Manualios.com

Daitsu Plasma TV Owner's Manual

Daitsu Plasma TV Manual Online:

3.3, 1343 votes
Daitsu Plasma TV User Manual
Daitsu Plasma TV User Guide
Daitsu Plasma TV Online Manual

Text of Daitsu Plasma TV User Guide:

  • 4 Caution OWNER'S MANUAL Always be careful when using your the monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean on

  • Daitsu Plasma TV, 8 Important Safety Information OWNER'S MANUAL When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit. Upon completion of any service or repairs to this the monitor, ask the service technician to perform safety checks to determine that the monitor is in a safe operating condition. If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and wil

  • Daitsu Plasma TV, 22 Connecting the PC [ D-Sub & DVI ] OWNER'S MANUAL Connecting a PC to the monitor Connect a PC (15pin) video cable between the video output port on the PC and the PC port on the monitor. Pin Configuration 15pin signal cable (based on protruded pin). To watch the PC screen Turn on the monitor and press Input button to select the PC mode. Turn on the PC and check for the PC requirement. Adjust the PC screen in Geometry menu. (See 38 page.) 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved Sync Grounding Grounding D

  • Daitsu Plasma TV, Setting the Picture 35 OWNER'S MANUAL Your the monitor has 5 screen temperatures (colour settings). Press Menu/Set button to display the main OSD menu. Select the Picture main menu. Press Menu/Set button to enter the picture menu. Select Temperature and press Menu/Set button to enter the sub menu. Then the picture-temperature sub menu appear. Select the Temperature mode with PG+/PG- button and press Menu/Set button. Press Back button to return. Cool 1, 2 Screen seems cool: Strong Blue. Normal Normal: Factory default. Warm 1, 2 Screen seems warm: Strong Red. This function automatically filters out and reduces the image noise and impr

  • Installation 17 OWNER'S MANUAL • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect t he positive " + " wire to the " + " input and the negative " - " wire to the " - " input. Connect left monitor input to left spe

  • Daitsu Plasma TV, 40 Setting the Sound OWNER'S MANUAL In Sound menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. This control allows you to adjust the balance of the left and right speaker output. Press Menu/Set button to display the main OSD menu. Select the Sound main menu. Press Menu/Set button to enter the sub menu. Select Balance and press Menu/Set button. Adjust the Balance with VOL+/VOL- button and press Menu/Set button. Your the monitor has four automatic sound settings (Standard, Movie, Music and News) that are preset at the factory. You can activate either Standard, Movie, Music,

  • Daitsu Plasma TV, 24 Basic Operation OWNER'S MANUAL Press the Power button on the remote control. The monitor will turn on and you will be ready to use its features. You can also use the Power button on the front panel. Press INPUT button on the remote control. Then you can see the source list menu shown as below. Connect the signal source (TV antenna) to TV input. Press INPUT button on the remote control and select TV on the source list. Use PG+/PG- button or numeric button to change TV programme you want. Press Pre.PG button on the remote control to watch the previous programme. Also, you can tune the cable service, provided programmes wh

  • Daitsu Plasma TV, 52 OWNER'S MANUAL Specification Notice : *Model : HP-4200B / **Model : HP-4250B Display Size Display Mode Pixel Format Contrast Ratio Brightness Resolution (RGB) PIP Input Compatible Video Tuner Module Programming HDTV Input Color Temperature Dimension/Weight Main Only With Stand With Stand and Speaker Miscellaneous Audio External Control Power Consumption Input Power Power Consumption Connectivity TV Input SCART 1, 2 Input Composite Input/Output Component 1, 2 Input S-Video Input PC Input DVI Input Audio In/Output Speaker Output External Control Port 42-Inch 16 : 9 Diagonal Screen Variable 4 Modes (4:3 Mode / 16:9 X 3 Modes) 852 X 480 Physical

  • Daitsu Plasma TV, Edit Favorite Programme List You can store of your favorite channels for each available input source (such as TV or CATV). Then, when you press the Favorite button on the remote control, the monitor display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. Press Menu/Set button to display the main OSD menu. Select the TV main menu. Press Menu/Set button to enter the sub menu. Select Edit and press the Menu/Set button. Then you can see the favorite programme list. You can select a programme with PG+/PG- button on the remote control. To Edit the List You can INSERT, ERASE,

  • Daitsu Plasma TV, Important Safety Information 5 OWNER'S MANUAL Follow all operating and use instructions. Do not use the monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. When installing the monitor on a table, be careful not to place it too close to the edge of the table. - This may cause the monitor to fall, causing serious injury to a child or adult, and serious damage to the monitor. Unplug the monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaner

  • Daitsu Plasma TV, 2 Contents OWNER'S MANUAL Setting the Picture Changing the Screen Form ...................................................................................................... 36 Selecting the Black Enhancer ................................................................................................ 37 Adjusting the PC Screen (Geometry) ...................................................................................... 38 - Native Mode ...................................................................................................................................... 39 Setting the Sound Adjusting the Sound Balance .............................................................

  • Daitsu Plasma TV, • Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the component jacks on the monitor. • Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the component jacks on the monitor. Turn on the DVD player. Press INPUT button on the remote control of the monitor and select Component 1 or Component 2. Component Input Ports You can get better picture quality if you connect DVD player with component input sockets as below. 20 Connecting the DVD OWNER'S MANUAL Connecting the DVD 1 2 How to Use 480i/60Hz 480p/60Hz 576i/50Hz 576p/50Hz 720p/50Hz 720p/60Hz

  • Daitsu Plasma TV, 55 OWNER'S MANUAL Specification Display Size Display Mode Pixel Format Contrast Ratio Brightness Resolution (RGB) PIP Input Compatible Video Tuner Module Programming HDTV Input Color temperature Dimension/Weight Main Only With Stand With Stand and Speaker Miscellaneous Audio External Control Power Consumption Input Power Power Consumption Connectivity TV Input SCART 1, 2 Input Composite Input/Output Component 1, 2 Input S-Video Input PC Input DVI Input Audio In/Output Speaker Output External Control Port 63-Inch 16 : 9 Diagonal Screen Variable

  • Daitsu Plasma TV, Viewing the Control Panel 9 OWNER'S MANUAL Select the signal source from multiple input sources such as TV, SCART 1, SCART 2, S-Video/AV, Component 1, Component 2, PC and DVI. To change the CHANNEL, press  button first and change the channel with  ,  buttons. To change the VOLUME, press  button first and change the volume with  ,  buttons. Turn the monitor on and off. OSD Button Position OSD Button Function INPUT SELECT VOL/CH  Power ON/OFF Front Panel Remote Control Handset Power Cord Alkaline Batteries Owner's Manua

  • Displayable Monitor Specification 23 OWNER'S MANUAL • Synchronization input form : separate •T he monitor recognizes 640 x 480 @60Hz signal as 480p DTV signal. So the signal is expanded, please try other signals like 640 x 480 @75Hz. • The monitor operates abnormally if a non-standard video format is selected. • 852 X 480 : 42" (SD) Native res

  • Daitsu Plasma TV, 42 Setting the Sound OWNER'S MANUAL Select sound signal format from the input source. There are Mono, Stereo, Language A, Language B, Language AB sound formats. Press Menu/Set button to display the main OSD menu. Select the Sound main menu with PG+/PG- button on the remote control. Press Menu/Set button to enter the sub menu. Select MTS and press Menu/Set button to enter the sub menu. Then the MTS sub menu appear. Select the MTS format with PG+/PG- and press Menu/Set button. • NICAM : A Digital stereo sound format for analog TV from BBC. If a channel transmit NICAM sound signal, you can hear high quality digital stereo sound. The monitor

  • Daitsu Plasma TV, Setting the Others 47 OWNER'S MANUAL Burn Clear in Advanced This function will be used for removing sticking image on the screen. Select Burn Clear and press VOL+ button to enter the ¥parts. Then the cursor moves into the ¥parts. Turn the function on or off with PG+/PG- button and press Back button. Setting the Blue Screen Mode You can set to display blue-colour screen instead of noise screen. Select Blue Back and press VOL+ button to enter the ¥parts. Then the cursor moves into the ¥parts. Turn the function on or off with PG+/PG- b

  • Daitsu Plasma TV, Connect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. Use PG+/PG- button or numeric button to change TV programme for your programme selection. Press Pre.PG button on the remote control to tune the previous programme. Also, you can tune to cable service provided programmes using the cable box. For further information regarding cable TV service, contact cable TV service provider(s). This signal of SCART 2 port takes first priority over other input signals. When an

  • Daitsu Plasma TV, 36 Setting the Picture OWNER'S MANUAL This mode is in order to watch a movie composed of 24 frames smoothly when the movie is converted to 30 frames on TV. Press Menu/Set button to display the main OSD menu. Select the picture main menu item. Press Menu/Set button to enter the sub menu. Select Film Mode and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts. Turn on or off Film Mode function with PG+/PG- button and press Back button. Your the monitor has four screen forms: 16:9, Panorama, Zoom1, Zoom2, 4:3.

  • Viewing the Connecting Panel 11 OWNER'S MANUAL 2 3 5 4 6 7 8 3 2 5 4 6 PC Monitor Audio Input Video Input Video Input S-Video Input Component Video Input Analog RGB Input Digital Video Input RCA Pin Jack 21 Pin Euro AV (SCART) 21 Pin Euro AV (SCART) Mini Din 4Pin RCA Pin Jack Mini D-Sub 15Pin DVI-D 24Pin • Cables connecting the PC vary according to the type of machine, so consult your

  • Daitsu Plasma TV, 32 Setting the Picture OWNER'S MANUAL Your the monitor has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose Standard, Vivid or Mild by pressing PICTURE button on the remote control (or by making a selection from the menu). Or you can select User which automatically recalls your personalized picture settings. Press Menu/Set button to display the main OSD menu. Select the Picture main menu. Press Menu/Set button to enter the sub menu. Select Mode and press Menu/Set button to enter the sub menu. Then the picture sub mode appear. Select the picture mode and press Menu/Set button. You wil

  • Daitsu Plasma TV, 10 Viewing the Connecting Panel OWNER'S MANUAL RS-232C DVI D-Sub (PC), DVI Sound D-Sub (PC) Component 1, 2 Component Sound Speakers SCART 1 (Euro connector) SCART 2 (Euro connector) S-Video AV Output AV Input TV Antenna AC Power Back Panel and Jacks 1 2 3 4 5 6 7 8 9 11 12 13 14 10 • Refer to the next page for port descriptions. To Control from PC For PC, Set Top Box PC/DVI Audio Input For PC, Set Top Box For DVD, Set Top Box For Component Audio Input To Connect Speakers (2CH, Stereo) For VCR, DVD, Set Top Box For VCR, DVD, Set Top Box For DVD, Set Top Box, S-VHS To Connect other TV or Monitor For VCR, DVD, Set

  • Daitsu Plasma TV, 50 OWNER'S MANUAL This the monitor can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the monitor's clock as described previously. Press Menu/Set button to display the main OSD menu. Select the Time main menu with PG+/PG- button on the remote control. Press Menu/Set button to enter the sub menu. Select Off Time with PG+/PG- button on the remote control and press VOL+ button. Move the cursor with VOL+/VOL- button and adjust time with PG+/PG- button. Y

  • Daitsu Plasma TV, You can switch on and off teletext function by pressing TEXT button on remote control. The user guide displays four fields - red, green, yellow and blue - at the bottom of the screen. The yellow field denotes the next group and the blue field denotes next block. Block/Group/Page Selection - With the blue button you can move block to block. - Use the yellow button to proceed to the next group with automatic overflow to the next group. - With the green button, you can go to the next exiting page. (Use PG+ button as alternate). - With the red button, you can go to the previous page. (Use PG- button as alternate) You can go

  • Daitsu Plasma TV, Contents 1 OWNER'S MANUAL Foreword Caution ...................................................................................................................................... 3 Important Safety Information .................................................................................................. 5 Overviewing the Monitor Viewing the Control Panel ........................................................................................................ 9 Viewing the Connecting Panel .......................................

  • Daitsu Plasma TV, 34 Setting the Picture OWNER'S MANUAL Contrast Adjust brightness difference between bright part of the screen and dark part. Brightness Adjust brightness of the screen. Color Adjust deep and light colour of the screen. Sharpness Adjust vividness of the screen. Distinct Vague Dark Bright Decrease Increase Less sharp Sharp

  • 12 Viewing the Remote Control OWNER'S MANUAL Power Turn the monitor on and off. Mute Temporarily cut the sound and restore it. Pre.PG Turn to the previous programme or exit OSD. V.Size Choose the Screen Form. 16:9 ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3 Favorite Tune to your next favorite programme. TEXT Teletext ON/OFF. TTX ➔ TTX/MIX ➔ Normal (TTX off) INPUT Display the input so

  • Daitsu Plasma TV, 51 OWNER'S MANUAL Troubleshooting If your monitor is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Quick Action for Possible SolutionProblem No picture & no sound Picture ok & no sound The remote control doesn't work Digital broadcasting screen problem No or poor color or poor picture The image is too light or too dark The image is too large or too small No output from one of the speakers • Check whether the monitor is turned on. • Power cord inserted into wall outlet? �

  • Daitsu Plasma TV, 53 OWNER'S MANUAL Specification Notice : Model : HP-4210B / Model : HP-4220B Display Size Display Mode Pixel Format Contrast Ratio Brightness Resolution (RGB) PIP Input Compatible Video Tuner Module Programming HDTV Input Color Temperature Dimension/Weight Main Only With Stand With Stand and Speaker Miscellaneous Audio External Control Power Consumption Input Power Power Consumption Connectivity TV Input SCART 1, 2 Input Composite Input/Output Component 1, 2 Input S-Video Input PC Input DVI Input Audio In/Output Speaker Output External Control Port 42-Inch 16 : 9 Diagonal Screen Variable 4 Modes (4:3 Mode / 16:9 X 3 Modes) 852 X 480 Physic

Related Products and Documents (Plasma TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kobra C-150 Operating instructions manual kobra/c-150-LMT.pdf 11 Aug 2022 6
2 Clavia Nord Lead A1 Operation & user’s manual clavia/nord-lead-a1-AIC.pdf 22 Sep 2022 40
3 Cisco MGX 8850 Installation and configuration manual cisco/mgx-8850-XB9.pdf 06 May 2023 4 0.18 Mb
4 Sangean WR-2 Datasheet sangean/wr-2-3GE.pdf 08 Mar 2023 1 0.03 Mb
5 Dell Inspiron 14 5000 Series Quick start manual dell/inspiron-14-5000-series-56K.pdf 30 Jun 2022 2
6 LIVARNO LAH 55 A1 Operating instructions manual livarno/lah-55-a1-35S.pdf 27 Dec 2023 72

Similar Resources:

  • Samsung

    PN50A550S1F

    (12 pages)
    English - 1Rear & Side Panel JacksPN50A550S1F/PN58A550S1F1-800-SAMSUNG (7267864)Samsung Electronics America, Inc.105 Challenger Road Ridgefield Park, NJ 07660-0511Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Call center hours of operation (Mon-Sun 9AM-12AM EST).To register this product please visitwww.s …
  • Hitachi

    P50S601 - 50" Plasma TV

    (142 pages)
    PLASMA TELEVISIONOperating Guide for P50S601IMPORTANT SAFETY INSTRUCTIONS.......................................................................................2-3FIRST TIME USE ......................................................................................................................... 4-21THE REMOTE CONTROL...................................... …
  • Samsung

    Series 4+ 450

    (81 pages)
    © 2010 Samsung Electronics Co., Ltd. All rights reserved.Plasma TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________ Serial No. _____________BN68-02795A-01Contact SAMSUNG WORLDWIDEIf you have any questions or comments …
  • Samsung

    UN46F5500AF

    (2 pages)
    BN68-05028A-00 QUICK START GUIDE Welcome to your new Smart TV! The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below. Included in this box Remote Control Stand Parts and Cables Remote Control Cable manager Stand Mount IR extender Power cord x 2 Batteries …
  • LG

    PM47 series

    (243 pages)
      � …
  • Samsung

    Plasma TV 4 Series

    (158 pages)
    imagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/registerModel Serial No. BN68-02011C-00BN68-02011CPlasma TVuser manualContact SAMSUNG WORLD-WIDEIf you have any questions or comments relating to Samsung products …

Comments, Questions and Opinions: