Manualios.com

D-Link DSL-300I - DSL 300 - 8 Mbps Modem Operation & User’s Manual

  • DSL-300I - DSL 300 - 8 Mbps Modem Modem
  • map/jXDowIocg
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 36

D-Link DSL-300I - DSL 300 - 8 Mbps Modem Manual Online:

3.65, 912 votes
D-Link DSL-300I - DSL 300 - 8 Mbps Modem User Manual
D-Link DSL-300I - DSL 300 - 8 Mbps Modem User Guide
D-Link DSL-300I - DSL 300 - 8 Mbps Modem Online Manual

Text of D-Link DSL-300I - DSL 300 - 8 Mbps Modem User Guide:

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 10 2. The Welcome window recommends exiting all other programs before starting the setup procedure. If you do not wish to close other programs click Cancel, otherwise quit all other programs and click Next . 3. The User Information window asks you for your name and company name. Enter this information in the appropriate field and click Next . 4. In the Choose Destination Location window you may accept to install DSL-300 Configuration Utility in the automatically chosen directory by clicking Next . Or you can click Browse if you wish to select a d

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 5 LED Indicators LED Indicators The LED Indicators read as follows: Power Steady green light indicates the unit is powered on. Status Lights steady green during the ADSL negotiation phase. Once the connection status has been settled, the light will blink green. ADSL: Link Steady green light indicates a valid ADSL connection. This will light after the ADSL negotiation process has been settled. ADSL: Act Blinking green light indicates an active WAN session. Ethernet: Link Steady green light indicates a valid Ethernet connection. Ethernet: Act Blinking green indicates an active Ethernet session. Unpacking Open the shipping carton and care

  • DSL-300 ADSL Ethernet Modem User’s Guide 17 The General ADSL Information menu displays information on packets received and transmitted via the ADSL line as well as the ADSL settings. This is where you can change the VCI and VPI values, as described in the previous section. The Ethernet Information menu provides information about packets received and transmitted via the Ethernet interface.

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 11 5. The Select Program Folder window asks you to select a different folder or you can rename the D-Link DSL Family folder that has been created for the program icon. You can rename the folder by typing in a new name in the “Program Folder:” field. Click Next to continue. 6. The Start Copying Files window provides an opportunity to review the information you have just entered. If you are satisfied with the information as it is listed, click Next . If you need to change any of the

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 23 When you select a Router to upgrade you will be prompted for a password. The default password is Admin . If you want to change the password, you can change it using the console manager interface as described in Appendix B. Enter the password and click OK. In the new window you will see the MAC address of the Router and the IP address of the PC you are using. The PC and the Router must be on the same subnet for the upgrade to be completed. The upgrade utility will suggest a new IP address to be temporarily assigned to the device during the firmware upgrade procedure. Check the suggested IP address listed for the Router to be sure that it d

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 1 About This User’s Guide This user’s guide provides instructions on how to install the DSL-300 ADSL Modem and use it to connect a PC or Ethernet LAN to the Internet or a remote LAN. For the sake of simplicity, this document uses the terms Modem (first letter upper case) to refer specifically to the DSL-300 ADSL Modem, and modem (first letter lower case) to refer to all such devices including the DSL-300. This guide assumes that the reader has some familiarity with Ethernet networks, networking devices, and the TCP/IP suite of protocols. Before You Start For the smoothest possible insta

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 7 Connect Ethernet LAN to Modem The Modem may be connected to any 10BASE-T Ethernet LAN. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10 Mbps only. Use standard twisted-pair cable with RJ-45 connectors. The RJ-45 port on the Modem is a straight-through (MDI-II) port. Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection. You should use a normal straight-through cable when connecting the Modem to a normal (MDI-X) port on a switch or hub. Use a crossed cable when connecting it to an uplink (MDI-II) port on a hub or switch. When conn

  • DSL-300 ADSL Ethernet Modem User’s Guide 20 A Technical Specifications General Standards: ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) ITU G.994.1 (G.Hs) ANSI T1.413 (Issue 2) Protocol: TCP/IP Data Transfer Rate: G.dmt full rate: Downstream up to 8 Mbps Upstream up to 640 Kbps G.lite: Downstream up to 1.5 Mbps Upstream up to 512 Kbps Media Interface Exchange: RJ-11 port ADSL telephone

  • DSL-300 ADSL Ethernet Modem User’s Guide 22 C DSL-300 Firmware Upgrade Utility You can update system firmware using the DSL-300 Firmware Upgrade Utility. To upgrade the Router’s firmware you must have installed this software on the PC you wish to use for this purpose. Install the utility by clicking the self- executing file setup.exe located on the Installation CD-ROM. It will be instal

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 15 5. In the new window you must enter the VPI and VCI numbers (assigned to you by your ADSL service provider). Type in these numbers in the ADSL Setting field and click Finish . 6. The Save configuration and restart system window will appear. You will be asked if you would like to save the changes you have made (the VPI and VCI numbers) and restart the Modem. Click Yes if you have correctly entered the necessary information. 7. The final window, Configuration saved , confirms that

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 13 Configure The Modem With the DSL-300 Configuration Utility software installed, you are ready to configure the Modem. You must enter the VPI and VCI values that have been given to you by your ADSL service provider to define the path of connection to the ATM network backbone. Click the DSL-300 Configuration Utility icon to initiate the configuration of the Modem. The DSL-300 Configuration Utility will locate the Modem on your LAN. 1. If the DSL-300 and corresponding MAC

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 14 3. In the Enter Password window, type in the password and click OK . The default password is “Admin”. You can change this password using a console manager as described in Appendix B. 4. The main menu appears, click on the General ADSL Information tab to configure the Modem.

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 21 B Creating a New Password You should change the access password for the DSL-300 Configuration Utility program when you first setup the device. In order to change the password you will need a console program such as Microsoft HyperTeminal installed on your PC and an RS-232 cable. The HyperTerminal program is included with Windows operating systems. If it is not available see the instructions for installing HyperTerminal from the Windows installation program. Once it is installed, you can access HyperTerminal from the Start menu. To access HyperTerminal, choose Accessories, then select the Communications

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 3 Modem Description and Operation The DSL-300 ADSL Ethernet Modem is easy to install and use. The DSL-300 connects to an Ethernet LAN via a standard Ethernet 10BASE-T interface. Your ADSL connection is made using ordinary twisted-pair telephone line with standard RJ-11 connectors. Several PCs can be networked in an Ethernet LAN and connected to the Internet via the Modem. Product Features The DSL-300 ADSL Ethernet Modem utilizes the latest ADSL enhancements and technologies to provide a reliable Internet portal suitable for most small to medium sized offices. G.hs (Auto-handshake) This feature allows the Modem to use either the

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 4 Front Panel Place the Modem in a location that allows a view of the LED indicators shown in the front panel diagram below. Front Panel Rear Panel The rear panel of the Modem provides access to the power cord connection as well as the various communication port connections. Rear Panel

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, TABLE OF CONTENTS ABOUT THIS USER’S GUIDE ........................................................................................................................... 1 B EFORE Y OU S TART ............................................................................................................................................ 1 ADSL Service ................................................................................................................................................. 1 Micro-filters ............................................................................................

  • Registration Card Print, type or use block letters. Your name: Mr./Ms______________________________________________________________________________________ Organization: ________________________________________________Dept. ______________________________________ Your title at organization:__________________________________________________________________________________ Telephone:__

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, Offices AUSTRALIA D-LINK AUSTRALASIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61-2-9417-7100 FAX: 61-2-9417-1077 TOLL FREE: 1800-177-100 (Australia), 0800-900900 (New Zealand) URL: www.dlink.com.au E-MAIL: [email protected], [email protected] CANADA D-LINK CANADA 2180 Winston Park Drive, Oakville, Ontario L6H 5W1 Canada TEL: 1-905-829-5033 FAX: 1-905-829-5223 BBS: 1-965-279-8732 FREE CALL: 1-800-354-6522 URL: www.dlink.ca FTP: ftp.dlinknet.com E-MAIL: [email protected] CHILE D-LINK SOUTH AMERICA Isidora Goyenechea #2934 of.702, Las Con

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 6 Hardware Installation In this chapter you will learn about the various connections you will need to make in order to use the Modem. When selecting the location for the Modem be sure to allow room to access the connections on the rear panel. You will want to place the Modem so that you will be able to see the LED indicators on the front panel. Allow some space above the Modem for ventilation to avoid problems with overheating. Connect the Power Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Modem and plug the adapter into a nearby power source. You should see the Power LED indicator light up and remai

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, JAPAN D-LINK JAPAN 10F, 8-8-15 Nishi-Gotanda, Shinagawa-ku, Tokyo 141 Japan TEL: 81-3-5434-9678 FAX: 81-3-5434-9868 URL: www.d-link.co.jp E-MAIL: [email protected] RUSSIA D-LINK RUSSIA Michurinski Prospekt 49, 117607 Moscow, Russia TEL: 7-095-737-3389, 7-095-737-3492 FAX: 7-095-737-3390 E-MAIL: [email protected] SINGAPORE D-LINK INTERNATIONAL 1 International Business Park, #03-12 The Synergy, Singapore 609917 TEL: 65-774-6233 FAX: 65-774-6322 URL: www.dlink-intl.com E-MAIL: [email protected] S. AFRICA

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, i Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6. Bei der Aufstellung des Gerätes ist auf sichern Stand zu achten. Ein Kippen oder Fallen könnte Verletzungen hervorrufen. Verw

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 12 7. In the Setup Complete window you are presented with the option to launch the DSL-300 Configuration Utility program. If you wish to start the program now, click in the vacant box next to the “Yes, Launch the program file” option. A check mark ( √ ) should appear in the box indicating it has been selected. Click Finish to launch DSL-300 Configuration Utility. A DSL-300 Configuration Utility icon should now be seen on your desktop screen.

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, ii DEFECTIVE PRODUCT, BUT NEED NOT BE IDENTICAL. ANY PRODUCT OR PART REPAIRED BY D-LINK PURSUANT TO THIS WARRANTY SHALL HAVE A WARRANTY PERIOD OF NOT LESS THAN 90 DAYS, FROM DATE OF SUCH REPAIR, IRRESPECTIVE OF ANY EARLIER EXPIRATION OF ORIGINAL WARRANTY PERIOD. WHEN D-LINK PROVIDES REPLACEMENT, THEN THE DEFECTIVE PRODUCT BECOMES THE PROPERTY OF D-LINK. WARRANTY SERVICE MAY BE OBTAINED BY CONTACTING A D-LINK OFFICE WITHIN THE APPLICABLE WARRANTY PERIOD, AND REQUESTING A RETURN MATERIAL AUTHORIZATION (RMA) NUMBER. IF A REGISTRATION CARD FOR

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, DSL-300 ADSL Ethernet Modem User’s Guide 24 off the Router while the flash memory is being updated. A warning will appear during the upgrade reminding you not to power off the device. When the new firmware has been successfully loaded a new window will inform you of the upgrade and tell you that the Router has been restarted. Click OK to proceed.

  • DSL-300 ADSL Ethernet Modem User’s Guide 16 Modem Diagnostics The DSL-300 Configuration Utility can be used to monitor the activity and performance of the Modem. The four status windows are read-only with the exception of the General ADSL Information. Once you have set the VCI and VPI values there should not be any need to change them. You can choose the interval in which t

  • D-Link DSL-300I - DSL 300 - 8 Mbps Modem, iv FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

Related Products and Documents (Modem):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 MAC PARA SPICE Operation & user’s manual mac-para/spice-48T.pdf 15 Aug 2023 12
2 Philips 31607-48-16 Safety instructions philips/31607-48-16-7OM.pdf 09 Feb 2023 30 2.47 Mb
3 Electrolux Ecostore 727273 Short form specification electrolux/ecostore-727273-915.pdf 15 Sep 2023 3 0.09 Mb
4 CYP PU-44XL-KIT Operation manual cyp/pu-44xl-kit-VFO.pdf 28 Apr 2023 20 5.34 Mb
5 Felisatti RS135 Original instruction manual felisatti/rs135-499.pdf 20 Sep 2023 116
6 BMW 530D GRAN TURISMO BROCHURE 201 Brochure bmw/530d-gran-turismo-brochure-201-489.pdf 03 Dec 2022 46 12.63 Mb

Similar Resources:

  • Ubiquiti

    NanoStation loco

    (20 pages)
    NanoStation loco Zip TiePackage ContentsInstallation RequirementsShielded Category 5 (or above) cabling with drain wire should be used for all outdoorwired Ethernet connections and should be grounded through the AC ground of thePoE.We recommend that you protect your networks from harmful outdoor environmentsand destructive ESD events with industrial-grade, s …
  • Bausch Datacom

    Vega 56 PC2

    (27 pages)
    Vega 56 PC2 Users manual 07/06/1999 Bausch Datacom 1 Bausch Datacom nv/sa Vega 56 PC2 Internal ISA-Voice/Fax Modem Dual Standard V.90/K56Flex Vega 56 PC2 …
  • SMC Networks

    SMC8505T

    (2 pages)
    Unmanaged SwitchSMC8505T / SMC8508TEZ Switch 10/100/1000 Standalone 5/8-port10/100/1000 Unmanaged Switchwww.smc.comThe SMC family of EZ Switch 10/100/1000 GigabitEthernet Switches are the perfect solution for bottleneckson your network. Bottlenecks are the inevitable result ofdata-intensive applications like home movies or digitialimages and more computers b …
  • Patton electronics

    RocketLink 3202

    (107 pages)
    RocketLink™ Model 3202 2Base-TL Ethernet First Mile G.SHDSL ModemGetting Started GuideSales Office: +1 (301) 975-1000Technical Support: +1 (301) 975-1007E-mail: [email protected]: www.patton.comPart Number: 07M3202-GS, Rev. CRevised: January 24, 2011 Start InstallationFor Quick …
  • 2Wire

    DSL Line Combiner

    (1 pages)
    DSL Line CombinerThe 2Wire DSL Line Combiner merges both the DSL and your home telephoneservice into a single line, enabling you to connect the 2Wire HomePortal to yourexisting home telephone wiring to create a home network.Installation InstructionsConnect a telephone cord from the telephone wall jack to the port labeledPHONE WALL JACK on the DSL Line Combin …
  • Conceptronic

    CBT56

    (35 pages)
    NEDERLANDS Conceptronic CBT56 Snelstart handleiding Hartelijk gefeliciteerd met de aanschaf van uw Conceptronic Bluetooth® 56K Modem. In de bijgaande Snelstart handleiding wordt stap voor stap uitgelegd hoe u de Conceptronic Bluetooth® 56K Modem installeert. Ingeval van problemen adviseren wij u onze support-site te bezoeken (ga naar: www.conceptron …

Comments, Questions and Opinions: