Manualios.com

COMPRO VISTA T100 - START UP GUIDE Manual 

COMPRO VISTA T100 - START UP GUIDE Manual Online:

3.7, 1034 votes
COMPRO VISTA T100 - START UP GUIDE User Manual
COMPRO VISTA T100 - START UP GUIDE User Guide
COMPRO VISTA T100 - START UP GUIDE Online Manual

Text of COMPRO VISTA T100 - START UP GUIDE User Guide:

  • COMPRO VISTA T100 - START UP GUIDE, 18 ComproDTV Vista Gadget Tool for Vista The Compro gadget tool is designed to provide the more convenient TV experience in Windows Vista. It will be installed from the Compro installation CD, and you can delete and add it from gadget setup. Note 1. Vista Gadget is meant for Vista 32 bit operation system only. 2. Vista Gadget Tool needs the channel table from ComproDTV 4. Please autoscan all the available digital channels in ComproDTV 4. Then you can use the Vista Ggadget Tool. 3. If there is no picture when you click the live TV button, please right-click the mouse button and select the video source you want. UI Control DTV Gadget has th

  • 10 Note For best performance, the VideoMate Vista T220 PCI card should not share its IRQ. For more information, please see the Troubleshooting section. If the computer cannot be turned on, verify the position of the power patch cable on the mainboard. Consult the mainboard documentation to determine the position of the ATX power switch connector. Power Up

  • COMPRO VISTA T100 - START UP GUIDE, 9 5. Connect the black socket of Power Up patch cable to the power switch connector on the mainboard. 6. Connect the white socket of Power Up patch cable to the connector named “JS2” on the VideoMate Vista T220 PCI Tuner card. Note Double check your work. If you plug the cables into the incorrect pins, your PC may not start or otherwise function improperly. Connect the white end of the Power Up patch cable to the TV tuner card and the black end to the mainboard. Power Up Scheduling is not required for using VideoMate Vista T220

  • COMPRO VISTA T100 - START UP GUIDE, 31 My PC cannot shut down? In rare circumstances, the VideoMate Vista T220 PCI card must be reset. Unplugging the AC power cord from the PC case for 10 seconds will reset the card. When you set up for scheduled recording, VideoMate Vista T220 PCI card will issue the Power Up signal to the computer until ComproDTV 4 starts. If your computer cannot start ComproDTV 4 for some reason, the TV tuner card will try to wake up PC even while you shut it down. Unplug the main power cord to reset VideoMate TV card. You can shut down the computer normally after that. Other possible causes of this problem include: 1. If you have a multi-Boot system

  • COMPRO VISTA T100 - START UP GUIDE, 26 place. When you reinstall the ComproDTV 4 or your system, you can import the previous channel list and save your time for resetting it. Using my favorite channel list You can click to select using my favorite channel list from option window. And exit the list by yourselves to makes channel switch more convenient. Channel Surfing While watching TV, the channel surfing feature displays a 4x4 grid of channel images to give you an overview of available programming. Double click the channel screen can direct jump to the channel you want. PIP/POP mode Usually, digital TV station broadcasts multiple programs on one frequency. Therefor

  • COMPRO VISTA T100 - START UP GUIDE, 16 Remote Power On/Off (Only for Vista T220) Introduction Compro has always focused on developing products of great convenience. VideoMate Vista T220 PCI card features the Remote Power On/Off function for greater convenience. This section explains the details. Integration of hardware and software support, you can start your computer from the shut down state by pressing a button on the remote keypad. You don’t need to reach over to your computer anymore. You can also shut down the computer by remote control as well. No more mouse click on the screen. This feature conv

  • COMPRO VISTA T100 - START UP GUIDE, 8 Hardware Installation Warning Unplug your PC’s main power cord before installing VideoMate Vista T220/T100 PCI card. Failure to do so may cause damage to your VideoMate Vista T220/T100 PCI card and void your warranty. 1. Shut down your computer and unplug main power cord. 2. Remove the computer case cover. Power Up Connections (Step 3-6 only suitable for Vista T220 for power up setup) 3. Locate the ATX power switch pins on your computer case and trace the wires to the power switch connector on your mainboard. The ATX power switch cable is normally a twisted pair cable with a two-pin connector as shown above. Note On the mainboard, the ATX power switch pins are

  • COMPRO VISTA T100 - START UP GUIDE, 19 If clicking any files, the gadget will change to play mode from playlist mode, then playing the file you clicked. Scheduler list mode: This mode will display the top 5 of your current scheduled list, you can click any of the scheduled item and check the detail information of it. The last mode is schedule view which has two different parts. First, there is a table that has five rows; it means that schedule view will allow the first five schedules in the list. Second, if clicking the item, it will change to another

  • COMPRO VISTA T100 - START UP GUIDE, 29 Troubleshooting OS requirement VideoMate Vista T220/T100 PCI card has to work on Windows XP SP2 or Vista. You are welcome to www.WindowsUpdate.com website for the Service Pack update of Microsoft. Driver Installation The most common cause of problems with the TV Tuner Card is incorrect installation of the TV capture and TV tuner drivers. If you have problems watching, recording, or timeshifting live TV, please check the status of the drivers with Device Manager. You should see " VideoMate TV SAA7130 Hybrid Capture Device" drivers, in the "Sound, video and game controllers" se

  • COMPRO VISTA T100 - START UP GUIDE, 14 Windows Media Center Remote for Vista T100 Compro VideoMate Vista T100 bundles the easy-to-use Microsoft certified remote control to controls the Windows Media Center and also ComproDTV software. Some keys are special designed for Windows Vista Premium/Ultimate, it may not be used in Windows XP system. 39 Timeshift Play/Pause Play/Pause 40 Change scale of screen Skip Forward 41 ----- ----- 42 Channel surf ----- 43 Sleep function Clear 44 ----- Zoom 45 Playlist Enter 46 C.C Language

  • 25 When Autoscan is finished, detected channels are automatically enabled and marked with the green check mark . Channels, where a valid signal could not be detected, are disabled and marked with a blank. However, you can interrupt the scanning process by pressing the Stop button. After you are finished scanning for available channels, you may select OK to return to the disp

  • 2 Table of Contents VideoMate Vista T220/T100 PCI Tuner Card ..............................3 VideoMate Vista T220 Package Contents ................................... 5 VideoMate Vista T100 Package Contents ................................... 5 VideoMate Vista T220 Connectors ..............................................6 VideoMate Vista T100 Connectors

  • COMPRO VISTA T100 - START UP GUIDE, 12 Windows Media Center Remote for Vista T220 Compro VideoMate Vista T220 bundles the easy-to-use Microsoft certified remote control to controls the Windows Media Center and also ComproDTV software. Some keys are special designed for Windows Vista Premium/Ultimate, it may not be used in Windows XP system.

  • COMPRO VISTA T100 - START UP GUIDE, 28 Recording ComproDTV 4 supports MPEG-2/H.264/TS digital TV recording. To instantly start recording: Press the Record button . ComproDTV 4 starts recording the video source currently showing in the display window. It will save it to a file on your disk. If you already start recording, you still can click the record button to setup 30, 60, 90, and 120 minutes recording immediately. Thus, you can go out without worry about the record still ongoing. Press the Stop button to stop recording. ComproDTV 4 will save it automatically and show the

  • COMPRO VISTA T100 - START UP GUIDE, 4 z 150 MB free space for software installation z ATX power supply and a computer case with a separate power switch cable from power on button. Note In order to receive digital terrestrial TV broadcast, you needs to have your own antenna which is crucial. Digital terrestrial TV broadcast uses about the same wave (UHF) as analog TV. It’s recommended to have a fishbone-like antenna on the roof for receiving. More details can be found in the troubleshooting chapter of this manual. Digital TV broadcast is different than normal analog TV.

  • 20 Gadget Settings Settings of gadget have four parts included: z Capture device : to select capture devices. (when running gadget first time or having more than one device, this item is needed) z Quality setting : to select recording quality Normal, Better, Best Quality z Record folder: a directory to place recorded files. z Snapshot folder: a directory to place pictu

  • COMPRO VISTA T100 - START UP GUIDE, 6 VideoMate Vista T220 Connectors Item Function Description 1 TV Tuner-In Connect to a TV antenna or TV cable feed. 2 IR Connect the IR receiver here. Audio-In (Blue) Use an audio patch cable to connect to an audio source, such as a VCR, DVD or VCD. External Audio-Out (Green) Use the supplied audio patch cable to connect to the Line-In port of your sound card. S-Video-In (Black) Use an S-Video patch cable to connect to a video source, such as a VCR, DVD or VCD. 3 (1 to 4 converter c

  • COMPRO VISTA T100 - START UP GUIDE, 21 HID (Human Interface Device) for Compro Remote After you install the software, you can see the remote logo show in your system bar. You can choose the “Option” to enter the setup window. Setup: Step 1: Choose the type of your remote control. (There are many type of remote from Compro, please select the remote picture as you have). Step 2: Choose one IR function you want to change. (Image below shows the remote for Vista T220) Step3: Set the IR dialog you want and press OK button.

  • COMPRO VISTA T100 - START UP GUIDE, 22 Step4: Repeat setp1 to 3 to run all the changes. You can also set a whole new program of your remote control in some particular software or window. Press “Add” button and enter the name you want. Repeat the step 1 to 4. Note If you have any Windows Media Center system in your PC, such as Windows MCE, Vista Premium, Vista Ultimate, this function can replace the windows remote control. HID can also combine the Compro software control in the MCE interface to make you more convenient. Open and close the ComproDTV 4 display panel You can open and close the ComproDTV 4 display w

  • COMPRO VISTA T100 - START UP GUIDE, 30 No digital broadcast signal In order to receive digital terrestrial TV broadcasts, an antenna is crucial. Digital terrestrial TV broadcast uses about the same wave frequencies as analog TV (UHF). It’s recommended to have a fishbone-like antenna (see figure) on the roof for reception. Make sure you position the antenna in the direction of the TV broadcast base. Adjust the position for the best reception. Digital terrestrial TV’s determined by government policy. The broadcast bases will be increased in order to cover the entire co

  • COMPRO VISTA T100 - START UP GUIDE, 15 No. Windows Media Center (MCE) ComproDTV 4 1 Into sleep mode Into sleep mode 2 Windows Media Center Windows Media Center 3 Mute Mute 4 Channel Up Channel Up/Angle 5 Channel Down Channel Down/Subtitle 6 Volume Up Volume Up 7 Volume Down Volume Down 8 More Zoom 9 Back Guide/Menu 10 OK OK 11 Up Up, Mono/SAP/Stereo 12 Down Down/snapshot 13 Right Right/forward 14 Left Left/backward 15 Play/Pause Play/Pause, Timeshift 16 Play/Pause Play/Pause, Timeshift 17 Stop/Live Stop/Live 18 Record Record 19 Fast Forward Fast Forward 20 Skip Forward Aspect Ratio 21 Skip Rewind Las

  • COMPRO VISTA T100 - START UP GUIDE, 32 Verify that the IR icon (ComproRemote) is in the system tray on the lower-right corner of the screen. If you don't have ComproRemote on the system tray, start the following program: C:\Program Files\ Common Files\VideoMate\ComproRemoteDTV.exe Then you should see the icon on the system tray. The IR icon should turn bright when you press buttons on the remote. If you see no response, please move your mouse cursor on the IR icon. If you see it shows “No Device,” your drivers may

  • COMPRO VISTA T100 - START UP GUIDE, 7 VideoMate Vista T100 Connectors Item Function Description 1 TV Tuner-In Connect to a TV antenna or TV cable feed. 2 IR Connect the IR receiver here. 3 S-Video-In (Black) Use an S-Video patch cable to connect to a video source, such as a VCR, DVD or VCD. (S-video cable not included in this package) 2 3 1

  • COMPRO VISTA T100 - START UP GUIDE, 11 Software Installation After installing the PCI card and cables in your computer, you should restart it and follow these steps to install the software. Step 1. After restarting, Windows will detect your VideoMate Vista T220/T100 PCI card and start the Add/Remove Hardware Wizard, prompting you to install the VideoMate Vista T220/T100 PCI card drivers. Please press Cancel and go to the next step. Step 2. Insert the installation CD into your CD drive. If you have Autorun enabled, the installer will sta

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sennheiser 810 Instruction manual sennheiser/810-RZE.pdf 22 Nov 2022 20 0.69 Mb
2 Novell EDIRECTORY 8.8 SP2 Troubleshooting manual novell/edirectory-8-8-sp2-4T1.pdf 06 Aug 2023 97
3 LG MS910 Datasheet lg/ms910-MSH.pdf 30 Oct 2023 2
4 Nortel 4000 Release note nortel/4000-2T1.pdf 24 Aug 2023 1
5 Pure Acoustics DREAM BOX Brochure pure-acoustics/dream-box-41I.pdf 02 Dec 2022 2
6 Frigidaire FRT18S6A Factory parts catalog frigidaire/frt18s6a-9IU.pdf 28 Jan 2023 11

Similar Resources:

  • YASKAWA

    NX100

    (54 pages)
    Motoman, Incorporated 805 Liberty LaneWest Carrollton, OH 45449TEL: (937) 847-6200FAX: (937) 847-627724-Hour Service Hotline: (937) 847-3200Motoman NX100 ControllerForm Cut Function ManualPart Number: 149648-19CDRevision: 1 …
  • Sangoma

    B700

    (5 pages)
    B700 Hybrid InstallationB700 Hybrid Telephony CardView DatasheetInstallation Manual OverviewHardware InstallationBRI Cable Wiring Software InstallationOverviewConnect up to 4 ports of plus 2 ports of or FXSBRI Analog FXO4 ports of are supported. Mix TE and NT modes, as required. Changing modes requires no jumpers—simply invert the colour-BRIcoded m …
  • NetComm

    NP7032

    (2 pages)
    NETCOMM LIMITED ABN 85 002 490 486 • 2-6 Orion Road, LANE COVE, NSW 2066 • phone 02 9424 2070 • fax 02 9424 2010 • email [email protected] MBPS IEEE 802.11b PC CARDSMALL-MEDIUM BUSINESSConnect your Notebook PC to a wireless LAN withthis 32Bit PC CardIEEE 802.11b Direct Sequence Standard CompliantDynamic data rate scaling at 11, …
  • Allo.com

    2aCP8e series

    (20 pages)
    8 Port PRI Card- Quick Installation Guide www.allo.com Version 2.1 1 …
  • Black Box

    RS-422

    (13 pages)
    CUSTOMERSUPPORTINFORMATIONOrder toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOXFREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018Web site: www.blackbox.com • E-mail: [email protected] 1993IC107ARS-23 …
  • Sandberg

    130-71

    (52 pages)
    [Item No. 130-71] Rev. 02.12.05 Sandberg Gigabit PCI System requirements • Pentium PC or compatible • 1 available PCI slot • PCI 2.1 compliancy* • CD-ROM drive or Internet connection • Windows® 98SE/Me/NT 4.0/2000/XP * “Wake-on-LAN” requires PCI 2.2 compliancy DANSK NORSK SVENSKA SUOMI ENGLISH …

Comments, Questions and Opinions: