Delphi TNR800 - Navigation System With DVD-ROM Operation & User’s Manual

Text of Delphi TNR800 - Navigation System With DVD-ROM User Guide:

• Delphi TNR800 - Navigation System With DVD-ROM, 1-8 Overview Entering a Point of Interest (POI) 1. Press the power/volume knob to turn the audio and navigation system on. 2. Insert the DVD map disc into the radio CD slot. 3. A notice may appear. Touch the NEXT screen button to proceed. If the radio is already on with a map disc inserted, push the NAV hard key. 4. Touch the DEST screen button located in the lower left corner of the map. 5. Verify that the selected Search Area is correct. 6. Touch the POI screen button. 7. Enter the specific title of the POI in the Name space (Washington Monument, Gateway Arch) using the alpha keypad on the screen. • If there are POIs

• Delphi TNR800 - Navigation System With DVD-ROM, 2-18 Features and Controls Memory Points Touching the Memory Points screen button will display the Memory Points menu. This menu contains options for register- ing, deleting, and editing marked points stored in memory, such as memory points, preset destinations, and areas to avoid. Memory Points: Choosing to add a memory point will take you to the Destination menu. You may register up to 30 memory points. The name, location, information, and icon for a memory point may also be edited. Preset Dest (Destination): Five preset destinations, as well as one for home, may be registered or edited. The five preset destinations, home, and Emergency are the only destination

• 3-3 Navigation Audio System Setting Preset Stations Up to 30 stations, six AM, six FM1, six FM2, six XM1, and six XM2, if equipped, can be programmed using the six screen buttons on the bottom of each band menu. To set preset stations, do the following: 1. Turn the audio system on. 2. Press the BAND hard key to select AM, FM1, FM2, XM1, or XM2, if equ

• Delphi TNR800 - Navigation System With DVD-ROM, 2-44 Features and Controls Problems with Route Guidance Inappropriate route guidance may occur under any of the following conditions: • You have not turned onto the road indicated by the system. • Route guidance is not available for the next turn. • The route is not changed during automatic rerouting. • Plural names of places are displayed. • You are driving at high speeds, which may cause the automatic rerouting to not calculate a valid route for your direction of travel. • The route prohibits the entry of a vehicle due to a regulation by time or season or any other regulation which may be given. • A route cannot be found. • A ro

• Delphi TNR800 - Navigation System With DVD-ROM, 2-32 Features and Controls Destination Preview Menu Each time a destination is entered, a screen with the destination preview menu will appear. This screen will display a zoomed in view of the destination, as well as the following options: Enter Destination: Touch this screen button to enter the current destination as the only destination in the system. The route will be calculated and the Route Preview screen will be displayed. Add Waypoint: Touch this screen button to add the current destination to your current trip. The Add Waypoint screen will be displayed. Touch the Add screen button that corresponds with where you

• 2-42 Features and Controls Global Positioning System (GPS) The navigation system determines the position of your vehicle by using satellite signals, various vehicle sig- nals and map data. The Global Positioning System (GPS) locates the current position of your vehicle using signals sent by the United States Department of Defense GPS satellites. While your vehicle is

• Delphi TNR800 - Navigation System With DVD-ROM, 2-16 Features and Controls Navigation Setup (continued) Enter Speed Change?: This feature allows you to adjust esti- mated speeds for Freeway, Main street, or Residential driving. These speed values are used to calculate estimated travel time. To change estimated speeds, touch the Yes screen but- ton. The Change Speed menu will appear. Touch the arrow screen buttons under each road type to increase or decrease the speed. The maximum allowable speed estimate is 100 mph (161 km). You may also touch the Default screen button to choose facto

• Delphi TNR800 - Navigation System With DVD-ROM, 1-6 Overview Entering an Address, Point of Interest, Home and Preset Destinations Before you enter an Address, Point of Interest, Home or any Preset Destination, you must select the appropri- ate search area that contains the final destination you wish to enter. Your vehicle must be stopped to perform this operation. Setting the Search Area 1. Press the power/volume knob to turn the audio and navigation system on. 2. Insert the DVD map disc into the radio CD slot. 3. A notice may appear. Touch the NEXT screen button to proceed. If the radio is already on with a map disc inserted, push the NAV hard key. 4. Touch the DEST screen button. 5. Tou

• Delphi TNR800 - Navigation System With DVD-ROM, 1-10 Overview Using Your Home or Preset Destinations These destinations are available for selection while driving: 1. Press the power/volume knob to turn the audio and navigation system on. 2. Insert the DVD map disc into the radio CD slot. 3. Touch the DEST screen button. 4. Touch the (Home symbol) or one of the available Preset Destination symbols at the bottom of the Destination screen. 5. Once you begin driving, or if you are already driving, you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode. Canceling Guidance Guidance will be canceled once you arrive at your final destination. To cancel guidance prior

• 2-33 Features and Controls Info (Information): When a POI icon is selected on the screen, you can touch this screen button to display the name, address, and telephone number, if available, for the selected POI. See “Navigation Options” later in this section for more information on POIs and their icons. Route Preference: This option will display the Route

• 2-27 Features and Controls If an arrow appears to the right or left of the item name, the complete name is too long for the display. Touch the right or left arrow screen buttons to scroll to the end or beginning of the name. The POI for Restaurant is broken down into several distinct categories. Select the Restaurant screen button from the POI choices. A list of cuisine types will

• Delphi TNR800 - Navigation System With DVD-ROM, 2-28 Features and Controls Previous Destination The Previous Destination entry method allows you to select a destination by choosing from a list of previously entered destinations. Touch the number next to the desired previous destination to select it. Emergency The Emergency destination entry method allows you to select a destination by choosing from a list of emergency facilities. The list will vary by area. Selecting Police Station or Hospital will display a list. The list can be changed to appear in alphabetical order, or in order by distance. Besides the home preset destination and preset destinations 1 through 5, Emergency is the only destination entry met

• Delphi TNR800 - Navigation System With DVD-ROM, 2-19 Features and Controls Register Home: Touch this screen button to get access the Register Home screen. Choose a method of des- tination entry and enter the destination you would like to store as home. Once your entry is complete, touch the Register Point screen button to store this point as home. Each time you touch the home symbol from the bottom of the Destination screen, this destination will be calculated. Once you have stored a destination as home, the Register Home screen button will change to read Delete Home. You may then touch this screen button to delete the destination you have stored as home. Del. Prev. Dest. (Delete

• Delphi TNR800 - Navigation System With DVD-ROM, 2-25 Features and Controls As information is entered, the system will automatically search for available names, and the List screen button will become available. Touch the List screen button to view name choices and select the desired street name, or touch the Back screen button to continue to spell the street name, further reducing the number of available items. The box at the end of the Street entry field will contain the number of items in the current generated list. Once the street name has been selected, enter the house number

• Delphi TNR800 - Navigation System With DVD-ROM, 2-9 Features and Controls Route Overview Selecting the Route Overview screen button will show the map with the route highlighted. The total distance and estimated travel time are also displayed. Map Appearance Selecting the Map Appearance screen button allows you to ad- just the appearance of a map based on your preferences. This menu is divided into three sections: Map Orient (orientation), Guidance Mode, and Map Mode. Touch an option’s screen button to select it. The following are brief explanations of the options available in each section: North Up: This feature orients the map with North at the top of the map screen, regardless

• Delphi TNR800 - Navigation System With DVD-ROM, 2-22 Features and Controls Preset Destinations The preset destination entry method allows you to select destina- tions that were registered as presets 1 through 5. These presets, along with the home symbol preset, are located at the bottom of each page of the Destination menu. Besides the home preset destination and Emergency destination entry method, these are the only presets available for selection while the vehicle is moving. Alpha-Numeric Keypad Letters of the alphabet, symbols, punctuation, and numbers, when available to you, will be displayed on the navigation screen as an alpha or numeric keypad. The appropriate keypad will automatically be displayed w

• Delphi TNR800 - Navigation System With DVD-ROM, 2-20 Features and Controls Destination The Destination menu will give you several ways to plan a route by entering destination points. Touch Dest at the bottom of the map screen to display the Destination menu. Destination Button

• Delphi TNR800 - Navigation System With DVD-ROM, 2-4 Features and Controls Touch-Sensitive Screen Buttons Touch-sensitive buttons are located on the navigation screen. When you have successfully selected a but- ton on the screen, a beep will sound. This feature can also be turned off. See Configure Menu on page 2-38 for more information. Screen buttons will be highlighted when available and dim when they are unavailable. There are also some toggle touch-sensitive screen buttons that will be light blue when active and dark blue when not active. The following touch-sensitive screen buttons will appear frequently at the bottom of a map screen. Dest (Destination): Touch this screen button to display the Destination me

• Delphi TNR800 - Navigation System With DVD-ROM, 1-9 Overview Setting Home Destination 1. Press the power/volume knob to turn the audio and navigation system on. 2. Insert the DVD map disc into the radio CD slot. A notice may appear. Touch the NEXT screen button to proceed. If the radio is already on with a map disc inserted, push the NAV hard key. 3. Touch the Nav (navigation) menu screen button. 4. Touch the Memory Points screen button. 5. Touch the Register Home screen button. 6. Touch the Address screen button and then enter all address information. 7. Touch the Register Point screen button to store the home address as a memory point. See page 2- 19 for more details. Setting Preset Des

• Delphi TNR800 - Navigation System With DVD-ROM, 2-21 Features and Controls Search Area: The Destination menu allows you to select the area to be searched for your destination. A map of the United States, including Hawaii, and Canada will be shown. The map is divided into 9 regions. Before selecting a destination, review the search area map on the right side of the menu to make sure your destination is located in the highlighted region. Change: If you need to see a more detailed search area map with a list of states, or to change the search area, touch the Change screen button. The Sear

• Delphi TNR800 - Navigation System With DVD-ROM, 2-7 Features and Controls Symbols The following symbols are the most common that ap- pear on a map screen. Your vehicle is shown as this symbol. It indicates the cur- rent position of your vehicle on the map. This red bulls-eye symbol will appear on the map to show your destination after a route has been planned. See Destination on page 2-20 for information on plan- ning a route. When one of five possible destinations has been set, you will see a circle with numbers 1 through 5, depending on which number the destination

• Delphi TNR800 - Navigation System With DVD-ROM, 2-1 Features and Controls Using the Navigation System This section includes the basic information you will need to know to operate the navigation system. The main navigation menu displays a number of options which offer information on a variety of topics. See Nav- igation Menu on page 2-8 for more information. Use the keys located to the left of the navigation screen along with the available touch-sensitive screen buttons on the navigation screen to operate the system. Once the vehicle is moving, various functions will be dis- abled to reduce driver distractions. Hard Keys The following hard keys are located to the left of the navigation screen: (Power/Volume Knob): Press th

• 2-2 Features and Controls Hard Keys (continued) NAV (Navigation): If you are in a menu and are not on the map screen, press the NAV key to view the map showing current vehicle position. If a route has not been planned, pressing this key will display the map screen and the following information: • North or Heading Up symbol • Time • Map scale If a route has been planned,

• Delphi TNR800 - Navigation System With DVD-ROM, 2-13 Features and Controls Route Preview Selecting the Route Preview screen button once route guidance has begun will display the map screen with the route highlighted. The route is traced by the vehicle symbol as you travel. You can preview the route from the starting position to the final destination by touching the arrow screen buttons inside the Route Preview pop-up menu. Info (Information): Touch the Info screen button to view POI in- formation such as the POI name, address, and phone number, if available. Edit: Touch the Edit screen button to select a POI as the next destination you would like to preview. To preview a POI’s desti- nation instead of the final destination,

• Delphi TNR800 - Navigation System With DVD-ROM, 3-6 Navigation Audio System This system relies on receiving specific information from these stations and will only work when the informa- tion is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happens, contact the radio station. While the radio is tuned to an RDS sta- tion, the station name or call letters will appear on the display instead of the frequency. Touch the Info screen button on the band menu to receive information the selected radio stati

More Instructions:

	Delphi TNR800 - Navigation System With DVD-ROM Owner's manual 02-11-2023 19	DOWNLOAD
	Delphi TNR800 - Navigation System With DVD-ROM Installation instructions manual 29-08-2022 101	DOWNLOAD

Related Products and Documents (Car Video System):

Comparable Devices:

Similar Resources:

• Pioneer AVIC-F700BT - AVIC F700BT - Navigation System (21 pages) Important Information for the UserFLASH MEMORY MULTIMEDIA AV NAVIGATIONRECEIVERAVIC-F900BTAVIC-F700BTAVIC-F7010BTAVIC-F90BTBe sure to read this leaflet first! This manual includesthe important information that you must understandbefore using this navigation system.Notice to all users:This software requires that the navigation system isproperly connected to y …

• Lanzar SNV65i3D (60 pages) OWNER’S MANUALSNV65i3D6.5” Double DIN In-Dash Touch Slide Control Screen TFT/LCD Monitor w/DVD/CD/MP3/MP4/USB/SD/AM-FM/RDS/3D UI/Bluetooth & Screen Dial Pad Built-In GPS/TTS w USA/Canada & Mexico Maps …

• Dual XDVD8182 (44 pages) INSTALLATION/OWNER’S MANUALDVD Multimedia Receiver with 7” Touch Screen DisplayXDVD8182The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most …

• JVC KW-V130BT (78 pages) B5A-1363-00 (KN)© 2016 JVC KENWOOD CorporationMONITOR WITH DVD RECEIVERINSTRUCTION MANUALKW-V230BTKW-V130BT2017KW-VEntryK.indb1 2016/06/0221:22 …

• Alpine CDE 102 - Radio / CD (31 pages) Designed by ALPINE Japan68-09359Z73-AENFRES MP3/WMA/AAC CD ReceiverCDE-102• OWNER’S MANUAL Please read before using this equipment.• MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil.• MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo.ALPINE ELECTRONICS MARKETING, INC.1-1-8 Nishi Gotanda,Shinagawa-ku,Tokyo 141-0031, JapanPhone 03- …

• CrimeStopper SV-5340 Platecam (4 pages) INSTALLATION INSTRUCTIONS: The SV-5340 is a special designed license plate metal bar back up camera with a super wide view angle. The mounting bracket is designed to be installed behind the license plate on any vehicle so that only the camera is visible. It’s easy to install with no drilling required, requiring minimal inst …

Comments, Questions and Opinions: