Conexant HCF V.90 Operation & User’s Manual

Text of Conexant HCF V.90 User Guide:

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 7 Chapter 3 Hardware Installation 1. Plug the connector of the USB Modem into the USB port of your PC. 2. Plug one end of telephone cord into the modem’s “LINE” jack, which is shown on the modem’s bracket labeled “LINE”. 3. Insert the other end of the cord into the telephone wall socket. 4. Enable the USB port option in the BIOS setup of your computer.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 14 Chapter 5 Diagnostics 5.1 Diagnostics in Windows 98 1. Move your cursor as following sequence Start / Settings / Control Panel, and double-click on the Modems icon. 2. To test the modem by clicking on the Diagnostics tab. Then select the COM Port where Conexant HCF V.90 Data Fax Voice USB is setting and click More Info… to start the test.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 6 Chapter 2 Specifications 2.1 Specifications Computer Interface USB V1.1 Line Interface RJ-11 for POTS line Data Protocols V.90, K56flex, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and 103 Data Sp eed 56k, 54k, 52k, 50k, 48k, 46k, 44k, 42k, 40k, 38k, 36k, 34k, 33.6k, 31.2k, 28.8k, 26.4k, 24k, 21.6k, 19.2k, 16.8k, 14.4k, 12k, 9600, 7200, 4800, 2400, 1200, 300 Data Compression V.42bis, MNP 5 Error Correction V.42 LAPM, MNP 2,3,4

• Conexant HCF V.90 56K USB Modem User’s Guide 3 Notices to Australian users: The modem card must only be used in a data terminal equipment (DTE) e.g. computer, that has a screw down cover (lid). As unsafe voltages (TNV) exist on the modem card, disconnect the modem card from the tele

• Conexant HCF V.90 56K USB Modem User’s Guide 8 Chapter 4 Software Installation Power on your computer and modem and then start Windows 98/2000. Windows 98/2000 will detect the modem automatically. 4.1 Windows 98 1. When you see the message of V.90 modem with USB interfac

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 16 5.2 Diagnostics in Windows 2000 1. Move your cursor as following sequence Start\Settings\Control Panel. Then double-click on the Phone and Modem Options icon. 2. Click on the Modems tab, then select Conexant HCF V90 Data Fax Voice USB Modem and click Properties.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 22 3. Select Uninstall/Unplug a device, then click Next. 4. Select Uninstall a device and click Next to continue

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 9 3. Select Specify a location, then type in I:\Hcf_Usb\Win98 (I is the letter of the CD-ROM drive) or use Browse to search the location, and click Next to start the search. 4. Windows has found the location of the driver for Conexant USB HCF V.90 Data, Fax, Voice Modem, click Next to start the installation.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 2 FCC Requirements This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED. THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY. The REN is useful to determine the quantity of devices you may

• Conexant HCF V.90 56K USB Modem User’s Guide 15 3. If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK to end this procedure.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 17 3. Click on the Diagnostics tab. To test the modem by clicking Query Modem. 4. If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK to end this procedure.

• Conexant HCF V.90 56K USB Modem User’s Guide 12 3. Select Specify a location, then click Next. 4. Please type I:\Hcf_Usb\Win2K or use Browse… to find the driver directly, then click OK (I is the letter of CD-ROM drive). 5. Windows will found a driver for thi

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 23 5. Select Conexant HCF V90 Data Fax Voice USB Modem, then click Next to continue. 6. Select YES, I want to uninstall this device, then click Next to continue.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 21 6.2 Uninstall in Windows 2000 1. Move your cursor as following sequence Start \ Settings \ Control Panel. Then double-click on the Add/Remove Hardware icon. 2. Click Next to continues.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 4 TABLE OF CONTENTS Chapter 1 Introduction ......................................................5 1.1 Introduction.............................................................................................................................5 1.2 Features ....................................................................................................................................5 1.3 What’s in the Package .............................................................................................................5 Chapter 2 Specific

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 18 Chapter 6 Uninstalling 6.1 Uninstalling in Windows 98 1. Move your cursor as following sequence Start / Settings / Control Panel and Double-click on the Add/Remove programs icon.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 19 2. Select Conexant HCF USB Modem and click on the Add/Remove… button. 3. Click Yes to remove the modem.

• Conexant HCF V.90, Conexant HCF V.90 56K USB Modem User’s Guide 11 4.2 Installing Windows 2000 1. Windows will detect the modem automatic; please insert the driver CD supplied and clicks Next. 2. Select Search for a suitable driver for my device [recommended], then click Next.

Related Products and Documents (Modem):

Comparable Devices:

Similar Resources:

• MaxStream XBP24-PKC-...-U... (50 pages) 355 South 520 West, Suite 180Lindon, UT 84042Phone: (801) 765-9885Fax: (801) [email protected] (live chat suport)XBee-PRO PKG-U™ USB RF ModemXBee-PRO USB RF ModemRF Modem OperationRF Modem ConfigurationAppendicesProduct Manual v1.x82For XBee-PRO RF Modem Part Numbers: XBP24-PKC-...-U...IEEE® 802.15.4 Stand-alone USB RF M …

• Patton electronics 1092 (40 pages) USERMANUALMODEL 1092High Speed, 2-Wire,Sync & Async Short Range Modem SALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.comPart# 07M1092-FDoc# 033011U, Rev. GRevised 1/23/08&(57,),('$Q,62&HUWLILHG&RPSDQ\ …

• Black Box SHM-NPR Plus Series (13 pages) MAY 1997ME739A-F-R2ME739A-M-R2SHM-NPR PlusCUSTOMER SUPPORT INFORMATIONOrder toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018Web site: www.blackbox.com • E-mail: …

• NETGEAR LB1120 (3 pages) Warning: The Netgear LB1120 has 2 external antenna port. For single antenna use, either port can be used. Use both ports for MIMO (Dual Antennas) use. Antenna ports can be fragile. Using excessive force when connecting or disconnecting your adapter cable can damaged the modem's internal antenna. To avoid damaging your modem - Be Gentle.Netgear LB1120 Mo …

• Cisco EPC2203 (10 pages) Data Sheet © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 10 Cisco Model EPC2203 EuroDOCSIS 2.0 Cable Modem with Embedded MTA The Cisco® Model EPC2203 Cable Modem (EPC2203) is a high-speed cable modem with an embedded media terminal adapter (EMTA). The EPC2203 features single line or two RJ- …

• PROLiNK Hurricane 5200C (59 pages) PROLiNK Hurricane 5200C/5201 ADSL2+ Modem / Router User Manual 17/02/2009 Page 1 of 59 Hurricane 5200C/H5201 ADSL2+ Modem / Router User Manual Version 1.0 …

Comments, Questions and Opinions: