D-Link DP-101P+ Operation & User’s Manual
|
D-Link DP-101P+, 28 TCP/IP Printing for Windows XP (continued) Type in the IP address of the print server. (i.e. 192.168.0.10). The port name will automatically be filled in Select Standard. Make sure that Generic Network Card is highlighted Click Next Click Finish
D-Link DP-101P+, 14 TCP/IP Printing for Windows 98/Me (continued) At this window, click Have Disk 1. Insert the DP-101P+ CD-ROM into your CD-ROM drive. Select the letter representing the CD-ROM drive on your computer from the pull-down menu 2. Double-click on the folder lpr 3. Highlight lpr.inf 4. Click OK Click OK to accept the location of the file
D-Link DP-101P+, 35 Configuration > NetBEUI Protocol Click on “NetBEUI Protocol” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. Click the “Save” button to ensure that the settings are saved and updated. Configuration > AppleTalk Protocol Click on “AppleTalk Protocol” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. Click the “Save” button to ensure the settings are saved and updated.
D-Link DP-101P+, 9 Component Test Series (continued) In the event of a Firmware Reload Required error at startup, proceed according to instructions given in the PS Admin User’s Guide (“PS Admin Administration” section, under the heading “Upgrading the Print Server’s Internal Firmware”). In the event that any of the other listed error conditions is encountered on startup, contact your dealer for correction of the fault. OperOper OperOper Oper aa aa a tional tional tional tional tional TT TT T estest estest est The PS Admin software includes a Print Test function for confirmation of connect
D-Link DP-101P+, 52 12. Contacting Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site, or by phone. D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Su
D-Link DP-101P+, 45 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wi
D-Link DP-101P+, 43 Networking Basics In the window below, select the best option. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Insert a disk into the Floppy Disk Drive, in this case drive A. Click Next Format the disk if you wish, and click Next Click Next
D-Link DP-101P+, 53 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: · D-Link or its authorized reseller or distributor and · Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with
D-Link DP-101P+, 18 Once your computer has rebooted, click on Start>Settings>Printers>Add Printer When the Add Printer Wizard screen appears click on Next Select Network Printer and click on Next Type in the path if you know it or click on Browse
D-Link DP-101P+, 46 Networking Basics Naming your Computer To name your computer, please follow these directions: In Windows XP: • Click Start (in the lower left corner of the screen) • Right-click on My Computer • Select Properties and click • Select the Computer Name Tab in the System Properties window. You may enter Computer Description if you wish, this field is optional. To rename the computer and join the domain, • Click Change
D-Link DP-101P+, 5 The DP-101P+ offers extraordinary flexibility, operating with all major network operating systems and protocols: TCP/IP UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) Windows NT/2000, Windows XP, Windows 98/Me NetWare 5.x NDPS LPR remote printing NetBEUI Windows XP, Windows NT/2000, Windows 98/Me, Windows for Workgroups, Microsoft LAN Manager, IBM LAN Server AppleTalk MacOS AppleTalk The D-Link DP-101+ has an embedded web-server which allows
30 TCP/IP Printing for Windows XP (continued) 8. Mac OS and Unix/Linux Printing8. Mac OS and Unix/Linux Printing 8. Mac OS and Unix/Linux Printing8. Mac OS and Unix/Linux Printing 8. Mac OS and Unix/Linux Printing Please refer to the PS Admin manual for setting up the pr
D-Link DP-101P+, 10 5.5. 5.5. 5. TT TT T CP/IP Printing fCP/IP Printing f CP/IP Printing fCP/IP Printing f CP/IP Printing f or or or or or WW WW W indoindo indoindo indo ws 98/Mews 98/Me ws 98/Mews 98/Me ws 98/Me Open the web browser, and type in the IP Address of the DP-101P+. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key Note: The PC’s IP address must be in the same network with
D-Link DP-101P+, 16 TCP/IP Printing for Windows 98/Me (continued) Port name and IP address will be displayed Click OK Type in the IP address of the DP-101P+. Make sure the Port Name is accurate. The Port Name at right is just an example. (Please refer to page 13 in this manual to find the Port Name in the Server Device window.) Click OK Click Add Port
D-Link DP-101P+, 29 TCP/IP Printing for Windows XP (continued) In this window, scroll down to find your printer, (If it is not listed, insert the driver CD or diskette that came with your printer and click on Have Disk to install the printer drivers At this screen, you can input a name for the printer Click Next Click Next
D-Link DP-101P+, 33 ConfigurationConfiguration ConfigurationConfiguration Configuration Click on “Configuration” in the systems tool bar to show the Configuration Table. It provides settings to configure the print server to print using TCP/IP Protocol, NetBEUI Protocol and AppleTalk Protocol. Configuration > Server Device Click on “Server Device” in the Configuration Table. The page will appear as below providing the s
D-Link DP-101P+, 34 Configuration > TCP/IP Protocol Click on “TCP/IP Protocol” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. Click the “Save” button to ensure the settings are saved and updated. IP Address Assignment: Manually assign: Select this option to enter a specific IP Address to the print server. Enter the IP Address in the above fields. Assign Automatically Using: Select one of the three protoc
DOWNLOAD |
D-Link KVM-440 Switch Operation & user’s manual
KVM-440 |
D-Link DGS-3048 - Switch Switch Product manual
DGS-3048 - Switch |
D-Link DES-3010G Switch Command line interface reference manual
DES-3010G |
D-Link DSB-650TX Switch Reference manual
DSB-650TX |
D-Link xStack Switch Reference manual
xStack |
D-Link DES-1228 - Web Smart Switch Switch Operation & user’s manual
DES-1228 - Web Smart Switch |
D-Link DES-3205 Switch Hardware installation manual
DES-3205 |
D-Link DSS 8 - Plus Switch Switch Manual
DSS 8 - Plus Switch |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | LAMBORGHINI | FAST 30 C - SCHEMA | Manual | lamborghini/fast-30-c-schema-J49.pdf | 14 Jan 2023 | 1 | |
2 | Martin | DC3700 | Instruction manual | martin/dc3700-T71.pdf | 02 Sep 2022 | 24 | |
3 | Craftsman | BRUSHWACKER 358.798260-32cc | Operator's manual | craftsman/brushwacker-358-798260-32cc-4UV.pdf | 13 Jan 2024 | 61 | 8.2 Mb |
4 | Sonifex | CM-CU21 | User handbook manual | sonifex/cm-cu21-H94.pdf | 23 Dec 2023 | 32 | 2.08 Mb |
5 | Haier | MW4255 | Istruzioni per i'uso | haier/mw4255-N23.pdf | 01 Feb 2023 | 6 | 1.39 Mb |
6 | Philips | 37PFL5322D | Specifications | philips/37pfl5322d-4RC.pdf | 14 Mar 2024 | 3 |
LEGRAND
LIMITED FIVE YEAR WARRANTYPass & Seymour/Legrand will remedy any defect in workmanship or material in Pass & Seymour/Legrandproducts which may develop under proper and normal use within five years from the date of purchase by aconsumer:(1) by repair or replacement, or, at Pass & Seymour/Legrand’s option, (2) by return of an amount equal to thec …
Pass & Seymour TM8LOCATOR-LA(2 pages) |
Endress+Hauser
TI392F/00/enTechnical InformationSoliphant M FTM50, FTM51, FTM52Level limit switchUniversal vibration limit switch for fine-grained bulk solids, also for explosion-hazardous areasApplicationSoliphant M is a robust level limit switch for use in silos containing fine-grained or powdery solids even with a low bulk density.The various designs mean the device has …
Soliphant M FTM50(32 pages) |
D-Link
5/8-PORT GIGABIT SWITCHDGS-1005D/DGS-1008DQUICK INSTALLATION GUIDEINSTALLATIONSANLEITUNGGUIDE D’INSTALLATIONGUÍA DE INSTALACIÓNGUIDA DI INSTALLAZIONEINSTALLATIEHANDLEIDINGINSTRUKCJA INSTALACJIINSTALLASJONSVEILEDNINGINSTALLATIONSVEJLEDNI …
DGS-1005D - Switch(56 pages) |
axing
HerstellerAXING AG Gewerbehaus Moskau 8262 RamsenEWR-KontaktadresseBechler GmbHAm Rebberg 44 78239 RielasingenStand 2018-10-08Technische Verbesserungen, Änderungen im Design, Druckfehler und Irrtümer vorbehalten.Sicherheitshinweise: Die Installation des Geräts und Reparaturen am Gerät sind ausschließlich vom Fachmann unter Beachtung der geltenden VD …
basic-line SPU 84-01(4 pages) |
Embertec
FrequentlyAsked QuestionsContentsWhy choose Embertec? ............................................................................... 2What does standby power wastage mean? ......................................... 2What is active power wastage? ................................................................. 2What are the benets of the Embertec Smart …
SmartSwitch Series(5 pages) |
ABB
0173-1-7396 28.04.2011 0173-1-7396 ABB i-bus® KNX Taster-Ankopplung 1/2-fach 6108/01-500 2/4-fach 6108/02-500 Pos: 1 /Mehrsprachig -- 35x28/35/Ar t und Sprache der Doku/Mont ageanleitung / Bedi enungsanleitung/ Montageanleitung / Bedienungsanleitung ger- eng-fre-dut @ 13\mod_1 286263269721_1.doc @ 91426 @ @ 1 GER Montageanleitung / Bed …
i-bus KNX 6108/02-500(2 pages) |
Nikon Camera Lens Reflex-Nikkor 500mm f/8#7PYJJJ: Reflex-Nikkor 500mm f/8 Camera Lens Instruction manual Reflex-Nikkor 500mm f/8, 30 |
Sanyo Printer DVP-P1EXSanyo DVP-P1EX Guide (Instruction manual), @4986FM DVP-P1EX, 56 |
Dell Server 735NDell Server Supplementary manual (File: dell-735n-supplementary-manual-3, 25th Nov 2023) 735N, 3 |
Dimplex Electronic Keyboard SAHARA FIREPLACE 6903950000Electronic Keyboard #6SB363 SAHARA FIREPLACE 6903950000, 20 |
Fondital Heater desertus fa seriesPDF User Manual (@9ZXJ16), Fondital desertus fa series Heater (07.01.2024) desertus fa series, 12 |
ProForm Home Gym 975S PFEX97571#M8D886 975S PFEX97571: ProForm Home Gym Owner Documentation 975S PFEX97571, 8 |
XYZ Printing 3D Printers da Vinci 1.0 Pro 3in1XYZ Printing da Vinci 1.0 Pro 3in1 User Manual (Doc Type: 3D Printers Operation & user’s manual) da Vinci 1.0 Pro 3in1, 28 |
Acer Laptop TravelMate Notebook SeriesLaptop #H7HN6X TravelMate Notebook Series, 2286 |
Motorola Cell Phone ATRIXPDF User Guide (@6497B2), Motorola ATRIX Cell Phone (21st Nov 2023) ATRIX, 2 |
Singer Sewing Machine 15-11Sewing Machine #NZPB3T 15-11, 9 |
Bromic Heating Electric Heater Tungsten 2000wTungsten 2000w Installation, instruction and service manual - D9895V Tungsten 2000w, 14 |
ParaBody Home Gym PBF351ParaBody Product Manual: PBF351 PDF Assembly instructions manual - N9FXM7 PBF351, 12 |