Manualios.com

Crestron TPS-VID-1 Operations & Installation Manual

Crestron TPS-VID-1 Manual Online:

3, 659 votes
Crestron TPS-VID-1 User Manual
Crestron TPS-VID-1 User Guide
Crestron TPS-VID-1 Online Manual

Text of Crestron TPS-VID-1 User Guide:

  • Crestron TPS-VID-1, This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2002 Crestron Electronics, Inc.

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel Contents Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 1 Introduction 1 Features and Functions 1 Specifications 2 Physical Description 4 Industry Compliance 5 Installation and Hookup 5 Setup 12 Configuring the Touchpanel 12 VT Pro-e Setup 15 SIMPL Windows Setup 16 Problem Solving 17 Troubleshooting 17 Further Inquiries 18 Future Updates 18 Return and Warranty Policies 19 Merchandise Returns / Repair Service 19 CRESTRON Limited Warranty 19 Operations & Installation Guide - DOC. 60

  • Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 Introduction Features and Functions The TPS-VID-1 and TPS-VID-2 video cards are designed for Crestron’s Isys™ TPS-4500, TPS-5000, and TPS-6000 tilt touchpanels. Each card contains a video digitizer that allows video signals to be displayed on a touchpanel. The TPS-VID-1

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 The TPS-VID-1 can automatically detect composite or S-video. The TPS-VID-2 uses the “C” input for a second composite video source (on the TPS-VID-2, Composite/S-Video can be auto-detected only when input signal 2 is not used). Video signals to the touchpanel are supplied through a Crestron TPS interface module (IMC) that is provided with the touchpanel or an optional TPS wall-mounted interface module (IMW). When using the TPS-VID-2 for receiving two video sources, the “Comp/Y” connection will be used for Video Source 1 while the chroma “C”

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel Specifications of the TPS-VID-1/VID-2 SPECIFICATION DETAILS Power Requirements TPS-VID-1: 7 Watts (0.29 Amp @ 24 VDC) TPS-VID-2: 12 Watts (0.50 Amp @ 24 VDC) Control System Update Files 1,2,3 2-Series Control System Version C2-2004.CUZ or later CEN/CN-TVAV Version 5.12.63v.UPZ or later CNMSX-AV/PRO Version 5.12.63x.UPZ or later CNRACKX/-DP Version 5.12.63w.UPZ or later ST-CP Version 4.02.4S.UPZ or later Isys™ Touchpanel Firmware 4 Version 1.018 or later VT Pro-e Programming Software 1 Version 3.0.0.8 or later Video Types NTSC o

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 NOTE: Crestron software and any files on the Crestron website are for Authorized Crestron dealers only. New users may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description The TPS-VID-1 and TPS-VID-2 card, shown in the following diagrams below, is a printed circuit board (PCB) that is designed for installation into a dedicated expansion slot on the touchpanel motherboard. The card contains a 60-pin connector that attaches directly to the motherboard and is secured with four mounting screws (supplie

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel TPS-VID-1/VID-2 Top View 3.35 in (8.51 cm) 5.93 in (15.06 cm) 2.41 in (6.12 cm) NOTE: The TPS-VID-1 circuit board is slightly less populated than the TPS-VID-2 Industry Compliance As of the date of manufacture, the card has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling (N11785). NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 procedure while wearing a grounding strap that is properly grounded and on a grounded workstation to avoid damaging the TPS-VID card and/or the touchpanel. CAUTION: To prevent stripping of screw heads, threads, or mounting holes, DO NOT overtighten screws. Tighten only to the specification listed in the individual step(s). NOTE: If the angle of the touchscreen needs to be adjusted, consult the latest revision of the appropriate operations guide for instructions of how to use the touchpanel position lock buttons. The latest versions of operations guides

  • Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel TPS-VID-1/VID-2 Installation (1 of 6) – Remove Touchpanel Base Cover Screws TPS-6000 ZA***** SEE MANUAL FCC ID: EROTPS-6000 C000000 USE POWER PACK PW-2420RU ELECTRONICS, INC Rockleigh, NJ 07647 U.S.A. ELECTRONICS, INC Rockleigh, NJ 07647 U.S.A. CLEAN PANEL WIT H SOFT CLOTH O NLY READ INSTRUCTIO

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 8. Align the pins on the touchpanel interface connector of the TPS-VID-1 or TPS-VID-2 with the touchpanel motherboard connector. DO NOT force pins into connector. Press the TPS- VID-1/VID-2 until the pins are fully seated. Make sure that the screw holes of the card align with the mounting posts on the motherboard. Refer to the following diagram for a detailed view. TPS-VID-1/VID-2 Installation (3 of 6) – Install TPS-VID-1/VID-2 9. Install the four mounting screws (supplied), tighten to finger-tight then, using a Phillips screwdriver, tighte

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel TPS-VID-1/VID-2 Installation (4 of 6) – Install TPS-VID-1/VID-2 Mounting Screws 10. Position the touchpanel base cover onto the base by tilting the front of the cover downward under the touchpanel pivot and lowering the base cover. 11. Hold the touchpanel base cover in place and position the touchpanel face-down onto a padded surface to prevent scratching of the screen. 12. Re-install the eight base cover screws to finger-tight then, using a Phillips screwdriver, tighten each screw an additional 1/8-tur

  • Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 TPS-VID-1/VID-2 Installation (5 of 6) – Re-install Touchpanel Base Cover Screws TPS-6000 ZA***** SEE MANUAL FCC ID: ER OTPS-6000 C000000 USE POW ER PACK PW-2420RU ELECTRONICS, INC Rockleigh, NJ 07647 U.S.A. ELECTRONICS, INC Rockleigh, NJ 07647 U.S.A. CLEAN PANEL WITH SOFT CLOTH ONLY READ I NSTRUCTIO N

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel the cable assembly to the NET/VIDEO port of the appropriate interface module (TPS-IMC is shown) or to the TPSBLOCK-10 interface (refer to the latest version of the TPSBLOCK-10 Installation Guide, Doc. 5979 for functional and physical description). NOTE: When connecting the Net/Video cable from the interface module to the touchpanel, exceeding a cable length of 30 feet will significantly degrade the video signal. To maintain high-quality video, DO NOT daisy-chain cables or Crestron TPSBLOCK-10 cables longer than 30-

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 NOTE: When using the TPS-VID-2 for receiving two composite video sources, the “Comp/Y” connection will be used for Video Source 1 while the chroma (C) connection will be used for Video Source 2. NOTE: A variety of video wiring combinations can be used. For example, Signal 1 can be connected to the BNC connector while Signal 2 can use the twisted pair connector. Do not apply different video signals to the BNC and twisted pair connector for the same input (i.e. one signal on BNC “Y” input and a different source signal on the twisted pair “Y” input). NOTE: When connecting cables to a TPS-IMC-BV, se

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel SETUP MENU (TPS-VID-1 shown) NOTE: If the TPS-VID-1 is installed, a single “Video” button will be displayed. If the TPS-VID-2 is installed, buttons labeled “Video 1” and “Video 2” will be displayed instead of the single “Video” button. NOTE: If the video card is not properly installed, the “Video” button(s) will not be displayed. 2. Select the Video button from the SETUP MENU to set preferences for the video source. If a TPS-VID-2 is installed, buttons labeled “Video 1” and “Video 2” will be displayed instead of the single Video button. Select the appropriate “Video” button to set pr

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 Video Setup 3. The touchpanel can be configured to auto-detect the signal type (S-Video or Composite) coming in to the touchpanel or can be set to a specific signal type (S-Video or Composite). Select the appropriate signal type. NOTE: When configuring the TPS-VID-2, the Video 1 signal type can be automatically detected as long as one signal is sent to the touchpanel. NOTE: A solid blue screen is displayed in the video window if a video signal is not detected or is very weak. Verify that the video source is

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel Video Setup Details (continued) VIDEO SCREEN BUTTONS DESCRIPTION Saturation Use to increase or decrease image saturation. Hue Use to shift the color balance. Fast Motion / Still Video (toggle) The Fast Motion setting eliminates motion artifacts caused by the difference between the first and second halves of a video field and softens the image. The Still Video setting yields a much sharper image, however, motion artifacts may occur if fast moving objects are displayed. Soft / Sharp (toggle) Used to soften images that are t

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 Selecting the Video Source NOTE: If the card is not present, the Crestron Viewport displays a warning message during the upload and the video window remains blank. For further information regarding video window objects, refer to the VT Pro-e help file. SIMPL Windows Setup The touchpanel does not require special programming in SIMPL Windows to display video. 16 • Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 Operations & Installation Guide - DOC. 6059

  • Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-VID-1/VID-2 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Improper v

  • Crestron TPS-VID-1, Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2 TPS-VID-1/VID-2 Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Video colors are wrong and/or moving Touchpanel is set to Auto-Detect or S-Video when two composite signals plugged into TPS-IMC. Switch to “Composite” video. Further Inquiries If after reviewing this Operations & Installations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron�

  • Crestron TPS-VID-1, Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2. Products may be returned for credit, exchange, or service with a CRESTR

  • Crestron Electronics, Inc. Operations & Installation Guide - DOC. 6059 15 Volvo Drive Rockleigh, NJ 07647 12.02 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Related Products and Documents (Video Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Vector SPORTSPOT 1,000,000 CANDLE POWER SPOTLIGHT Owner's manual & warranty information vector/sportspot-1-000-000-candle-power-spotlight-94R.pdf 19 Sep 2023 4 0.15 Mb
2 ClearCube M2010S Operation & user’s manual clearcube/m2010s-F7S.pdf 06 Jul 2023 142 10.9 Mb
3 Electrolux WA GL4 E 201 Operation & user’s manual electrolux/wa-gl4-e-201-W5K.pdf 14 May 2023 52
4 AWS BCM-100 Operation & user’s manual aws/bcm-100-8G7.pdf 14 Apr 2023 8
5 Directed Audio 250d Owner's manual directed-audio/250d-2P2.pdf 15 Oct 2022 12
6 Garmin rino 120 Operation & user’s manual garmin/rino-120-769.pdf 17 Mar 2023 71 1.33 Mb

Similar Resources:

  • ATI Technologies

    RADEON 9500 SERIES

    (37 pages)
    RADEON™ 9500 SERIESUser’s GuideP/N 137-40410-20Copyright © 2002, ATI Technologies Inc. All rights reserved.ATI and all ATI product and product feature names are trademarks and/or registered trademarks of ATI Technologies Inc. All other company and/or product names are trademarks and/or registered trademarks of their respective owners. Features, performa …
  • MSI

    N8400GS series

    (2 pages)
    6 5Insist on the bestMICRO-STAR INT'L CO., LTD.TEL. 886-2-32345599http://www.msi.com6 5Insist on the bestMICRO-STAR INT'L CO., LTD.TEL. 886-2-32345599http://www.msi.comN8400GS series G52-V2062X1September 2009Using MSI Live Update OnlineInstalling MSI Live UpdateMSI Live Update offers you with brand-new update service experience, which can significa …
  • ATI Technologies

    V7300 - Firegl 512MB Pcie Bulk

    (2 pages)
    ModelModelModelModelATI FireGL V5600 512 MB PCIe Graphics CardGT346AAIntroductionIntroductionIntroductionIntroductionUnified Shader Architecture, enabling real-time realistic rendering of more complex datasetsPerformance & FeaturesPerformance & FeaturesPerformance & FeaturesPerformance & FeaturesUnified Shader Architecture, enabling real- …
  • Gigabyte

    GV-N220D2-1GE

    (34 pages)
    GV-N220D2-1GE/GV-N220OC-1GI/GV-N220OC-512I/GV-N220D2-1GI/GV-N220D2-1GI Rev2.0/GV-N220TC-1GINVIDIA® GeForceTM GT 220 Graphics AcceleratorUser's ManualRev. 20212MM-N220OGI-202RCopyright© 2010 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any form wit …
  • Nvidia

    Video-PX9000 series

    (36 pages)
    Video-PX9000 series / Video-PX498 series/ Video-498PCI series NVIDIA GeForce™ 9000 series User’s Manual Version 6.00 Copyright © 2009 Jaton Corporation, USA …
  • phase 5

    Maccelerate!750TA

    (20 pages)
    1ANWENDERHANDBUCH2. Auflage Dezember 1998Copyright 1998phase 5 digital productsIn der Au 27 61440 Oberursel Konzeptionelles Design: Gerald Carda, Wolf DietrichHardware-Design: Gerald CardaPlatinen-Layout: Gerald Carda, Thomas KnäbelDokumentation: Michael SistigBest boy on set: Thomas KnäbelBest girl on set: BritaSatz & Layout: Michael SistigWa renzeich …

Comments, Questions and Opinions: