Manualios.com

D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

  • DSN-3400-10 - xStack Storage Area Network Array Hard Drive Carrying Case
  • map/jXDowIocg
  • Hardware Reference Manual
  • PDF / Adobe Acrobat Reader
  • 42

D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive Manual Online:

4.9, 2824 votes
D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive User Manual
D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive User Guide
D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive Online Manual

Text of D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive User Guide:

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide 25 3.4 Connecting to the iSCSI Data Ports The following sections describe how to connect the DSN-3000 series data ports. If you have the DSN-3200 storage system, follow the instructions in section 3.4.1. If you have the DSN- 3400 storage system, follow the instructions in section 3.4.2. 3.4.1 Connecting to the DSN-3200 Host Network Connection Ports The DSN-3200 storage system has eight RJ-45 data ports. These ports connect to your SAN using either a straight-through or cross-over RJ-45 Ethernet cable (the DSN-3200 storage system auto-senses the type of cable used). One cable is needed for each RJ-45 data port.

  • DSN-3000 series Hardware Reference Guide 15 2.2.1 Switches The rear panel of the xStack Storage unit enclosure has two switches as shown in Figure 2-3. Table 2-3 identifies the switches and their function. Figure 2-3 Power and Reset Switches Table 2-3 Power and Reset Switches Function Switch Description Power Applies power to the xStack Storage Array. P

  • ii © 2008 D-Link Networks, Inc. All Rights Reserved D-Link Systems, Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. D-Link Systems, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with t

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 36 Appendix A Replacing and Upgrading FRUs 3. Place new hard drive in tray as shown in Figure A-11. Figure A-11 Place Hard Drive in Tray 4. Align the mounting holes and insert four mounting screws to hold the drive securely in the drive tray as shown in Figure A-12. Figure A-12 Secure the Hard Drive in the Drive Tray

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide 29 Appendix A Replacing and Upgrading FRUs This appendix describes how to replace or upgrade the Field Replaceable Units (FRUs) in your xStack Storage Array. FRUs that can be replaced or upgraded include:  Battery Pack  System and buffer memory  SATA drives  Fans  Power supplies A.1 Installing the Battery Pack The xStack Storage Array accommodates a 4-cell or 6-cell shrink-wrapped battery pack. Because write-back caching is always enabled, we reco

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide 17 In addition, the management port has two bicolor LED indicators that show the activity/link and speed for this port. Table 2-5 describes the management port LEDs and Figure 2-5 shows their location. Table 2-5 Management Port LED Indicators on the xStack Storage DSN-3200 Enclosure Color Description Green ON Link is operational. Green Blinking Data is being transmitted or received on the RJ-45 port. Yellow OFF Connection has been established at 10 Mbps. Yellow ON Connection has been established at 100 Mbps. Figure 2-5 Management Port LED Locations

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide 21 Chapter 3 Installing the DSN-3000 series Storage System This chapter describes how to install the DSN-3000 series storage system. The topics covered in this chapter are:  Section 3.1, Site Considerations  Section3.2, Unpacking the DSN-3000 Series Storage System  Section 3.3, Items Supplied by the User  Section3.4, Connecting to the iSCSI Data Ports  Section 3.5, Connecting to the Management Port  Section 3.6, Connecting the Power Cords  Section 3.7, Powering-on the DSN-3000 series

  • DSN-3000 series Hardware Reference Guide 39 A.4 Replacing a Fan The xStack Storage Array contains three user replaceable fans. They can be replaced as follows. 1. Locate the failed fan. They can be identified by their green handle as seen in Figure A- 16. Figure A-16 A User Replaceable Fan with Green Handle 2. Lift the handle, grasp it and pull

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide v Preface This document is intended to assist users with installing the xStack Storage system from D- Link. This document assumes that users are computer literate, familiar with Storage Array Products, and have a basic understanding of storage products and concepts. Typographic Conventions Notes Notes provide information that deserves special attention. They are preceded by: Cautions Cautions contain information which, if not followed, can cause damage to the xStack storage system. They are preceded by: Warnings Warnings contain

  • 40 Appendix A Replacing and Upgrading FRUs 3. Remove the fan from its socket as seen in Figure A-18. Figure A-18 Remove the Fan 4. Insert the new fan by reversing the previous steps. i.e. Insert fan into socket, press firmly downwards until it is seated and lower the handle to lock it in place.

  • DSN-3000 series Hardware Reference Guide vii Contents Chapter 1 Introduction..................................................................................................................................9 1.1 Model .............................................................................................. 9 1.2 Benefits and Features .....

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 42 Appendix A Replacing and Upgrading FRUs 3. Remove the power supply module as shown in Figure A-21. Figure A-21 Remove the Power Supply Module 4. Insert the new power supply module by reversing the previous steps. i.e. Insert the new power supply module into the bay until it seats against the rear and the lever locks. Then screw the locking bolt into place.

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 10 Chapter 1 Introduction 1.2 Benefits and Features  High-performance, low-latency iSCSI storage system, with a highly integrated, reliable, multifunction ASIC for fully featured, integrated storage virtualization  Modular design with expansion up to 15 SATA disk drives  Easy setup and configuration – can be placed anywhere on a 10BaseT, 100BaseT, or Gigabit Ethernet network for improved access to critical information  In-band or out-of-band management via a direct connection or the We

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 32 Appendix A Replacing and Upgrading FRUs A.2 Installing Memory The xStack Storage Array provides four memory sockets:  Two sockets (J36 and J37) are for buffer/cache memory  Two sockets (J38 and J39) are for system memory System Memory: The xStack Storage controller can address up to 2GB of system memory, but only 512MB are required for operation of your controller. Your controller will have come standard with at least 512MB (2 x 256MB modules) making upgrading of system memory not necessary. Please see Figure A-6 system memory location. Buffer (Cache) Memory: The xStack Storage controller can

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 24 Chapter 3 Installing the DSN-3000 series Storage System 3.3 Items Supplied by the User Table 3-1 lists the additional items you must supply to perform the DSN-3000 series storage system installation. All users must provide the items in the first row of Table 3-1. Thereafter, the additional items required for installation depend on the user category into which you fit. Table 3-1. User-Supplied Items to Perform the DSN-3000 series Storage System Installation User Category User-Supplied Items All Users  A PC with a Network Interface Card

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 30 Appendix A Replacing and Upgrading FRUs 2. Press the battery down firmly as shown in Figure A-2 until you feel it lock into place. Figure A-2 Press the Battery Down Firmly Until it Locks 3. Align the battery plug with connector J35 as shown in Figure A-3 and insert it fully into the socket. Figure A-3 Align the Battery Plug with Connector J35

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, vi Contents Contact Information You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone Please see our support site for current number:  http://support.dlink.com  Monday to Friday 8:00am – 5:00pm PST/PDT D-Link Technica

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide 11 Chapter 2 DSN-3000 series Layout This chapter describes the hardware components on the DSN-3000 series storage system. The topics covered in this chapter are:  Section 2.1, Front Panel Components  Section 2.2, Back Panel Components  Section 2.3, Side and Bottom Panel Components

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, DSN-3000 series Hardware Reference Guide 41 A.5 Replacing a Power Supply The xStack Storage Array contains three user replaceable power supply modules. They can be replaced as follows. 1. Locate the failed power supply module. Unscrew the bolt holding the locking mechanism in place as shown in Figure A-19. Figure A-19 Unscrew the Bolt Holding the Locking Mechanism 2. Push the locking lever to the left and pull on the handle as shown in Figure A-20. Figure A-20 Push the Locking Lever to the Left and Pull Handle

  • D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive, 22 Chapter 3 Installing the DSN-3000 series Storage System 3.1 Site Considerations The site where you install the DSN-3000 series storage system can affect its performance. Therefore, choose a site that conforms to the requirements in the following sections. 3.1.1 General Considerations Observe the following considerations when selecting a location to install the DSN-3000 series storage system.  The location should be fairly cool and dry for the acceptable temperature and humidity ranges.  The location should be free o

Related Products and Documents (Carrying Case):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Tanda TX7210 Installation and operation manual tanda/tx7210-M8Q.pdf 27 May 2023 11
2 Xerox 8200B - Phaser Color Solid Ink Printer Installation xerox/8200b-phaser-color-solid-ink-printer-ECU.pdf 29 Sep 2023 1 0.66 Mb
3 Shell Solar SP150-L Installation manual shell-solar/sp150-l-42U.pdf 01 Jul 2023 16
4 Trueshopping BX1-B Instruction manual trueshopping/bx1-b-5RK.pdf 04 Jan 2024 11
5 DigiTech XC-0383 Operation & user’s manual digitech/xc-0383-V7Y.pdf 22 Nov 2022 6
6 RCS TR16 Installation and operation manual rcs/tr16-594.pdf 01 Oct 2023 21

Similar Resources:

  • Hypertec

    CD wallet TANCD3HY

    (1 pages)
    Tech air 16 Capacity CD wallet 3 Hypertec Ltd 2 Swangate, Charnham Park, Hungerford, Berks, RG170YX, UK. t 0870 243 5603 f 0870 243 5604 www.hypertec.co.uk TechAir® is a patented technology. Patent Nos GB 2 311 512, GB 2 340 484, US 5 884 768 and EP 0 797 939 Tech air 16 Capacity CD wallet 3 Lightweight and compact, tech air� …
  • Hypertec

    BacPac Broker N9608NHY

    (1 pages)
    A notebook backpack with a business lookWith its professional look the ergonomic BacPac Broker is the ultimate business alternative to a sporty notebook backpack. The unusual form as well as its black & silver grey colour combination make it extremely attractive. The spacious document compartment offers room for documents, power supply units, and other …
  • BASETech

    1713923

    (4 pages)
    Bedienelemente1 2 3 4 56 71 Haltegriff2 Schlossüberwurf3 Schlosskörper4 Zahlenräder5 Entriegelungstaste6 Schulterriemenhalterung7 KofferschnappverschlussBetrieb Entfernen Sie vor dem ersten Gebrauch die rote Lasche, die durch die Zahlenräder (4) gezogen wurde.a) Zahlenkombination wählenDie Standardzahlenkombination für Ihren Koffer ist (0-0-0). …
  • HP

    245161-B22 - 10642 42U Rack Shock Pallet

    (2 pages)
    HP Hook-and-Loop Cabling Strap Clip Rack Option Kit Installation Instructions © Copyright 2004, 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such …
  • Sony

    LCS-FDC

    (2 pages)
    3-860-842-11(1)This mark indicates that this product is a genuineaccessory for Sony video product.When purchasing Sony video products, Sonyrecommends that you purchase accessories withthis “GENUINE VIDEO ACCESSORIES” mark.Ce sigle indique qu’il s’agit d’un accessoired’origine pour les produits vidéo Sony.Lorsque vous achetez des produits vidéo …
  • Hypertec

    Z0701 (V2)

    (1 pages)
    A unique world-wide tracking system. Unique i-TRAK™ codes make your luggage and laptop unique and identifiable if you lose or forget them. Visit out our website at www.techair.co.uk to see more products from the Z range, and find out more about our unique range of tech air products with air protection. tech air , delivering unrivalled protection a …

Comments, Questions and Opinions: