Manualios.com

D-Link DSL-2740B Operation & User’s Manual

D-Link DSL-2740B Manual Online:

4.25, 567 votes
D-Link DSL-2740B User Manual
D-Link DSL-2740B User Guide
D-Link DSL-2740B Online Manual

Text of D-Link DSL-2740B User Guide:

  • D-Link DSL-2740B, 61 URL FILTER Window QUALITY OF SERVICE QoS (Quality of Service) is a traffic class rule to classify the upstream traffic, assign queuing priority and optionally overwrite the IP header TOS byte. This is to ensure that the delay-sensitive traffic has higher priority to go to Internet. IP Precedence and IP TOS (Type of Service) marking, once enabled, will overwrite the correspondent TOS byte in the IP haeder. These features, along with Differentiated Service Configuration, are valid only when your ISP has implement these services. 1. Click the Add button to enter your QoS configuration

  • D-Link DSL-2740B, 80 ACCESS IP Window PASSWORD Access to your router is controlled through three user accounts: admin, support, and user. The user name admin has unrestricted access to change and view configuration of your router. The user name support is used to allow an ISP technician to access your router for maintenance and to run diagnostics. The user name user can access the router, view configuration settings and statistics, as well as, update the router's software. By default, all passwords are the same as their account name. To change password, select the speci

  • DSL-2740B Wireless ADSL Router User Guide 21 Using the Setup Wizard - For Static IP Address (1483 Bridge) connection: 1. Select the specific Connection Type and Encapsulation Mode. 2. Enter the WAN IP Address, WAN Subnet Mask provided by your ISP. 3. Select Use the following default gateway/DNS server addresses and enter the ISP Gateway Address, Prima

  • D-Link DSL-2740B, 60 PARENT CONTROL Window URL FILTER URL filter is used to control Internet website access. You can decide that your local hosts can access these specific websites only, or can not access these websites only. 1. Select from the drop-down list Turn on Website Filtering (Allow or Deny). 2. Enter the website URLs or keywords. 3. Click Save Settings to apply this rule To turn off URL filter, select Turn Website Filtering OFF from drop-down list and click Save Settings. Note Local host’s MAC ad

  • D-Link DSL-2740B, 99 3. In the Network and Internet Connections window, click Network Connections. 4. In the Network Connections window, right-click on Local Area Connection, then click Properties. Right-click on the Local Area Connection icon and select the Properties option from the pull-down menu. Click Network Connections. Click Network and Internet Connections.

  • D-Link DSL-2740B, 96 Physical and Environmental DC Inputs: Power Adapter: Input: 120V AC 60Hz Output: 12V AC, 1200mA Power Consumption: 12 Watts (max) Operating Temperature: 0° to 40°C Storage Temperature -20° to 70°C Humidity: 5% to 95% (non-condensing) Dimensions: 109 mm x 142.8 mm x 32.1 mm Weight: 200 gm EMI: CE Class B, FCC Class B (Part 15) Safety: CSA 950, UL 1950, IEC 60950, EN 60950 Reliability: Mean Time Between Failure (MTBF) min. 4 years

  • D-Link DSL-2740B, 100 5. In the General tab of the Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once. Click on the Properties button. 6. Select “Obtain an IP address automatically” by clicking once in the circle. Click the OK button Your computer is now ready to use the Router’s DHCP server. Click Pro p erties. Select Obtain an IP address automatically in the Internet Protocol (TCP/IP) Properties window.

  • 50 VIRTUAL SERVER Use the Virtual Server window to set up single-port or static-port range forwarding rules applied to inbound (WAN-to- LAN) traffic. The Virtual Server function allows remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-2740B will accept remote requests for these services at your Global IP

  • D-Link DSL-2740B, DSL-2740B Wireless ADSL Router User Guide 30 WLAN To access the WLAN Settings window, click on the WLAN link button on the left side of the first window that appears when you successfully access the web manager. WLAN Settings Window Click the Enable Wireless box to allow the router to operate in the wireless environment. Click the Hide Access Point box to allow the router to stop broadcasting its SSID.

  • D-Link DSL-2740B, VIRTUAL SERVER ...........................................................................................................50 PORT TRIGGERING .........................................................................................................51 DMZ...................................................................................................................................53 OUTGOING IP FILTER .....................................................................................................54 INCOMING IP FILTER........

  • D-Link DSL-2740B, DSL-2740B Wireless ADSL Router User Guide 9 Network Connections Wired network connections are provided through the ADSL port and the four Ethernet ports on the back of the Router. See the Rear Panel diagram above and the illustrations below for examples Connect ADSL Line Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into the RJ-11 wall socket.

  • D-Link DSL-2740B, 65 3. Check Enabled box and click Save Settings to apply your settings. To disable RIP, click Disabled radio button and click Save Settings. RIP Window More on RIP settings: RIP Parameters Description

  • DSL-2740B Wireless ADSL Router User Guide 1 1 Introduction This section provides a brief description of the Router, its associated technologies, and a list of Router features. Router Description and Operation The DSL-2740B Wireless ADSL Router is designed to provide connectivity for your private Ethernet LAN, and 802.11b/g/n-draft wireless LAN to the Inter

  • DSL-2740B Wireless ADSL Router User Guide 22 Using the Setup Wizard - For Static IP Address (IPoA) connection: 5. Select the specific Connection Type and Encapsulation Mode. 6. Enter the WAN IP Address, WAN Subnet Mask provided by your ISP. 7. Select Use the following default gateway/DNS server addresses and enter the ISP Gateway Address, Primary and Second

  • D-Link DSL-2740B, DSL-2740B Wireless ADSL Router User Guide 13 Access the Configuration Manager In order to make sure your computer’s IP settings allow it to communicate with the Router, it is advisable to configure your system be a DHCP client – that is, it will get IP settings from the Router. Appendix B describes how to configure different Windows operating systems to “Obtain IP settings automatically”. Note Be sure that the web browser on your computer is not configured to use a proxy server in the Internet settings. In Windows Internet Explorer, you can check if a proxy

  • D-Link DSL-2740B, 76 Configure these parameters for DDNS: DDNS Parameters Description DDNS Server Select one of the DDNS registration organizations form those listed in the pull-down menu. Available servers include DynDns.org and TZO. Host Name Enter the host name of your server. Interface Select your WAN interface (if more than one) that DDNS is applied to. Username (or Key) Enter the username given to you by your DDNS service provider. Password (or Key) Enter the password or key given to you by your DDNS service provider. Email (if used) Enter the email address registered to your DDNS service provider. TIME The Router provides you a method (Net

  • D-Link DSL-2740B, 43 4. Click Save Settings to apply your settings. WLAN Security Window – WPA WLAN Filter The WLAN Filter is used to control wireless client devices access based on their MAC addresses. You can choose to allow or deny the specific MAC addresses. 1. Click the Add button to enter WLAN Filter configuration window. 2. Enter the specific MAC address and click the Save Settings button to apply. 3. Click the MAC Restrict Mode radio button to select filter rule (Allow or Deny) and enable the WLAN filter.

  • D-Link DSL-2740B, 83 STATUS Use these windows to view system information and monitor performance. DEVICE INFO Use the Device Information window to quickly view basic current information about the router and device information including Firmware Version and ADSL connection status. DEVICE INFO window

  • D-Link DSL-2740B, DSL-2740B Wireless ADSL Router User Guide 18 Using the Setup Wizard - For PPPoE/PPPoA connection: 1. Select the specific Connection Type and Encapsulation Mode. 2. Type in the Username and Password (and PPPoE Service Name, if required by your ISP) used to identify and verify your account to the ISP. 3. Select the specific Authentication Method from the drop-down menu (PAP or CHAP). Or user default AUTO to allow Router to negotiate with PPP server automatically. 4. Click Next to go to the next Setup Wizard window.

  • D-Link DSL-2740B, 64 ROUTING Window RIP The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN. 1. Click the Enabled radio button to enable the router RIP function. 2. Select RIP Version and Operation mode from the drop-down list.

  • D-Link DSL-2740B, 95 A Technical Specifications General Standards: ADSL Standards • ANSI T1.413 Issue 2 • ITU G.992.1 (G.dmt) AnnexA • ITU G.992.2 (G.lite) Annex A • ITU G.994.1 (G.hs) • ITU G.992.5 Annex A ADSL2 Standards • ITU G.992.3 (G.dmt.bis) Annex A • ITU G.992.4 (G.lite.bis) Annex A Protocols: • IEEE 802.1d Spanning Tree • TCP/UDP • ARP • RARP • ICMP • RFC1058 RIP v1 • RFC1213 SNMP v1 & v2c • RFC1334 PAP • RFC1389 RIP v2 • RFC1483/2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 (AAL5) • RFC1577 Classical IP over ATM • RFC

  • D-Link DSL-2740B, DSL-2740B Wireless ADSL Router User Guide ix Information you will need about your DSL-2740B Wireless ADSL Router: Username This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is “admin.” The user cannot change this. Record info here Password This is the Password you will be prompted to enter when you access the Router’s management interface. The default Password is “admin.” The user may change this. LAN IP addresses for the DSL-2740B This is the IP address you will enter into the Address field

  • D-Link DSL-2740B, 92 SYSTEM LOG window (1) 1. Click Configure System Log button to enter system log configuration window. 2. Click Enable radio button and select Log/Display Level from the drop down list. 3. Select display mode from the Mode drop-down list; enter the syslog server IP address and port number if Both/Remote Mode is selected. 4. Click Save/Apply button to apply your settings. Configure these parameters for system log on the Router: System Log Category Parameters

  • D-Link DSL-2740B, 41 1. Select 802.1x from the Network Authentication drop-down list. 2. Enter your RADIUS server data: IP Address, Port, and Key. 3. Configure WEP Encryption. (See above section for detail.) 4. Click the Save Settings button to apply settings. WLAN SECURITY Window – 802.1x WPA-PSK WPA-PSK configuration is similar to WEP. The key length is between 8 to 63 ASCII codes.

  • D-Link DSL-2740B, 48 WLAN QoS Window (2) FIREWALL The Firewall Configuration window allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks. There are two general types of protection (DoS, Port Scan) that can be enabled on the Router, as well as filtering for specific packet types sometimes used by hackers. SPI (Stateful Packet Inspection) is a firewall feature that checks the state of network connections. Only legitimate packets are allowed to passthrough. A DoS (denial-of-service) attack is characterized by an explicit attempt by attacke

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Danby DAC5110M Owner's use and care manual danby/dac5110m-PDY.pdf 08 Aug 2023 16 0.56 Mb
2 Aussie Scud 350 Operation & maintenance manual aussie/scud-350-759.pdf 13 Nov 2023 12 3.55 Mb
3 JUKI DDL-8700A-7 Cautions for safety juki/ddl-8700a-7-ID2.pdf 02 Mar 2024 9
4 Char-Broil 463620409 Product manual char-broil/463620409-ZMR.pdf 23 Apr 2023 32 11.42 Mb
5 Directed Electronics 2 Owner's manual directed-electronics/2-4L8.pdf 21 Feb 2024 34 0.52 Mb
6 Binatone iDECT Freedom Twin Operation & user’s manual binatone/idect-freedom-twin-I83.pdf 01 Feb 2024 40 2.7 Mb

Similar Resources:

  • Asus

    RT-N10 B1 (RT-N10+ B1)

    (2 pages)
    RT-N10+EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country:TAIWANAuthorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANYdeclare the following apparatus: Product name : Super Speed …
  • TP-Link

    TD-W8961N

    (2 pages)
    Quick Installation Guide300Mbps Wireless N ADSL2+ Modem RouterMODEL NO. TD-W8961NCD Setup Wizard7106504615 REV1.0.031Insert the TP-LINK Resource CD into the CD-ROM drive.2Select TD-W8961N and click Start Setup.Follow the pop-up ash video to connect your devices, thenclick to continue. Web-based Quick Setup Wizard Please check the LEDs (e …
  • Handicare

    DX REM 420

    (60 pages)
    12341234DX REM 421-420GEBRUIKERSHANDLEIDING BEDIENINGSKASTENUSER MANUAL CONTROLSBEDIENUNGSANLEITUNG STEUERKASTENMANUEL D’UTILISATION BOÎTIER DE COMMANDE9006412B …
  • Moxa Technologies

    ioLogik E2242

    (115 pages)
    ioLogik E2242 User’s Manual Fourth Edition, June 2009 www.moxa.com/product © 2009 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. …
  • Allied Telesis

    AlliedWare AR440S

    (53 pages)
    C613-16049-00 REV Ewww.alliedtelesis.comAlliedWareTM OSHow To |IntroductionIn this How To Note’s example, a headquarters office has VPNs to two branch offices and a number of roaming VPN clients. The example illustrates the following possible components that you could use in a corporate network:z VPNs between a headquarters office and roaming VPN clients, …
  • Huawei

    WS5200

    (208 pages)
    Quick Start Guide� …

Comments, Questions and Opinions: