Manualios.com

D-Link DCM-200 Quick Install Manual

D-Link DCM-200 Manual Online:

3.4, 1637 votes
D-Link DCM-200 User Manual
D-Link DCM-200 User Guide
D-Link DCM-200 Online Manual

Text of D-Link DCM-200 User Guide:

  • Before you start 1 Local Cable Service If you do not have an existing cable Internet connection, contact your local cable operator to subscribe to a broadband connection. For the modem to be recognized on the network of the cable Internet provider, the following modem information will be needed:  Modem Make and Model i.e. D-Link DCM-200 �

  • 2 . Connecting The Cable Modem Continued… Connect the coaxial cable provided for the Internet connection to the jack labeled “CABLE IN” in the back of the cable modem unit. Wait 1 to 3 minutes for the link light to illuminate. If the link light does not glow, please contact your broadband cable company for further instructions. A.

  • D-Link DCM-200, 3 Connecting The Cable Modem Continued… C. The final cable modem setup will look like the figures below: Ethernet Cable Connection USB Cable Connection OR *Note: When using the USB Cable Connection, make sure the LINK light is on in front of the modem before you connect the USB type A to your computer. DO NOT CONNECT THE USB CABLE TO YOUR COMPUTER IF THE LINK LIGHT IS NOT ON.

  • 4 Verifying The Modem Status Lights Status Indicator Link Light Activity Light Power Indicator Verify the Cable Modem connections using the LED indicators  Power: On after the modem has been plugged into an AC power source.  Link: On when the connection to the cable network is established. The link light must be on

  • D-Link DCM-200, 5 Installing the USB Drivers *Note: This installation is only necessary if you are using the USB cable to connect your cable modem to the computer. Windows 98/98 SE If your PC is running Windows 98/98SE, it should detect the new hardware automatically. However, if it does not, please follow the steps below to install the necessary driver: 1. Click Start-> Settings-> Control Panel-> Add New Hardware. The following window will open: Click Next.

  • D-Link DCM-200, 6 Windows 98/98 SE Continued… Select “Search for the best driver for your device (Recommended).” and then click Next. Check (√) “CD-Rom drive” and then click Next.

  • D-Link DCM-200, 8 Windows 98/98 SE Continued… If a warning message as the following appears, insert the installation disk and click OK. Indicate the location of driver by typing a:\ in the space of “C opy files from:” Click OK to allow Windows to install the driver for your USB Cable Modem. he be e Once the necessary driver files have been copied, t following window will displayed. In the event of a version conflict, w recommend keeping all previous versions.

  • D-Link DCM-200, 9 Windows 98/98 SE Continued… Click Finish to complete the driver installation procedure. The DCM-200 is now installed. . Before you can begin using the DCM-200 USB/Ethernet Cable Modem, you must reboot your PC. Click “Yes” to proceed with this operation

  • D-Link DCM-200, 10 Windows ME (Millennium Edition) If your PC is running Windows ME, it will automatically detect the new hardware through a series of windows displayed below. Follow the steps described below to add the driver for the USB/Ethernet Cable Modem. Once the USB cable is connected to the USB interface, the following window will be displayed: Select “Automatic search for a better driver (Recommended).” and then click Next.

  • D-Link DCM-200, 11 Windows ME (Millennium Edition) Continued… The following window will appear: Once the necessary driver files have been copied, the following window will be displayed. In the event of a version conflict, we recommend keeping all previous versions. Click Finish to complete the driver installation procedure. The DCM- 200 is now installed. Please note that before you can begin using the DCM-200 USB/Ethernet Cable Modem, you must reboot your PC.

  • D-Link DCM-200, Windows 2000 If your PC is running Windows 2000, it will automatically detect the new hardware through a series of windows displayed below. Follow the steps described below to add the driver for the USB/Ethernet Cable Modem. Once the USB cable is connected to the USB interface, the following window will be displayed: Click Next. Select “Search for a suitable driver for my device (recommended)” and then click Next. 12

  • D-Link DCM-200, Windows 2000 Continued… Check (√) “CD-ROM drives” and then click Next. Click Next to allow Windows to install the driver for your DMC-200 USB/Ethernet Cable Modem. 13

  • D-Link DCM-200, Windows 2000 Continued… D-Link USB Cable Modem Click Yes to continue. 14 00 SB/Ethernet ust D-Link USB Cable Modem Click Finish to complete the driver installation procedure. The DCM-2 is now installed. Please note that before you can begin using the DCM-200 U Cable Modem, you m reboot your PC.

  • D-Link DCM-200, 15 est your Internet Connection Open the web browser to your favorite site. * Your cable service you our T provider will provide with the proper instructions on y network setup.

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Acura Embedded AcuPanel17 Specification acura-embedded/acupanel17-96L.pdf 23 Jan 2024 2 0.22 Mb
2 Sony XR-C5110R Operating instructions manual sony/xr-c5110r-X45.pdf 10 Jan 2024 100 1 Mb
3 Asus B1A Hardware reference manual asus/b1a-T75.pdf 12 Feb 2023 102 2.22 Mb
4 Ryobi RPW2400 Operator's manual ryobi/rpw2400-88A.pdf 28 Mar 2023 12 1.23 Mb
5 Technika LCD19HDID-407W Operation & user’s manual technika/lcd19hdid-407w-VG2.pdf 28 Oct 2022 31 1.3 Mb
6 Epson Artisan 1430 Start here epson/artisan-1430-N35.pdf 18 Nov 2022 4 3.35 Mb

Similar Resources:

  • Linksys

    WUSB54AG

    (2 pages)
    Model No.Product DataWirelessWUSB54AGThe easy way to connect your desktop or notebook to high-speed Wireless-A, -B, or -G networksUniversal wireless adapter connects your desktop or note-book to Wireless-A, -B, or -G networksWireless communi-cations are pro-tected by up to 128-bit data encryptionData rates up to 54Mbps when used with a USB 2.0 portEasy, no-t …
  • HP

    Compaq 2510p

    (15 pages)
    HP Compaq notebook common image white paper Introduction......................................................................................................................................... 2 System requirements and prerequisites ................................................................................................... 2 Common image preparat …
  • HP

    Vectra VL6 8

    (28 pages)
    Familiarization GuideHP Vectra VL 6/xxx series 8 PCHP Vectra VL Minitower PCHP Vectra VL Desktop PCThis guide is for experienced technicians who have already completed the HP Vectra PC family training course. It is a self-paced training guide designed to train you to repair the PC. It contains information specific only to the repair of these PCs. For informa …
  • CyberPower

    RMCARD205

    (8 pages)
    Quick Start Guide REMOTE MANAGEMENT CARD RMCARD205 RMCARD305 The Remote Management Card allows a UPS system and environmental sensor to be managed, monitored, and configured. K01-0000449-00 …
  • Boca

    BEN400IT

    (40 pages)
    1Boca’s Family ofEthernet ProductsNE2000 and NE2000+ CompatibleBOCALANcard 2000 PlusBOCALANcard 2000 Plus ComboPRODUCT CODE:BEN400ITBEN400I2Installation Guide …
  • Renesas

    E6000

    (19 pages)
    Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other th …

Comments, Questions and Opinions: