Manualios.com

D-Link DWL-900AP+ Operation & User’s Manual

  • DWL-900AP+ Wireless Access Point
  • map/jXDowIocg
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 71

D-Link DWL-900AP+ Manual Online:

4.85, 2066 votes
D-Link DWL-900AP+ User Manual
D-Link DWL-900AP+ User Guide
D-Link DWL-900AP+ Online Manual

Text of D-Link DWL-900AP+ User Guide:

  • D-Link DWL-900AP+, Getting Started Setting Up an Infrastructure Network Please remember that D-Link AirPlus wireless devices are pre-configured to connect together, right out of the box, with the default settings. You will need a broadband Internet access (Cable/DSL) subscription. Consult with your Cable/DSL provider for proper installation of the modem. Connect the modem to an Ethernet Broadband Router (such as the D-Link DI-604) See the Quick Installation Guide included wit

  • D-Link DWL-900AP+, 60 Networking Basics Sharing a network printer • Select Browse for a printer • Click Next • Select the printer you would like to share. • Click Next • Click Finish

  • D-Link DWL-900AP+, 24 6. Using the AirPlus AP Manager The AirPlus Access Point Manger is a Windows based program to help you manage multiple Access Points in one easy view. Please note that the AP Manger software is optional. • Begin the installation by inserting the DWL-900AP+ CD into your CD- ROM. The AP Manager is also available for download at support.dlink.com. • Click Install AirPlus AP Manager • The following screen will appear. • Click Next • Click Next • Click Finish to complete installation.

  • D-Link DWL-900AP+, 12 5. Using the Configuration Menu The Configuration Menu for the DWL-900AP+ is web-based. When using the configuration program, please consider the following: Factory Default Settings for the DWL-900AP+ SSID default Channel 6 Encryption disabled User Name admin Password (no password, leave field blank) IP Address 192.168.0.50 You will need a JavaScript-enabled web-browser such as Internet Explorer 4.0 or higher, or Netscape Navigator 4.0 or higher. The computer that you are using for initial configur

  • D-Link DWL-900AP+, Using the Configuration Menu Fig. 5.5 The illustration at right shows the recommended default setting (Disabled) for the DHCP Server function of the DWL-900AP+. If you wish to use the DWL-900AP+ as a DHCP server (not recommended if you already have a DHCP enabled router/gateway on your network) then select Enabled. Enter the IP Address range and click Apply, if you have made any changes. The DWl-900AP+ can be configured to perform in any one of five modes, as a wireless access point

  • 30 Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. • Go to Start • Right-click on My Computer • Click Properties • Select the Hardwa

  • D-Link DWL-900AP+, 56 Networking Basics Adding a local printer • Select and highlight the correct driver for your printer. • Click Next (If the correct driver is not displayed, insert the CD or floppy disk that came with your p r i nter and click Have Disk.) • At this screen, you can change the name of the printer (optional.) • Click Next • Select Yes, to print a test page. A successful printing will confirm that you have chosen the correct driver. • Click Next

  • Networking Basics Checking the IP Address in Windows XP/2000 Type ipconfig /renew at the prompt to get a new IP Address. Press Enter. The new IP Address is shown below. (Windows 98/ME users: go to Start > Run. Type winipcfg at the prompt. The Windows IP Configuration menu will come up. Click Release, then Renew to obtain a new IP Address.)

  • 3. Wireless Basics D-Link AirPlus wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link AirPlus wireless family of products will allow you to securely access the data you want, when and where you want it

  • D-Link DWL-900AP+, 36 Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.

  • D-Link DWL-900AP+, 20 Using the Configuration Menu Fig. 5.10 Tools > System The current system settings can be saved as a file onto the local hard drive by clicking Save. The saved file can be loaded back on the DWL-900AP+ by clicking Browse. When you have selected the settings file, click Load. Click Restore to return to Factory Default Settings. Tools > Firmware Upgrade the firmware for the Access Point. Click on the link to find upgrades to the firmware on the D-Link website at http://support.dlink. com. After you ha

  • D-Link DWL-900AP+, 68 Antenna Type • Detachable Reverse SMA Range • Indoors – up to 328 feet (100 meters) • Outdoors – up to 1,312 feet (400 meters) Temperature • Operating: -10ºC to 55ºC (14ºF to 131ºF) • Storing: -20ºC to 65ºC (-4ºF to 149ºF) Humidity: • 5%-95%, non-condensing Emissions: • FCC part 15b • UL1950-3

  • D-Link DWL-900AP+, Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. Format the disk if you wish, and click Next.

  • D-Link DWL-900AP+, Networking Basics Checking the Wireless Connection by Pinging For Windows Me and 98: Go to Start > Run > type command. A window similar to Fig. 9.26 will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the Wireless Router or Access Point. A good wireless connection will show four replies from the wireless router or access point, as shown. Adding and Sharing Printers in Windows XP After you have run the Network Setup Wizard on all the computers in your network (please see the

  • D-Link DWL-900AP+, 18 Using the Configuration Menu The default Performance settings are shown here. Beacon Interval: Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a Beacon interval value. Default (100) is recommended. RTS Threshold: This value should remain at its default setting of 2,432. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2,432 are recommended. Fragmentation: This value should remain

  • D-Link DWL-900AP+, 8. Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start>Control Panel>Network Connections Select Set up a home or small office network When this screen appears, Click Next.

  • D-Link DWL-900AP+, 64 Networking Basics Sharing an LPR printer • In this screen, select Custom. • Click Settings • Enter the Port Name and the Printer Name or IP Address. • Select LPR • Enter a Queue Name (if your Print-Server/ Gateway has more than one port, you will need a Queue name.) • Click OK

  • Troubleshooting 2. The wireless client cannot access the Internet in the Infrastructure mode. • Make sure the wireless client is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Pleas

  • D-Link DWL-900AP+, Networking Basics Naming your Computer Checking the IP Address in Windows XP/2000 Go to Start > All Programs > Accessories > Command Prompt • In this window, enter the Computer name. • Select Workgroup and enter the name of the Workgroup. • All computers on your network must have the same Workgroup name. • Click OK

  • D-Link DWL-900AP+, 32 Troubleshooting 4. Resetting the DWL-900AP+ to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DWL-900AP+ to the factory default settings. Remember that D-Link AirPlus products network together, out of the box, at the factory default settings. To hard-reset the D-Link AirPlus DWL-900AP+ to Factory Default Settings, please do the following: • Locate the Reset button on the back of the DWL-900AP+ • U

  • D-Link DWL-900AP+, Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next

  • D-Link DWL-900AP+, 40 Networking Basics Naming your Computer To name your computer, please follow these directions: In Windows XP: • Click Start (in the lower left corner of the screen) • Right-click on My Computer • Select Properties and click • Select the Computer Name Tab in the System Properties window. You may enter a Computer description if you wish, this field is optional. To rename the computer and join a domain, • Click Change

  • D-Link DWL-900AP+, network. All devices on a network must use the same SSID to establish communication. Using the Configuration Menu Fig. 5.8 Use MAC Filters to allow or deny wireless connection to the DWL- 900AP+. Select Disable MAC Filters (default) to disable this feature. Select Only allow the MAC address… or Only deny the MAC address… and enter the MAC Address of the selected computer into the field above. Or you can click on the pull-down arrow next to the Connected PCs field, select the compu

  • 10. Contacting Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site, or by phone. D-Link Technical Support over the Tel

  • D-Link DWL-900AP+, Networking Basics Connecting to a Wireless Network Connecting to a Wireless Network with a Wireless Router or an Access Point using a static IP address in Windows XP. Select Use the following IP address - if the Wireless Router or Access Point does not have a DHCP server enabled. Input a static IP address within the same range as the Wireless Router or Access Point. IP address: 192.168.0.51 Subnet mask: 255.255.255.0 Default Gateway: Enter the LAN IP address of the Wireless Router Select Use the following DNS server address. Enter the LAN IP address of the Wireless Router. Click OK Connecting to a Wireless

More Instructions:

DOWNLOAD

Related Products and Documents (Wireless Access Point):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Brother HL-3140CW Quick setup manual brother/hl-3140cw-CF7.pdf 02 Apr 2023 34 3.65 Mb
2 AEG EBUV 880 H Installation and operating instructions manual aeg/ebuv-880-h-Q3V.pdf 18 Jul 2022 12 0.7 Mb
3 Denver MPG-2120PLL Operation & user’s manual denver/mpg-2120pll-IO2.pdf 18 Aug 2023 19
4 Logitech 700N Getting started manual logitech/700n-1B3.pdf 28 Sep 2022 2
5 Sony SmartTags NT3 Operation & user’s manual sony/smarttags-nt3-7D8.pdf 03 Sep 2023 6
6 Sony DCR-IP1 Guia de operaciones sony/dcr-ip1-59Z.pdf 12 Aug 2022 232

Similar Resources:

  • D-Link

    DWL-7700AP

    (20 pages)
    Two Dipole AntennaCheck Your Package ContentsDWL-7700AP Wireless AG Outdoor AP/BridgeCD-ROM (Containing Manual and Warranty)It’s best to use a computer (with an Ethernet adapter) connected to a switch to configurethe DWL-7700AP. The default IP address for the DWL-7700AP is 192.168.0.50 with asubnet mask of 255.255.255.0 on the wired Ethernet side. You will …
  • Alcatel-Lucent

    OmniAccess AP80

    (2 pages)
    The Alcatel-Lucent OmniAccess AP80M is the ideal wireless solution for harsh outdoor environments where conven-tional Wi-Fi access points cannot be deployed. The OmniAccess AP80M is a dual-radio 802.11a/b/g access point thatalso supports wireless air monitoring capability. Designed for extreme, all-weather deployment (such as extreme heat,cold, rain), the Om …
  • Colubris Networks

    CN3300

    (3 pages)
    1 of 342-10-3300-02CN3300 QuickstartThis guide explains how to install and start the CN3300, connect it to the Internet, and test the public access interface. For detailed configuration and operating information download the CN3300 Administrator’s Guide and the Public Access Interface Administrator’s Guide from the Colubris Networks web site at: regis …
  • Niveo Professional

    NWA220

    (23 pages)
    All rights reserved Niveo International BV 2020 User Manual of 11 ac 1200Mbps Outdoor CPE NWA220 This is the user manual of 11ac 1200Mbps Outdoor CPE, which will approximate guide you how to set and apply the NWA 200 Outdoor CPE More information: WWW.NIVEOPROFESSIONAL.COM [email protected]
  • Vonets

    VAP11N

    (5 pages)
    VONETS——VAP11N 150M Mini WIFI Bridge 1 150M Mini WiFi Bridge VAP11N Quick Setting Guide …
  • Extreme Networks

    Altitude 4532 Series

    (63 pages)
    Extreme Networks, Inc.3585 Monroe StreetSanta Clara, California 95051(888) 257-3000(408) 579-2800http://www.extremenetworks.comAltitude™ 4532 Series Access Point Installation GuidePublished: October 2012Part number: 120791-00 Rev 02 …

Comments, Questions and Opinions: