D-Link AirPlus G DP-G301 Manual 

Text of D-Link AirPlus G DP-G301 User Guide:

• D-Link AirPlus G DP-G301, 20 Using the Web Configuration (continued) Configuration > Network TCP/IP This field contains three options that allow you to configure the TCP/IP setting: IP Address: This option allows you to set the IP address manually or automatically. When you choose Manually Assign, you should enter the related information in the following boxes, including IP Address, Subnet Mask, and Default Gateway. UPnP: This option allows you to enable or disable UPnP mode. MAC Rendezvous: This option allows you to enable or disable MAC Rendezvous mode. WEP Encryption: This option allows you to select Disable, 64-bit, and 128-bit for encryption setting. Microsoft Network Enter the name of the Wo

• 72 Networking Basics (continued) Please wait while the Network Setup Wizard ap- plies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.

• D-Link AirPlus G DP-G301, 49 TCP/IP Printing for Windows 98SE/Me (continued) At the Configuration window, write down the Port Name for future reference. You will need this information later in the configuration process. The Port Name shown here is only an example.

• D-Link AirPlus G DP-G301, 77 Networking Basics (continued) How to assign a Name to your Computer  In this window, enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK    How to find your IP Address in Windows XP The computers connected to your network must be in the same IP address range. To verify the IP address, please do the following: Right-click on the Local Area Con- nection icon in the task bar. Click Status  

• D-Link AirPlus G DP-G301, 70 Networking Basics (continued) Please follow all the instructions in this window: Click Next Click Next In this window, select the best description of your computer. If your computer connects to the Internet through a gateway/router, select the second option as shown.

• D-Link AirPlus G DP-G301, 32 TCP/IP Printing for Windows XP (continued) When you select TCP/IP Protocol at the Network window, the screen below appears. (We recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (You may wish to make a note of the IP address.)

• D-Link AirPlus G DP-G301, 88 Appendix: DP-G301 Printer Compatibility List for Windows Other printers from the brands listed above may also be supported. For an updated compatibility list please visit: http://www.support.dlink.com The Other Printer Brother HL-1260 CD T120 Citizen GSX-230 Futek 84+ OKI ML-391 OKIdata OL-400 Olivetti JP450 Pannsonic 2023 Panasonic KX-P1624 Printtec PR856C Star NX-2420 Tektronix Phraser 350 Kyocera FS-1000 Kyocera mita FS-1000+ The HP Printer HP LaserJet III HP LaserJet 4P, 4L, 4V HP LaserJet 5L HP LaserJet 6P, 6L HP LaserJet 1100, 1100A HP LaserJet 1200 HP LaserJet 2100, 2100M HP LaserJet 2200 HP LaserJet 3150 HP LaserColorJet 8500 HP LaserJet 1100 series HP LaserJet 1300 series HP L

• D-Link AirPlus G DP-G301, 71 Networking Basics (continued) Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All comput - ers on your network should have the same Workgroup name. Click Next

• D-Link AirPlus G DP-G301, 64 Setting up Apple Talk or LPR Printing in Mac OS X (continued) Select the printing protocol preferred, AppleTalk or LPR Printers using IP. AppleTalk protocol: After selecting AppleTalk the Port Name of the Print Server will be dis- played. The Port Name shown here is an example only. Click on the Port to which the PostScript printer is connected. In this example, AppleTalk has been selected. PS - 116688-U1 Laserwriter Then select the printer model from the dialog box displayed here. Click Add Printer and the Printer Port configuration is complete. Select the Printer Port just configured in the Print window. Click Print to print y

• D-Link AirPlus G DP-G301, 23 Tools Using the Web Configuration (continued) Print Test Click Test to print a test page. Click on the Tools link from the tools bar of the main screen to enter the Tools Page; it provides the control options that include Print Test , E-mail, Reset, Upgrade, and Backup . Tools > Print Test

• D-Link AirPlus G DP-G301, 65 Setting up Apple Talk or LPR Printing in Mac OS X (continued) LPR Printers using IP protocol: When you select LPR Printers using IP Proto- col, this window will ap- pear. Type the IP Address of the Print Server into the LPR Printer’s Address field. In the Queue Name field, type in the Port Name of the PostScript printer that is connected to the Print Server. The Port Name illustrated here is only an example. Select the printer model from the dialog box. In the Queue Name field, type in the Port Name of the PostScript printer that is connected to the Print Server. The Port Name illustrated here is only an example. Select the printer model from the dialog box.

• D-Link AirPlus G DP-G301, 25 Using the Web Configuration (continued) Tools > Email (continued) E-mail Notification You can set the print server to send a message through E-mail when the printer status changes. To enable this function, set the Enable e-mail notification for printer status changing option to Yes. Then, input the administrator’s Email address in the Admin E-mail Address box. E-mail Printing E-mail Printing (ASCII Text Only): Select Enable to enable the E-mail printing function. Receive E-mail Interval: Enter the number in this box to set up the time (in minutes) to check/receive E-mail regularly. Test E-ma

• D-Link AirPlus G DP-G301, 10 Immediately after power-up, three of the green LEDs should illuminate steadily for several seconds. Irregularity of the LED during this LED test may mean there is a problem with the LED itself. The actual component tests immediately follow the LED tests. A normal (no fault) result is signaled by a flashing of the LPT LED, followed by a darkened LED. If the Self-Test routine detects any component error, then following the LED tests the Self-Test will halt and the LEDs will continuously signal the error according to the following table. When the DP-G301 is powered , it also automatically performs a Self-Test o

• D-Link AirPlus G DP-G301, 87 The Canon Printer Canon BJC-255SP Canon BJ-330 Canon BJC-600, 620 Canon BJC-2000SP Canon BJC-4100 Canon BJC- 4300 Canon BJC- 4500 Canon BJC- 4550 Canon BJC-6000 Canon BJC- 6500 Canon BJC-7000 Canon BJC-8200 Canon LBP-720 Canon BJC-740 Canon Bubble Jet S520 The Epson Printer Epson Stylus Photo 700, 710, 750 Epson Stylus Photo 870 Epson Stylus Photo 1200, 1270 Epson Stylus Photo EX Epson Stylus Pro XL Epson Stylus Color 400, 440, 460, 480 Epson Stylus Color 600, 640, 660 Epson Stylus Color 740 Epson Stylus Color 8

• 9 Setting up the DP-G301 Installing the Print Server WARNING: Configuration problems may result if the Print Server is powered up without first establishing its network connection. Follow this procedure to avoid complications at the configuration stage. Confirm proper operation of your printer before connecting the DP-G301. 1. When you have confirmed proper operation of

• D-Link AirPlus G DP-G301, 24 Using the Web Configuration (continued) Tools > Email You can assign an E-mail address to the print server, so that the mail from the account can be printed out directly through the printer (ASCII test only). To enable this function, enter the E-mail account in the Print Server E-mail Address box. Incoming E-mail (POP3) Server Address: Enter the server address that is used to receive your E-mail in this box. Outgoing E-mail (SMTP) Server Address: Enter the server address that is used to send your E-mail in this box. E-mail Account If your mail server needs to

• 31 TCP/IP Printing for Windows XP (continued) Select your Connection Mode Enter the SSID of the remote access point or wireless router you wish to connect to. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply

• D-Link AirPlus G DP-G301, 83 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO. Limited Warranty: D-Link warrants that the h

• D-Link AirPlus G DP-G301, 85 Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the propert

• 7 D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking bring

• D-Link AirPlus G DP-G301, 28 Using the Web Configuration (continued) Help Click on the Help link from the tools bar of the main screen to enter the Help Page. It provides a link to D-Link’s support web site. D-Link’s support web site will provide the most up to date information on your DP-G301 Print Server. Please check the web site regularly for product and firmware updates.

• D-Link AirPlus G DP-G301, 17 Using the Web Configuration (continued) Configuration > System Device and Port Setting Server Name: Assign a name to the print server. Location (optional): Assign a location for the print server. Admin contact (optional): Assign the Admin’s contact name for the print server. Port Settings In this field, you can assign the Port Name for the print server, and the description for the parallel port. It also allows you to select the PJL Printer setting (Yes or System Device In this field, you can configure the basic information of your print server. Password: Enter the Administrator passwo

• D-Link AirPlus G DP-G301, 78 Networking Basics (continued) How to find your IP Address in Windows XP This window will appear. Click the Support tab Click Close   Assigning a Static IP Address in Windows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses. If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions:   Go to Start Double-click Control Panel

• 61 Setting up Apple Talk or LPR Print- ing in Mac OS X At the Configure pull-down menu, select Manually. Open your Sys - tem Preferences window and Click Network. With Mac OSX you can use AppleTalk or LPR printers using IP protocols for print - ing through Print Servers. Follow the instructions below for setting up the Print After attaching the Print Server to your network using the

Related Products and Documents (Print Server):

Comparable Devices:

Similar Resources:

• ZyXEL Communications NPS-520 (115 pages) NPS-520MFP Print Server Quick Start GuideVersion 1.00 Edition 111/2006 Copyright © 2006. All rights reserved.Table of ContentsENGLISH 1 DEUTSCH 17 ESPAÑOL 33 FRANÇAIS 49 ITALIANO 65 РУССКИЙ 81 SVENSKA 99 …

• Brother MFC490CW - Color Inkjet - All-in-One (5 pages) Wireless Setup Instructions for Windows 1 © 1995 - 2010 Brother International Corporation www.brother-usa.com Connecting the Brother machine to the wireless network Configure the wireless settings (Typical Wireless Setup in infrastructure mode) 1. On your machine, press Menu. Press ▲ or ▼ to choose Network and press OK. Press ▲ or ▼ to choose WLA …

• LevelOne WPS-1133 (2 pages) Print ServerPrint ServerPrint ServerPrint Server WPSWPSWPSWPS----1133113311331133 one world_one brand_one level_ Digital Data Communications GmbH. Zeche-Norm St. 25, 44319, Dortmund, Germany All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice. …

• SEH ISD300 (66 pages) ISD300 User ManualISD300User ManualVersion 1.0Manufactured bySEH Computertechnik GmbHSuedring 1133647 BielefeldGermanyPhone: +49 (0)521 94226-29Fax: +49 (0)521 94226-99Support: +49 (0)521 94226-44Email: [email protected]: http://www.seh.de© 2005 SEH Computertechnik GmbHAll trademarks, registered trademarks, logos and product names areproperty of the respective …

• SEH PS104 (24 pages) Hardware Installation Guide 1 OverviewThis Hardware Installation Guide provides a brief description of the hardwareinstallation of the print server. It contains the following information: Scope of Supply  Safety Regulations Print Server Controls and Technical Data Mounting the Print Server Noti …

• Brother MFC-5490CN (439 pages) ConfidentialInkjet MFCSERVICE MANUALMODEL: MFC5490CNJuly 2008SM-FAX0968CAH11(1)Read this manual thoroughly before maintenance work.Keep this manual in a convenient place for quick and easy reference at all times. …

Comments, Questions and Opinions: