) Parallel Connector 2) Auxiliary I/O 3) Serial Connector 4) Power Switch 5) AC Power Connector 1. Make sure the printer power switch is set to O (OFF). 2. Remove the cover from the I/O connector you have

  • 19 Legend: 1) Hub Latch 2) Ribbon Spool 3) Horizontal Adjustment Knob 4) Tractor Lock 5) Paper Scale 6) Splined Shaft 7) Paper Support 8) Tractor 9) Hammer Bank Cover and Ribbon Mask 10) Vertical Position Knob 11) Forms Thickness Lever 12) Ribbon Guide 13) Ribbon Loading Path Diagram Remove Packing Materials CAUTION To avoid shipping damage, reinstall th

  • Compaq 5525B, Compiling Host Software 147 Compiling Host Software Some compilation may be needed before adding setups to your host unless you have Sun  OS 4.1.x, Solaris  2.x, or SCO UNIX  . Pre- compiled binaries are provided for these. npconfig can be used to do the compilation, or you can try and compile each program independently. For the npconfig method perform the following steps: 1. Select Detailed Configuration Options... from the npconfig Main Menu. 2. Select Manage Host Software... from the Options Submenu. 3. Select Compile Host Software and answer the prompts until compiled. For more information on the provided host software, see the foll

  • Compaq 5525B, Interior Cleaning 197 To clean the interior of the printer perform the following steps. 1. Power off the printer and unplug the printer power cord. 2. Open the printer cover. Fully raise the forms thickness lever. Unload paper. 3. Unlatch both ribbon spools and carefully lift them off the hubs. Raise the ribbon out of the ribbon path. 4. Using a soft-bristled, non-metallic brush (such as a toothbrush), brush paper dust and ribbon lint off the tractors, shuttle cover assembly, base casting, and ribbon guides. Vacuum up the residue. CAUTION Vacuum carefully around the hammer bank and surrounding area to avoid dam

  • Chapter 3 Operational Procedures 48 4. Locate the paper slot and feed the paper up through it (see Figure 11). It may be easier to feed one corner of the new paper up through the slot first. When this corner can be grasped from the top, rotate the paper back to the normal position. NOTE: If you are using thick, multi-part forms and are unable to load the new pa

  • Compaq 5525B, 5 Table of Contents 1 Introduction............................................. 11 Printer Overview ..................................................................11 The Printer Family.........................................................11 Conventions in This Manual..........................................12 Warnings and Special Information ................................13 Related Documents.......................................................13 Graphics Enhancements...............................................13 Taking Care of Your Printer ..........................................1

  • Compaq 5525B, P-Series Emulation 85 Overstrike • Enable. Common dots appear darker in characters printed over each other, as shown below. The print position moves one-half dot to the right. Overstrike printing occurs at a decreased speed. • Disable. If you are using a control code for overstrike, but it is disabled in the printer control panel, no bolding will occur. Define LF Code • LF = CR + LF. Forces an automatic carriage return with each line feed command. The next print position is print position 1 of the next line. • LF = LF. Does not perform an automatic carriage return. The next print position will be the current print position of the n

  • Compaq 5525B, Chapter 4 HOST INTERFACE 120 IEEE 1284 Parallel (Bidirectional) Submenu The IEEE ® 1284 interface supports bidirectional communication. Configuration of this interface is controlled from the host. Prime Signal • Enable. The parallel port will perform a warm start (reboot) if the host asserts the Prime Signal. • Disable. The parallel port will not perform a warm start (reboot) if the host asserts the Prime Signal. TOF Action • Reset. A form feed is performed before a warm start when the prime signal is asserted from the host. This setting

  • NetWare 4 Options 181 Table 13. PSERVER Setup (NetWare 4) Step Action Result of Action 1. Log in to Novell as supervisor. Gives you supervisor rights. 2. Enter PCONSOLE. PCONSOLE’s Main Menu displays. 3. Press F4. Puts you into bindery emulation mode and displays Main Menu. 4. Select PRINT QUEUES. List of currently defined queues comes up. 5. Press <Insert&g

  • Compaq 5525B, Chapter 2 Printer Component Locations 18 Printer Component Locations Familiarize yourself with the names and locations of the printer components, shown in Figure 3, before continuing with the rest of the installation procedure. Figure 3. Printer Component Locations 1 2 3 4 5 6 7 8 9 10 11 12 13

  • Compaq 5525B, Index 228 ERROR DRAM AT ADDRESS XXXXXXXX, 216 ERROR EC PROGRAM NOT VALID, 216 ERROR EC STOPPED AT STATE XXXX, 216 ERROR FLASH NOT DETECTED, 217 Error Handling, 108 Error markers, 108 Error messages See Fault messages, 200 ERROR NO DRAM DETECTED, 216 ERROR NVRAM FAILURE, 217 ERROR PROGRAM NEEDS MORE DRAM, 217 ERROR PROGRAM NEEDS MORE FLASH, 217 ERROR PROGRAM NOT COMPATIBLE, 217 ERROR PROGRAM NOT VALID, 217 ERROR SECURITY PAL NOT DETECTED, 217 ERROR SHORT AT ADDRESS XXXX, 217 ERROR WRITING TO FLASH, 216, 217 ERROR WRONG CHECKSUM, 21

  • Compaq 5525B, Chapter 5 Configuring the Internal Ethernet Adapter for Windows 192 Windows 95 NetBIOS Using Print Manager Method NOTE: This setup assumes that you have already created a local printer using the Add a New Printer icon in the Settings:Printer folder. You can use any port here such as LPT1 or LPT2 when creating this printer. NOTE: In order to use this method, you must first configure the Internal Ethernet Adapter with a Microsoft Networks Workgroup name. This can be done by teleneting to the Internal Ethernet Ad

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 JVC 0503-FO-ID-VP Instructions manual jvc/0503-fo-id-vp-434.pdf 16 Jan 2024 114
2 AOC e2250Swn Service manual aoc/e2250swn-627.pdf 03 Jul 2022 55
3 VTech Monster Fun Operation & user’s manual vtech/monster-fun-C5C.pdf 12 Jan 2023 18 0.36 Mb
4 Philips SRU3003 Specifications philips/sru3003-68Z.pdf 09 Sep 2022 2 0.48 Mb
5 ATCOM AT800 Series Quick start manual atcom/at800-series-417.pdf 31 Mar 2023 7 0.91 Mb
6 Philips 32PF5520D Operation & user’s manual philips/32pf5520d-3ZZ.pdf 06 Aug 2022 34 1.67 Mb

Similar Resources:

  • Xerox

    WorkCentre 5845

    (83 pages)
    Document Version 2.0, Revision 2.0 Xerox Multi-Function Device Security Target WorkCentre 5845, 5855, 5865, 5875, 5890, 7220, 7225, 7830, 7835, 7845, 7855 & ColorQube 9301, 9302, 9303 Prepared by: Xerox Corporation Computer Sciences Corporation 800 Phillips Road 7231 Parkway Drive Webster, New York 14580 Hanover, Maryland 21076 …
  • Oki

    C5800Ldn

    (2 pages)
    The optimum balance of speed and reliability for increased productivity in demanding businessesFor professionals who keep a close eye on their image as well as their time, the C5800Ldn Digital Color printer is the ideal solution. It combines fast, high-quality color output, automatic duplex (2-sided) printing, and the legendary reliability for which OKI Prin …
  • Vinpower

    PANDORA SERIES

    (2 pages)
    PANDORAAUTO-PRINTERPackage ContentsRobotic Disc LoaderPower AdapterSerial to USB Data CableLicense Dongle (Include disc loader software)Device Plate (2 pcs) / Metal Bar (2 pcs) / Screws (8 pcs) / non-slip material (4 pcs)SpindleDisc Bin (50 Discs Capacity) / 1 pcDisc Bar (50 Discs Capacity) / 4 pcsDisc Bin (100 Discs Capacity) / 1 pcDisc Bar (100 …
  • HP

    M401nw

    (12 pages)
    ENInstallation GuideFRGuide d'installationESGuía de instalaciónPTGuia de instalaçãoHE*CF285-90901**CF285-90901*CF285-90901 Rev. AESLea esto primeroLASERJET PRO 400M401nM401nw …
  • Canon

    BJC-55

    (249 pages)
    SERVICE BULLETINCOMP. SYSTEMSIssued by Canon Europa N.V.MODEL:BJC-55No.: PRNT-896(QK-12E-0129)Date: 29.09.00LOCATION: MAIN UNITSUBJECT: DIFFERENCES BETWEEN BJC-50 AND BJC-55DETAILThis bulletin has been issued to notify of the differences between the BJC-50/50v and BJC-55/BJ M40for servicing. This has been issued as a substitute for the Service Manual, which …
  • Samsung

    UN50EH6000FXZA

    (16 pages)
    - 1 -Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.Important Warranty Information Regarding Television Format Viewing ✎ See the warranty card for more information on warranty terms.Wide screen format LED Displays ( …

Comments, Questions and Opinions: