Manualios.com

Corega WLUSB2GO Operation & User’s Manual

Corega WLUSB2GO Manual Online:

3.15, 1323 votes
Corega WLUSB2GO User Manual
Corega WLUSB2GO User Guide
Corega WLUSB2GO Online Manual

Text of Corega WLUSB2GO User Guide:

  • Corega WLUSB2GO, 2727 WLUSB2GO Manual 27 8 Secification Compliance Standard IEEE802.11, IEEE802.11b, IEEE802.11g USB Interface USB 2.0 Protocol CSMA/CA Transmission Method DS-SS, OFDM Network Type Infrastructure/802.11 Ad-Hoc Frequency Band/ Channel IEEE802.11b/g: 2.412GHz~2.472GHz Transmission Rate IEEE802.11b: 11/5.5/2/1Mbps IEEE802.11g: 54/48/36/24/18/12/9/6Mbps Transmitter Output Power 17.5dBm@11b, 13.5dBm@11g Coverage Area IEEE802.11b: Indoors 100M, Outdoors 375M(MIMO XR Function Enable Range) IEEE802.11g(@54Mbps): Indoors 30M, Outdoors 40M * Environm

  • Corega WLUSB2GO, WLUSB2GO Manual 16 1616 a. Authentication Type: select [WPA]or [WPA2-PSK] (AP must support the function). b. Encryption: select [TKIP] or [AES](Same as AP) c. If the AP/router has [802.1x Setting] function, click it for advance setting. Please consult your MIS for details. d. Click [OK] to finish setting.

  • Corega WLUSB2GO, WLUSB2GO Manual 1 1. Preface.............................................................................................................2 1.1 Features....................................................................................2 1.2 Packing Content....................................................................2 1.3 Hardware description..........................................................3 1.4 Installation Steps..................................................................3 2. Software Installation................................................

  • Corega WLUSB2GO, 19 WLUSB2GO Manual 19 mend you to select [Infrastructure]. • Transmit power: the amount of power used by a radio trans- ceiver to send the signal out. User can choose power value by sliding the bar. • [RTS Threshold] and [Fragment Threshold] : We recommend you to use the default value 2312. User can adjust threshold numbers by sliding the bars or key in the values directly. 3. Click [OK] and the set AP will appear in the [Profile] tab. 6.2 Profile • [Add]: Click [Add] to add a new profile. • [Delete]: to delete a profile, select one profile name and click [Delete]. • [Edit]:to edit the setting of a profile

  • Corega WLUSB2GO, 1717 WLUSB2GO Manual 17 Chapter 6 will briefly introduce the sections in the setup utility. 6.1 Site Survey 1. The discription of these sections • SSID : Name of AP (or called ESSID). • BSSID : Mac Address of AP • Signal : Signal strength of AP • Channel : AP used channel • Encryption : what encrypted mechanism does AP used • Authentication : What authentication mechanism does AP used. • Network Type : What Network Type does the AP belong to. Generally it is [infrastruture]. 2. Available WLAN list.The icon means currently connecting. 3. [Connected] means connectio

  • Corega WLUSB2GO, www.corega.com.tw www.corega-asia.com 7F., No. 10, Lane 345, YangGuang St. Nei-Hu Chiu, Taipei City 114, Taiwan TEL: +886-2-8751-9164 FAX: +886-2-8751-9174 corega Taiwan Inc. PN: T30-UM8014-00 Rev.B

  • Corega WLUSB2GO, WLUSB2GO Manual 14 14 5.2 Setting WPA WPA encryption type can be divided into WPA-PSK, WPA2-PSK, WPA(or called WPA-EAP), and WPA2(or called WPA2-EAP). All settings should correspond to the settings of the current con- nected wireless network. 《WPA-PSK and WPA2-PSK》 1. Select an AP with [WPA-PSK] or [WPA2-PSK] authentication and press [Connect]. Here we use corega A for example. Thus the following settings must correspond with corega A. 2. Setting the [Authentication and Security] Page:

  • 1313 WLUSB2GO Manual 13 2. Please follow the instructions: a. [Authentication Type]: indicates the authentication type of the AP/Router. Please confirm the setting of the AP/Router. *[Open]: WEP open system is based on request and grant. It is essentially no authentication. *[Shared]: WEP shared key is based on request, challenge, challenge response, grant/deny

  • Corega WLUSB2GO, WLUSB2GO Manual 10 1010 User can use corega Wireless Utility to configure wireless net- work. After finishing configuration, please check if the connec- tion works. Please confirm that user’s computer is in the wireless radio wave range. If the computer is out of the radio range, the setup will not be seccessful. After user installed CG-WLUSB2GO and corega Wireless Utility, CG-WLUSB2GO will automatically link with the AP/Router. If the connection is successful, the following message will appear . 1. Click the icon in the system tray to open the Utility. If there is no such icon, enter [Start]->click[P

  • Corega WLUSB2GO, WLUSB2GO Manual 20 20 6.3 Link Status This tab displays the information of the link status. • Status: Displays the linked AP name and MAC address. When [Disconnect] appears in this box, the connection is failed. • Extra Info: link status and strength. • Channel:Current channel in use. • Link Speed: Show current transmit rate and receive rate. • Throughout: Display transmits and receive throughput value. • Link Quality: Display connection quality based on signal strength and TX/RX packet error rate. •

  • Corega WLUSB2GO, WLUSB2GO Manual 4 2 Software Installation 44 2.1 Hardware Installation Please plug corega WLUSB2GO into the USB port. After you plug it in, please install the software and driver. When the following pages appear, please click [cancel]. <Windows XP> <Windows 2000>

  • Corega WLUSB2GO, WLUSB2GO Manual 12 1212 If your AP/Router have set network security function, your wireless adapter needs to have the same security setting. The details of network security setting are described below. Please open corega Wireless Utility before you start to setup network security: Double click the icon in the system tray to open the Utility page. If there is no wireless icon, please click [start Menu]->se- lect [Programs]->click [CG-WLUSB2GO]->click [corega Wireless Utility], and the wireless icon will appear. 5.1 Setting WEP 1. If your AP has [WEP] authentication(eg:corega ), press [

  • 99 WLUSB2GO Manual 9 3 Setting TCP/IP The following example is for Windows XP OS users: 1. Enter [Start Menu]=>select [Control panel]=>select [Network]. 2. Right-click [Wireless Network](Windows 2000 users please select [Local Area Connection]) icon=>select [properties]。 3. Select [Internet Protocol(TCP/IP)]=>Click [Properties]. 4. Select the [Genera

  • Corega WLUSB2GO, WLUSB2GO Manual 2 22 corega CG-WLUSB2GO 54M Wireless USB Adapter complies with IEEE802.11b/g standards. Its 2.0 USB interface is suitable for any computer with USB port. Its unique bearing cap design makes the cap less impossible to get lost. Moreover, CG-WLUSB2GO provides wide transmission range, high quality and stable trans- mission. These above features make it a great companion for NB & desktop users. 1.1 Features • Complies with IEEE802.11b/g standard. • USB 2.0/1.1 Interface • With wireless coverage up to 375m. Coverage

  • 21 WLUSB2GO Manual 21 6.4 Statistics Statistics page displays the detail counter information. • Transmit Statistics: Statistic of transmitted frames . • Receive Statistics: Statistic of received frames. • [Reset Counters]: Click [Reset Counter] to zero the statistic numbers of transmitting and receiving data. 6.5 Advanced settings The advanced setti

  • Corega WLUSB2GO, WLUSB2GO Manual 18 18 4. Click [Rescan] to rescan and upgrade all the AP’s information in time 5. Click [Connect] to start connecting the selected AP. 6. Save the selected AP’s information to profile. For more details, please refer to 6.1.1. 6.1.1 Add one profile 1. Select one AP in the SSID column, eg: corega0205=>Click [Add to Profile] and the below page will appear. 2. Setting items in the [configuration] tab: • Profile Name: Enter the connected AP profile, eg: PROF1. • SSID: Click the drop-down menu and select one AP. You can also enter the AP manually. • PSM: Whe

  • Corega WLUSB2GO, 2525 WLUSB2GO Manual 25 Q2.How to keep the network connection quality well? A: (1) Move the AP nearer. (2) Remove barriers between AP and laptop. (3) Do not place AP on a metal shelf. (4) Please keep away from microwave, 2.4GHz cordless phone, and medical equipment. (5) Change the direction of your laptop or AP. Q3. What should I do when I can not find other computers in [My Network Places]? A: To solve this problem, please open [My Network Places] and make sure all computers have the same settings in the net- work name. ■ Windows XP (1)Right click on [My Computer]=>select [properties] (2) Select [Network Identification]=>select [properties], type the sam

  • Corega WLUSB2GO, 1111 WLUSB2GO Manual 11 3. To make connection, select one AP/SSID (eg:corega) and click [Conncet]. When the connection works, [Connected] will appear in the left button of this tab and the icon appears in front of the linked AP. When the connection failed,[Disconnected] will appear. If the AP has set up the encryption, please setup the the same keys on CG-WLUSB2GO (refer to chapter 5) before you click [OK].

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sensormatic VM16 Plus System operator's manual sensormatic/vm16-plus-EUL.pdf 24 Jan 2023 112 2.38 Mb
2 NAD C 372 Service manual nad/c-372-25G.pdf 28 Aug 2023 21
3 ATIKA HS 560-45 - Operating manual atika/hs-560-45-CML.pdf 08 Nov 2022 72 3.21 Mb
4 3M 740B30 Technical data 3m/740b30-741.pdf 31 Jan 2024 2 0.63 Mb
5 ATEN VM0808 Operation & user’s manual aten/vm0808-QM1.pdf 11 Jul 2023 47 2.44 Mb
6 Eiki LC-NB1UW Specifications eiki/lc-nb1uw-ICT.pdf 15 Feb 2023 1 0.02 Mb

Similar Resources:

  • NETGEAR

    Orbi RBR50

    (164 pages)
    User ManualOrbi WiFi SystemModels:Orbi Router Model RBR50Orbi Satellite Model RBS50Orbi Router Model RBR40Orbi Satellite Model RBS40Orbi Router Model RBR20Orbi Satellite Model RBS20Orbi Wall-Plug Satellite Model RBW30NETGEAR, Inc.350 E. Plumeria DriveJanuary 2021San Jose, CA 95134, USA202-11675-14 …
  • Belkin

    F5U239 - SATA II ExpressCard Storage Controller Serial

    (12 pages)
    Belkin Tech Support US: 800-223-5546, ext. 2263310-898-1100, ext. 2263Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546Belkin Corporation501 West Walnut StreetLos Angeles, CA 90220-5221, USA310-898-1100310-898-1111 faxBelkin Ltd.Express Business Park, Shipton WayRushden, NN10 6GL, United Kingdom+44 (0) 1933 35 2000+44 (0) 1933 31 …
  • Sprint

    595U

    (178 pages)
    Sprint Mobile BroadbandUSB Modemby Sierra WirelessAirCard®595Uwww.sprint.com© 2007 Sprint Nextel. All rights reserved. SPRINT and other trademarks are trademarks of Sprint Nextel. …
  • ZyXEL Communications

    NPS-520

    (137 pages)
    NPS-520MFP Print Server Quick Start GuideVersion 1.00 Edition 21/2007 Copyright © 2007. All rights reserved.Table of ContentsENGLISH 1 DEUTSCH 19 ESPAÑOL 39 FRANÇAIS 59 ITALIANO 79 РУССКИЙ 99 SVENSKA 119 …
  • Thecus

    N8800

    (6 pages)
    Quick Installation GuideGuide d’Installation RapideKurzanleitungGuida rapida all’installazione Guía de instalación rápidaThecus N8800IP Storage ServerThecus Technology CorporationV1.0 …
  • Cisco

    4000

    (24 pages)
    1Doc. No.Copyright © 1996Cisco Systems, Inc.All rights reserved.Upgrading Cisco 4500, Cisco 4500-M,Cisco 4700, and Cisco 4700-M Memory78-1469-04Product Numbers:This publication describes the upgrade and replacement of main, shared, Flash, and ROM monitormemory in the Cisco 4500, Cisco 4500-M, Cisco 4700, and Cisco 4700-M. Read this entirepublication before …

Comments, Questions and Opinions: