Digimerge DPZ16TO27 Instruction Manual
|
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 6/49 Fea ture s Powerful Zoom Camera & Setup Options z Image Sensor : 1/4" Double density interline transfer CCD (DPZ16WO37 model) 1/4" Super HAD color CCD (DPZ16TO27 model) z Zoom : ×27 Optical Zoom, ×12 Digital Zoom (DPZ16TO27 model) ×37 Optical Zoom, ×12 Digital Zoom (DPZ16WO37 model) z Day & Night, Privacy Mask, WDR and HLC (WDR : DPZ16WO37 model only) z SNR (Super Noise Reduction) Function z Various Focus Mode : Auto-Focus, Manual Focus, Semi-Auto Focus z Various Setup Options in OSD Menu. Powerful Pan/Tilt
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 35/49 Parking Action Setup PARKING ACTION SETUP ------------------------ PARK ENABLE OFF WAIT TIME 00:10:00 PARK ACTION HOME BACK EXIT This feature allows the camera to begin a specified action after a programmed time of inactivity. z Park Enable [ON/OFF] If Park Enable is set to ON, the camera runs an assigned function automatically if there is no PTZ command during the programmed "Wait Time".
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 20/49 Preset z Function MAX. 127 positions are programmable. The Preset number can be assigned from 1 to 128 except 95. Preset 95 is reserved for entering into OSD menu. Camera parameters such as White Balance, Auto Exposure and others can be set up independently and each preset can have its own parameter values independently from the other persets. When setting up presets with a controller, Label should be blank and "Camera Adjust" should be set to "GLOBAL" as the default. To change the parameters, enter into OSD menu. z Sett
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 33/49 WDR (Wide Dynamic Range) Setup WDR ------------------------ LIMIT MIDDLE LEVEL 50 BACK EXIT HLC (High Light Compensation) Setup HLC ------------------------ LIMIT LOW COLOR 5 BACK EXIT z Limit [LOW/MIDDLE/HIGH] z Level [0~100] OSD MENU 4 z Limit [AUTO/MANUAL] When there are too bright lights, this function blocks light sources on images to have better images. For example, when there is a car coming to a ca
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 36/49 Alarm Input Setup ALARM INPUT SETUP ------------------------ ALARM NO. 1 TYPE N.OPEN ACTION NOT USED HOLD TIME ENDLESS POST ACTION HOME BACK EXIT Defines Alarm Function. When an alarm is received, an input signal to the camera triggers the user-defined action programmed for the alarm. z Alarm No [1~3] Selects a sensor number to set up. z Type [Normal OPEN/Normal CLOSE] Selects sensor operation type. z Action [NOT USED/PRESET/PATTERN/SWING/GROUP] Selects an action to run when a sensor signal is input. z Hold Time [ENDLESS / 1~59 SEC. / 1~180 MIN.] Sets the time peri
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 29/49 Camera Setup ZOOM CAMERA SETUP ------------------------ FOCUS MODE SEMIAUTO DIGITAL ZOOM ON IMAGE FLIP OFF SHARPNESS 16 STABILIZATION OFF <WHITE BALANCE SETUP> <AUTO EXPOSURE SETUP> BACK EXIT Sets the general functions of zoom camera module. z Focus Mode [AUTO/MANUAL/SEMIAUTO] Sets camera Focus mode. { SEMIAUTO Mode This mode automatically exchanges focus modes between Manual Focus mode and Auto Focus mode by operation. Manual Focus mod
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 8/49 Package Component Product & Accessories z Main Body & Surface Mount Bracket z Default Accessories [Main Cable, Wrench] z Accessories for The Models with Alarm In/Out Function [I/O Cable] Brackets (Optional) z Wall Mount Bracket (Optional) [Screws : Machine M5×15, Hex Lag #14×50] z Ceiling Mount Bracket (Optional) [Screws : Machine M5×15, Anchor Bolt 3/8"×70] INTRODUCTION 1
Speed Dome Camera Instruction Manual 40/49 Pattern Setup PATTERN SETUP ------------------------ PATTERN NO. 1 UNDEFINED CLR PATTERN CANCEL RUN PATTERN <EDIT PATTERN> BACK EXIT Pattern Edit EDIT PATTERN 1 ------------------------ MOVE TO START POSITION [NEAR:START /FAR:CANCEL] EDIT PATTERN 1 [NEAR
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 4/49 Caution Operating z Before using, make sure that the power supply and others are properly installed. z While operating, if any abnormal condition or malfunction is observed, stop using the product immediately and then contact your local dealer. Handling z Do not disassemble or tamper with the parts inside the product. z Do not drop or subject the product to shock and vibration as this can damage the product. z Care must be taken
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 14/49 Installation with Wall Mount Bracket (Optional) ① Make a hole whose diameter is 30~40mm on the mounting surface to pass the wire(s) and cable(s) through the mounting surface. (In case of the wiring and cabling through the mounting surface only) Then prepare the wall mount bracket. Pull the wire(s) and cable(s) for the system as below. Attach the wall mount bracket to the mounting surface. (Hex Lag #14×50) ② Pull the wire(s) and cable(s) for the system as below. Wire the cable(s) to the ports. Insert the mounting hooks into the holes on the surface of the main body and turn the main bod
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 28/49 Privacy Zone Mask Area Setup EDIT MASK 1 ------------------------ MOVE TO TARGET POSITION [NEAR:SELECT/FAR:CANCEL] Privacy Zone Mask Size Setup EDIT MASK 1 ------------------------ [ :ADJUST MASK WIDTH] [ :ADJUST MASK HEIGHT] [NEAR:SAVE /FAR:CANCEL] Move your camera to an area to mask. Then a mask and the menu to adjust the mask size will be displayed. Adjusts the mask size. Use the joystick or the arrow buttons of your controller to adjust mask size. z (Left/Right) Adjusts the mask width. z (Up/Down) Adjusts the mask height. OSD MENU 4
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 10/49 DIP Switch Setup Before installing the camera, set up the DIP switch to configure the camera ID and the communication protocol. Camera ID Setup ON ON 12345678 z ID numbers of cameras are set up with binary numbers. See the examples shown below. Pin 1 2 3 4 5 6 7 8 Binary Value 1 2 4 8 16 32 64 128 ex) ID=5 on off on off off off off off ex) ID=10 off on off on off off off
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 32/49 z Shutter Speed [ESC/A.Flicker/Manual(×256~1/120000 sec)] Sets Shutter Speed. Shutter Speed is the duration of the electronic shutter. If Iris is set to Manual and Shutter Speed is set to ESC, Shutter Speed has higher priority. If Shutter Speed is set to A.Flicker, to remove Flicker, Shutter Speed should be set to 1/100 sec. for NTSC and 1/120 for PAL. z AGC [OFF/LOW/MIDDLE/HIGH/MANUAL(5~41dB)] Sets AGC. This setting enhances image brightness automatically in case that luminance level of image signal is too low. z SSNR [OFF/LOW/MIDDLE/HIGH]
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 13/49 Installation with Ceiling Mount Bracket (Optional) ① Remove the ceiling tile from the ceiling and cut a hole whose diameter is 30~40mm on the ceiling tile to pass the wire(s) and cable(s) through to the upside of the ceiling. (In case of the wiring and cabling through the mounting surface only) Then prepare the ceiling mount bracket. Pull the wire(s) for the system as below. (Anchor Bolt 3/8"×70) ② Pull the wire(s) and cable(s) for the system as below. Wire the cable(s) to the ports. Insert the mounting hooks into the holes on the surface of the main body and turn the main body. Assemble the m
Speed Dome Camera Instruction Manual 2/49 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN THE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL This lightning flash with arrowhead symbol is intended to alert the user to the presence of un-insula
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 27/49 Compass Direction Setup SET NORTH DIRECTION ------------------------ MOVE TO TARGET POSITION [NEAR:SAVE /FAR:CANCEL Privacy Zone Mask Setup PRIVACY ZONE ------------------------ MASK NO 1 UNDEFINED DISPLAY OFF CLEAR MASK CANCEL <EDIT MASK> BACK EXIT Move the camera to a target position and press NEAR button to save the direction as North. The direction is the reference direction to assign other compass directions. Privacy Zone Mask allows the user to program 8 rectangulars that can not be viewed by the operator
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 11/49 Communication Protocol Setup 1234 ON ON z Select an appropriate Protocol with the DIP switch combination. Switch Mode P0 (Pin 1) P1 (Pin 2) P2 (Pin 3) Protocol OFF OFF OFF PELCO-D, 2400 bps ON OFF OFF PELCO-D, 9600 bps OFF ON OFF PELCO-P, 4800 bps ON ON OFF PELCO-P, 9600 bps Others Reserved z Match the camera protocol with the camera protocol in the setting of your DVR or controller to control the camera. z Adjust the DIP switch after turning off the camera. If you changed the camer
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 30/49 White Balance Setup WB SETUP - GLOBAL ------------------------ WB MODE AUTO RED ADJUST --- BLUE ADJUST --- BACK EXIT z WB Mode [AUTO/MANUAL] Retains color balance over a color temperature range. In auto mode, this feature automatically processes the viewed image. In Manual mode, Red and Blue level can be set up manually. z Red Adjust [0-255] Adjusts the picture output in the red range. z Blue Adjust [0-255] Adjusts the pictur
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 17/49 Video z Use BNC coaxial cable only. Alarm Input If you want to use Alarm Input, the types of sensors must be selected in OSD menu. The sensor types are divided into Normal Open and Normal Close. If wrong sensor types are selected, alarms should be activated reversely to sensor inputs. ~ Normal Open Output Voltage is high state when sensor is activated ~ Normal Close Output Voltage is high state when sensor is not activated Relay Output Internal OUT 1 AC or DC LOAD The maximum loads are as follows. Power Type DC Power AC Power Maximum Load MAX. DC 24V, 1A MAX. AC 125V, 0.5A
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 22/49 Group z Function This function is that the camera memorizes the combination of Presets, Pattern and/or Swings sequently and runs Presets, Pattern and/or Swings repetitively. MAX. 8 sets of Group are programmable. Each group can have MAX. 20 actions which are the combination of Preset, Pattern and Swing. Preset speed can be set up and the repeat number of Pattern & Swing can be set up in Group setup. Dwell time between actions can be set up also. Preset 1 Pattern 1 Swing 1 Dwell Time Max 20
Speed Dome Camera Instruction Manual 5/49 ① Introduction Features 6 Package Components 8 Main Part Description 9 ② Installation DIP Switch Setup 10 Installation with Ceiling Mount Bracket 13 Installa
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 48/49 MECHANICAL Ceiling Mount (Optional) Wall Mount (Optional) Dome Polycarbonate Internal Polycarbonate, ABS Material External Aluminium Dome Size ∅150mm / ∅ 5.9” Dimension ∅192×265.3 mm 296×276.6 mm Weight Approx 3.2 Kg Approx 3.8Kg [Note] 1) Specification and features are subject to change without prior notice. 2) Specification and features are different by models. 3) Check the voltage and current capacity of rated power carefully. SPECIFICATIONS 5
Speed Dome Camera Instruction Manual 16/49 Power Description z Carefully check the voltage and current capacity of the rated power. The rated power is indicated in the back of main unit. z For the DC input models, be careful with the polarity of DC power. The system should be permanentally damaged by wrong DC input. z In case that the length of the po
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 45/49 Specifications CAMERA MODEL # DPZ16WO37 Video Signal Format NTSC PAL Image Sensor 1/4'' Double Density Interline Transfer CCD Total Pixels 811(H)×508(V) 410K 795(H)×596(V) 470K Effective Pixels 768(H)×494(V) 380K 752(H)×582(V) 440K Horizontal Resolution 540 TV Lines(Color), 600 TV Lines(B/W) Video Signal-to-Noise 50 dB (AGC Off) Zoom ×37 Optical Zoom, ×12 Digital Zoom Forcal Length F1.6~3.9, f=3.5~129.5mm Angle of View H : 55.5°(Wide)~1.59°(Tele) / V : 42.5°(Wide)~1.19°(Tele) Zoom Speed 2.5 sec (Wide
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 24/49 OSD Display P/T/Z Information Camera ID Alarm Information Action Title Preset Label LABEL12345 PRESET1 I:-2- O:1 CAM 1 15/4/x1/N z P/T/Z Information Displays the amount of pan from zero degree vertical, the amount of tilt from zero degree horizontal and current compass direction. Also identifies the amount of the zoom magnification. z Camera ID Displays the selected Camera ID (Address). Identfies Actions "SET PRESET xxx" When Preset xxx is memori
Digimerge DPZ16TO27, Speed Dome Camera Instruction Manual 41/49 Group Setup GROUP SETUP ------------------------ GROUP NO. 1 UNDEFINED CLEAR GROUP CANCEL RUN GROUP <EDIT GROUP> BACK EXIT Group Edit EDIT GROUP 1 ------------------------ NO ACTION ### DWELL OPT ------------------------ 1 NONE 2 NONE 3 NONE 4 NONE 5 NONE ------------------------ SAVE CANCEL [NEAR:EDIT] EDIT GROUP 1 ------------------------ NO ACTION ### DWELL OPT ------------------------ 1 NONE 2 NONE 3 NO
Digimerge DPD23D Security Camera Specification
DPD23D |
Digimerge DPV24DL Security Camera Instruction manual
DPV24DL |
Digimerge DPV24DL Security Camera Specifications
DPV24DL |
Digimerge DPZ36WO23 Security Camera Instruction manual
DPZ36WO23 |
Digimerge DHU104 Security Camera Instruction manual
DHU104 |
Digimerge DBD14 Security Camera Instruction manual
DBD14 |
Digimerge DGRT400 Security Camera Installation & user manual
DGRT400 |
Digimerge DND13TL2 Security Camera Instruction manual
DND13TL2 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Voyager | VBC-130 | Specifications | voyager/vbc-130-K89.pdf | 28 Aug 2022 | 1 | 0.54 Mb |
2 | Mustek | GP 135 | Operation & user’s manual | mustek/gp-135-727.pdf | 07 Nov 2022 | 15 | |
3 | Altronix | eFlow6N | Installation manual | altronix/eflow6n-JV5.pdf | 08 Apr 2023 | 16 | |
4 | Lindy | 32437 | Operation & user’s manual | lindy/32437-931.pdf | 07 Jan 2023 | 2 | |
5 | Lightolier | Calculite ProSpec PB2A7050 | Specification | lightolier/calculite-prospec-pb2a7050-485.pdf | 25 Jun 2022 | 2 | |
6 | M-Audio | ProKeys Sono 88 | Quick start manual | m-audio/prokeys-sono-88-179.pdf | 17 Aug 2023 | 6 |
Sony
KEY FEATURESSSC-G113AAnalog Color Fixed Cameras650 TV Line Security Camera with High SensitivityHorizontal resolution of up to 650 TV linesHigh sensitivity 0.15 lx (F1.2, 50 IRE, Color)CS mount lens*Compact design• High resolution (650 horizontal TV lines) and high sensitivity (0.15 lx, F1.2, 50IRE) achieved by an EXview HAD CCD II sensor and Sony’s ne …
SSC-G113A(2 pages) |
American Dynamics
D A T A S H E E T(*) lenses sold separatelyADCSHR series fixed cameras are the ideal choice for applications requiring 540 TVL to provide super, high resolution images and true color rendition. Depending upon the scene and lighting conditions, the camera offers AWB, AGC, AES, and BLC controls which you can set to optimize image performance. The Night-Saver …
ADCSHR2412N(2 pages) |
COMPRO
Android˙Connect an Ethernet cable between IP camera and your network switch/router. ( If you have purchased a Compro USB wireless adapter, please plug into the USB port of IP camera. ) ˙Attach the power adapter to the camera’s power connector and connect the power plug to a power outlet. ˙Make sure your smartphone is able to access the internet via your …
TN50(2 pages) |
MobileVision
Copyright © 2016 Magnadyne Corp.C128-UM Rev. A 5-12-16 WarrantyONE (1) YEAR LIMITED WARRANTYMagnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said produ …
C128(2 pages) |
ALIBI
1www.observint.comALI-BC1080E_CQ 5/12/15Installation Before installation: • Make sure that the device is in good condition and all the assembly parts are included.• Check the specication of the products for the installation environment.• Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.� …
ali-bc1080e(4 pages) |
SVAT
SVAT ELECTRONICSnow you can seeModel #:CLEARVU1www.svat.com160GB HDD Recordsup to 40 DaysCOMPLETE SYSTEM1 YEARWARRANTYManufacturer DefectsHi-Res CCDCamerasTriplex DVRw/ USB BackupWeb Ready DVR Systemw/ Integrated 7" LCD and 4 Outdoor Night Vision CCD Cameras
…
CLEARVU1(2 pages) |
Makita Power Tool AT1150APower Tool #2H1872 AT1150A, 52 |
The Opera Audio Turntable LP6.1#241M93 LP6.1: The Opera Audio Turntable Owner Documentation LP6.1, 7 |
Fisher Control Unit V250V250 (Control Unit ePDF User Manual, #JRJE21) V250, 24 |
Ferm Power Tool PRM1020PFerm PRM1020P Guide (Original instructions manual), @8H61J6 PRM1020P, 12 |
Miele Vacuum Cleaner SGDE0PDF Guide (@7198NR), Miele SGDE0 Vacuum Cleaner (21.12.2023) SGDE0, 29 |
Craftsman Lawn and Garden Equipment 917.28035Craftsman Lawn and Garden Equipment 917.28035 Operator's manual 917.28035, 64 |
AEG Washer L 71470 FLGuide: AEG L 71470 FL (6E53X6, Upd.Wed 08.2023) L 71470 FL, 68 |
Bosch Freezer KGN36XI30#683631 KGN36XI30: Bosch Freezer Owner Documentation KGN36XI30, 45 |
Profijt Meubel Indoor Furnishing RODEN DR1Profijt Meubel RODEN DR1 User Manual (Doc Type: Indoor Furnishing Assembly instruction manual) RODEN DR1, 13 |
Toshiba Remote Control RBC-AMS51E-ESInstallation manual for Toshiba RBC-AMS51E-ES Remote Control RBC-AMS51E-ES, 30 |
Philips Security Camera M100DPhilips Security Camera M100D Operation & user’s manual M100D, 14 |
Toyota Air Conditioner NLP121LToyota NLP121L Manual (Doc Type: Air Conditioner Installation manual) NLP121L, 151 |