Manualios.com

Crestron TPS-IMPC Operation Manual

Crestron TPS-IMPC Manual Online:

3.25, 2996 votes
Crestron TPS-IMPC User Manual
Crestron TPS-IMPC User Guide
Crestron TPS-IMPC Online Manual

Text of Crestron TPS-IMPC User Guide:

  • Crestron TPS-IMPC, This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module Contents Interface Module: TPS-IMPC 1 Introduction......................................................................................1 Features & Functions.............................................................1 Specifications.........................................................................1 Physical Description ..............................................................2 Industry Compliance..............................................................7 Setup........................

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module Interface Module: TPS-IMPC Introduction Features & Functions The TPS-IMPC is an interface module designed for, and included with the Crestron  TPS-3000, TPS-5000, and TPS-6000 tilt touchpanels. The sleek design of the touchpanel base left little room for all the connectors that define the touchpanel's versatility. Furthermore, since the panel is not a stationary user interface, it is impractical to have an excessive amount of cable connections directly to the touchpanel. As a result, it

  • Crestron TPS-IMPC, Interface Module Crestron TPS-IMPC Physical Description The TPS-IMPC, shown in the following diagram, is supplied with the TPS-3000, TPS-5000, and TPS-6000 tilt touchpanels. The module is housed in a black enclosure with a silk-screened top panel. An AC adapter port, network connector, and video input connectors are located on one side of the unit. The opposite side provides a video input signal selector switch, audio input connectors, microphone output connectors, and audio/network/video connections to the touchpanel. The TPS-IMPC also has mounting feet to secure th

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module NTSC/PAL VIDEO The NTSC/PAL video input consists of three connectors; two BNC connectors for unbalanced video signals and one 6-pin mini-connector for twisted pair wiring of balanced video signals. The video signal is connected to these ports and requires a TPS-3000 or installation of the TPS-VID-1 or TPS-VID-2 video card in a TPS-5000 or TPS-6000 touchpanel to display video. Consult the latest revision of the TPS-3000 Operations Guide (Doc. 6076) or TPS-VID-1/2 Operations & Installation Guide (Doc. 6059) for details. Use either the two BNC connectors or the six-pin connector for twisted pair wiring when connecting a video source. NOTE: B

  • Crestron TPS-IMPC, Interface Module Crestron TPS-IMPC CAUTION: If power is provided to the TPS-IMPC from the +24VDC on a Cresnet connector or the PW-2420RU, power must not be applied to the power input on the touchpanel base. NOTE: When power is supplied through this connector, Crestron recommends disconnecting the +24 VDC on the Cresnet connector (if it is connected). NOTE: Use care in wiring installations to avoid applying 24 VDC power to Cresnet wiring from multiple sources. NET/VIDEO (To Panel) VIDEO NET/ 1 This 10-pin RJ-45 connection mates with the TPS-3000, TP

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module CAUTION: The 10-pin RJ-45 net/video connector cable supplied by Crestron is a custom cable and is the only one that should be used. The end of the cable has a metal shield that is required to protect the equipment. Using non-Crestron cables will result in damage to the product. AUDIO (To Panel) AUDIO 1 This 8-pin RJ-45 mates with the TPS-3000, TPS-5000, or TPS-6000 touchpanel. The 8-pin audio cable assembly is supplied. Even though the 10-pin net/video cable may fit into the port, do not use it. This port provides audio input to the touchpanel and microphone output from the touchpanel

  • Crestron TPS-IMPC, Interface Module Crestron TPS-IMPC AUDIO INPUT Pinouts PIN DESCRIPTION S Shield R + Right Positive R - Right Negative L + Left Positive L- Left Negative S Shield MIC OUT The port mates with a three-pin connector (supplied) and produces line level differential output. Description of the pinouts is shown in the following table. MIC OUT Pinouts PIN DESCRIPTION + Positive - Negative S Shield BAL/COAX While not a port, these DIP switches are used to select which video connections (balanced or unbalanced) to use when receiving video signals. When used wi

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module Industry Compliance As of the date of manufacture, the TPS-IMPC has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling (N11785). Setup Network Wiring CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so could cause equipment damage or void the Crestron warranty. CAUTION: Possible equipment damage if miswired. NOTE: When installing network wiring, r

  • Crestron TPS-IMPC, Interface Module Crestron TPS-IMPC must be taken into consideration. If network units are to be daisy-chained on the run, the power factor of each network unit to be daisy-chained must be added together to determine the power factor of the entire chain. The length of the run in feet and the power factor of the run should be used in the following resistance equation to calculate the value on the right side of the equation. Resistance Equation R = Resistance (refer to table below). L = Length of run

  • Crestron TPS-IMPC Interface Module TPS-5000 or TPS-6000 touchpanel and a video window object resides on a page within the uploaded Crestron VisionTools ® Pro-e (VT Pro-e) project. NOTE: When connecting the net/video cable from the interface module to the touchpanel, exceeding a cable length of 30 feet will significantly degrade the video signal. To maintain h

  • Crestron TPS-IMPC, Interface Module Crestron TPS-IMPC Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-IMPC Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Touchpanel is not receiving power. Confirm that power is supplied via the power pack or the Cresnet connector (not both). Touchpanel does not function. Touchpanel is not communicating to the network. Use Viewport (via SIMPL Windows or VT Pro-e) to poll the network. Verify network connection t

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module TPS-IMPC Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Incorrect video format selection. Select the proper video input configuration in the touchpanel configuration SETUP MENU. Incorrect VT Pro-e project file loaded. Make sure that video window object resides in project, re- compile, and reload. Video window on touchpanel has no display. Damaged connector pins. Inspect connector pins. If bent, carefully re-straighten. If broken, contact Crestron customer service. Video colors are wrong and/or

  • Interface Module Crestron TPS-IMPC Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the TPS-IMPC, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the C

  • Crestron TPS-IMPC, Crestron TPS-IMPC Interface Module Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns mu

  • Crestron TPS-IMPC, Crestron Electronics, Inc. Operations Guide - DOC. 6162 15 Volvo Drive Rockleigh, NJ 07647 06.03 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

More Instructions:

DOWNLOAD

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony Xperia GX SO-04D Instruction manual sony/xperia-gx-so-04d-672.pdf 11 Oct 2022 269 9.96 Mb
2 Paramount Fitness MDX-R3 Owner's manual and installation manual paramount-fitness/mdx-r3-69W.pdf 06 Sep 2023 12
3 Ampeg SVT-2 PRO Owner's manual ampeg/svt-2-pro-971.pdf 21 Oct 2022 8 0.72 Mb
4 Gordon 94878 Assembly and operation instructions manual gordon/94878-OMO.pdf 25 Nov 2022 20 1.17 Mb
5 Troy-Bild SV471 Operator's manual troy-bild/sv471-57R.pdf 04 Dec 2023 95
6 Tissot T001.520.47.281.00 Operation & user’s manual tissot/t001-520-47-281-00-CRF.pdf 10 Oct 2022 11 3.8 Mb

Similar Resources:

  • Yamaha

    DB-SREV1

    (4 pages)
    DB-SREV1 DSP Expansion BoardforThank you for choosing the Yamaha DB-SREV1 DSP Expansion Board.Ask an authorized Yamaha service engineer to install the board. Do not install the board yourself.Nous vous remercions d’avoir choisi la carte d’extension DB-SREV1 DSP.Demandez à un spécialiste agréé d’un centre de maintenance Yamaha d’installer la carte …
  • HP

    NC364T

    (14 pages)
    The HP NC364T PCI Express Quad-Port Gigabit Server Adapter features four 10/100/1000T Gigabit Ethernet ports on a single card,saving valuable server I/O slots for other purposes. The four ports provide the highest density available for ProLiant servers in a singleadapter. The NC364T is ideal for virtualization, security, server consolidation, network segment …
  • Panasonic

    MA22D39

    (4 pages)
    Schottky Barrier Diodes (SBD) Publication date: February 2008 SKH00141CED 1 This product complies with the RoHS Directive (EU 2002/95/EC).MA22D39Silicon epitaxial planar typeFor high speed switching circuits Features Optimum for forward current (Effective value) IF(RMS) = 1.57 A rectification Reverse voltage VR = 40 V is guaranteed Absolute M …
  • Fortinet

    FortiGate FortiGate-5001FA2

    (39 pages)
    www.fortinet.comFAN TRAY FAN TRAYFAN TRAY13119753124681012145140PWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCPWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCPWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCPWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCPWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCPWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCMANAGEMENTSYSTEME1ZRELED MODE1514131211109876543210E2OKCLKINTEXTFLTH …
  • Cisco

    7300-6T3

    (54 pages)
    Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 526-4100Clear Channel 6-Port T3 (DS3) Line Card Installation and ConfigurationProduct Numbers: 7300-6T3Platform Supported: Cisco 7304Text Part Number: OL-3449-02 …
  • HP

    EliteBook 2730p

    (7 pages)
    Introduction......................................................................................................................................... 2 EFI applications and tools ..................................................................................................................... 2 Applications accessible during startup .................... …

Comments, Questions and Opinions: