Manualios.com

Creative DSI V.92 Getting Started

Creative DSI V.92 Manual Online:

3.85, 2947 votes
Creative DSI V.92 User Manual
Creative DSI V.92 User Guide
Creative DSI V.92 Online Manual

Text of Creative DSI V.92 User Guide:

  • Creative DSI V.92, 3-3 Te s t i n g t h e Installation in Windows 2000 1. Click Start -> Settings -> Control Panel. 2. Double-click the Phone and Modems icon. The Phone and Modem Options dialog box in Figure 3-3 appears. 3. Click the Modems tab, then click the Properties button. The Creative Modem Blaster V.92 DE5671 Properties dialog box appears. 4. Click the Diagnostics tab. 5. Click the Query Modem button (Figure 3-4) to display the response status of your modem. If your modem is not responding, it may be due to a conflict between the modem and another peripheral device. To resolve the conflict, you must change the settings on your modem (see “Resolving Har

  • Creative DSI V.92, 2-4 In Windows XP/2000 1. Upon connecting your modem to the computer’s USB port, a Found New Hardware Wizard dialog box similar to Figure 2-2 pops up. Click the Next button to proceed. Notes on Telephone Lines To ensure that the modem works properly, note that: ❑ Your modem cannot be used on “party lines”, nor can it be used on toll or coin-operated lines. Contact your local telephone company for help if you are not sure about the suitability of your telephone line. ❑ This modem is intended for use on an analog telephone line, also called a POTS (Plain Old Telephone Service) line. This modem cannot be connected directl

  • Creative DSI V.92, 3-5 Te s t i n g t h e Installation in Windows XP 1. Click Start -> Control Panel. 2. Click the Phone and Modem Options icon. The dialog box in Figure 3-7 appears. 3. Click the Modems tab. 4. Click Creative Modem Blaster V.92 DE5671, then click the Properties button. The Creative Modem Blaster V.92 DE5671 Properties dialog box in Figure 3-8 appears. 5. Click the Diagnostics tab. 6. Click the Query Modem button (Figure 3-8) to display the response status of your modem. If your modem is not resp

  • 2-2 Installing your Modem Do not connect your modem to your computer’s USB port before installing the drivers from the Installation CD. Step 1: Installing drivers and software 1. Insert the Installation CD into your CD-ROM drive. 2. Click the names of the drivers and applications you want to install on your computer. 3. Follow the instructions on the screen to complete the instal

  • Creative DSI V.92, Uninstalling Modem Drivers 4-5 Uninstalling the Modem in Windows XP 1. Click Start -> Control Panel. 2. Click the Add or Remove Programs icon. The Add or Remove Programs dialog box in Figure 4-4 appears. 3. Click the Change or Remove Programs tab. 4. Click Creative Modem Blaster V.92 DE5671. 5. Click the Change/Remove button. 6. When Windows prompts you to remove the modem, click the Yes button. 7. Click the OK button. 8. Turn off your computer and disconnect the modem from your USB port. Figure 4-4 : Add or Remove Programs dialog box.

  • Creative DSI V.92, Troubleshooting B-2 Troubleshooting This appendix provides tips and solutions for resolving some of the problems you might encounter with Creative Modem Blaster V.92 DE5671 either during installation or normal use. Problems with Your Modem The modem fails to accept commands to dial or answer a call. There may be an improper telephone line connection. Check the following: ❑ Make sure the telephone cable is attached to the Telephone Line Jack. ❑ Check that all devices are turned on. ❑ Try connecting the modem to another USB port or or powered hub, or directly to the PC if i

  • Creative DSI V.92, Contents Introduction Before You Begin .....................................................................................vii Recording Model and Serial Numbers ................................................ vii Checking System Requirements ....................................................... vii Product Registration........................................................................ vii Technical Support and Warranty Information .................................... viii Document Conventions............................................................................viii 1 About your Creative Modem Blaster V.92 USB About

  • Creative DSI V.92, 5 Modem Features Plug and Play ............................................................................... 5-2 Faxes .......................................................................................... 5-2 Internet Access ............................................................................ 5-2 Video Conferencing ....................................................................... 5-2 V.44 Data Compression ................................................................. 5-3 QuickConnect ............................................................................... 5-3 PCM Upstream..........................................

  • Creative DSI V.92, 2-3 Step 3: Connecting your modem to the computer 1. Connect your modem's integrated cable to an available USB port on your computer. You can do this while your computer is turned on. Depending on the version of Windows you are using, proceed to the appropriate step: In Windows 98 SE/Me ❑ Upon connecting your modem to the computer’s USB port, you should see Windows detecting your modem and automatically installing the drivers. Figure 2-1 Connecting the modem to the computer and telephone line USB connector USB port Telepho

  • Creative DSI V.92, Modem Features 5-2 Modem Features Besides transferring data and accessing online information, your Creative Modem Blaster has the following features: Plug and Play This feature allows you to install your modem easily, as it is automatically configured. Faxes Use your modem to send and receive fax documents. This feature also allows you to configure the modem to serve as a fax-on-demand system by using the software provided. Internet Access Internet Support with the latest drivers and V.92 protocols available for download to ensure f

  • Creative DSI V.92, 3-4 Te s t i n g t h e Installation in Windows ME 1. Click Start -> Settings -> Control Panel. 2. Double-click the Modems icon. The Modems Properties dialog box in Figure 3-5 appears. 3. Click the Diagnostics tab. 4. Click the COM port that has been assigned to your modem. 5. Click the More Info button to display the response status of your modem (Figure 3-6). If your modem is not responding, it may be due to a conflict between the modem and another peripheral device. To resolve the conflict, you must change the settings on your modem (see “Resolving Hardware Conflicts” on page B-4). Figure 3-5 : Modem Properties

  • vii Introduction Before You Begin This section contains information you should know before using this manual. Read the information carefully before proceeding further. Recording Model and Serial Numbers Your modem has a model number and a serial number. Write down these numbers after removing the modem from its packaging. You will need to provide these numbers when c

  • Creative DSI V.92, Modem Features 5-3 Answering Machine Modem Blaster functions as an answering machine with multiple mail boxes. Remote users can leave messages in your mail box, and you can play back these messages at any time. Modem Blaster even pages you to notify you of new messages! V.44 Data Compression V.44 Compression reduces the time it takes to load web pages, run web searches, and receive e-mail with new compression designed specifically for the Internet. QuickConnect Quick Connect cuts dial-up time to as little as half, by learning how to connect to your ISP the first time you ca

  • Creative DSI V.92, Modem Features 5-6 Making a call If you are connected to the Internet and wish to make a call, follow the instructions below: 1. Right-click the Creative icon on the Windows taskbar (Figure 5-3). 2. Select the Make a Phone Call function. 3. Pick up your phone and dial as you would normally. A dialog box similar to Figure 5-4 appears, indicating how much time you have to complete your call. 4. When you complete your call, hang up the telephone and then click the Resume My Internet Connection button. Note: The length of hold time available is determined by your ISP. If your call is longer t

  • Creative DSI V.92, General Specifications A-2 General Specifications This appendix lists your modem’s general specifications. Data Features ❑ Integrated data, fax, and voice mail modem ❑ 56,000/54,667/53,333/52,000/50,667/49,333/48,000/46,667/45,333/42,667/41,333/ 40,000/38,667/37,333/36,000/34,667/33,600/31,200/28,800/26,400/24,000/21,600/ 19,200/16,800/14,400/ 12,000/9,600/7,200/4,800/2,400/1,200/300 bps data speeds ❑ Compatibility with the following data modem standards: • V. 9 2 , V. 9 0 , V. 3 4 , V. 3 2 b i s , V. 3 2 , V. 23, V.22bis, V.22, and V.21;

  • Creative DSI V.92, Modem Features 5-4 Modem-On-Hold Your Modem Blaster V.92 USB offers complete Modem-On-Hold support so you can pause your Internet connection while you answer incoming phone calls and while you make outgoing phone calls. Since Modem-On-Hold also requires support from your Internet Service Provider (ISP), you may need to check with them to ensure that this feature is supported in the area. Incoming Modem-On-Hold works with Call Waiting service from your phone company to pause your Internet connection while you answer calls. With the Caller ID service, Incoming Modem-On-Hold also identifies incoming callers. Outgoing Modem-On-Hold works with the Three-

  • Creative DSI V.92, Troubleshooting B-4 Resolving Hardware Conflicts Hardware conflicts may occur when two or more peripheral devices are set to use the same I/O address, IRQ line or DMA channel. To resolve conflicts in Windows 98 SE, Windows 2000, Windows ME or Windows XP, use Device Manager to change the resource settings of the conflicting peripheral. Resolving Conflicts in Windows 98 SE/ ME To run Device Manager: 1. Click Start -> Settings -> Control Panel. 2. Click the System icon. The System Properties dialog box appears. 3. Click the Device Manager tab. 4. Locate t

More Instructions:

DOWNLOAD

Related Products and Documents (Modem):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Bush BCR35DABRED Instruction manual bush/bcr35dabred-1Z4.pdf 21 Apr 2023 19
2 Scion 2006 tC Pocket reference manual scion/2006-tc-RVU.pdf 30 Aug 2022 11 0.77 Mb
3 Chamberlain DH Wiring diagram chamberlain/dh-CQH.pdf 25 Oct 2023 4
4 Aroma NutriWare NRC-690SD-1SG Instruction manual aroma/nutriware-nrc-690sd-1sg-ES7.pdf 11 May 2023 14 5.85 Mb
5 JVC GR-AX280 Instructions manual jvc/gr-ax280-Z49.pdf 24 Nov 2023 60
6 Magnavox TP3669C Owner's manual magnavox/tp3669c-3M4.pdf 14 Oct 2023 40

Similar Resources:

  • Patton electronics

    1052

    (20 pages)
    USER MANUAL MODEL 1052 iDSL Modem with RS-232 Interface SALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007 Part# 07M1052-BDoc# 058061UBRevised 5/24/02 An ISO-9001CertifiedCompany …
  • Comtrend Corporation

    NexusLink 3120

    (12 pages)
    For General Information, Visit Our Website at www.nexicom.netTo Contact Us for Technical Support and General Inquiries:On the Phone: 705-775-6394 or 1-888-639-4266Monday–Friday, 8 am–10 pm, Saturday 8 am–5 pm, Sunday 9 am–5 pm.By Email: [email protected] our Knowledge Base: https://kb.nexicom.netComtrend NexusLink 3120 High Speed DSL …
  • Ercogener

    GenPro 300e

    (8 pages)
    Noce d’installaon GenPro 300e Référence : EG_GenPro300e_1103_IS_004 Révision : 004 (id 3541) Date : 30/07/2018 Auteur : YST Déclaraon UE de conformité ercogener déclare que l'équipement radioélectrique du type GenPro 300e est conforme à la direcve 2014/53/UE. (RED). Le texte complet de la déclaraon UE de conformité …
  • TRENDnet

    TFM-PCIV92A - DATA SHEETS

    (2 pages)
    TFM-PCIV92A(B1) Microsoft Windows 7 Installation Minimum System Requirements  Computer with an available PCI slot Version 2.2  CPU: 1GHz or above  Memory: 1GB RAM or above  Hard Driver Space: 4MB or above Note: 1. DO NOT install the TFM-PCIV92A in the computer until instructed to do so. 2. You will need to uncompress the drivers afte …
  • SBC

    Macintosh Efficient Networks 5260

    (28 pages)
    Part Number: 5250GENQSG Version 1.0 ©2001 SBC Advanced Solutions, Inc. All rights reserved. READ ME FIRST *DSL Equipment Installation Guide: Efficient Networks® 5260 *Digital Subscriber Line® …
  • Patton electronics

    1089/C

    (17 pages)
    USERMANUALMODEL 1089 C and D HDSL Modem with V.35 or X.21 InterfacePart# 07M1089-UMDoc# 03208U2-001Rev. CRevised 10/24/06SALES OFFICE(301)975-1000TECHNICAL SUPPORT(301)975-1007http://www.patton.comCERTIFIEDCERTIFIEDAn ISO-9001CertifiedCompany …

Comments, Questions and Opinions: