D-Link DWL-2100AP - AirPlus Xtreme G Manual
|
D-Link DWL-2100AP - AirPlus Xtreme G, 6DWL-2100AP User Manual Features and Benefits Faster Wireless Networking Able to achieve a maximum wireless signal rate of up to 108Mbps*, increased speeds means increased productivity. With the DWL-2100AP in your home or business, colleagues, friends, or family can communicate with one another in real-time to download large files or to smoothly stream MPEG videos. The DWL-2100AP Wireless Access Point gives you the freedom of wireless networking at D-Link 108G speeds that save you time, money, and make your wireless networking experience more enjoyable. SNMP Management The DWL-2100AP is
D-Link DWL-2100AP - AirPlus Xtreme G, 85DWL-2100AP User Manual Enter a Computer description and a Computer name (optional). Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next.
D-Link DWL-2100AP - AirPlus Xtreme G, 5DWL-2100AP User Manual Introduction D-Link ® , the industry pioneer in wireless networking, introduces a performance breakthrough in wireless connectivity – D-Link AirPlus Xtreme G TM series of high-speed devices now capable of delivering transfer rates up to 15x faster than the standard 802.11b with the new D-Link 108G. With the new AirPlus Xtreme G DWL-2100AP Wireless Access Point, D-Link sets a new standard for wireless access points. With the D-Link 108G enhancement, the DWL-2100AP can achieve wireless speeds up to 108Mbps* in a pure D-Link 108G
20DWL-2100AP User Manual WDS with AP (WEP) Select Disabled or Enabled. (Disabled is selected here). Select HEX or ASCII. Select 64-bit, 128-bit, or 152 bits. Select the 1st through the 4th key to be the active key. Input up to four keys for encryption. You will select one of these keys in the valid key field. Encryption: Key Type: Key Size: Valid Key: First through Fourth keys: * Hexadecimal
D-Link DWL-2100AP - AirPlus Xtreme G, 79DWL-2100AP User Manual Enter the SSID and the Channel for the IEEE network. Auto Channel Scan is enabled by default. The access point will scan for the best available channel. Click Next. If you want to enable Encryption, enter the Encryption values here. Click Next.
D-Link DWL-2100AP - AirPlus Xtreme G, 17DWL-2100AP User Manual When you select WPA-PSK, WPA2-PSK, or WPA-Auto-PSK, you must select AUTO, AES, or TKIP from the pull-down menu. Select the interval during which the group key will be valid. The default value of 1800 is reommended. Enter a passphrase. The passphrase is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. Cipher Type: Group Key Update Interval: PassPhrase: A
63DWL-2100AP User Manual WPA-PSK/WPA2-PSK/WPA-Auto-EAP Select the interval during which the group key will be valid. 1800 is the recommended setting. A lower interval may reduce transfer rates. Cipher Type: Select Auto, TKIP, or AES from the pulldown menu. Group Key Update Interval: Enter a PassPhrase between 8-63 characters in length. PassPhrase:
D-Link DWL-2100AP - AirPlus Xtreme G, 105DWL-2100AP User Manual Technical Specifications Standards • IEEE 802.11b • IEEE 802.11g • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x Network Management • Web Browser interface • AP Manager • SNMP v.3 • Telnet Data Rate* For 802.11b: • 11, 5.5, 2, and1Mbps For 802.11g: • 108, 54, 48, 36, 24, 18, 12, 9 and 6Mbps Security • 64/128/152-bit WEP • WPA (Wi-Fi Protected Access) - TKIP/AES/PSK • MAC Address Access Control List Wireless Frequency Range • 2.4GHz to 2.4835GHz Radio and Modulation Type For 802.11b: DSSS: • DBPSK @ 1Mbps • DQPSK @ 2Mbps • CCK @ 5.5 and 11Mbps For 802.11g: OFDM: �
D-Link DWL-2100AP - AirPlus Xtreme G, 42DWL-2100AP User Manual Admin Settings Limit Administrator IP: User Name: Old Password: New Password: Console Protocol: Timeout: Status: Public Community String: Private Community String: Check the box to limit the administrator to login to the DWL-2100AP from a certain IP address. Enter a user name. The default setting is admin. Enter the current password (blank by default). Enter a new password and enter it again in the Confirm Password box. Telnet is the default setting. Select None to disable. Select a time period after which the connection will terminate. Check Enabled to use SNMP. S
D-Link DWL-2100AP - AirPlus Xtreme G, 72DWL-2100AP User Manual Check this box to enable logging. Enter the IP address of the Syslog server. Select Enable or Disable from the drop-down menus. There are 3 types: System Activity, Wireless Activity, and Notice. Remote Syslog Status: Activity: Remote Syslog Status Server IP: Log
60DWL-2100AP User Manual Security The Security tab contains the WEP configuration settings on the intial page. If you select WPA as the authentication type, an additional tab will appear with the WPA configuration options based on your selection. The key is communicated across the network. Open: Shared: Open System/ Shared Key: WPA: WPA-PSK: Limited to communication with de
D-Link DWL-2100AP - AirPlus Xtreme G, 38DWL-2100AP User Manual The Range of Pool (1-255): SubMask: Gateway: Wins: DNS: Domain Name: Lease Time (60-31536000 sec.): Status: Enter the number of IP addresses available for assignment. All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here. Enter the IP address of the gateway on the network. Windows Internet Naming Service is a system that determines the IP address of a network computer that has a dynamically assigned IP address. Enter the IP address of the DNS server. The DNS (Do
D-Link DWL-2100AP - AirPlus Xtreme G, 50DWL-2100AP User Manual System Log The log information will include, but not limited to, the following items: • Upgrade Firmware • Client association with AP • Web login Log Server/IP Address: Log Type: Enter the IP address of the log server. Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice.
D-Link DWL-2100AP - AirPlus Xtreme G, 28DWL-2100AP User Manual AP Client IEEE 802.11g is selected here. Select AP Client from the drop-down menu. Select Enable to broadcast your SSID over the wireless network. Select Disable to hide your SSID. The channel used will be displayed. The channel will follow the root AP. This feature is not available in Repeater mode. Click on Scan and select the root AP you with to repeat. When you select the AP, the MAC Address and the SSID fields will populate. Select Open System to communicate the key across the network. Select Shared Key to limit communi
D-Link DWL-2100AP - AirPlus Xtreme G, 95DWL-2100AP User Manual Input your DNS server addresses. Note: If you are entering a DNS server, you must enter the IP address of the default gateway. The DNS server information will be supplied by your ISP (Internet Service Provider.) Click OK. Assigning a Static IP Address in Macintosh ® OSX Go to the Apple Menu and select System Preferences. Click on Network.
D-Link DWL-2100AP - AirPlus Xtreme G, 15DWL-2100AP User Manual Access Point (WEP) Select Disabled or Enabled. (Disabled is selected here). Select HEX or ASCII. Select 64-bit, 128-bit, or 152 bits. Select the 1st through the 4th key to be the active key. Input up to four keys for encryption. You will select one of these keys in the valid key field. Encryption: Key Type: Key Size: Valid Key: First through Fourth keys: * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127.
109DWL-2100AP User Manual (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Non-Applicability of Warranty: The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any refurbished product an
D-Link DWL-2100AP - AirPlus Xtreme G, 33DWL-2100AP User Manual Advanced Performance Settings Wireless Band: Data Rate: Beacon Interval: DTIM: Fragment Length: IEEE802.11g. The Data Rates are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps, 11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps. Beacons are packets sent by an access point to synchronize a network. Specify a beacon interval value. The default (100) is recommended. (Delivery Traffic Indication Message) - Select a setting between 1 and 255. 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. The fragmentation threshold, which is specified in byte
D-Link DWL-2100AP - AirPlus Xtreme G, 86DWL-2100AP User Manual Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
7DWL-2100AP User Manual Front Panel LAN A blinking light indicates data is being transmitted via the Ethernet port. Power A solid light indicates the unit is properly powered. WLAN Blinking green indicates wireless network activity. Rear Panel Ethernet Port Connects the DWL-2100AP to a router or switch using an Ethernet cable. Reset Button
D-Link DWL-2100AP - AirPlus Xtreme G, 34DWL-2100AP User Manual RTS Length: Transmit Power: 802.11g Only: Preamble: Radio: Wireless QoS (WMM): This value should remain at its default setting of 2346. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2346 are recommended Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power. Check if all wireless devices are 802.11g. Uncheck if you are using a mixed wireless network (802.11b and 802.11g). Select Short and Long (default) or Long Only. Select ON or OFF. Select Disable or Enable from the drop-down menu. *Maximum wireles
D-Link DWL-2100AP - AirPlus Xtreme G, 23DWL-2100AP User Manual Enable or Disable SSID broadcast. Enabling this feature broadcasts the SSID across the network. 6 is the default channel for IEEE 802.11g. All devices on the network must share the same channel. Note: The wireless adapters will automatically scan and match the wireless setting. This option is unavailable in WDS. Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks. Select Open System to communicate the key across the network. S
D-Link DWL-2100AP - AirPlus Xtreme G, 26DWL-2100AP User Manual AP Repeater IEEE 802.11g is selected here. Select AP Repeater from the drop-down menu. Select Enable to broadcast your SSID over the wireless network. Select Disable to hide your SSID. The channel used will be displayed. The channel will follow the root AP. This feature is not available in Repeater mode. Click on Scan and select the root AP you with to repeat. When you select the AP, the MAC Address and the SSID fields will populate. Select Open System or Shared Key. Refer to the next page. Disabled by default. You can select Enable if the access point you are connecting to is using Super G mode. Wirele
D-Link DWL-2100AP - AirPlus Xtreme G, 45DWL-2100AP User Manual Update File: Load Settings to the Loacl Hard Drive: Browse for the configuration settings that you have saved to your hard drive. Click OK after you have selected the settings file. Click OK to save the selected settings to your hard drive. Configuration File
D-Link DWL-3140AP - Web Smart PoE Thin Access Point Wireless Router Operation & user’s manual
DWL-3140AP - Web Smart PoE Thin Access Point |
D-Link DWL-6600AP Wireless Router Quick installation manual
DWL-6600AP |
D-Link DWL-AG700AP - AirPlus AG - Wireless Access Point Wireless Router Manual
DWL-AG700AP - AirPlus AG - Wireless Access Point |
D-Link DAP-1320 Wireless Router Technical brief
DAP-1320 |
D-Link DVG-N5402SP Wireless Router Operation & user’s manual
DVG-N5402SP |
D-Link DAP-1360 Wireless Router Operation & user’s manual
DAP-1360 |
D-Link DWL-2100AP - AirPlus Xtreme G Wireless Router Manual
DWL-2100AP - AirPlus Xtreme G |
D-Link DWL-6600AP Wireless Router Cli command reference
DWL-6600AP |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Global Hobby | Fokker D-VII | Instructions for final assembly | global-hobby/fokker-d-vii-875.pdf | 09 Nov 2022 | 40 | |
2 | Sony | Walkman WM-EX672 | Manual de instrucciones | sony/walkman-wm-ex672-QX1.pdf | 18 Jul 2023 | 2 | 0.15 Mb |
3 | Clarion | CZ103A | Owner's manual | clarion/cz103a-68J.pdf | 20 Jan 2023 | 14 | |
4 | Acura Embedded | ACUBRITE | Operation & user’s manual | acura-embedded/acubrite-U5W.pdf | 20 Oct 2023 | 11 | 0.34 Mb |
5 | Olympia | CM 75 | Operating instructions manual | olympia/cm-75-EAY.pdf | 30 Nov 2023 | 38 | |
6 | Whirlpool | SF312PEW | Use and care manual | whirlpool/sf312pew-X5J.pdf | 01 Nov 2022 | 28 |
D-Link
Unied N Concurrent Dual-band PoE Access PointDWL-6600APProduct HighlightsThe DWL-6600AP Unied N Dual-band PoE Access Point is a best-in-class indoor access point designed specically for business-class environments. With high data transmission speeds and access point load balancing, the DWL-6600AP oers high-quality and reliable wireless service. V …
DWL-6600AP(4 pages) |
T-Mobile
Hot SpotQuick Start Guide: Franklin T9 PLEASE NOTE: 1. Hotspot may need to be charged before first use and regularly after that. 2. It normally takes 3~5 hours to fully charge the battery. 3. The battery discharges faster as additional devices connect to your hotspot. 4. Battery life depends on the network, signal strength, temperature …
Franklin T9(3 pages) |
D-Link
Access Point Mode - Upgrade your wireless connectionMediaBridge® Mode - Connect media devices to your wireless networkStart HereQuick Install GuideAccess Point Mode - Upgrade your wireless connectionUse Access Point mode if you want to connect wireless devices such as laptops, tablets, smart phones, and media players to your wired network (via router or sw …
DAP-1525(1 pages) |
Huawei
Configure a Huawei router to connect to the Internet using GigSky - 1Configure a Huawei router to connect to the Internet using GigSkyThe Huawei E5776s Wi-Fi router purchased from GigSky is pre-configured with the correct APN (Access Point Name) setting of gigsky, which enables it to connect to the Internet correctly. Sometimes, when moving between countries …
E5776s(8 pages) |
NEC
www.finelinecoms.co.uk Fine Line Communications (EA) Limited, Logic House, Harfreys Road, Harfreys Industrial Estate, Great Yarmouth NR31 0LS Telephone (01493) 441114 Facsimile (01493) 441124 Email: [email protected] Registration No. 4519551 E&OE Page 1 of 6 NEC SL1100 Voicemail User Guide To setup your voicemail: Dial th …
SL1100(6 pages) |
D-Link
b u s i n e s sDAP-2555AirPremier® N Dual Band, PoE Access Point powered by CloudCommand™Cloud Management• Deploy multiple self-conguring access points in minutes• Manage remotely online, anytime, anywhere• No hardware controllers needed• No separate security infrastructure needed• No on-site conguration needed• Single point of man …
DAP-2555(3 pages) |
Raymarine Other IO Drive#DB1KA4 IO Drive: Raymarine Other Owner Documentation IO Drive, 23 |
PACIFIC CYCLE Bicycle COMPACT BICYCLES 2006PACIFIC CYCLE Product User Manual: COMPACT BICYCLES 2006 PDF Instruction manual - 6H3DYH COMPACT BICYCLES 2006, 11 |
Autostart Remote Starter AS-1414PDF User Manual (@954554), Autostart AS-1414 Remote Starter (Sat 11.2023) AS-1414, 7 |
Vizio Flat Panel TV E500i-A0#IUN5O8: E500i-A0 Flat Panel TV Datasheet E500i-A0, 2 |
Cal Amp Modem Dataradio HiPR-900Cal Amp Dataradio HiPR-900 Manual (Doc Type: Modem Operation & user’s manual) Dataradio HiPR-900, 105 |
JVC DVD Player DR MV79B - DVDr/ VCR Combo#V7JWC3 DR MV79B - DVDr/ VCR Combo: JVC DVD Player Owner Documentation DR MV79B - DVDr/ VCR Combo, 306 |
Supermicro Motherboard X7DB3Motherboard PDF Operation & user’s manual X7DB3, 93 |
Telex Intercom System EKP96#TP4791 EKP96: Telex Intercom System Owner Documentation EKP96, 31 |
Intermec Printer PB50Intermec Printer Instructions (File: intermec-pb50-supplementary-manual-2, 25.01.2024) PB50, 2 |
X-TREME Bicycle XB-300SLAPDF User Guide (@RN1PT4), X-TREME XB-300SLA Bicycle (06/10/2023) XB-300SLA, 33 |
Native Instruments Recording Equipment MASCHINE MK3Guide: Native Instruments MASCHINE MK3 (JOC854, Upd.01.12.2023) MASCHINE MK3, 918 |
Pico Macom Modulator F860Installation and operation manual for Pico Macom F860 Modulator F860, 8 |