D-Link ShareCenter Pulse DNS-320 Operation & User’s Manual

Text of D-Link ShareCenter Pulse DNS-320 User Guide:

• D-Link ShareCenter Pulse User Manual Page 96 The D-Link Widget is mainly used for monitoring the activities taking place on your ShareCenter Pulse.    , ShareCenter Pulse, IP Address, Firmware Version and Current Operational Temperature are displayed. In the Hard Drive window information about the storage space o

• D-Link ShareCenter Pulse User Manual Page 54 Here the user can enable the Time Machine option. After enabling the Time Machine option the following window will appear. In this window the user can add, delete and view Time Machine entries. To add an entry, click on the ‘Add’ button. To delete an entry, click on the ‘Delete’ button. To remove all the Time Machine entries, click

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 10 5. Connect an Ethernet cable to the available Ethernet port. This cable should connect the ShareCenter Pulse to your local network via a router or switch, or directly to a computer for configuration. Make sure to align the drive connector to the SATA connector on the bottom edge inside the drive bay of the ShareCenter Pulse. Gently push the drive in until it connects. When a drive is inserted properly, you will feel it “seat” into the connector. Some hard drives that are thin or oddly shaped may need to be guided care

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 32 user account. Enter the quota amount in the block indicated in Megabytes. By entering 0Mb the quota will be set to unlimited. Click on the ‘Back’ button to return to the previous window. Click on the ‘Next’ button to accept the change and continue to the next window. Click on the ‘Exit’ button to discard the changes made and return to the User/Group window. Click on the ‘Back’ button to return to the previous window. Click on the ‘Completed’ button to accept the change and complete the wizard. Click on the ‘Exit’ button to discard the changes made and return to the User/Gro

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 39 are allowed to access this folder(s). Select ‘All account’ to allow access to this folder to all the accounts. Select ‘Specific User/group’ to only allow certain users or groups access to this folder. Click on the ‘Back’ button to return to the previous window. Click on the ‘Next’ button to accept the change and continue to the next window. Click on the ‘Exit’ button to discard the changes made and return to the Network Shares Page. the share. You can choose to give ‘Read Only’ or ‘Read Write’ access to the folder,

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 26 Click on “Browse” to search for the specific language pack you want to install. After selecting the language pack, then click “Apply” to install the language pack. language needs. In the summary section the loaded language packs will be displayed and can be enabled at will by simply clicking the (>) play button. More than one language pack can be installed, but only one language pack can be used at a time. Keep a keen lookout on D-Link’s local website for new Language Packs.

• D-Link ShareCenter Pulse User Manual Page 52 certain folder that will be included in the UPnP AV Server folder list. Select the appropriate folder and click on the ‘Save Settings’ button to add the folders.

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 29 The following section will describe how to add a new user on this device. To add a user click on the ‘Add’ button. A easy to configure wizard will be launched and look like the following: This window welcomes the user to the setup wizard for adding or modifying a user. This wizard will guide the user through the steps of setup. In this wizard the user will be able to: 1) Create a new user account. 2) Join the user to a group. 3) Configure the appropriate network shares settings. 4)

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 98  Operating Temp : 0 ~ 40°C Operating Humidity : 90% Maximum (Non-condensing) Storage Temp : -20 ~ 50°C Storage Humidity : 5 ~ 90% (Non-condensing) Dimensions : Item: 18.2 x 14.6 x 11.3 cm (h/l/w) Packaging: 18.2 x 14.6 x 11.3 cm (h/l/w) Weight : 0.8 kg EMI : FCC Class B, CE, VCCI, CSA, C-Tick  Power Adapter : 12V/4A Ethernet Port : 1 x 10/100/1000 Gigabit Ethernet Port Reset button : Reset to factory default settings LED Indicators : Power, LAN, HDD1, HDD2, USB  Standards : IEEE 802.3 10Base-T Etherne

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 49   confirmations. The first warning should look like this. Click on the “” button to accept the security change. The second warning should look like this. Click on the “” button to accept the security change. The next step is to get the certificate for the connection. Click on the “” button to acquire the certificate.

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 75 Displays the local network settings of the ShareCenter Pulse. y of the device information here. Displays the workgroup, name, description and current temperature of the ShareCenter Pulse. mode, total size, used and remaining drive space.

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 61 The current firmware version is displayed here. The current firmware version date is displayed here. When upgrading the firmware, click Browse to select the new firmware file on your local computer. Click Apply to begin the firmware upgrade process.   upload them to the device. This section provides a link to check for new firmware on the D-Link support website. If a new firmware is available, download the file to your local computer.

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 94   will start and take some time to finish. To monitor the progress of the Auto Rebuilding process you can go to  and monitor the   to know how far the Rebuilding process is. Alternatively you can also use your  to monitor the progress of the Rebuilding process.

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 4  • D-Link ShareCenter Pulse 2-Bay Network Storage • CD-ROM with Manual and Software • Quick Installation Guide • Power Adapter • CAT5 Ethernet Cable Note: Using a power supply with a different voltage than the one included with the ShareCenter Pulse will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. For best results, the following system requirements are recommended: • Computer with: 1GHz processor / 512 MB RAM / 200 MB available space / CD-ROM drive • Internet Explorer version 7.0 or Mozil

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 15 that RAID 1 can use on the hard drives installed. Then the user can configure the desired capacity to be used for the RAID 1 configuration by entering the desired capacity amount in the block provided. To utilize the remaining space, (if the two HDDs differ in capacity), the user can choose to use JBOD for the remaining space. Tick this option is needed. Click ‘’ to continue. In this section a summary of the configuration will be displayed. When ready click on the ‘�

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 42 Here the user can enable the quota settings option. Once the quota settings have been enabled the Status will change to started. users. Assigning a quota to a group or user will limit the amount of storage they are allocated. By default, users and groups do not have a quota. In this window all the users with their respective quotas will be displayed. Here the user can quickly and easily change the quota for each individual user by simply clicking on th

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 2 Page 2   Package Contents ..........................................................................4 System Requirements ....................................................................4 Introduction .......................

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 24 Enter the complete time and date settings manually. Click ‘Save Settings’ to apply these settings. To synchronize the device clock with your computer, click the ‘Set time from my computer’ button. ime configuration option allows you to configure, update, and maintain the correct time on the internal system clock. In this section you can set the time zone that you are in, and set the NTP (Network Time Protocol) Server in order to periodically update your system time from the NTP Server. You can also use your computer’s time as th

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 64 Enable or Disable HDD Hibernation settings. Set the amount of idle time before the drives will go into hibernation.  to shut down while power remains constant to the device. The drives will power up again when data is accessed. Enable or disable Power Recovery. The Power Recovery feature will automatically restart your device from a previously unexpected shutdown due to a power failure. If using “Auto” mode, the speed of the fan will change (Off/Low/High) depending on the internal temperature of the enclosure. Enable of disable the power off

• D-Link ShareCenter Pulse User Manual Page 50  “” button to finish the security confirmations. Select the newly added FTP connection and click on the  option if it has not already connected by itself. If you can see your files on the right block from the

• D-Link ShareCenter Pulse DNS-320, D-Link ShareCenter Pulse User Manual Page 27 The section allows you to create and manage user accounts and groups. Here you can set user and group privileges for specific shared folders. Up to 64 users and 10 groups can be created. The Network Shares page allows the user to configure shared folders and rights to specific users and groups. This section allows you to assign a quota to a group or user to limit the amount of storage they are allocated. By default, users and groups do not have a quota. This section allows you to configure the settings of the built-in FTP server. This section allows you to

More Instructions:

	D-Link ShareCenter Pulse DNS-320 Technical specifications 09-07-2023 2	DOWNLOAD
	D-Link ShareCenter Pulse DNS-320 Quick installation manual 14-04-2024 28	DOWNLOAD
	D-Link ShareCenter Pulse DNS-320 Quick installation manual 22-12-2022 76	DOWNLOAD
	D-Link ShareCenter Pulse DNS-320 Operation & user’s manual 08-04-2024 118	DOWNLOAD

Related Products and Documents (Storage):

Comparable Devices:

Similar Resources:

• Iomega eGo 34985 (2 pages) Blazing speed to match the fast pace of your digital life!Iomega Protection Suite>> Trend MicroTM(PC/Mac)>> Iomega QuikProtect (PC/Mac)>> Retrospect®Express (PC/Mac)>> MozyHome™ Online (PC/Mac)IOMEGA®SUPERSPEED USB 3.0PORTABLE & DESKTOP HARD DRIVESSPRING 2010www.iomega.comThe NEW Iomega eGo Portable and DesktopHard Drives, Sup …

• Nexstar CB-SATAU3 (1 pages) Compact and Light Design for Easy StorageSupports Hard Drives Up to 2TB*Easily Add or Access Storage Anywhere on Any SystemMaximum Transfer Rates Up to 5 Gbps w/USB 3.0Maximum Transfer Rates Up to 480 Mbps w/USB 2.0Backwards-Compatible with USB 2.0 or 1.1Hi-Quality Shielded USB 3.0 Cable Ensures Data Integrity and SpeedHot-Swappable: Plug & Play Without …

• Seagate GoFlex TV (2 pages) FRTélécommandeESMando a distanciaSeagate FreeAgent GoFlex™ TV HD Media Player Quick Start Guide-PANAMPart Number: 100612572Folded Size: 122mm W x 155mm HTrim Size: 366mm W x 465mm HColors: CMYKKYMCConnect the media player to your TVNOTE: Composite and component cables are included with your media player; an HDMI cable is not. 1. Check the rear of your T …

• ASROCK ALIVENF5-ESATA2 -2943 - (224 pages) 11111ASRock ALiveNF5-eSATA2+ MotherboardEnglishEnglishEnglishEnglishEnglishCopyright Notice:Copyright Notice:Copyright Notice:Copyright Notice:Copyright Notice:No part of this installation guide may be reproduced, transcribed, transmitted, or trans-lated in any language, in any form or by any means, except duplication of documen-tation by the purchaser for …

• Sony HDPS-M10 - Data Storage Wallet (53 pages) © 2005 Sony CorporationHDPS-M10HDD Photo StorageOperating InstructionsBefore operating the unit, please read this document thoroughly, and retain it for future reference.OPENPreparations _______________Copying data to the unit _____Connecting to a computer ____Additional information _______2-639-395-13(1) …

• Seagate MOMENTUS ST9120315AS (48 pages) Product ManualMomentus 5400.6 SATA100528359Rev. ESeptember 2009ST9500325ASST9400326ASST9320325ASST9250315ASST9160314ASST9160301ASST9120315ASST980313ASST9500325ASGST9320325ASGST9250315ASGST9160314ASGST9120315ASGST980313ASG …

Comments, Questions and Opinions: