D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device Product Manual

Text of D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device User Guide:

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 43 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Configuration Menu Select the value desired by moving the selection up or down in the list box. Selecting a setting that is too low or too high may will have an adverse effect on your DVC-2000’s performance. Contact your Internet Service Provider or Network Administrator for correct values. The send and receive settings can be different speeds. Typically Cable and DSL modems receive at a higher speed and send at a lower speed. Main Screen> Settings > Network > Network Speed

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Using the Configuration Menu 42 DVC-2000 User’s Manual Network Speed The Network Speed screen offers you the option of selecting the speed that is the best match for your current network or connection. Change the settings by selecting the send or receive Change button and Main Screen> Settings > Network > Network Speed

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 49 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Configuration Menu Audio Privacy prevents the audio on your side from being sent to the remote caller. No one on the other end of the VideoPhone call will be able to hear you if this setting is checked, although they can see you. Video Privacy keeps your video from being sent to the remote caller. The person on the other end of the videoconference call will not be able to see you if this setting is checked. This setting will keep a caller from being able to connect to your VideoPhone. When a caller tries to connect with you, they will receive a

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Getting Started 10 DVC-2000 User’s Manual Getting Started BEFORE YOU BEGIN! Read the section on Opening Ports with Routers and Gateways starting on page 51 in this manual if you are using the DVC-2000 VideoPhone with a router, gateway or broadband modem. The DVC-2000 needs to be setup before use. You can use the Quick Installation Guide (included with the DVC-2000) to perform the hardware installation. Each cable (Ethernet, phone, and AC power) supplied for the i2eye has a different color on the end that connects to the DVC-2000. Plug the cables into the matching color coded connector on the b

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Using the DVC-2000 22 DVC-2000 User’s Manual Placing a VideoPhone Call 1. Press the Broadband button if you are not in Broadband Mode already. 2. Pick up the telephone handset. 3. The DVC-2000 VideoPhone senses the phone is off the hook and a message appears stating Ready to dial phone number. You can either enter a phone number or press the Speed Dial button to select the Speed-Dial List. 4. Enter the phone number into the DVC-2000 just as if you were using a regular phone. See Entering Phone Numbers on the next page for help

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 3 DVC-2000 User’s Manual D-Link Systems, Inc. Table of Contents Add ...............................................................................................................31 Remove ........................................................................................................31 Edit ...............................................................................................................31 Close .............................................................................................................31 View ...........................................

• D-Link Systems, Inc. Hardware Overview 8 DVC-2000 User’s Manual LEDs PSTN* LED This LED indicates when you are in PSTN mode. To toggle to this mode, press the Broadband button. STATUS This LED should only light momentarily when powered on. If the LED remains on, please contact Technical Support. LINK LED A solid light indicates a good Ethernet connection.

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 31 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Configuration Menu Add To add a Speed Dial entry, enter a name and a number (or an IP address). Click OK to complete the addition of a Speed Dial entry. Main Screen> Dial > Add Remove Removes a selected entry from the Speed Dial list. Edit Allows the modification of either the name or number (or IP address) of the selected Speed Dial entry. Close Closes the Dial screen, saving the current entries to the Speed Dial list.

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 53 DVC-2000 User’s Manual D-Link Systems, Inc. Port Configuration You have now completed the entering of one port to be opened. You will need to open six more ports. Repeat steps A through G five more times for each one of the following five ports: 15329, 15330, 15331, 15332 and 15333. The last port will be opened slightly differently:  Repeat steps A through C on the previous page.  Choose TCP as the Protocol Type  Enter 1720 as the Private Port and Public Port  Under Schedule, Click Always  Click Apply to complete You have

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Using the Configuration Menu 48 DVC-2000 User’s Manual To adjust the volume press the right arrow to increase the setting and the left arrow to decrease the setting. The slider bar will indicate the volume level. 1. Click the Apply button to save the change. 2. Press OK after you are done to return to the Settings screen. Note: If the microphone volume level is set too high, it may cause audible feedback, resulting in an echo that can affect how clearly the other party hears you. Mic Vol You can adjust the volume of the built-in microp

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 19 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Setup Wizard Using the DVC-2000 in PSTN Mode The DVC-2000 offers two different operating modes, PSTN mode and Broadband mode. PSTN Mode is the default startup mode and functions as a standard telephone. The PSTN screen appears after you’ve completed the Setup Wizard (as shown below). To dial, lift up the receiver or press the speakerphone button and you can make a call as you normally would via your standard phone connection. In PSTN mode you will not be able

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Using the Configuration Menu 28 DVC-2000 User’s Manual Dial: View: Settings: Privacy: Set up a speed dial list and choose from several methods of placing a call to other VideoPhones. You can make a call by entering an i2eye VideoPhone number, by entering an IP address, or select an entry on the speed dial list. Allows you to specify what is seen on the main application screen. Choose full screen view or the default view, as well as Internet connection status. Change settings relating to video calls, personal informati

• 57 DVC-2000 User’s Manual D-Link Systems, Inc. Network Configuration 7. Poor video in a call Camera out of focus. The far site should focus their camera by twisting the knob on the VideoPhone until the image is in focus. Incorrect Network Speeds. See Incorrect Network Speeds Section in this Trouble Shooting Guide Excessive motion in the picture you are receiving. A ba

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 17 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Setup Wizard DNS If you chose Fixed IP on the Network Address screen (described on the previous pages) you will see the screen for setting DNS server addresses. The DNS screen asks for information regarding the Domain Name System (DNS) server. You should be able to get both of these settings from your router configuration settings, ISP, or your network administrator. Only the primary DNS server address is required, though it is best to have both the primary and secondary addresses. The Domain Name System (DNS) translates Internet domain names

• 65 DVC-2000 User’s Manual D-Link Systems, Inc. Technical Specifications Technical Specifications Internal Processor ARM-9 ASIC Communication Processor Standards Compliant ITU H.323 (IP communications) Video: H.263 Audio: G.711, G.723 Data Rates/Frame Rates 64 Kbps—512 Kbps Up to 30fps Video Up to 30fps CIF (352 x 288 pixels), QCIF (176 x 144) Picture-I

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 59 DVC-2000 User’s Manual D-Link Systems, Inc. Network Configuration 18. VideoPhone cannot obtain IP address automatically Not properly connected to a DHCP server. Check connection to LAN, by verifying a link light on the back of the VideoPhone. Make sure that the router is setup for DHCP. Consult either your router’s user manual for reference or your network administrator. IP address is not accessible to the VideoPhone. Need to statically assign an IP address, subnet mask, gateway and DNS values. If the VideoPhone is on a private network consult your router’s user manual or n

• D-Link Systems, Inc. Using the Setup Wizard 18 DVC-2000 User’s Manual The Network Speed screen asks you to select the type of broadband Internet connection you use. Each choice has default send and receive speeds defined for you. If you need to change these settings after completing the Setup Wizard, this can be done by selecting the Settings > Network &

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Technical Specifications 66 DVC-2000 User’s Manual LED Indicators Status PSTN Link User Interface Dialing Diagnostics Quality of service measurement Manual or auto answer Incoming Caller ID Privacy shutter via video mute and/or audio mute Do Not Disturb mode Dialing Capabilities Speed dial list allows up to 50 entries Manual dialing with telephone handset using Directory Service Manual dialing with direct IP entry Remote Software Update Software update, automatic or manual Network Standard:IEEE 802.3 IP-b

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 67 DVC-2000 User’s Manual D-Link Systems, Inc. Country Codes 93 Afghanistan 355 Albania 213 Algeria 684 American Samoa 376 Andorra 244 Angola 809 Anguilla 268 Antigua 54 Argentina 374 Armenia 297 Aruba 247 Ascension Island 61 Australia 43 Austria 994 Azerbaijan 242 Bahamas 973 Bahrain 880 Bangladesh 246 Barbados 375 Belarus 32 Belgium 501 Belize 229 Benin 809 Bermuda 975 Bhutan 591 Bolivia 387 Bosnia and Hercegovina 267 Botswana 55 Brazil 284 British Virgin Islands 673 Brunei 359 Bulgaria 257 Burundi 855 Cambodia 237 Cameroon 1 Canada 238 Cape Verdi 345 Cayman Is

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Technical Support 68 DVC-2000 User’s Manual 218 Libya 423 Liechtenstein 370 Lithuania 352 Luxembourg 853 Macao 389 Macedonia 261 Madagascar 265 Malawi 60 Malaysia 960 Maldives 223 Mali 356 Malta 692 Marshall Islands 222 Mauritania 230 Mauritius 52 Mexico 373 Moldova 33 Monaco 976 Mongolia 473 Montserrat 212 Morocco 258 Mozambique 95 Myanmar (Burma) 264 Namibia 674 Nauru 977 Nepal 31 Netherland

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 35 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Configuration Menu Name: Country Code: Area Code and Phone Number: Personal Information Main Screen> Settings > Personal Information Enter your name here. When a call is placed from your VideoPhone, the name you enter will be displayed as a Caller ID on the remote end of the call. Unless the VideoPhone you call has auto-answer turned on, the party you wish to call will decide whether or not to accept your call based on this name. Each country is assigned a country

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 29 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Configuration Menu If this warning screen appears, click OK and you will be shown the IP address configuration screen. Dial The Dial screen contains the Speed Dial List as well as buttons to manage the Speed Dial List and make manual VideoPhone calls This list contains up to 50 Speed Dial entries. Click the Add button to add to this list. A name is dialed by highlighting the item and pressing the OK button on the DVC-2000. After 10 entries are created, the Speed Dial List will scroll to display entries 11 through 50. Speed Dial List: Mai

• 25 DVC-2000 User’s Manual D-Link Systems, Inc. Using the DVC-2000 Calling a VideoPhone with a Different Area Code To complete a call to another VideoPhone with the same country code, but a different area code (i.e., “a long-distance” call), enter the area code and phone number of the party you are calling. (Remember: The DVC-2000 uses the Internet for completing calls and not

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 9 DVC-2000 User’s Manual D-Link Systems, Inc. Hardware Overview Buttons Numeric keypad used for dialing numbers. The asterisk button functions as a period(.) in Broadband mode. The numeric keypad functions the same as a keypad on a standard telephone when in PSTN mode. The directional arrows are used to navigate through the interface. When entering alphanumeric information the left arrow key performs a backspace, deleting the character to the left of the on-screen cursor. OK is use

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 39 DVC-2000 User’s Manual D-Link Systems, Inc. Using the Configuration Menu Primary DNS: Secondary DNS: Enter the Primary Internet DNS (Domain Name System). These are Internet server addresses that you should be able to obtain from your router configuration settings, ISP, or network administrator. Enter the Secondary DNS address if you have one. Though both primary and secondary DNS addresses are preferred, only the primary address is required. The Domain Name System (DNS) translates Internet domain names (for example www. dlink.com which is easy for people to use and remember) to IP addresses, which are what computers use to find each other on t

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, 5 DVC-2000 User’s Manual D-Link Systems, Inc. Introduction Introduction Imagine high-quality, low-cost videoconferencing from a standalone, easy to use communication appliance. The D-Link ® i2eye ™ DVC-2000 Broadband VideoPhone accomplishes this. The D-Link i2eye introduces the world of videoconferencing over the Internet. The previously complicated process of conducting a videoconference is simplified with the i2eye DVC-2000. Since the DVC-2000 is a standalone device, you do not need a computer to videoconference over the Internet. Use the built in display or connect to a television for viewing. Connect your broadband

• D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device, D-Link Systems, Inc. Registration 72 DVC-2000 User’s Manual Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.4 April 30, 2007

More Instructions:

	D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device Manual  01-08-2022 75	DOWNLOAD
	D-Link DVC 2000 - i2eye Broadband VideoPhone Video Conferencing Device Quick installation manual 19-12-2022 12	DOWNLOAD

Related Products and Documents (Conference System):

Comparable Devices:

Similar Resources:

• AVIRE DCP (23 pages) 1DCP WAVE Digital Communication Platform with integrated Digital Audio UnitInstallation GuideRef No: MU-89112AV101V01 GBProduct Part Number:4G: AC-4CT18-100-0-4L-0002G: AC-2CT18-100-0-2L-000The DCP WAVE combines the Digital Communication Platform (DCP) with the Top-of-Car Digital Audio Unit (TOC DAU) into one device and provides 2-way communication from insi …

• Crestron Mercury CCS-UCA-SMK (2 pages) DO GUIDECCS-UCA-SMK Swivel Mount Kit for Crestron Mercury™ Tabletop Conference SystemDO Prepare the Mounting LocationNOTE: The mounting surface should have a thickness of 1" (25 mm) to 1-3/8" (34 mm).The kit includes a template that is used to mark the location of the mounting hole on top of the mounting surface, and the location of the stop pla …

• Aethra Theseus (2 pages) THESEUSVIDEOPHONEQUICK START GUIDEInstalling The Theseus is simple and easy. For easier installation follow the step-by-step procedure below.Remove The Theseus and accessories from packing. Make sure that all the parts shown in the figure are present.Step 1. UNPACKING THE BOXStep 2. Handset InstallationThe THESEUS guarantees optimum reproduction and trans …

• Yealink W90 (4 pages) W90 DECT IP Multi-Cell SystemQuick Start Guidehttp://support.yealink.com/For W90DM/W90B rmware 130.85.0.15 or laterFor W59R rmware 115.85.0.20 or laterFor W53H rmware 88.85.0.20 or laterFor W56H rmware 61.85.0.20 or laterFor CP930W rmware 87.85.0.20 or laterFor DD phone rmware 66.85.0.15 or later (V85.16) …

• Mitel UC360 (8 pages) M MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective holders. © Copyright 2014, Mitel Networks Corporation. All Rights Reserved.MITEL UC360 COLLABORATION POINT INSTALLATION GUIDE A …

• Cisco TelePresence MCU 4203 (6 pages) © 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 6 Data Sheet Cisco TelePresence MCU 4200 Series Figure 1. Cisco TelePresence MCU 4200 Series Product Overview The Cisco TelePresence® MCU 4200 Series is the industry’s leading standard-definition (SD) multimedia conferencing bridge (Figure …

Comments, Questions and Opinions: