Manualios.com

Nokia 8830 S Owner's Manual

Nokia 8830 S Manual Online:

4.75, 1255 votes
Nokia 8830 S User Manual
Nokia 8830 S User Guide
Nokia 8830 S Online Manual

Text of Nokia 8830 S User Guide:

  • Nokia 8830 S, GB 23 Manual Search When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider. Transponder frequency: Specify the frequency in GHz. If you enter the wrong figure(s), erase with the button. Polarization: Select Horizontal, Vertical, Circular left or Circular right. Symbol rate (MSym/s): Enter with the numeric buttons. If you enter the

  • Nokia 8830 S, GB 24 MAIN MENU Receiver Upgrade In order to keep the DMP up-to-date, it will be possible to download new versions of the system software via satellite. New software may include new or improved features for existing menus. Enter this menu to check for new software. If new software is available you will get information in the menu on how to proceed. If you download new software from ”Nokia Internet pages”, you transfer the software from the computer to the DMP via the se- rial port. IMPORTANT! Updating via satellite may take a while. The front display will indicate the percent left to download. NEVER turn off the DMP, never use the remote control o

  • Nokia 8830 S, GB 20 Select Channels From this menu you add and remove the channels in your Favour- ite Lists. You use the “All TV” or “All Radio” list as basis to se- lect the channels from. A channel is added or removed by pressing the OK button. The square to the right on a line will be empty for removed channels, and will contain an “x” for added channels. • Move to desired channel(s) with , double arrows or the nu- meric buttons, and add/remove them by pressing OK. • When you are ready, confirm the selections and leave the menu by pressing BACK. MAI

  • GB 32 Main Menu 1 TV Channels 2 Radio Channels 3 Edit Channels 4 Guide 5 System Configuration 6 User Preferences 7 System Information 8 Conditional Access System Configuration 1 Channel Search 2 TV Settings 3 Time Adjustment 4 Receiver Upgrade 5 Reinstall Parental Control 1 Receiver Lock Off 2 Age rating Control On 3 Age Limit 15 4 Change Access Code U

  • Nokia 8830 S, GB 5 To switch the DMP in and out of standby mode. TV To switch between TV or Radio (in viewing mode). To turn the sound off/on (mute). - + To adjust the volume of digital programmes. The DMP’s maximum level is controlled by the TV’s present volume setting. 0 - 9 To change channel and to select individual menu options. Note: If 0 is entered as the first digit, the Freeze (on/off) func- tionality is activated . Info. To display short and extended information (if transmit- ted) about current and next programmes. BACK To go back one level in the menus normally without storing settings. EXIT To return to viewing mode from a menu without storing settings (in menu mode). MENU

  • Nokia 8830 S, GB 29 Problem The display on the front panel does not light up/is not lit. No sound or picture, but the front panel shows the time or - - : - -. No sound or picture. No sound or picture on horizontal modulated transponder. Bad picture/blocking error. There is no menu on the screen af- ter you switched on the DMP for the first time. There is interference on your digital satellite channels, an existing ter- restrial channel or video signal. You made a video recording of a dig- ital satellite channel and whole o

  • Nokia 8830 S, GB 12 General Information Once you have correctly connected the DMP, you also have to perform a “First Time Installation.” During this procedure, helpful information is displayed at the bot- tom of the menus. Please note! The OK button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be entered in a menu. First, perform all necessary settings on the differen

  • Nokia 8830 S, GB 25 MAIN MENU Parental Control To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234. The following settings can be altered from this menu. Receiver lock If you select “On,” you will have to enter the access code every time you start the DMP from standby. Age Rating Control If you want everybody to have access to all available types of pro- grammes, select “Off.” If you select “On,” you may block programmes unsuitable for children. Select an age limit between 4 and 18 years on the line that appears. However, you should be aware that not all Service Providers have

  • Nokia 8830 S, GB 6 to put the DMP in and out of standby mode to move up/down in the menus and to change channels. Display shows channel number, error messages, remote con- trol commands and time in standby mode Front Panel Slot for the Smartcard from the Service Provider FRONT AND REAR PANEL AUDIO L/R stereo audio output for TV or VIDEO output for TV * LNB cable also feeds the LNB with a supply voltage of 13/18 V (V/H polarisa- tion) and a 0/22 kHz signal (bandswitch). Max LNB current 400 mA. S-VIDEO output for TV Mains power socket 95-250 V AC 50-60 Hz ANTENNA * Satellite dish in- put (F-connector) Rear Panel SERIAL serial RS 232 output TV AERIAL input for the terrest

  • GB 4 GENERAL OPERATION OF THE DMP Throughout this manual you will notice that the everyday opera- tion of your DMP is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your DMP, guiding you through installation, channel selec- tion, viewing and many other functions. All functions can be carried out using the b

  • Nokia 8830 S, GB 21 Rearrange Channels From here you can arrange the sequence for the channels within your favourite lists. • With , mark the channel you want to move to a new posi- tion within the list. • Press again and the right side of the marked channel will change to . • Move the channel to the desired position with and press OK. It is also possible to first mark several channels, and then move them all simultaneously. • For each channel, press the button to add it to the set of marked channels. • When a number of channels are marked this way and you want to move the whole set of chan

  • GB 30 PROBLEM SOLVING FRONT PANEL DISPLAY Problem The remote control is not working. You see the on-screen message. Viewing card error. You have forgotten your secret PIN code. Possible causes Battery exhausted. Remote control is incorrectly aimed. The DMP is in standby mode. The DMP can’t recognise or detect your Smartcard. What to do Change the batteries (both). Aim the remote c

  • Nokia 8830 S, GB 7 How to insert a Smartcard (Nagravision) • Insert your Smartcard fully into the slot on the front panel of the DMP. The gold chip should face downwards and in- wards. PIN Code The Smartcard is loaded with a 4-digit code, also called a PIN code (Personal Identification Number). The code is essential in order to access future services offered by the Service Provider. ABOUT THE SMARTCARD Note 1! The gold chip of the smartcard should face downwards and inwards The DMP box has access to scrambled TV/Radio channels based on t

  • Nokia 8830 S, GB 13 Channel Search The Channel Search procedure can be performed in different ways. • If there are predefined channels, you can make an Automatic Search. • If no predefined channel is available you can make a Manual Search. FIRST TIME INSTALLATION Manual Search When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider. Transponder frequency: Specify the frequency in GHz. If you enter the wrong figure(s), erase with the button. Polarization: Select

  • Nokia 8830 S, GB 17 VIEWING MODE Video Recording Please note, that during the recording of a programme, every- thing shown on the screen will be registered! For example, if you call up a menu from the DMP on the screen, the menu will be recorded! When recording digital channels from the DMP and the Video recorder is connected with a RF cable: you must give the DMP an own position number on the video. (The same way as you probably already have given other channels their own positions.) The TEXT button • Pressing the TEXT button wi

  • Nokia 8830 S, GB 28 MHz The prefix mega means million, and Hertz means cycles per second. MPEG Moving Picture Experts Group. Body established by the International Standards Organisation to provide the ba- sis for a picture coding and compression system. Network A number of digital channels transmitted from one source. Grouped under separate headings in the chan- nel list. Parental control A feature that allows parents to ”lock” programmes that they consider unsuitable for children. A ”locked” chan- nel or programme can only be ”unlocked” with the spe- cial parental access code. Pare

  • GB 11 This procedure is necessary only if your DMP is connected to the TV with an RF lead. To tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use Audio/Video leads in your connection. • Plug in your DMP. Tuning your TV to the DMP • Select a channel number on

  • Nokia 8830 S, GB 14 VIEWING MODE General Information The following describes the basic functions of your DMP while watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information. Please note, that during the Channel Search procedure, the DMP may download a large number of channels. This may include channels from various Service Providers, also those to which you do not have ac

  • Nokia 8830 S, GB 10 Connecting a HiFi System • Connect an RCA/Cinch stereo cable from the AUDIO L R sock- ets on the DMP to the LINE, AUX, SPARE or EXTRA input sockets on your HiFi system. Note: To avoid interference you must use a screened au- dio cable. If your TV has a S-Video socket (S-Video cable is not in- cluded) • Connect a S-Video cable from the S-Video socket on the DMP to the S-Video input socket on your TV. • Connect an RF cable from the RF output socket on the VCR to the TV aerial input socket on the TV. • Connect an RF cable from the TV/VCR output socket on the DMP to the RF input socket on the VCR. • Conn

  • Nokia 8830 S, GB 18 MAIN MENU General Information Many of the functions of the DMP are available from the Main Menu. • Press MENU to open it. TV and Radio Channels Please refer to “List of TV and Radio channels” on page 16. Edit Channels From these menus you can create and edit channel lists. You can, among other things, create favourite lists; add, delete, rename and arrange the order of the channels within the lists. The “All TV” list can contain hundreds of channels. By creating your own favourite lists you can make channel handling a bit more convenient. • Press BACK to save changes.

  • Nokia 8830 S, GB 9 Connecting to the TV • Connect the Audio/Video cable between the TV and the AUDIO/VIDEO L R sockets on the DMP. • Connect an RF cable (not included) from the TV AERIAL input socket on the TV to the TV/VCR out- put of the DMP. • Connect the TV aerial directly to the TV AERIAL in- put socket on the DMP. There are many different types of TV/VCR and other equipment that you can connect to the DMP. In this manual you will see some of the most common ways to connect your equipment. If you use RF leads you will have to tune your TV and VCR

  • Nokia 8830 S, GB 15 VIEWING MODE The “i” (Information) Button The DMP has the ability to display information about programmes currently being broadcast as well as those being broadcast next. This procedure is the same for both TV and Radio mode. By pressing the “i” button while watching TV you will get a spe- cial Programme Information Banner. Select channel with or the numeric buttons. The “i” symbol is coloured blue when displaying information about the current channel, and red when information for another channel is shown. In this view, you can select to get information about the current and next programme by using the

  • Nokia 8830 S, GB 3 DIGITAL MULTIMEDIA PROCESSOR (DMP) 8830 S Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their owners. Nokia Multimedia Terminals operates a policy of continuous development. Therefore we reserve the right to make changes and improvements to any of the products described in this manual without any prior notice. The EMC Directive 89/336/EEC is applied to this product. Copyright © 2000. Nokia Multimedia Terminals. All rights reserved. Contents General Operation of the DMP 4 For your Safety 4 Remote Contro

  • Nokia 8830 S, GB 22 MAIN MENU System Configuration You will be asked to enter your access code before you can en- ter this menu. The code is preset to 1234 from the factory. (The code can be changed from the Parental Control menu. Re- fer to page 25.) If you want to customize the system to suit you better, you can specify some settings from the submenus in the “System Con- figuration” menu. Please note that many of these functions are the same as in the “First Time Installation.” Channel Search The Channel Search procedure can be performed in different ways. • If there are predefined channels, you can make an Automa

  • Nokia 8830 S, GB 31 Transmission Standards DVB, MPEG 2 LNB / Tuner input Input connector 1x F-type (Antenna) RF input frequency 920 to 2150 MHz RF input power level -25 to -60 dBm Supply voltage 13 V ± 0,5 V /18 V ± 0,7 V Max. current 400 mA, overload protected Control voltage 22 kHz RF impedance 75 Ω RF modulator Input/output connector 2x F-type (TV AERIAL/TV/VCR) Modulator frequency 61.25, 67.25 MHz, channel 3 & 4 Bypass frequency 54 to 806 MHz Output signal NTSC Output channel 3 to 4 Preset channel 3 Design Loop through output VIDEO Connector 1 x RCA Composite video output AUDIO R L Connector 2 x RCA (

  • GB 16 List of TV and Radio Channels At the channel search procedure, two Channel lists are created. One list named “All TV” containing all channels, and another named “Free TV” containing only free channels. In the “All TV” list scrambled channels are marked with a picture of a Smartcard (if this information is transmitted in the signal) and locked cha

Related Products and Documents (Processor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Fender Passport 300 Pro Owner's manual fender/passport-300-pro-511.pdf 16 Jun 2023 36 6.49 Mb
2 Omegon 90/1000 EQ-2 Instruction manual omegon/901000-eq-2-BK1.pdf 07 Oct 2022 12
3 Billion BiPAC 8501 Operation & user’s manual billion/bipac-8501-JE1.pdf 17 Jun 2022 134 2.82 Mb
4 John Deere 4930 - FILTER OVERVIEW WITH SERVICE INTERVALS Overview john-deere/4930-filter-overview-with-service-intervals-CT4.pdf 08 Dec 2023 1
5 Dell 1200MP Owner's manual dell/1200mp-J65.pdf 15 Nov 2023 904
6 LG P999 Brochure lg/p999-DTI.pdf 02 Jun 2023 2

Similar Resources:

  • HP

    D7171A - NetServer - LPr

    (3 pages)
    HP NetServer LXr ProwithAutoRAIDOracle Parallel Server Configuration Guide13 July 1998IntroductionThis document defines the supported HP NetServer LXr Pro configuration for Oracle Parallel Server. Thisconfiguration minimizes single points of failure, provides maximum availability, and has been certified byHewlett-Packard and Oracle. This guide is prescrip …
  • Texas Instruments

    SM320F2812-HT Data

    (153 pages)
    SM320F2812-HTDigital Signal ProcessorData ManualPRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of the TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.Literature Number: SGUS062BJune 2009–Revised June 2011 …
  • HP

    RDX REMOVABLE DL380

    (48 pages)
    SCSI ModelSCSI ModelSCSI ModelSCSI ModelSAS ModelSAS ModelSAS ModelSAS Model 1.Quick removal access panel2.Intel Xeon Processor (High performance models include twoprocessors)3.Smart Array 6i Array Controller (Ultra320) with optional128MB Battery Backed Write Cache (BBWC) or Smart ArrayP600/256 BBWC Controller. (All High performance modelsinclude BBWC)4.Thre …
  • TYAN

    M4881

    (29 pages)
    http://www.TYAN.com 1 QUAD CPU Card ///M4881 Revision 1.00 Copyright © TYAN Computer Corporation, 2005-2006. All rights reserved. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are …
  • Precision Power

    PSC-221

    (15 pages)
    CONTENTS(click on a topic to view)Congratulations FunctionsFeatures and Specifications Maximizing PerformanceInstallation Maximizing PerformanceInstallation TroubleshootingWiring System Diagram 1Wiring Block DiagramFunctions WarrantyPSC 221 Phase Shifter OWNERS MANUAL POWER CLASSTM …
  • Intel

    BX80532PG3200D

    (74 pages)
    Document Number: 322875-001EN Intel® Pentium® Processor on 45-nm ProcessDatasheetFor Platforms Based on Mobile Intel® 4 Series Express Chipset FamilyOctober 2009 …

Comments, Questions and Opinions: