Manualios.com

DeWalt DCT410-XE Instruction Manual

DeWalt DCT410-XE Manual Online:

3.3, 2277 votes
DeWalt DCT410-XE User Manual
DeWalt DCT410-XE User Guide
DeWalt DCT410-XE Online Manual

Text of DeWalt DCT410-XE User Guide:

  • DeWalt DCT410-XE, 1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 444 224 (Aust) or 0800 339 258 (NZ). SAFETY INSTRUCTIONS FOR POWER TOOLS When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place. WARNING: To reduce the risk of injury, read the instruction manual. GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings a

  • DeWalt DCT410-XE, 2 c) Prevent unintentional starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unex

  • DeWalt DCT410-XE, 3 • Replacement of the supply cord. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised DEWALT Service Centre in order to avoid a hazard. Extension Cords CAUTION: Use only extension cords that are approved by the country’s Electrical Authority. Before using extension cords, inspect them for loose or exposed wires, damaged insulation and defective fittings. Replace the cord if necessary. MINIMUM GAUGE FOR CORD SETS For Cable length (m): 7.5 15 25 30 45 60 Use Cable with

  • DeWalt DCT410-XE, 4 a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service center for recycling. WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the

  • 5 CAUTION: Burn hazard. To reduce the risk of injury, charge only DEWALT rechargeable batteries. Other types of batteries may burst causing personal injury and damage. NOTICE: Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, grinding

  • 6 Indicator Light Operation Charge Indicators Some chargers are designed to detect certain problems that can arise with battery packs. Problems are indicated by the red light flashing at a fast rate. If this occurs, re-insert battery pack into the charger. If the problem persists, try a different battery pack to determine if the charger is OK. If the new pack charge

  • DeWalt DCT410-XE, 7 Storage Recommendations 1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. 2. Long storage will not harm the battery pack or charger. Under proper conditions, they can be stored for 5 years or more. SAVE THESE INSTRUCTIONS FOR FUTURE USE COMPONENTS (Fig. 2, 3) WARNING: Never modify the tool or any part of it. Damage or personal injury could result. A G E C D B H F FIG. 2 A. 10.8V Max* Lithium Ion Battery B. Camera with LED’s C. 0.9 m (3') Camera cable D. Camera connector E. Screen F. Camera cable on/off switch / LED brightness contro

  • DeWalt DCT410-XE, 8 Photos are saved in JPG format and videos are saved as AVI. This D EWALT inspection camera is compatible with micro SD memory cards up to 16 gigabytes. Applications consist of automotive inspection, plumbing inspection, HVAC inspection or cable routing. Read the entire manual before using this inspection camera. DO NOT use in presence of flammable liquids or gases. The camera cable extension is waterproof up to the camera connector. DO NOT USE the handle set under wet conditions. The inspection camera is a professional tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use

  • 9 Camera Cable (Fig. 5) Align the camera cable with the camera connector (D). Push in and turn the connector counterclockwise (camera screen facing you) to firmly attach. D FIG. 5 To remove the camera cable, turn the connector clockwise (direction of arrow). Additional camera cable and extensions are available at additional cost. Please contact Stanley Black & Decker, 82

  • DeWalt DCT410-XE, 10 Getting Started INITIAL SETUP Language Setup 1. Press the forward or back arrow to select English. 2. Press the OK button to confirm and exit. Date and Time Setup 1. Press the forward or back arrow to highlight the field to change. 2. Press the OK button to activate the field (field turns green). 3. Press the forward or back arrow to change the activated field. 4. Press the OK button to save changes (field turns yellow). 5. Repeat above steps to change remaining fields. 6. Press the main menu button to exit. BASIC OPERATION NOTE: At any time

  • DeWalt DCT410-XE, 11 2. Press the forward or back arrow to select the Folder option. 3. Press the OK button to navigate to the next screen. 4. Press the forward or back arrow to select a dated folder. 5. Press the OK button to select the dated folder. 6. Press the forward or back arrow to select the photo or video. 7. Press the OK button to view the photo or video. 8. Press the forward or back arrow to advance to the next photo or video. 9. When finished, press the main menu button to exit. To Delete Individual Photos or Videos: 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select t

  • DeWalt DCT410-XE, 12 4. Press the forward or back arrow to select a dated folder. 5. Press the OK button to navigate to the next screen. 6. Press the forward or back arrow to select a photo or video. 7. Press the delete button. Select YES to delete the individual photo or video. 8. Press the main menu button to exit. To Delete a Photo or Video While Viewing 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Folder option. 3. Press the OK button to n

  • DeWalt DCT410-XE, 13 8. Press the delete button. Select YES to delete the individual photo or video. To Change Languages 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Language option. 3. Press the OK button to select. 4. Press the forward or back arrow to select English. 5. Press the OK button to save changes. 6. Press the main menu button to exit. To Change Date/Time 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select Date/Time option. 3. Press the OK button to navigate to the next scre

  • DeWalt DCT410-XE, 14 To Activate the Time Stamp 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Time Stamp option. 3. Press the OK button to navigate to the next screen. 4. Press the forward or back arrow to select OFF or ON. 5. Press the OK button to save changes. 6. Press the main menu button to exit. To Format Micro SD Card NOTICE: Formatting the micro SD card will erase all data. 1. Press the main menu button to show the Main Menu. 2. Press the forward or back arrow to select the Format Disk option. 3. Pre

  • 15 2. Press the forward or back arrow to select the Default Setup option. 3. Press the OK button to navigate to the next screen. 4. Press the forward or back arrow to select NO or YES. 5. Press the OK button to save changes and exit. Operating Tips • Use only DEWALT 10.8V lithium ion battery. • Ensure the DEWALT battery is in good working condition. If t

  • DeWalt DCT410-XE, 16 Repairs The charger is not serviceable. There are no serviceable parts inside the charger. To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by certified service centers or other qualified service organizations, always using identical replacement parts. ACCESSORIES WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the r

  • DeWalt DCT410-XE, Stanley Black & Decker 701 East Joppa Road, Baltimore, MD 21286 • 82 Taryn Drive, Epping, VIC 3076 Australia (APR11) Part No. N081720 DCT410-XE Copyright © 2011 DEWALT The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. Battery Output Chargers/Charge Time Nominal 240 Volts 12 Volts X Indicates that the battery pack is not compatible with that specific charger. All charge times are approximate. Actual charge time may vary. Read the instructi

Related Products and Documents (Digital Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Simmons SPM 8:2 Operation & user’s manual simmons/spm-82-743.pdf 18 May 2023 33
2 ATEN ALTUSEN SN0108 Quick start manual aten/altusen-sn0108-NZF.pdf 14 Mar 2023 1 3.03 Mb
3 Panasonic KX-FP181E Operating instructions manual panasonic/kx-fp181e-974.pdf 17 Jul 2022 94 1.99 Mb
4 Red One RO-ICTT Instructions for use red-one/ro-ictt-PMY.pdf 07 Oct 2023 3
5 Lindhaus LW30 pro Manual  lindhaus/lw30-pro-6L9.pdf 19 Nov 2022 12
6 Turcom AcoustoShock Mini TS-456 Operation & user’s manual turcom/acoustoshock-mini-ts-456-U91.pdf 19 Jan 2023 4

Similar Resources:

  • Praktica

    Luxmedia 8213 D00451

    (1 pages)
    8.0 Mega pixels digital camera with 2.5″ LTPS-TFT colour monitor (diagonal: app. 6.2cm), with 12 shooting modes, voice recording and direct connection to printer, face tracking, digital antishake, PASM-mode and SDHC-Support Focal length 6.2 - 16.6 mm Zoom 3x optical und 4x digital Focus system contrast auto focus Focus range …
  • Sony

    DSC-TX30

    (246 pages)
    Cyber-shot User GuidePrintSearchBefore UseOperating the cameraShootingViewingUseful shooting functionsUseful viewing functionsChanging settingsViewing images on a TVUsing with your computerPrintingTroubleshootingPrecautions / About this camera Contents listTop pageDSC-TX30User GuideUse this manual if you encounter any problems, or have any questions about th …
  • Nikon

    WC-E68

    (2 pages)
    WC-E68Wideangle ConverterInstruction ManualEnWeitwinkelvorsätzBedienungsanleitungDeConvertisseur grand-angleManuel d’utilisationFrConversor gran angularManual de instruccionesEsGroothoek converterGebruiksaanwijzingNlConverter grandangoloManuale istruzioniItJpワイドコンバータ使用説明書WC-E68日本語このたびはニコンデジタルカメ� …
  • Sony

    ILCE-7C

    (2 pages)
    ILCE-7C5-021-707-11(1)C:\Users\gotanda\Desktop\5021707111_GB_China\5021707111ILCE7CJE3\01GB.inddDTP data saved: 2020/06/11 10:06PDF file created: 2020/06/11 10:07Inserting the battery pack (supplied)/memory card (sold separately) into the cameraOpen the battery cover and the memory card cover, insert the battery/memory card, and close the covers.Memory c …
  • TouchTunes

    Media Player FRU

    (3 pages)
    1 of 3Included in this PackageThe following items are included in this Media Player FRU package:Media Player Device SpecificationsElectrical Specifications:Qty. Description Part #1 1- TouchTunes Media Player 700752-0011 2- HDMI male-to-male cable, 12” 300919-0122 3- Adhesive velcro pad sets, 1x2”, black 401310-0011 4- Power-over-Ethernet (PoE) Injector ( …
  • Samsung

    SCC-C4305(P)

    (19 pages)
    EPart : AB68-00509B(02)Printed in China220x Power ZoomDAY NIGHTDIGITAL COLOR CAMERA✽ Be sure to read the "Safety Precautions" in this manualto ensure correct use and operation of this product.220X POWER ZOOM WDR CAMERASCC-C4205(P)/C4305(P)DFEsIOwner’s InstructionsGebrauchsanleitungGuide d’utilisationGuía del usuarioIstruzioni per l’uso …

Comments, Questions and Opinions: