Manualios.com

Daxten RACKACCESS 16I - Installation Manual

Daxten RACKACCESS 16I - Manual Online:

3, 2741 votes
Daxten RACKACCESS 16I - User Manual
Daxten RACKACCESS 16I - User Guide
Daxten RACKACCESS 16I - Online Manual

Text of Daxten RACKACCESS 16I - User Guide:

  • Daxten RACKACCESS 16I -, Single computer Settings To see all the Settings of a single computer, right click the computer icon. The Settings appear as in the figure below. Note! There is no Select box to check. Loading a saved configuration To load a saved configuration: From the File menu choose Open. Note: All changes done with the Control software are only reflected in the OSD AFTER pressing “Write Configuration” The factory default Settings To revert to the factory default Settings: On the toolbar press “Set Default” There is no need to press “Write Configuration”. Upgrading the SCOUTutp firmware With the SCOUTutp Update software program you can upgrade t

  • Daxten RACKACCESS 16I -, Communication Error If a Communication Error box appears when trying to scan the system, check that: The Serial download cable is connected to the computer’s and SCOUTutp IP Manager’s serial ports. The Com Port Settings in Options / Com Port are set correctly. After changing the Com port exit and re-start the Control software. The View menu From the View menu choose one of the following: -All computers, or only active switched on computers. -The Legend -The toolbar Selecting a computer To select a computer: Click on the computers icon. The syste

  • Monitor 15” TFT Display 17” TFT Display 19” TFT Display Display Area: 30.4 x 22.8 cm 12 x 9” 33.7 x 27.0 cm 13.7 x 10.64” 37.6 x 30.10 cm 14.8 x 11.8” Scan frequency horizontal: 31.47K to 68KHz 31.47K to 68KHz 31.47K to 68KHz Scan frequency vertical: 60Hz to 85Hz 60Hz to 75Hz 60Hz to 75Hz Viewing Angle: 160° Horizontal, 160° Vertical

  • General Settings Security Hotkey Autoskip Serial port Keyboard language Switch name General Settings Select General and press ENTER , the General Settings window will appear. From this window you can do the following: Security The OSD comes with an advanced password security system with 3 different security levels. Each security level has different

  • Daxten RACKACCESS 16I -, Resetting the Switch or ADAPTOR units To reset the Switch or ADAPTOR units: 1. For the Switch, check the SCOUTutp Switch option in the Switch Unit box. 2. For the Adaptors, check one or more Adaptors in the ADAPTOR Units box. 3. From the Options menu choose Advanced / Reset. The units reset. The system should now be operational. Troubleshooting tips When using Firmware Update software you may sometimes get a Communication Error message. When updating a unit and a Communication Error message appears, do the following: 1. Check that the Serial download cable’s connector is connected to the Switch’s Communication port.

  • Daxten RACKACCESS 16I -, Agency Approvals EMI FCC-A and CE Emissions MRP-II Energy Saving EPA energy star, VESA DPMS CPU Adaptors PS/2 USB SUN Connections Video HD15 HD15 HD15 Keyboard/Mouse MiniDin6 USB MiniDin8 System RJ45 RJ45 RJ45 Power From computer’s Keyboard port From USB port From computer’s Keyboard port Product weight 107g / 0.23lb Shipping weight 300g / 0.66lb Dimensions 91 x 41 x 24mm / 3.58 x 1.61 x 0.94” NOTE: This equipment complies with the requirements of European EMC directive 89/336 EEC in respect of

  • Daxten RACKACCESS 16I -, Moving the label – F6 Position the OSD label anywhere on the screen. To position the OSD label from the Main window, navigate to the desired computer using the Up and Down arrow keys. Press F6 . The selected screen image and Identification label will appear. Use the arrow keys to move the label to the desired position. Press Esc to save and exit. Using the Control software As an alternative to the OSD you can operate the SCOUTutp system with the Control software located on the Documentation CD. With the OSD you operate

  • Typing 9 9 9 in the T/O column disables the Timeout function. Typing 0 0 0 – the Timeout function works immediately. We recommend a T/O setting of at least 10 seconds. Typing 9 9 9 in the SCN column displays the screen for 999 seconds. Typing 0 0 0 – the computer screen is skipped. Users USERS SETTINGS USERS 1 2 3 4 5 6 0 1 COMPUTER 0 1 Y Y

  • Daxten RACKACCESS 16I -, Specifications Part Numbers 3115-108M-xx RackAccess 8i console - 15” TFT Display & integrated SCOUTutp 8 port kvm Switch 3115-116M-xx RackAccess 16i console - 15” TFT Display & integrated SCOUTutp 16 port kvm Switch 3115-116MIP-xx RackAccess 16i console - 15” TFT Display & integrated SCOUTutp 16 port kvm Switch & IP Access 3117-108M-xx RackAccess 8i console - 17” TFT Display & integrated SCOUTutp 8 port kvm Switch 3117-116M-xx RackAccess 16i console - 17” TFT Display & integrated SCOUTutp 16 port kvm Switch 3117-116MIP-xx RackAccess 16i console - 17” TFT Display & integrated SCOU

  • Daxten RACKACCESS 16I -, User Mode: Changes the RGB colour values Changes the viewable screen size Execute the white balance function Adjusts phase tracking to reduce screen flicker Change Red gain for the colour temperature Moves the whole screen left or right Change Green gain for the colour temperature Moves the whole screen up or down Change Blue gain for the colour temperature Return to the previous Menu Return to the previous Menu Sets the colour temperature to 6500K Sets the colour temperature to 9300K Return to the previous Menu OSD Ad

  • Daxten RACKACCESS 16I -, 7. Power switch Use the power switch to turn ON or OFF power. We recommend turning your system on first, then the LCD monitor. Adjusting the Monitor The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to all the possible variations between these video adapters, you may need to adjust the settings for your video card. Adjustment Procedure First, you must activate the OSD screen through pressing the MENU key, the OSD menu will show in the centre of screen as below Figure 1 - The OSD Screen

  • Daxten RACKACCESS 16I -, NOTE: The USB ADAPTOR stores these settings in their own internal memory so even if you unplug, power down, or move them to another computer, the settings will not be lost. The following table illustrates how the W and R settings change key assignments on a PS/2 keyboard. Mac Equivalents Settings PS/2 Keyboard Layout Left á key Left Alt Right Alt Right á key None (Mac default) Alt/Option Command Command Alt/Option W (PC default) Command Alt/Option Alt/Option Command WR Alt/Option Command Alt/Option Command R Command Alt/Option Command Alt/Option More Specia

  • Daxten RACKACCESS 16I -, Password protection When the SCOUTutp system is password protected, the Control software behaves in exactly the same way as the OSD. You must type in the required password to access the Control software. The access you gain depends on the security status –. To change the security access, close and reopen the Control software, and type in the different passwords. Administrator (Status A) The Administrator can: ¾ Set and modify all Passwords and security profiles ¾ Fully access any computer ¾ Use all functions Supervisor (Status S) The Supervisor can: ¾ Fully access any computer ¾ Scan computers User (Status U) There are

  • Daxten RACKACCESS 16I -, Ports PORTS SETTINGS Name K B HKEY 01 COMPUTER 01 P S N O 02 COMPUTER 02 U 1 N O 03 SWITCH 03 P S C L F 1 1 04 COMPUTER 04 P S N O 05 COMPUTER 05 U 2 N O 06 COMPUTER 06 U 3 N O 07 COMPUTER 07 P S N O 08 COMPUTER 08 P S N O In the Settings window navigate to the Ports line and press ENTER. The Ports Settings window appears. Name (Editing the computer name) In this window you can edit the computer names with up to 15 characters. To erase a character you have to select it an

  • Daxten RACKACCESS 16I -, Auto-Adjustment We recommend that you use the Auto-Adjustment to get optimized video quality. Use the + + & ▬ ▬ key to select auto-adjustment, then press ▼ ▼ key to get optimized quality. Introduction – Integrated SCOUTutp Switch The built in KVM switch (SCOUTutp) will ensure easy and accurate control of up to 16 PCs through a single console. The SCOUTutp is compatible with PS/2, USB and SUN style computers. It has keyboard and mouse emulation for error free boot-ups. Switching between PCs can be accomplished through keyboard Hot

  • Daxten RACKACCESS 16I -, Service Information Technical Support If you cannot determine the nature of a problem, please call Daxten and ask for Technical Support. If possible, call from a phone located near the unit, as we may be able to solve your problem directly over the phone. If we cannot solve your problem, and determine that the fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must appear on the outside of all returned products. The unit should be double-packed in the original container,

  • Daxten RACKACCESS 16I -, www.daxten.com Ireland Bay 21 Free Zone West Shannon, Co. Clare [email protected] www.daxten.ie Tel: +353 (0) 61 23 4000 Fax: +353 (0) 61 23 4099 • USA 811 W. Evergreen Ave Suite 302A Chicago, IL 60622 [email protected] www.daxten.us Tel: +1 312 475 0795 Fax: +1 312 475 0797 • United Kingdom 5 Manhattan Business Park Westgate London W5 1UP [email protected] www.daxten.co.uk Tel: +44 (0) 20 8991 6200 Fax: +44 (0) 20 8991 6299 • Österreich Künstlergasse 11/4 A-1150 Wien info.at@daxten

  • Daxten RACKACCESS 16I -, RackAccess 8i & RackAccess 16i Introduction The RackAccess 8i and 16i are compact 1U high rack mountable TFT Screen, keyboard and mouse, with integrated kvm switch (SCOUTutp). Available in 3 screen sizes 15”, 17” and 19” Product Features ¾ Integrated SCOUTutp 8 or 16 port KVM switch. ¾ Available with integrated IP control (SCOUTip). ¾ Operating system independent, transparent to all applications. ¾ Supports PS/2, USB and SUN computers through an adapter for each platform. ¾ Hot ke

  • Daxten RACKACCESS 16I -, Using the SCOUTutp Note: Before switching your computers on, please configure non PS/2 computers emulation type in the OSD! The SCOUTutp provides two possibilities to select the desired computer. You may use either the keyboard Hot Key commands or take advantage of the OSD (On-Screen-Display). You may notice that the mouse cannot be used for around 1 second when the SCOUTutp switches to another computer. This is normal and is caused by the synchronization process which ensures that the mouse ope

More Instructions:

DOWNLOAD

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 HP EliteBook 8570w Getting started manual hp/elitebook-8570w-Q6B.pdf 17 Nov 2023 61 5.04 Mb
2 U.S. General 93874 Assembly and operating instructions manual harbor-freight-tools/93874-M17.pdf 03 Jan 2023 19 1.78 Mb
3 Sunbeam Open All CA2800 Instruction booklet sunbeam/open-all-ca2800-2WJ.pdf 31 Aug 2022 12
4 ATI Technologies MULTIMEDIA CENTER 8.2 Operation & user’s manual ati-technologies/multimedia-center-8-2-Z9G.pdf 30 Mar 2023 110 1.4 Mb
5 EarthWise TC70001 Operator's manual earthwise/tc70001-232.pdf 12 Feb 2023 12
6 ProSpot Fitness P-100 Owner's manual prospot-fitness/p-100-17U.pdf 26 May 2023 14

Similar Resources:

  • Sharp

    LL-T1501

    (124 pages)
    RLCD MONITORLCD FARBMONITORMONITEUR LCDMONITOR LCDMONITOR LCDLL-T1511ALL-T1501AOPERATION MANUALBEDIENUNGSANLEITUNGMODE D’EMPLOIMANUALE D’USOMANUAL DE FUNCIONAMIENTO(Figure shown is LL-T1511A.)(Die Abbildung zeigt das Modell LL-T1511A.)(Le modèle illustré ici est le LL-T1511A.)(La figura illustrata è LL-T1511A.)(La ilustración muestra el modelo LL-T15 …
  • OTEKsys

    OT15

    (13 pages)
    UUsseerr MMaannuuaall // IInnssttaallllaattiioonn GGuuiiddee MMooddeell NNoo.. OOTT1155//CCTT1155 Warning! It will cause malfunction if the monitor is operating with unspecified power supply unit or incorrect power voltage. Do not exposure this unit in the rain or moisture environment to reduce the risk of fire or electric shock. Conten …
  • Panasonic

    PT-50PD3 Operating

    (36 pages)
    High Definition Plasma DisplayOperating InstructionsTH-50PHW3Model No.TQBC0241®For assistance, please call : 1-888-VIEW-PTV(843-9788)or send e-mail to : [email protected] or visit us at www.panasonic.com (U.S.A)For assistance, please call : 787-750-4300(Puerto Rico)For assistance, please call : 1-800-561-550 …
  • ViewSonic

    ViewBoard IFP9850-3

    (128 pages)
    IFP9850-3Commercial Touch DisplayUser GuideModel No. VS17853P/N: IFP9850-3IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® …
  • Vitek

    VTM-LCD220P

    (2 pages)
    BLACKYELLOWMAGENTACYAN(888) VITEK-70 | WWW.VITEKCCTV.COM28492 Constellation Road Valencia, CA 91355VTM-LCD220P22” Wide Screen Professional LCD Monitor • 22” Wide Screen LCD Display Panel• VGA, Dual Looping BNC Composite, and HDMI Video Inputs & Stereo Audio Input• Resolution up to 1680 x 1050• Contrast Ratio of 1000:1• Front Panel Controls� …
  • Philips

    230E1HSB

    (76 pages)
    230E LCD 1 23” TFT LCD COLOR MONITOR Service Service 230E1HSB/00 230E1HSB/62 230E1HSB/97 230E1HSB/69 230E1HSB/75 230E1HSB/93 Service Manual TABLE OF CONTENTS Description Page Description Page Important Safety Notice ....................................... …

Comments, Questions and Opinions: