Manualios.com

Compuprint 10300 Programmer's Manual

Compuprint 10300 Manual Online:

4.55, 869 votes
Compuprint 10300 User Manual
Compuprint 10300 User Guide
Compuprint 10300 Online Manual

Text of Compuprint 10300 User Guide:

  • Compuprint 10300, Commands 26 FF Advances paper to the top of the next page. (IBM/EPSON) ASCII Code FF Hexadecimal Value 0C Decimal Value 12 This code is a terminator code, when received, causes all data in the print buffer to be printed out. Then it advances the paper to the first printable line of the next form. The line counter is set to the first line value and the column counter is set to the left margin value. This code cancels the double width printing set by SO code. HT Moves logically the print carriage to the next horizontal tab stop. (IBM/EPSON) ASCII Code HT Hexadecimal Value 09 Decimal Value

  • Compuprint 10300, Commands 103 CODABAR DC4 DC4 ESC! n 22 p EM The Codabar bar code data fields do not have a defined format length and contain data belonging to the character set listed hereafter: 0 1 2 3 4 5 6 7 8 9 - $: /. + A B C D E N T * a b c d e n t (only as START/STOP characters) The printer allows any combination of START/STOP characters. If the first and last characters of the received string do not belong to the START/STOP characters subset, question marks will be printed in place of HRC string, if possible CODE 128 DC4 DC4 ESC ! n 23 p EM The CODE-128 bar code data fields do not have a defined format length and contain data belonging to the stan

  • Compuprint 10300, Commands 40 ESC 5 Cancels italics printing. (EPSON) ASCII Code ESC 5 Hexadecimal Value 1B 35 Decimal Value 27 53 Sets the style attribute of the font to normal (cancels the italic style attribute previously selected with the ESC 4 command). ESC a Sets Letter Quality justification printing. (EPSON) ASCII Code ESC a n Hexadecimal Value 1B 61 n Decimal Value 27 97 n Range 0 < n < 3 Selects from four types of justification, as follows: n Justification 0 Left 1 Centered 2 Right 3 Allows an uniform printing between the

  • Compuprint 10300, Table of Contents ii T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s Table of Contents ......................................................................... ii Commands ................................................................................... 1 General Overview ............................................................................ 1 Command Summary in Alphabetical Order .................................... 2 EPSON/IBM Mode .......................................................................... 8 Print and Line Feed Execution ...........

  • Commands 127 ESC [ p 1 ; p 2 f Horizontal and vertical position absolute (HVP). ASCII Code E E S S C C [ [ p p 1 1 ; ; p p 2 2 f f Hexadecimal Value 1B 5B p 1 3B p 2 66 Decimal Value 27 91 p 1 59 p 2 102 This command causes the current print position to be moved to the vertical (p 1 ) and horizontal (p 2 ) decipoint locations spe

  • Compuprint 10300, Commands 39 ESC _ Sets or cancels overscore printing. (IBM) ASCII Code ESC _ n Hexadecimal Value 1B 5F n Decimal Value 27 95 n Enables or disables the overscore printing. See the following table: n Overscore Printing 1 Enabled (all spaces and characters that follow are overscored) 0 Disabled ESC 4 Sets italics printing mode. (EPSON) ASCII Code ESC 4 Hexadecimal Value 1B 34 Decimal Value 27 52 Sets the style attribute of the font to italic. This command selects italic printing even if the italic character table is not selected.

  • Compuprint 10300, Commands 129 ESC J or VTS Vertical tab setting. ASCII Code ESC J or VTS Hexadecimal Value 1B 4A (7-bit) or 8A (8-bit) Decimal Value 27 74 (7-bit) or 138 (8-bit) This command causes a vertical tab stop to be set to the decipoint value of the current vertical position. ESC [ p 1 ; p n v Sets vertical tab stops at specified positions (Multiple Vertical Tab Set - VTS). ASCII Code ESC [ p 1 ; p n v Hexadecimal Value 1B 5B p 1 3B p n 76 Decimal Value 27 91 p 1 59 p n 118 This command sets up to 12 vertical tab stops at each decipoint position specified by p parameters. The tab stops are measured from the top of the page. When specifying more than on

  • Compuprint 10300, Commands 62 ESC = Defines downloaded characters. (IBM) ASCII Code ESC = n m id p t Hexadecimal Value 1B 3D n m id p t Decimal Value 27 61 n m id p t This sequence allows you to design and then down-line load special characters not present in the character set in use. Whenever you would like to start the DLL setting procedure, proceed as follows: • Copy the character generator in ROM into RAM • Select the DLL generator There are 256 entries of 9 bytes that compose the look up table of a character generator. One entry describes one character as follows: Byte 1, 2 The absolute address of the character definition. Byte 3 :

  • Interfaces 219 I I n n t t e e r r f f a a c c e e T T i i m m i i n n g g Timing and Handshaking depend upon the connection mode. M M o o d d e e C C e e n n t t r r o o n n i i c c s s Our Centronics mode supports the BUSY-WHILE-STROBE busy signal timing and ACK-IN- BUSY as BUSY-ACK relationship. Legend Time interval Min. Max. all times in μs

  • Compuprint 10300, Interfaces 209 P P a a r r a a l l l l e e l l I I n n t t e e r r f f a a c c e e S S i i g g n n a a l l s s Description of the signals in monodirectional link: Signal Name Pin N° Source Description STROBE 1 HOST Clock signal which controls data transmission with its falling edge. ACK 10 PRINTER Negative pulsed signal indicating that the printer has received data and is ready to accept the next set of data. Also sent when the printer is switched from off-line to

  • Compuprint 10300, Commands 106 DC4 DC4 ESC N Selects/loads or parks the fanfold from the Front 2 path. (Compuprint) ASCII Code DC4 DC4 ESC N n Hexadecimal Value 14 14 1B 4E n Decimal Value 20 20 27 78 n Range 0 < n < 1 n Selection 0 Selects and loads the fanfold from the Front 2 path. If the paper is present (cut sheets or fanfold), the printer automatically parks this fanfold that is not requested before loading the new one (after having pressed the PARK key in response to the T EAR IF NECESS/PARK PAPER mess

  • Compuprint 10300, Commands 117 p DEFINITION 14 LQ Courier 15 Draft Italic 16 LQ Gothic Italic 17 Draft Italic 18 LQ Courier Italic 19 Draft 20 Reserved 21 Double Underline Mode 22 Cancel Bold Mode 23 Reserved 24 Cancel Underline Mode (Single & Double) 25 Cancel Expanded Mode 26 Cancel Proportional Mode 60 High speed draft at 10 cpi 61 LQ Courier at 10 cpi 62 63 LQ Prestige at 10 cpi LQ Script at 10 cpi 64 LQ OCR-A at 10 cpi 65 LQ OCR-B at 10 cpi 66 LQ Courier at 10 cpi

  • Compuprint 10300, Interfaces 223 U U S S B B I I n n t t e e r r f f a a c c e e Characteristics • Data Rate: 2.0 Full Speed (12Mbit/s) • Type: B Signals Signal Name Pin Number Description VCC 1 +5 DC D- 2 DATA - D+ 3 DATA + GND 4 GND

  • Commands 109 DC4 DC4 ESC T Selects/loads or parks the fanfold from the Front1 path. (Compuprint) ASCII Code DC4 DC4 ESC T n Hexadecimal Value 14 14 1B 54 n Decimal Value 20 20 27 84 n Range 0 < n < 1 n Selection 0 Selects and loads the fanfold from the Front1 path. If the paper is present (cut sheet/fanfold), the printer automatically parks this fanfold that is n

  • Commands 23 ESC O Disables the skipover perforation. (IBM/EPSON) ASCII Code ESC 0 Hexadecimal Value 1B 4F Decimal Value 27 79 This sequence sets the number of lines of the skipover perforation to the value 0 and so any skip perforation set by ESC N is cancelled. ESC Q Sets the right margin. (EPSON) ASCII Code ESC Q n Hexadecimal Value 1B 51 n Decimal Value 27 81 n Range 1

  • Commands 24 Character Width Horizontal Spacing Range of columns Double Width 5 cpi 1 < n < 67 6 cpi 1 < n < 81 7.5 cpi 1 < n < 101 8.5 cpi 1 < n < 116 10 cpi 1 < n < 135 Normal 10 cpi 1 < n < 135 12 cpi 1 < n < 162 15 cpi 1 < n < 203 17 cpi 1 < n < 232 20 cpi 1 < n &

  • Compuprint 10300, Interfaces 208 O O p p e e r r a a t t i i n n g g P P h h a a s s e e s s The link protocol is mainly based on the following three phases: • Negotiation Phase This phase is activated always by the host, only when in compatibility mode, and defines: - whether a bidirectional link protocol can be established. - the handshaking mode as well as the communications mode to be used. - the device identification, if supported. • Communication Phase This phase is based on well defined handshaking rules which depend upon the selecte

  • Compuprint 10300, Commands 52 C C h h a a r r a a c c t t e e r r S S e e t t ESC [ T Selects a Code page. (IBM/EPSON) ASCII Code ESC [ T 4 0 0 0 Hc Lc Hexadecimal Value 1B 5B 54 04 00 00 00 Hc Lc Decimal Value 27 91 84 4 0 0 0 Hc Lc This sequence allows changing the current code page. If an unavailable code page is specified, this command is ignored. The digits 04 00 00 00 (hexadecimal) and 4 0 0 0 (decimal) are constant. To calculate Hc Lc for a code page that is not shown: If your code page ha

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Panasonic PT-56WX51KR Owner's manual panasonic/pt-56wx51kr-C63.pdf 29 Jul 2023 38 2.52 Mb
2 Electrolux Air-O-Convect 269003 Specification electrolux/air-o-convect-269003-Y35.pdf 11 Aug 2022 4 0.15 Mb
3 Hitachi RAK-25NHA1 Instruction manual hitachi/rak-25nha1-7F5.pdf 18 Jun 2022 26 0.47 Mb
4 Westerbeke 3.5KW SBCG-60Hz Operator's manual westerbeke/3-5kw-sbcg-60hz-849.pdf 21 Feb 2024 59
5 Heat & Glo LifeStyle EXCLAIM-42H-C Owner's manual heat-glo-lifestyle/exclaim-42h-c-51G.pdf 19 Nov 2022 50 1.9 Mb
6 Sony CDX-MP450X - Fm/am Compact Disc Player Operating instructions manual sony/cdx-mp450x-fm-am-compact-disc-player-7ID.pdf 07 Mar 2024 84 1.64 Mb

Similar Resources:

  • Xerox

    Phaser 380

    (5 pages)
    Copyright © 1997 by Tektronix, Inc. All rights reserved. 063-2659-00 Repacking the Color Printerand its Accessories Overview It is very important that you follow the correct repacking procedure before shipping your color printer. Failure to properly repack the printer can cause damage to the printerÕs internal components. You are responsible for an …
  • Epson

    PowerLite 4100

    (7 pages)
    INSTALLATIONHANDBOOKRemote Control Information Epson PowerLite 4100 / 4200W / 43001Using the Remote ControlMake sure batteries are installed. Follow these tips for using the remote control: Point the remote control at the front of the projector or at the screen.Stand within 49 feet (15 meters) of the projector.Controlling the PictureYou can use the remote co …
  • Epson

    Stylus Scan 2000

    (2 pages)
    2361 McGaw AveIrvine, California 92614PHONE: (949) 660-7080FAX: (949) 975-1557 CYANMAGENTAYELLOWBLACK PMS 187VARNISHEPSON®EPSON Stylus Scan 2000PRINT IT. SCAN IT. COPY IT. CREATE IT.EPSON STYLUS SCAN 2000 MAKES IT EASY.What do you get when you combine Epson’srenowned Photo Quality printing technology with award-winning color scanning capabilities in onec …
  • HP

    6100

    (80 pages)
    HP StorageWorks 4x00/6x00/8x00 EnterpriseVirtual Array Updating Product Software Guide(XCS 6.220)AbstractThis guide describes how to upgrade controller software, disk drive firmware, and related EVA managementsoftware on HP StorageWorks 4000/6000/8000 and 4100/6100/8100 Enterprise Virtual Array models.These arrays are referenced as EVA4x00/6x00/8x00 througho …
  • Ricoh

    Martini-C3

    (36 pages)
    Technical Bulletin PAGE: 1/3 Model: Martini-C3 Date: 29-Jan-08 No.: RB246026 Subject: Differences between the MT-C3.5 and MT-C3 Prepared by: S. Watanabe From: 2nd Tech Support Sec. Service Support Dept. Classification: Troubleshooting Mechanical Paper path Part information Electrical Transmit/receive Action required Service manual revision Ret …
  • Lexmark

    20G0482 - T 644tn B/W Laser Printer

    (422 pages)
    Lexmark™ T640, T642, and T6444061-xx0• Table of Contents• Start Diagnostics• Safety and Notices•Trademarks• IndexLexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Revised September 27, 2005 …

Comments, Questions and Opinions: