Manualios.com

D-Link DCS 5300 - Network Camera Operation & User’s Manual

  • DCS 5300 - Network Camera Webcam
  • map/jXDowIocg
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 143

D-Link DCS 5300 - Network Camera Manual Online:

3.35, 1325 votes
D-Link DCS 5300 - Network Camera User Manual
D-Link DCS 5300 - Network Camera User Guide
D-Link DCS 5300 - Network Camera Online Manual

Text of D-Link DCS 5300 - Network Camera User Guide:

  • D-Link DCS 5300 - Network Camera, 12 The InstallShield will install in the following folder. To install into a different folder, click Browse and select another folder. Click Next. Select the Program folder that Setup will add program icons to. You may type a new folder name, or select one from the existing folders list. Click Next. Please wait while the Installation Wizard is installed. Installation Wizard (continued)

  • 40 Configuration > Advanced >Network (continued) Using the DCS-5300 with an Internet browser (continued) SMTP(mail) server 2 - The domain name or IP address of a secondary mail server used only if the primary mail server is unreachable. The e-mail address of recipients for the secondary server. The return e-mail address to use if the snapshot or system log e-mail fails to send. (This

  • D-Link DCS 5300 - Network Camera, 109 Using IP surveillance Software (continued) Playback Program (continued) Playback method Display adjustment tool When you successfully log in to the playback system, the main window will be shown on the top of the screen and the display resolution will be changed to 1024x768 automatically (see previous page). There are four main areas , i.e. display area, histogram area, control area, and status area. There are also three visualized controls , i.e. area selection indicator, frame selection indicator, and pull bar. These features provide much more convenience while searching recorded video in the IP surveillance database. Main Areas Display Area The display area is able to show the sur

  • D-Link DCS 5300 - Network Camera, 44 Enable DDNS - Click to enable the DDNS function. Provider- Select your Dynamic DNS provider from the pull down menu. Host name- Enter the host name of the DDNS server. Username/E-mail- Password/Key- Enter your password or key used to connect to the DDNS server. Using the DCS-5300 with an Internet browser (continued) Configuration > Advanced > DDNS & UPnP (Continued) Enter your username or e-mail used to connect to the DDNS server. UPnP UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equip

  • D-Link DCS 5300 - Network Camera, 137 Contacting Technical Support TT TT T echniechni echniechni echni cal Supportcal Support cal Supportcal Support cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:[email protected] Tec

  • D-Link DCS 5300 - Network Camera, 64 1st FTP password- Specify the password to access the external FTP server (ex. 12345). 1st FTP remote folder- Specify the destination folder in the external FTP server (ex. snapshot). Primary FTP passive mode- Passive mode will allow access to an external FTP server if your camera is behind a router protected by a firewall. 2nd FTP server- Specify the Domain name or IP address of your second external FTP server. This field is optional if you have already filled in the information for the first FTP server. 2nd FTP user name- Specify the user name to acce

  • 142 Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or ad

  • D-Link DCS 5300 - Network Camera, 123 Schedule Video Recording with Motion Detection (continued) In the Primary Schedule you can choose either Once (for one time recording) or Every Day (for scheduled recording). For example, if you would like to record events every day during a certain time frame, click on the beginning time and drag your mouse to the ending time. Schedule recording can be configured by minutes, hours, days, weeks, or months. The Secondary Schedule allows you to set a schedule outside the Primary Schedule. The Secondary Schedule provides two options to record without a specified date or time. You can select Event Mode,

  • D-Link DCS 5300 - Network Camera, 133 Configuring Your Camera for External Trigger Based Recording (continued) I/O Connector (continued) Next, click the Applications button under the Tools tab to set the application settings for the DCS-5300. In this window, follow the steps below to set the application settings for snapshots to be sent to your email account or FTP server when triggered by a motion sensor or other external device:    Select the weekdays you would like to record and enter the “Snapshots begin” time and “Snapshots end” time for the weekly schedule, or select “All the time except for the above sch

  • D-Link DCS 5300 - Network Camera, 2 Contents of Package.......................................................................................3 Introduction ......................................................................................................4 Features and Benefits .....................................................................................4 Connections ....................................................................................................6 Hardware Installation ................................................

  • D-Link DCS 5300 - Network Camera, 128 How to PING Your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It can also provide a very useful tool to confirm if the IP address conflicts with Internet Camera over the network. Follow the step-by-step procedure below to utilize the PING command but first you must disconnect Internet Camera from the network. Start a DOS window. Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet Camera. The replies, as illustrated below, will help diagnose any connection problems. Frequently Asked Questions (continued)

  • D-Link DCS 5300 - Network Camera, 89 Using IP surveillance Software (continued) Monitor Program (continued) Step 2: Press and hold the left mouse button, and then move the cursor to a display window in the video area, which is shown below. Note that the cursor will change according to the area in order to indicate whether the area is droppable or not. Video 1 Droppable area Not droppable area Step 3: Release the left mouse button while on top of a display window. In each display layout, only one window can be assigned to a camera. Also, each camera must have i

  • 13 Installation is now complete. Installation Wizard (continued) IMPORTANT: A hardware reset of the Internet Camera may be required if the Installation Wizard cannot find the camera. To accomplish this reset, lightly insert a paper clip (or a similar sized tool) into the reset hole on the back of the camera (see page 6 for the location of the reset hole). The LED on th

  • 126 Q: Can the Internet Camera be setup as a PC-cam on a computer? A: No, the Internet Camera is used only on an Ethernet or Fast Ethernet network. The D-Link DSB-C110, DSB-C310, can be used as a PC Camera (Webcam). Q: Can the Internet Camera be connected to the network if it consists of only private IP addresses? A: The Internet Camera can be connected to a LAN with

  • D-Link DCS 5300 - Network Camera, 83 Using IP surveillance Software (continued) Global Settings After completing the connection for each remote Network Camera, we need to configure some global settings for all the cameras. These include the video database directory, the usage of the Hard disk, and options for video display. You can activate the global settings window from “Configuration Menu > Global Settings...” shown above. All recording processes will be stopped when activating the global settings window, indicated by a warning window popped up in advance to keep you informed. Monitor Program (continued)

  • D-Link DCS 5300 - Network Camera, 61 Click on the Help tab to access descriptions of the particular function you need help with. The help screen is organized in the order of the tabs and then each menu item under that tab. Configuration > Help Using the DCS-5300 with an Internet browser (continued)

  • D-Link DCS 5300 - Network Camera, 10 Installation Wizard After you have successfully completed the hardware installation of the DCS- 5300 Internet Camera, it is necessary to install software to configure and operate the camera. The first step is to install the Installation Wizard program from the CD. Installation Wizard will allow you to configure the Internet Camera to your network. After the Installation Wizard software program is completed, you will have an operating and controllable Internet Camera. From your Internet Explorer Web browser you will be able to

  • D-Link DCS 5300 - Network Camera, 17 Installation Wizard Screen (continued) Reset to Default - About - Exit - Click the Exit tab to exit the Installation Wizard screen. Click About to display the current version and date. Click the Reset to Default tab to reset the camera’s settings to factory defaults. Locate the Firmware to Upgrade - Indicate the location of the firmware to be uploaded to the camera. Selected Package - This displays the file name of the firmware selected for upload.

  • D-Link DCS 5300 - Network Camera, 117 Playback Program (continued) Using IP surveillance Software (continued) Play The supported “Play” button is an intelligent play user-interface. The functionality of this button can vary to fit different circumstances. In the normal display mode, clicking on the “Play” button can restart the displaying video sequence. Forward This button is only valid when the displaying video sequence is paused. It will display the next frame in that period when you click on the “Forward” button one time. Speed Indica

  • D-Link DCS 5300 - Network Camera, 29 Using & Configuring the DCS-5300 with a NAT Router (continued)      View the Internet Camera using your Internet Explorer Web browser Viewing the Video on the browser to test the connection Click on the Configuration button on the left side of the display. Scroll to the bottom of the Network Configuration page to display the ports used by HTTP and Streaming audio and video. Run your Internet Explorer Web browser. In the address bar, type in the IP Address that was assigned to the Internet C

  • D-Link DCS 5300 - Network Camera, 98 Using IP surveillance Software (continued) Record By clicking on this button, you can record video of the selected channel manually. Printer Click on the printer icon to print the current image to your default printer. Trashcan You can drag and drop the video channel to the Trashcan to close the video connection with the DCS-5300. Status Bar Local time Current login user Login time Software version Software name Monitor Program (continued) Stop After video recording has been activated, this button allows you to manually stop recording of the selected video channel. Snapshot This button will take a snapshot of the selected v

  • D-Link DCS 5300 - Network Camera, 107 Using IP surveillance Software (continued) Playback Program The playback program is a very powerful, convenient, and easy way to browse the recorded video. It has one display mode (normal display mode) and two playback methods (full range and time period). There are several main functions including special features in the Playback program. These functions are depicted as follows. Powerful play control tool: Play Stop Pause Step forward Fast play (from x1 to x16) Slow play (from /1 to /16)                   Convenient display adjust

  • D-Link DCS 5300 - Network Camera, 4 Introduction Motorized Pan and Tilt Operation The DCS-5300 has a pan and tilt function that can expand your viewing area to cover a wide 270 o angle side-to-side and a 90 o angle up and down. This can be controlled with a PC from any location or locally using the included infrared remote control. The SECURICAM Network TM DCS-5300 Internet Camera is a full featured surveillance system that connects to an Ethernet, Fast Ethernet or broadband Internet connection to provide remote high-quality audio and 4x digital zoom 1 . The DCS-5300 is the latest product added to the D-Lin

  • D-Link DCS 5300 - Network Camera, 67 Using IP surveillance Software (continued) The “License Agreement” window below will appear. Please read the following license agreement carefully. Click “Yes” to accept this agreement and proceed with the installation. Click Next Click Yes Installing the IP surveillance software (continued)

  • 55 Configuration > Tools > System Manual - Adjust the date and time according to what is entered by the administrator. Notice the format in the related field while typing. Automatic - Synchronize with the NTP server over the Internet whenever the DCS-5300 starts up. It will fail if the assigned timeserver cannot be reached. NTP server - Assign the IP address or domai

Related Products and Documents (Webcam):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Pendo PNDPP41K7SLV Quick start manual & user manual pendo/pndpp41k7slv-15J.pdf 10 Mar 2023 39
2 Electrolux ESTM9804S Instruction manual electrolux/estm9804s-9FF.pdf 16 Apr 2023 40
3 Sony VENICE MPC-3610 Operating instructions manual sony/venice-mpc-3610-2BE.pdf 30 Nov 2022 92
4 Mackenzie M3 Operation & user’s manual mackenzie/m3-291.pdf 09 Jul 2023 24
5 Greenway Home Products MEF2021WL Assembly instructions greenway-home-products/mef2021wl-X17.pdf 15 Dec 2023 5 0.85 Mb
6 Jet JSJ-10T Operating instructions and parts manual jet/jsj-10t-HM5.pdf 19 Mar 2023 16

Similar Resources:

  • Steren

    COM-110

    (2 pages)
    Product / Producto: USB WEBCAM / CÁMARA WEB USBModel / Modelo: COM-110Brand / Marca: SterenCONDICIONES1. Para hacer efectiva esta garantía se requiere: La presentación de esta póliza y del producto, en el lugar en donde fue adquirido o en ELECTRONICA STEREN S.A. DE C.V.2. ELECTRONICA STEREN S.A. DE C.V. se compromete a reparar el producto en caso de es …
  • Polycom

    3725-22724-003/A

    (12 pages)
    July 20063725-22724-003/AConfiguring Video and Audio Devices for Use with Polycom PVXYou can select from a number of different audio and video input devices to use with your Polycom® PVX™ application, version 8.0.1 or later. This document lists the advantages and disadvantages of various devices so you can choose the correct one for your environment. It a …
  • Huawei

    TE30

    (15 pages)
    1 Copyright © Huawei Technologies Co., Ltd.2014. All rights reserved.  What's in the Box TE30 Power adapter (1) and power cable (1) Network cable (1, 3 m) L-shaped bracket (1) and hook-and-loop fastener (1) Accessorial integration cable (1, 2 m) HDMI cable (1, 0.2 m)  L-shaped bracket: secures the TE30 during mounting.  Hook-and-lo …
  • Genius

    LOOK 110

    (72 pages)
    English i Table of Contents Look 110 Features 1 Installing the Look 110 2-3 About Genius Application-WebCAM Mate 4 1. Main Menu 5-10 2. Picture Mode 11-13 3. Video Mode 14-16 4. Security Mode 14-18 Using MSN Messenger,Yahoo Messenger,AOL 18-20 CrazyTalk Avatar Creator 20-42 CrazyTalk CamSuite 43-70 Trouble shooting for web camera 71 …
  • Avaya

    CU-360

    (2 pages)
    Avaya IX Collaboration Unit CU360QUICK TIPSavaya.comVideo enable your meeting spaceRestricted modePower over EthernetAn advanced settings in the Security section allows locking the CU360 in “restricted mode”. When the system is in “restricted mode”, Android features are locked, and the device acts in “kiosk mode”, as pure videoconferencing device …
  • Lorex

    DMC2030 Series

    (25 pages)
    www.lorexcctv.comLorex Technology Inc.300 Alden Road, Markham, Ontario, Canada L3R 4C1 Lorex Corporation.3700 Koppers Street, Suite 504, Baltimore, Maryland, 21227 …

Comments, Questions and Opinions: