Manualios.com

Conceptronic 802.11n Wireless Broadband Router C300BRS4A Operation & User’s Manual

  • 802.11n Wireless Broadband Router C300BRS4A Wireless Router
  • mafVcQNeqZLp2
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 76

Conceptronic 802.11n Wireless Broadband Router C300BRS4A Manual Online:

3.05, 1271 votes
Conceptronic 802.11n Wireless Broadband Router C300BRS4A User Manual
Conceptronic 802.11n Wireless Broadband Router C300BRS4A User Guide
Conceptronic 802.11n Wireless Broadband Router C300BRS4A Online Manual

Text of Conceptronic 802.11n Wireless Broadband Router C300BRS4A User Guide:

  • LICENCE AGREEMENT 71 Licensing Information This Conceptronic product C300BRS4A includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see The GNU General Public License for the exact terms and conditions of this license. Specially, the following parts of this product are subject to the GNU GPL: 1. Linux kernel 2.4.2

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 36 Dynamic IP Address A Dynamic IP Address connection configures the Router to automatically obtain its global IP address from a DHCP server on the ISP’s network. The service provider assigns a global IP address from a pool of addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will likely be the same address each time the Router requests an IP address. To configure a Dynamic IP Address connection, perform the steps

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 3 About This Manual This manual provides descriptions of the Conceptronic C300BRS4A 802.11n Wireless Broadband Router, its hardware and software features, and how to set up and use the device on your small office or home network. Before You Start Please read and make sure you understand all the prerequisites for proper installation of your new Wireless Broadband Router. Have all the necessary information and equipment on hand before beginning the installation. A packing list is included at the end of this section. Installation Overview The procedure to install the W

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 14 The Properties window of your Local Area Connection will appear. D. Select the “Internet Protocol (TCP/IP)” and click “Properties”. The Properties window of the Internet Protocol (TCP/IP) will appear. E. Set the properties to “Obtain an IP address automatically” and press “OK” to save the settings. F. Press “OK” in the properties window of the Local Area Connection to save the settings. D D

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 38 PPPoE Follow the instructions below to configure the Router to use a PPPoE for the Internet connection. Make sure you have all the necessary information before you configure the WAN connection. WAN Settings window for PPPoE To set up a PPPoE connection: 1. If not already selected, click the PPPoE radio button at the top of the window. 2. Under the PPPoE Settings heading, type the User Name and Password used for your ADSL account. A typical User Name will be in the form [email protected]. The Password may be assigned to you by your ISP

  • Conceptronic C300BRS4A 802.11n Wireless Broadband Router 23 J. You can change the SSID of the router. The SSID is the name which will be broadcasted through the Wireless part. You can change the channel between channel 1 and 13. If you experience slow connections or break-downs, there can be another accesspoint in your area

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 51 ADVANCED - FIREWALL This window allows the user to allow or deny traffic from passing through the Wireless Broadband Router. Once you have completed your Firewall settings, click Apply to save your changes. Firewall Rules window Configure the filter rules as desired and click the Apply button to create the rule. The newly created rule appears listed in the Firewall Rule List. To configure a new application triggered port forwarding rule, follow these steps: 1. Click on the Enabled option for

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 50 ADVANCED - APPLICATIONS Use this window to run special applications that require multiple connections. To use the Special Applications feature, enter the requested information for your application and click the Apply button. Special Application window To configure a new application triggered port forwarding rule, follow these steps: 1. Click on the Enabled option for Special Application. 2. Type a Name for the rule being created. 3. Type the Trigger Port or port range used for the rule. 4. Select the Trigger Type used for the rule, TCP,

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 43 L2TP Some ISPs may require the user to uplink using the Layer 2 Protocol Tunneling (L2TP) method. L2TP is a VPN protocol that will ensure a direct connection to the server using an authentication process that guarantees the data originated from the claimed sender and was not damaged or altered in transit. Once connected to the VPN tunnel, it seems to the user that the client computer is directly conne

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, LICENCE AGREEMENT 73 either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a wor

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 5 Packing List Open the shipping carton and carefully remove all items. Make sure that you have the items listed here. • 1x Conceptronic C300BRS4A - 802.11n Wireless Broadband Router • 3x Antenna for C300BRS4A • 1x CD-ROM containing this User’s Guide • 1x Straight-through Ethernet cable • 1x Power Adapter, 5V, 2A DC • 1x Quick Installation Guide • 1x Warranty Card

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 64 TOOLS - MISC To perform a standard Ping test for network connectivity as well as a number of miscellaneous network tasks, click the Misc. button in the Tools menu to view the Miscellaneous Configuration window. Ping Test window Ping Test The Ping test functions on the WAN and LAN interfaces. Type the Host Name or IP Address you want to check in the space provided and click the Ping button. Read the Ping test result in the space immediately below Block WAN Ping The Block WAN Ping feature allows the user to block hackers

  • Conceptronic C300BRS4A 802.11n Wireless Broadband Router 24 L. If you want to secure your network with WEP encryption, select “WEP” from the drop-down list. Enter the WEP key in ASCII format (input: A-Z, 0-9). Note: Through the Wizard you can only configure WEP 64Bits. Security – WEP Encryption M. If you want so secure your network

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 4 Requirements for Installation To install and use the Wireless Broadband Router you need a computer equipped with an Ethernet port (such as an Ethernet NIC) and a web browser . WLAN Ethernet Adapter Any computer that uses the Wireless Broadband Router must be able to connect to it through the Wireless Ethernet (WLAN) on the Wireless Broadband Router. This connection is a Wireless Ethernet (WLAN or WiFi) connection and therefore requires that your computer be equipped with a Wireless Ethernet Adapter as well. Many notebook

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 47 Use the Router for DHCP To use the built-in DHCP server, click to select the DHCP Server option if it is not already selected. The IP Address Pool settings can be adjusted. The Starting IP Address is the lowest available IP address. If you change the IP address of the Router this will change automatically to be 1 more that the IP address of the Router. The Ending IP Address is the highest IP address number in the pool. Select the desired Lease Time from the drop

  • Conceptronic C300BRS4A 802.11n Wireless Broadband Router 37 7. The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and reboot the Router, click on the Tools button in the top menu and select the System button in the left menu. In the System Management window, click the Save button under Save Settin

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 67 Menu “Status” Use this window to quickly view basic current information about the LAN, WAN, and wireless interfaces and device information including Firmware Version and MAC address. STATUS - LOG The system log displays chronological event log data. Use the navigation buttons to view or scroll log pages. View Log window You may also save a log by sending it to an admin e-mail address. Complete the information on this window and then click

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 54 ADVANCED – MAC FILTERS MAC filters are used to block or allow various types of packets through the WAN interface. This may be done for security or to improve network efficiency. The rules are configured for individual devices based on MAC address. Filter rules can be set up for source, destination or both. You can set up filter rules and disable the entire set of rules without loosing the rules that have been configured. Configure the MAC filter rules as desired and click the Apply button to

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 61 TOOLS - SCHEDULE Schedule window The Schedule configuration option is used to manage scheduled rules for various firewall and parental control features. Enter the information needed for your schedule setting and press Apply to add it to the Schedule List.

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 11 5. Position antenna for best reception: Adjust the antenna position to see if the signal strength improves. Some adapters or access points allow the user to judge the strength of the signal. Use this method, if available, to test signal strength. WAN Connection Use a LAN Cable to connect the C300BRS4A to your Broadband Gateway (Cable Modem, DSL Modem, Fiber Gateway, etc.) The WAN LED on the front side of the C300BRS4A will turn on. Note: If the WAN LED on the front side does not turn on, make sure that: - The C300BRS4

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 53 ADVANCED – IP FILTERS This window allows the user to allow or deny LAN IP addresses access to the Internet. Rules are based on IP address and TCP/UDP port. Configure the filter rules as desired and click the Apply button to create the rule. The newly created rule appears listed in the IP Filters List at the top of the window. IP Filters window Configure the filter rules as desired and click the Apply button to create the rule. The newly created rule appears listed in t

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 32 The C300BRS4A will activate WPA security on your wireless network and accepts the wireless connection of your Wireless Client with the entered Pin Code. The C300BRS4A will keep the WPS authentication active for 120 seconds. During this process, the WPS LED will blink. If there is no connection in these 120 seconds, the LED will turn off and the WPS authentication process is stopped. Click “Continue” to return to the WPS Wizard screen. Note: If the WPS feature is not used earlier, the wireless network will still be unencrypted. If the authentication of

  • Conceptronic C300BRS4A 802.11n Wireless Broadband Router 59 Menu „Tools” TOOLS - ADMIN If you click on Tools menu and then Admin, the following page will open. Administrator Settings window Enter your new password in the New Password field and then type it again in the Confirm New Password field. The default User

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 70 Radio and Modulation Type For 802.11n: BPSK, QPSK, 16QAM, 64QAM, OFDM For 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM For 802.11b: DQPSK, DBPSK, DSSS, and CCK LEDs Power Status WAN WLAN LAN WPS Temperature Operating: 32ºF to 113ºF (0ºC to 45ºC) Storing: -4ºF to 149ºF (-20ºC to Humidity Operating: 10%~95% (non-condensing) Storing: 5%~95% (non-condensing) Certifications FCC Class B CE Class B C-Tick UL TUV Dimensions L = 199mm W = 118mm H = 35mm W

  • Conceptronic 802.11n Wireless Broadband Router C300BRS4A, Conceptronic C300BRS4A 802.11n Wireless Broadband Router 22 H. When your provider requires a PPTP connection, select the “PPTP” option. Enter the requested information: • Server IP • PPTP Account • PPTP Password • Retype Password When completed, click “Next”. Connection - PPTP I. When your provider requires a L2TP connection, select the “L2TP” option. Enter the requested information: • Server IP • L2TP Account • L2TP Password • Retype Password When completed, click “Next”. Connection – L2TP When the WAN configura

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Casio 3090 Operating instructions manual casio/3090-QX1.pdf 28 Dec 2022 6
2 Novatel Merlin U630 Operation & user’s manual novatel/merlin-u630-453.pdf 11 Sep 2022 44
3 Samsung WB500 Operation & user’s manual samsung/wb500-AMT.pdf 12 Nov 2023 114 5.39 Mb
4 Baumatic P460 Overview baumatic/p460-872.pdf 24 Jun 2022 8 6.05 Mb
5 Zanussi Z30 Instructions for use and care manual zanussi/z30-C63.pdf 15 Mar 2024 24 1.69 Mb
6 boytone B52M Operating instruction boytone/b52m-492.pdf 27 Jul 2023 4

Similar Resources:

  • Cisco

    CISCO887W-GN-A-K9

    (16 pages)
    Data Sheet © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 16 Cisco 880 Series Integrated Services Routers The Cisco® 880 Series Integrated Services Routers combine Internet access, security, voice, and wireless services onto a single, secure device that is simple to use and manage for small …
  • TP-Link

    Nano

    (7 pages)
    How to connect TP-Link Nano Router to WiFi-Router 1. Turn on TP-Link Nano Router by connect USB with Adapter or connect with Notebook 2. Connect TP-Link Nano Router WiFi 3. After connected, Fix IP Address at Notebook is in a same network with TP-Link Nano Router - Default IP Address: 192.168.0.254 - Fix IP Address: 192.168.0.xxx (any IP Address) - …
  • Aztech

    WL950RT4

    (1 pages)
    WL950RT4 ADDENDUM A. For the latest firmware version please visit our website http://www.aztech.com B. If your ADSL Modem router has an IP address of 192.168.1.x, WL950RT4 LAN IP address will automatically change to 10.0.0.2 whenever it detects a conflict behind the ADSL Modem that is using a PPPoE connection C. In Wireless Security, when you select W …
  • Wave wifi

    Rogue Reach WWR

    (2 pages)
    Copyright Wave WIFI Inc., 2017. All rights reserved.AVEWiFiOn the Water and OnlineDid you get all of your accessories?POEInjectorCigarette adapterPower AdapterHOW TO CONFIGURE / OPERATE:1. Plug the end of the ethernet cable into the POE (Power Over Ethernet) injector. 2. Plug the power supply into the POE injector (Both lights on the POE should show solid g …
  • Linksys

    SPA3102

    (10 pages)
    !1!Linksys SPA3102 Thank you for purchasing Linksys SPA 3102. Package Contents: • SPA3102 Body • AC Adapter • Modular Cable • Ethernet Cable • Instruction Manual Disclaimer • Product functions and specifications are subject to change without prior notice. • Quality of call (e.g. choppy line, noise, etc …
  • TRENDnet

    TEW-311BRP

    (13 pages)
    Before You Begin 1. If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable Modem or a DSL Modem with an established Internet account from an Internet Service Provider (ISP). 2. It’s best to use the same computer that is connected to your modem for configuring t …

Comments, Questions and Opinions: