Manualios.com

Crestron TPMC-10-DSW Operating And Installation Manual

  • TPMC-10-DSW Docking Station
  • maNGuz5tW36tc
  • Operating And Installation Manual
  • PDF / Adobe Acrobat Reader
  • 20

Crestron TPMC-10-DSW Manual Online:

4.35, 2758 votes
Crestron TPMC-10-DSW User Manual
Crestron TPMC-10-DSW User Guide
Crestron TPMC-10-DSW Online Manual

Text of Crestron TPMC-10-DSW User Guide:

  • Crestron TPMC-10-DSW, This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.

  • Crestron TPMC-10-DSW, Crestron TPMC-10-DSW Docking Assembly for TPMC-10 Contents Docking Assembly for TPMC-10: TPMC-10-DSW 1 Introduction ...............................................................................................................................1 Functions and Features................................................................................................ 1 Specifications ..............................................................................................................2 Physical Description.................................................................

  • Crestron TPMC-10-DSW Docking Assembly for TPMC-10 Docking Assembly for TPMC-10: TPMC-10-DSW Docking Assembly for TPMC-10: TPMC-10-DSW Introduction Introduction Functions and Features The TPMC-10-DSW is a wall-mounted docking station for the Crestron ® TPMC-10 Isys i/O ™ WiFi Touchpanel. The TPMC-10-DSW, recessed in the wall, turns the TPMC-10 into a fully-fun

  • Docking Assembly for TPMC-10 Crestron TPMC-10-DSW Specifications The table below provides a summary of specifications for the TPMC-10-DSW. Specifications of the TPMC-10-DSW SPECIFICATION DETAILS Cresnet ® Power Usage 75 Watts (3.1 Amps @ 24 VDC) 1 Output to touchpanel 57 Watts (3 Amps @ 19 VDC) Default Network ID 22 2-Series Control System Update Files

  • Crestron TPMC-10-DSW, Crestron TPMC-10-DSW Docking Assembly for TPMC-10 Front View Components Enter Button Numeric Keypad Buttons Green LED Locking Arms Magnets Cradle and Interface Connector Controls The only user controls are located on the front panel. Numeric Keypad Buttons Five backlighted buttons, labeled 1-2, 3-4, 5-6, 7-8, and 9-0, are used to input a numeric code to open the docking station. These buttons can also be programmed via SIMPL Windows to perform other functions. Enter Button One backlighted button used to accept entry code in coded mode or to open the docking station immediately in uncoded mode. Indicators The unit’s i

  • Crestron TPMC-10-DSW, Docking Assembly for TPMC-10 Crestron TPMC-10-DSW Industry Compliance As of the date of manufacture, the units have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Setup Network Wiring C

  • Crestron TPMC-10-DSW, Crestron TPMC-10-DSW Docking Assembly for TPMC-10 NOTE: When daisy-chaining Cresnet units, strip the ends of the wires carefully to avoid nicking the conductors. Twist together the ends of the wires that share a pin on the network connector, and tin the twisted connection. Apply solder only to the ends of the twisted wires. Avoid tinning too far up the wires or the end becomes brittle. Insert the tinned connection into the Cresnet connector and tighten the retaining screw. Repeat the procedure for the other three conductors. NOTE: For larger networks (i.e., greater than 28 network devices), it

  • Crestron TPMC-10-DSW, Docking Assembly for TPMC-10 Crestron TPMC-10-DSW Installation To install the TPMC-10-DSW, complete the following procedure in the order provided. Tools required are a #2 Phillips screwdriver and a 9/64-inch Allen wrench. NOTE: The TPMC-1-DSW is designed for mounting in a vertical configuration only. Do not mount in a lectern or desktop configuration. 1. Prepare a cutout in the wall, centered between two studs, located on 16-inch centers. The hole should be 13 inches wide, and 11 inches high. Refer to the following drawing. (Depending on the accuracy of the stud spacing, it may be desirable to prep

  • Crestron TPMC-10-DSW, Crestron TPMC-10-DSW Docking Assembly for TPMC-10 4. With Cresnet power off, feed the Cresnet cable through the grommet in the bottom of the unit, and then through the captive tie-wrap on the rear plate of the unit. Attach the supplied terminal block connector to the Cresnet cable and plug into the port on the PC board. Make sure the cable is not pulling on the PC board connector, and tighten the tie-wrap. (Refer to the following illustration.) Routing and Attaching the Cresnet Cable PC Board Tie-Wrap Grommet Terminal Block Connector 5. As shown in the following illustration, position

  • Crestron TPMC-10-DSW, Docking Assembly for TPMC-10 Crestron TPMC-10-DSW 7. Secure the bezel into position using the four supplied 6-32x1/4” black pan-head screws B using a #2 Phillips screwdriver. 8. Hold the cover plate in position and use an Allen wrench to adjust the plate alignment screw shown in the previous illustration so the plate is flush with the adjacent surface of the bezel. (Turn clockwise to move it in; counterclockwise to move it out.) 9. When the position is satisfactory, attach the cover plate using the screws removed in step 3. 10. The latch adjust

  • Crestron TPMC-10-DSW Docking Assembly for TPMC-10 • Crestron Database version 17.3.3 or later. • Crestron Toolbox version 1.01.06 or later • (Optional) Crestron SystemBuilder version 2.0.6 or later. Requires SIMPL Windows and Crestron Database 17.3.3. Programming with the Crestron SystemBuilder The easiest method of p rogramming, but does not

  • Crestron TPMC-10-DSW, Docking Assembly for TPMC-10 Crestron TPMC-10-DSW Expanded MC2E System Tree C2Net-Device Slot in Configuration Manager In Configuration Manager, drag the TPMC-10-DSW from the Cresnet I/O Control & Other Modules subfolder of the Touchpanels folder in the Device Library and drop it on the Cresnet Units symbol in System Views. The MC2E system tree displays the TPMC-10-DSW in C2Net-Device, Slot 1, with a default Net ID of 22, as shown in the following graphic. C2Net Device, Slot 1 Setting

  • Crestron TPMC-10-DSW, Crestron TPMC-10-DSW Docking Assembly for TPMC-10 C2ENET-1-Device Slot in Configuration Manager To incorporate a TPMC-10 into the system, the control system requires either a plug- in Ethernet card, or a built-in Ethernet port. The MC2E control system has a built-in Ethernet port in Slot 5 that can accept the TPMC-10 two-way wireless Ethernet touchpanel. The slot allows Cresnet communication between the touchpanel and the control system. Drag the TPMC-10 from the Touchpanels | Touchpanels (Ethernet) folder of the Device Library and drop it on the C2ENET-1 in Slot 5. The MC2E displays the TPMC-10 at its def

  • Crestron TPMC-10-DSW, Docking Assembly for TPMC-10 Crestron TPMC-10-DSW Operation Normal operation consists of docking the touchpanel (performed by hand) into the TPMC-10-DSW or undocking electronically via the control system or via the docking station keypad, and then removing by hand. Docking the TPMC-10 To dock the TPMC-10, refer to the procedure below. 1. Remove the adhesive backing from the supplied metal strips and attach them to the rear of the TPMC-10, adjacent to the unit’s rubber feet, as shown in the following illustration (dimensions are approximate). When the TPMC-10 is docked, the magnets on the cover plate will engage the metal strips and hold the touchpanel securely in posi

  • Crestron TPMC-10-DSW, Crestron TPMC-10-DSW Docking Assembly for TPMC-10 3. Press the upper edge of touchpanel inward to dock the touchpanel. Note that the docking station is a pneumatically damped assembly. When the touchpanel is in position, the upper latching assembly rotates down to secure the touchpanel in place. Undocking the TPMC-10 During normal operation, the user can undock the touchpanel via the controls on the front panel. The unit is supplied with the default pass code 1 2 3 4. Enter the code via the numeric keypad bu

  • Crestron TPMC-10-DSW, Docking Assembly for TPMC-10 Crestron TPMC-10-DSW Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPMC-10-DSW Troubleshooting TROUBLE POSSIBLE CAUSE CORRECTIVE ACTION Incorrect numeric code was entered. Enter the correct numeric code. TPMC-10-DSW does not unlatch touchpanel. Cresnet power is not connected. If the green LED is off, locate cause and restore power. Touchpanel battery does not charge. The touchpanel is not properly docked. Verify that the green LED is on if the touchpanel is docked. Make

  • Crestron TPMC-10-DSW Docking Assembly for TPMC-10 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying

  • Crestron TPMC-10-DSW, Crestron Electronics, Inc. Operations Guide - DOC. 6400 15 Volvo Drive Rockleigh, NJ 07647 (2013787) Tel: 888.CRESTRON 10.05 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

More Instructions:

DOWNLOAD

Related Products and Documents (Docking Station):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Casio UP-360 Service manual casio/up-360-YUS.pdf 30 Sep 2022 41
2 Spirit XE195 Owner's manual spirit/xe195-273.pdf 17 Sep 2023 28
3 AKG CS3 Instruction manual akg/cs3-977.pdf 14 Mar 2024 44
4 VideoLabs DocCam Pro VC Installation & user manual videolabs/doccam-pro-vc-411.pdf 08 Oct 2023 16
5 Frigidaire Oven Wiring diagram frigidaire/oven-A9A.pdf 23 Oct 2023 1 0.06 Mb
6 Digitus DN-60021-1 Operation & user’s manual digitus/dn-60021-1-L4H.pdf 17 Jun 2023 5

Similar Resources:

  • Razer

    EDGE

    (26 pages)
    1 | razer™ Designed with gaming in mind, we focused on developing the most powerful tablet in the world that runs all PC games and applications. It’s not just a tablet, but a PC and a console. The Razer Edge is the world’s first tablet designed for PC gamers. The latest Intel® Core™ i5/i7 processor and NVIDIA® GeForce® graphics are powering …
  • iLive

    IS819B

    (20 pages)
    1.-.1USER'S GUIDEV:1457-0312-09IS819BWireless Music System with Dock for iPodI CONTENTSWARNINGSANDPRECAUTIONS 2PRODUCT INFORMATION 4FEATURES 4IN THEBOX4POWERING THE UNIT & REMOTE 5ACPOWERCORD 5REMOTE BATTERIES 5POWERING THE SPEAKERS 5ACPOWERCORD· 5BATTERY POWER 5BATTERY BACKUP 5WIRELESS CONNECTIVITY . 6PAIRING SPEAKERS WITH THE UNIT 6LINK INDICATOR …
  • Philips

    AJT3300

    (2 pages)
    SOURCEEN After Bluetooth connection, you can control your incoming phone call with this product.Button FunctionPress to answer an incoming call.During a call, press to end the current call.Press and hold for 2 seconds to reject an incoming call.Note: Music play pauses when there is an incoming call.CS Po připojení Bluetooth můžete pomocí tohoto výrobku …
  • MSI

    Gen 2

    (4 pages)
    1 MSI NB FAE Team︱Revision: 1.0︱Date: 2021/12/1 Quick Guide - Docking Station Gen 2 Firmware Update This guide shows how to update firmware of MSI docking station gen 2 : Before starting…  Please disable any antivirus software in Windows Security.  Connect the Docking Station Gen 2 to MSI notebook.  Connect the Docking to an e …
  • Enabling Devices

    Adapted 6 Switch iHome

    (2 pages)
    For Technical Support: Call our Technical Service Department Monday through Friday, 9 a.m. to 5 p.m. (EST) 1-800-TEC-TOYS or 1-800-832-8697 [email protected] Adapted 6-Switch iHome #597 USER’S GUIDE 50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 …
  • RocketFish

    RF-HV3

    (2 pages)
    LINE INQUICK SETUP GUIDEConvertible Speaker DockRF-HV3Features • Certied connector for iPods and iPhones • Charges iPods and iPhones when docked • Digital volume control • 3.5 mm line-in jack for use of other music playersPackage contents • Convertible speaker dock • Dock adapters for iPods and iPhones (7): iPod Classic (80G/120 …

Comments, Questions and Opinions: