Manualios.com

D-Link DVG-2001S Manual 

D-Link DVG-2001S Manual Online:

3.1, 879 votes
D-Link DVG-2001S User Manual
D-Link DVG-2001S User Guide
D-Link DVG-2001S Online Manual

Text of D-Link DVG-2001S User Guide:

  • D-Link DVG-2001S, DVG-2001S User’s Manual 34 D-Link Systems, Inc. Select Use the following DNS server address . Enter the LAN IP address of the your router or gateway. The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses such as 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network. You have completed the assignment of a static IP address in Windows XP/2000! How do I assign a Static IP Addr

  • D-Link DVG-2001S, DVG-2001S User’s Manual 7 D-Link Systems, Inc. Network Overview Network Overview Once you’ve completed your DVG-2001S installation, your network may appear similar to the diagram below. Note that an electrical power outage or a broadband provider outage will prevent operation of the VoIP phone, including for emergency purposes (e.g. calling 911).

  • DVG-2001S User’s Manual 17 D-Link Systems, Inc. Using the Configuration Utility Tools > Time Enter the domain name or IP address of a NTP server (leave blank for the default time server). NTP Server: Select your time zone from the drop-down menu. Time Zone: Click Apply to update the firmware. Apply:

  • D-Link DVG-2001S, DVG-2001S User’s Manual 18 D-Link Systems, Inc. Using the Configuration Utility Tools > Reboot This screen allows you to reboot the VoIP Terminal Adapter. To reboot the DVG-2001, click the Reboot button. Note: This simply restarts the DVG-2001. It does not change any of your settings.

  • DVG-2001S User’s Manual 2 D-Link Systems, Inc. Package Contents .................................................................................................... 3 System Requirements .............................................................................................. 3 Introduction ...................................................................

  • D-Link DVG-2001S, DVG-2001S User’s Manual 15 D-Link Systems, Inc. Using the Configuration Utility Tools > System Click Reset to Factory Default to restore the default settings. Reset to Factory Default: Click the Backup button to save your current settings to a file. Click the Browse button to locate a saved configuration file. Once you locate the file, click Upload to overwrite the current settings with the settings saved to the file. The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by the DVG-2001S can be uploaded into the unit. To restore a system settings file, click on Browse to search the local

  • D-Link DVG-2001S, DVG-2001S User’s Manual 9 D-Link Systems, Inc. Click on Run Wizard. Click Next. Using the Configuration Utility (continued) Using the Configuration Utility Click Next. Select to use a dynamic IP address (assigned by your DHCP server) or a Static IP address (recommended).

  • D-Link DVG-2001S, DVG-2001S User’s Manual 33 D-Link Systems, Inc. How do I assign a Static IP Address in Windows XP/2000? (continued) D-Link DFE-530TX+ Troubleshooting (continued) Troubleshooting Right-click on Local Area Connection. Click on Properties. Click on Internet Protocol (TCP/IP). Click on Properties.

  • D-Link DVG-2001S, DVG-2001S User’s Manual 38 D-Link Systems, Inc. Technical Specifications Technical Specifications Standards • IP, TCP, UDP, ARP, HTTP Connection Port • RJ-11, FXS Port • RJ-45 Ethernet Port Ethernet Port • IEEE 802.3 for 10M Ethernet • IEEE 802.3u for 100M Ethernet Telephony Support • SIP Call Control Protocol • Supports Audio CODEC: G.711 (A-law and U-law) G.723.1 G.726 G.729A G.168 (Echo Cancellation) • DTMF Relay G.711 (In Band)

  • D-Link DVG-2001S, DVG-2001S User’s Manual 4 D-Link Systems, Inc. D-Link ® , an industry leader in networking, introduces DVG-2001S VoIP Telephone Terminal Adapter for the home environment. The DVG-2001S converts any existing analog (cord or cordless) telephone into an IP Phone. Also by plugging in a FAX machine, the DVG-2001S will enable users to send and receive fax the same way as a traditional analog telephone line. The DVG-2001S supports the SIP protocol, which is the widely deployed by VoIP providers on the market. It also supports the most pop

  • D-Link DVG-2001S, DVG-2001S User’s Manual 5 D-Link Systems, Inc. Features Features • 1 Foreign Exchange Subscriber (FXS) POTS port (RJ-11 Jack) • 1 NWay 10/100BASE-TX Fast Ethernet port for network connection • Voice Activity Detection (VAD)/Comfort Noise Generation (CNG) • Silence suppression to reduce bandwidth consumption • Adaptive jitter buffer for smooth voice reception • Lost packet recovery ability for improved voice quality • Support QoS (Quality of Service) for voice quality guarantee • IP address assignment using DHCP or static configuration • Support Caller ID func

  • D-Link DVG-2001S, DVG-2001S User’s Manual 8 D-Link Systems, Inc. Note: if you have changed the default IP address assigned to the DVG-2001S, make sure to enter the correct IP address. Using the Configuration Utility Open a web browser and type in the IP address of the DVG-2001S. Using the Configuration Utility If you are going to connect the DVG-2001 to a D-Link router using the default LAN IP address (192.168.0.1), or to an existing network with a network IP of 192.168.0.xxx, plug the DVG-2001 into the router using an Ethernet cable and skip to the last step below. The default IP address of the DVG-2001 is 192.168.0.80. If you are setting up the DV

  • DVG-2001S User’s Manual 6 D-Link Systems, Inc. Phone Port Connect to your phone using standard phone cabling. Power Receptor Receptor for the provided power adapter. LAN Port Connects to your network or computer using a standard Ethernet cable. Rear Panel Hardware Overview Power LED A steady light indicates a proper connection to a power source. L

  • DVG-2001S User’s Manual 24 D-Link Systems, Inc. IP Address: Domain Name: Port: Server FQDN: Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is disabled when the SIP URL domain name is different from the SIP proxy server domain name. The phone will then use the domain name in Domain Name field as part

  • D-Link DVG-2001S, DVG-2001S User’s Manual 10 D-Link Systems, Inc. Using the Configuration Utility (continued) Using the Configuration Utility Click Next. If you selected Static, enter the IP address, subnet mask, default gateway, and DNS server(s). The default gateway and primary DNS server must be the (LAN) IP address of your router. Setup is finished. Click Restart to reboot the DVG-2001S. If you have selected Dynamic, the DVG-2001 will obtain an IP address from your DHCP server. You must use the new IP address to access the web based configuration utility on the DVG-2001. Click Restart. Once you are fi

  • D-Link DVG-2001S, DVG-2001S User’s Manual 37 D-Link Systems, Inc. Click the Connections tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Nothing should be checked. Click OK to continue. Go to the Advanced tab and click the button to restore these settings to their defaults. Troubleshooting Click OK out to the desktop and close any open windows.

  • D-Link DVG-2001S, DVG-2001S User’s Manual 41 D-Link Systems, Inc. What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs

  • D-Link DVG-2001S, DVG-2001S User’s Manual 16 D-Link Systems, Inc. Using the Configuration Utility Tools > Firmware Click on the link in this screen to find out if there is an updated firmware; if so, download the new firmware to your hard drive. Firmware Update: You can upgrade the firmware of the VoIP Terminal Adapter here. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link Support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support

  • D-Link DVG-2001S, DVG-2001S User’s Manual 31 D-Link Systems, Inc. VoIP > Telephony At this page, the DVG-2001S administrator can change the system password to access the http://192.168.0.80/admin page. Password: Enter the password here and the same password in the Confirm Password field. This will be the password that the administrator will use to gain access to the configuration menu of the device. The default password for this device is admin.

  • DVG-2001S User’s Manual 28 D-Link Systems, Inc. User Agent option of SIP congifuration can be configured through the screen shown on the right. VoIP > User Agent Phone Number: Display Name: User Agent Port: Authentication Name: Password: The telephone number assigned to the User Agent. The name that will be displayed when the User Agent is in use. This selects the por

  • D-Link DVG-2001S, DVG-2001S User’s Manual 27 D-Link Systems, Inc. Simple Traversal of UDP over NAT (STUN) is a protocol which enables a VoIP device, such as this TA or an IP phone, to detect the presence and type of NAT behind which the phone is placed. This TA supports STUN and can intelligently modify the private IP address and port in its SIP/SDP message by using the NAT mapped public IP address and port through a series of STUN queries against a STUN server located on the public Internet. This will allow SIP signaling and RTP media to successfully traverse a NAT without requiring any configuration changes on the NAT. STUN is useful if you need to use the DVG-2001S beh

  • D-Link DVG-2001S, DVG-2001S User’s Manual 13 D-Link Systems, Inc. Using the Configuration Utility Advanced > Misc DSCP (Differentiated Services Code Point) is an integer value encoded in the DS field of an IP header. The DSCP is an example of traffic marking because its value corresponds with a preferred QoS as the packet traverses the network. The DSCP value corresponds to a specific QoS. Differentiated Services (DS) is an approach to providing quality of service in networks; it employs a small, well-defined set of building blocks from which a variety of aggregate behaviors may be built. A short bit pattern in each packet, in the IPv4 Type o

  • D-Link DVG-2001S, DVG-2001S User’s Manual 25 D-Link Systems, Inc. When two SIP devices negotiate a SIP session, they must negotiate a common expiration time for idle SIP sessions. This field sets the shortest expiration time that the TA will accept. The TA checks the session expiration values of incoming SIP INVITE requests against the minimum session expiration value that you enter here. If the session expiration of an incoming INVITE request is less than this value, the TA negotiates with the other SIP dev

  • D-Link DVG-2001S, DVG-2001S User’s Manual 32 D-Link Systems, Inc. If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions: This section provides solutions to situations that can occur during the installation and operation of the DVG-2001S Adapter. 1. How do I assign a static IP address in Windows XP/2000? Please note that routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses. Double-click on Network Connections. Click

  • D-Link DVG-2001S, DVG-2001S User’s Manual 30 D-Link Systems, Inc. Peer to Peer option of SIP congifuration can be configured through the screen shown above. VoIP > Telephony DTMF Method: Payload Type: VAD: DTMF (dual tone multi frequency) is the signal to the telephone company that is generated when pressing a normal telephone’s touch keys (also known as touchtone phone). Payload Type will depend on the RFC (Request for Comment) you use. VAD (voice activation detection) allows the detection of absence of audio in the voice network and prevent the transmission of silent packets to conserve bandwidth.

  • D-Link DVG-2001S, DVG-2001S User’s Manual 11 D-Link Systems, Inc. Choose Dynamic IP Address to obtain IP Address information automatically from your DHCP server (e.g. router). Dynamic IP Address: Apply: Click Apply to save the changes. Using the Configuration Utility Home > LAN > Dynamic IP

  • D-Link DVG-2001S, DVG-2001S User’s Manual 23 D-Link Systems, Inc. Advanced Configuration The terminal adapter can be configured to handle voice signals over the Internet Protocol (Voice Over IP - VoIP). The screen shown below, along with those on the following pages, are used to configure your TA to communicate with the devices that will send and receive telephone calls over the Internet. This page can be accessible through http://192.168.0.80/admin. The username is Admin and the password is Admin (case-sensitive). WARNING: The following is for service pr

  • DVG-2001S User’s Manual 42 D-Link Systems, Inc. Version 1.0 Revised: 02/06/2006 Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Registration

Related Products and Documents (VoIP):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Vitek VT-IR1/24 Operation manual vitek/vt-ir1-24-PPJ.pdf 30 Dec 2022 4 3.64 Mb
2 Balboa Water Group Dolphin III Operation & user’s manual balboa-water-group/dolphin-iii-NP3.pdf 18 Mar 2024 15
3 Numark PRO TT-2 Owner's manual numark/pro-tt-2-P5P.pdf 12 Oct 2022 12
4 Rival CKRVRCM061 Instructions manual rival/ckrvrcm061-7N3.pdf 01 Nov 2023 8 0.93 Mb
5 Nacecare Numatic TT 516 Owner's instructions manual nacecare/numatic-tt-516-C88.pdf 17 Dec 2022 32
6 Philips HQ3870/33 Instructions for use philips/hq3870-33-52E.pdf 28 Feb 2023 2 1.69 Mb

Similar Resources:

  • Polycom

    VVX 411

    (7 pages)
    BEK CONNECT FOR BUSINESSBEK Connect is a cloud-based business communications solution that provides reliable, scalable and feature-rich infrastructure with unmatched quality of service.No Capital Investment – Never buy a phone again!Never become obsolete, keep pace with technology • No upfront costs and ability to increase or decrease the number of pho …
  • Polycom

    VVX 250

    (2 pages)
    Polycom® VVX® 250, 350, and 450 Business IP Phones - Quick Tips These Quick Tips apply to VVX 250, 350, and 450 business IP phones. Main Menu Screen Displays menu options for settings and device information. Available anytime. Calls Screen Displays all Active and Held calls. Available when you have an Active or Held calls in progress. Lines Screen Display …
  • Kaser

    PhoneNet

    (1 pages)
    Phone-Net - VOIP Gateway for SOHO/Residential•Use the same standard home phonefor both PSTN and VOIP calls•Increased availability by forwardingincoming VOIP calls to your mobilephone•Long distance and international tollbypass from your mobile phone •Forward instant messages to yourmobile phone via SMS•Free 3-Way conference callingbetween PSTN and V …
  • Polycom

    VVX 300 SERIES

    (4 pages)
    Quick Start Guide� …
  • Teledex

    M SERIES

    (28 pages)
    M SERIES ANALOGUSER GUIDEFor M1005, M10010, M100TRM, M2005, M20010, M200TRM, M100C5, M100C10, M200C5, M200C10, Alarm Clock Remote Control, M1035, M10353, M10356, M10310, M103103, M103106, M103HDKT, M1033HDKT, M1036HDKT, M2035, M20353, M20356, M20310, M203103, M203106, M203HDKT, M2033HDKT, M2036HDKT …
  • Avaya

    PARTNER

    (4 pages)
    Copyright 2005 Avaya Inc.All rights reservedPrinted in U.S.A.Document Number 15-300601June 2005 (Issue 1)PARTNER is a registered trademark of Avaya Inc.PARTNER PC CARD Installation InstructionsThis PC Card is used with a PARTNER® Small Office Edition system. These instructions are designed for any one of the following types of PC Cards:■ Backup/Restore Ca …

Comments, Questions and Opinions: