Manualios.com

Delphi NAV200 - Portable GPS Navigation System Owner's Manual

  • NAV200 - Portable GPS Navigation System GPS
  • mamHbmMRrYIMw
  • Owner's Manual
  • PDF / Adobe Acrobat Reader
  • 85

Delphi NAV200 - Portable GPS Navigation System Manual Online:

3.4, 1022 votes
Delphi NAV200 - Portable GPS Navigation System User Manual
Delphi NAV200 - Portable GPS Navigation System User Guide
Delphi NAV200 - Portable GPS Navigation System Online Manual

Text of Delphi NAV200 - Portable GPS Navigation System User Guide:

  • Delphi NAV200 43 3. Tap Add to route. The Route Planning screen appears. The destination is added as route point 1. 4. Repeat steps 2-3 for every route point you want to add to the itinerary.

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 22 3. Buttons to enter data: These are actually entry fields, like City or Zip, Street, Category, etc. When you tap an entry field, another screen with a keyboard, list, or both will appear. The entry must be confirmed by tapping another button (normally OK or Save) before the current screen closes. Lists Often you will be asked to select an item from a list. One entry is always highlighted. Scroll through list with the buttons and select your desired entry with the icon. Adjusting the Volume Volume cannot be adjusted via the touch screen. To adjust the volume, turn the dial located on the right side of the device.

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 54 On the Map screen, you have several control options: Tap on map: A quick tap accesses the Additional Functions screen, where you can make adjustments. Tapping and holding on the map brings up information about the selected point. Hide/show icons: Hide all icons so you can see more of the map. Tap again to restore icons. Note: Also tap this icon to restore the standard view of the map if you have modified it, as described below. Frozen position (default): Makes the map scroll continually. Your current position (green arrow) is always centered in the bottom third of the map. Frozen map: Freezes the map in its current locatio

  • Delphi NAV200 14 Section 5 Getting Started Warning: For your safety, program the Delphi NAV200 and enter information about your destination BEFORE you start your journey. Do not operate Delphi NAV200 while driving. Powering Up Power on Press the Power button located on the lower left side for at least one second. Power off Press the Power button lo

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 39 Select from the following options: [!] Caution: Using this function while you are already navigating deletes all current destinations, including stopovers. View the selection on the map. Save the destination in Saved Destinations. Using Your Home Address To store your home address, select Settings on the Main Menu and then select home address to enter. If you have stored your home address, you may quickly begin navigation home from any location by tapping the icon on the Main Menu. The route is calculated based on your settings in Routin

  • Delphi NAV200 71 Previous/Next: Tap the arrows or press the +/- buttons to select the next or previous audio file in the list. If the file is damaged, Delphi NAV200 automatically skips to the next available file. List: Displays the play list screen. The file currently being played is highlighted. This screen allows you to scroll through your list of audio files, or arra

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 34 Selecting Destinations on the Map (Extended Mode Only) The Delphi NAV200 allows you to indicate a destination directly on the map. In addition to selecting cities and streets, you may also select points of interest quickly. To select a destination on the map, follow these steps: 1. In the Main Menu, tap . The Destination screen opens: Tap the State (or Region or Province) entry field and select the appropriate entry. 2. Tap Select on map. The Map screen

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 82 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 66 If you have configured TMC with confirmation, the following screen will inform you of a reported obstacle on your route: Tap the Evade icon to recalculate your route around the obstacle. Tap the Ignore icon to continue on the current route.

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 21 GMT: Greenwich Mean Time Longitude/Latitude: Current position Satellites: Number of received satellites; at least three satellites must be received for navigation HDOP: Horizontal Dilution of Precision (Indicates the quality of position determination. Theoretically, any value from 1 to 50 may occur. The smaller the value, the more accurate the position determination. A 1 indicates no deviation from the real position. Values up to 8 are acceptable for navigati

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 16 Home Screen The main menu offers eight options, each of which are detailed in the sections that follow: At any time you can return to this menu by pushing the Main Menu button or by closing the current mode (accomplished by tapping the “x” in the upper right corner of the screen).

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 38 Recent Destinations The Delphi NAV200 remembers recently selected destinations. On this screen, you can select destinations for navigation, add destinations to Favorites, and delete destinations. To use Recent Destinations, follow these steps: 1. (Standard Mode) In the Main Menu, tap . 1. (Extended Mode) In the Main Menu, tap The Destination screen appears: Tap . 2. The Recent Destinations screen appears: Tap on your choice to highlight it, then tap . 3. The Address screen appears:

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 45 Load itinerary: Load a saved itinerary. The Select Itinerary screen appears: Select the desired itinerary and tap . Rename itinerary: Rename a saved itinerary. The Select Itinerary screen appears: Select the desired itinerary and tap . The Name of the Itinerary screen appears:

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 69 Playing an Audio File Audio functions are controlled by tapping on the various buttons located on the control bar in the lower half of the screen: Play: Pressing the Play button plays the file listed at Current Music. The screen will display current playback time and playback status. If a file is damaged, the next file will be played without opening a popup screen. If all files are damaged, a popup screen opens and all audio playba

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 48 Calculating the Route An itinerary may be calculated even if no GPS signal is being received so you can get an impression of the route. Note: When you start navigation, the system identifies your current location and makes it the start point. The first indicated route point becomes your first stopover. 1. On the Route Planning screen, tap the icon to calculate the distance and the estimated duration of the route. The Route Options screen opens: 2. Set the route options. For detailed information on setting route options, see “Configuring The Delphi NA

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 36 Add the selection to your itinerary. The selected point will be marked by a small flag. It will also be added to the list of route points on the Route Planning screen, where it will be labeled as your destination point. Note: Using this function while you are already navigating causes an immediate recalculation of your route. Make the selection your next stopover on your itinerary. Your route will be recalculated immediately. Favorites All destinations you have saved by tapping th

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 51 The simulation will begin when the calculation has finished . To stop the simulation at any time, tap the options icon. The Additional Functions screen opens. Tap . Starting Navigation in Extended Mode 1. Once a destination has been selected, tap . The Route Options screen appears: 2. Set the route options. For detailed information on setting route options, see “Configuring The Delphi NAV200.” Note: The standard settings for the route options may be changed on the Route Options screen. F

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 70 Stop: Playback stops. Current status is displayed as “Stop.” Current playing time is displayed as “00:00:00.” If Previous or Next is selected during stop, only the file name moves; playback remains stopped. Repeat: Default is All Repeat mode. Tapping this option cycles through “All Repeat > All Play > 1 Track Repeat > All Play.” The repeat setting remains when Music mode is exited, and is saved for the next session. Mute: Mutes al

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 10 Memory Cards The Delphi NAV200 has 32 megabytes of internal memory available for the operational system (Microsoft Wince Net Core version 4.2). SD (secure digital) Memory cards are available for purchase and should be used to store other media files such as video (avi), images (jpg, gif, png) and/or audio (mp3, wav) files. An SD card can be plugged into the slot in the Delphi NAV200 and can be purchased with various memory capacities. An SD card with 256 megabytes of memory or more can be used in the Delphi NAV200. Delphi recommends the use of following SD card brands: Kingston, Kingmax, Trans

  • Delphi NAV200 - Portable GPS Navigation System, Delphi NAV200 11 Section 3 Installing Delphi NAV200 in Your Vehicle Warning: To avoid personal injury, follow the safety guidelines and installation instructions provided so that the Delphi NAV200 does not obstruct the view of the driver, interfere with the operation of any airbags and safety features in the vehicle, or become airborne in the case of an accident. Do not attempt to install Delphi NAV200 while driving. Before installing the Delphi NAV200, check whether your vehicle is fitted with a heat-reflecting or heated windshield. If so, you will need to purchase an external antenna from yo

  • Delphi NAV200 26 Extended Mode The Extended mode Main Menu screen appears : The following functions are accessed from the Extended mode Main Menu screen, and are explained fully in the pages that follow. Tap the Navigation icon to enter a destination with no stopover. Tap the Home icon to navigate to your home address. Tap the Route planning icon to pla

Related Products and Documents (GPS):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Toshiba Strata DK 16 Operator's manual toshiba/strata-dk-16-U1E.pdf 10 Sep 2023 207
2 Insignia NS-DP3CH Quick setup manual insignia/ns-dp3ch-T6Q.pdf 06 Apr 2023 2
3 Kyosho Rage VE Instruction manual kyosho/rage-ve-7J6.pdf 08 Jun 2023 24
4 Pro-face FP-790T Operation & user’s manual pro-face/fp-790t-747.pdf 26 May 2023 57
5 Beko D 532 A Operation & user’s manual beko/d-532-a-N97.pdf 12 Jan 2023 24 0.99 Mb
6 Arris VIP2500 Product manual arris/vip2500-MG5.pdf 04 Mar 2024 24

Similar Resources:

  • Teletype

    WorldNav 7300

    (16 pages)
    All rights reserved. No parts of this work may be reproduced inany form or by any means - graphic, electronic, or mechanical,including photocopying, recording, taping, or informationstorage and retrieval systems - without the written permissionof the publisher.Products that are referred to in this document may be eithertrademarks and/or registered trademarks …
  • Lowrance

    M56i S/Map

    (8 pages)
    1Pub. 988-0152-051Addendum IAdditional Instructions forLowrance M56i S/MAPYour sonar/GPS unit, the M56i, functions exactly like the M56 de-scribed in the manual provided (part 988-0152-021). In addition, theM56i contains a communications port for NMEA 0183 output. The in-structions for connecting data cables and setting up the communica-tions port appear in …
  • skeye.

    HW 90400

    (2 pages)
    www.skeye.comQuick Start Guideskeye.e-motionHW 90400DisplayStylusAkkuSystemInterfaceLoud SpeakerImager/CameraContact:Höft & Wessel AGSkeyeRotenburger Str. 2030659 HannoverTel. +49 511 6102-0Fax. +49 511 6102-411Mail. [email protected]. www.skeye.deServiceline. +49 511 6102-600On/OffButtonReset-TasterVersion 1.1NavigationKeyFreely allocablefunction keysL …
  • Harman Kardon

    ABH 4000

    (2 pages)
    IntroductionThank you for choosing Harman Kardon! The ABH 4000 Expansion Hubwill enable you to extend the capabilities of an A-BUS®-based multiroomsystem to four zones and up to eight or more rooms,with a Harman Kardon®AB 2 amplified module as the control point.A few simple connections to aHarman Kardon A-BUS-equipped product,or a source device’s multiro …
  • Whistler

    WGPX-545

    (35 pages)
    1 Whistler WGPX-545/550 WGPX-545 & WGPX-550 Hardware User Manual Turn-by-Turn GPS Receiver Note Contents of this manual and product specifications can change without notice. Rev 3 …

Comments, Questions and Opinions: