Manualios.com

D-Link DP-300U Operation & User’s Manual

D-Link DP-300U Manual Online:

4.45, 1454 votes
D-Link DP-300U User Manual
D-Link DP-300U User Guide
D-Link DP-300U Online Manual

Text of D-Link DP-300U User Guide:

  • D-Link DP-300U, i Contents Package Contents.........................................................................................iv Contents of Package: .............................................................................iv System Requirements: ...........................................................................iv Introduction...................................................................................................1 External Features.......................................................................................... 3 Port Connectors......

  • D-Link DP-300U, 59 Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next

  • 22 SETUP > Print Server Setup The Print Server Setup screen allows you to modify the Print Server Name and Port Settings, as below shows. D-Link does not recommend changing these settings unless asked by your network administrator.

  • D-Link DP-300U, 13 5. The InstallShield Wizard starts to install the software, and the Progress bar indicates the installation is proceeding until the following window shows up. Click Finish to complete the installation. After installing the program, the application program for the print server is automatically installed to your computer, and creates a folder in StartÎ ProgramsÎ PS-Wizard.

  • D-Link DP-300U, 144 If you have not previously set this printer as the default, your computer will prompt you for a PostScript Printer Description file. Choose Select PPD. Select the appropriate printer description file for your printer. Click Open. (If your printer is not listed, click Generic to use a generic printer description.) If you wish to access this setting in the future, you can use the Setup button in the Chooser window. The selected printer will become your computer‘s default printer. You may need to choose Page Setup in any applications you have open.

  • D-Link DP-300U, 121 Setting up Printing in Mac OS X Tiger (10.4) NOTE: Mac OS printing is supported by Postscript printers only! With Mac OS X Tiger (10.4), you can use Apple Talk, Bonjour, Internet Printing Protocol (IPP), Line Printer Daemon (LPD), and HP Jet Direct-Socket printing through Print Server. Click on this icon in your Dock to open your System Preferences window as below. Click on the Network icon in System Preferences menu to view the menu below. Select the Apple Talk tab in the Network menu. Check to select the Make Apple

  • D-Link DP-300U, 16 LAN: You may also to specify dynamic or static IP address for your print server. Then click Apply button to implement the new setting. Port Information: This is the main function of the PS-Wizard for you to easily add a printer on your computer. To add a printer, click , then the following window will display.

  • D-Link DP-300U, 128 Adding an IP Printer To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP Jet Direct – Socket enabled printer, click on the IP Printer button in the Printer Browser window. Select the desired printing protocol from the Protocol drop-down menu. Type the IP Address of the printer, the name will appear in the Name field when the printer is found. The Printer Browser will indicate that it is verifying the address. If the printer is found, the Printer Browser w

  • D-Link DP-300U, 36 ADVANCED > E-Mail Notification The E-Mail Notification screen allows you to assign an e-mail address to the print server, so that your mail of the account can be printed out directly through the printer (ASCII text only). This screen also allow you choose where to send an email when the printer status changes.

  • D-Link DP-300U, 137 Select the printing protocol preferred, AppleTalk or LPR Printers using IP. In this example, AppleTalk has been selected. AppleTalk protocol: After selecting AppleTalk, the Port Names of the Print Server

  • 24 SETUP > LAN Setup The LAN Setup screen allows you configure the local network settings of print server. Please note that this section is optional and you should not need to change any of the settings here to get print server up and running. TCP/IP This field allows you to assign IP address in manual or automatic method. When you choose Manually Assign, you shoul

  • D-Link DP-300U, 56 Select Custom and click Settings. Then the follow screen will shows up, select LPR from the Protocol field. Then enter the Queue Name, which can be referred from PRINTER STATUS of the print server’s Web configuration, in the LPR Settings field. Click OK.

  • D-Link DP-300U, 11 2. Click Next> in the welcome window of InstallShield Wizard. 3. Specify the destination location by clicking the Browse… button. Otherwise, leave the default setting and click Next> to continue.

  • D-Link DP-300U, 17 The wizard provides three ways for you to select printer driver: 1. Show current installed drivers: You may select this option, “Show currently installed drivers”, to check if the same printer driver already existed for use. If not, you may try the next method. After done the selection of printer driver, click Next> button to continue. 2. Select from manufacturer list: Check this option, “Select from manufacturer list”, to manually select your printer from drop-down menus by brand and model. Click Next> to continue when you find a desired driver. If not, try the last way (Have Disk). After done t

  • D-Link DP-300U, 132 For set up Socket Printing: 1. Enter the IP address of the print server to which the printer is attached in Address field. After that, type “: 9100” for port 1, “: 9101” for port 2 or “: 9102” for port 3. 2. Keep the blank in queue field. Click Add button after done the section of printer model in the Print Using

  • D-Link DP-300U, 73 Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next At this screen, you can input a name for the printer, and then click Next

Related Products and Documents (Server):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 BMW 01 41 0 155 307 Owner's manual bmw/01-41-0-155-307-313.pdf 15 Nov 2022 203 2.17 Mb
2 Fiat 2014 Fiat 500 Operation & user’s manual fiat/2014-fiat-500-24J.pdf 16 Jul 2023 88
3 Gibson GA-5 LES PAUL Owner's manual gibson/ga-5-les-paul-4J3.pdf 18 Oct 2023 19 0.8 Mb
4 Envizen EF3D08 Operation & user’s manual envizen/ef3d08-3SZ.pdf 13 May 2023 12 0.42 Mb
5 Amigo RT Express Owner's operating manual amigo/rt-express-573.pdf 12 Dec 2022 28
6 Sharp 21E-FG1S Operation manual sharp/21e-fg1s-N6I.pdf 23 Apr 2023 29 1.9 Mb

Similar Resources:

  • IntesisBox

    Modbus TCP Server-Modbus RTU Master

    (5 pages)
    IntesisBox® Modbus TCP Server – Modbus RTU Master Doc. Rev.2 Installation Manual URLemailtelhttp://www.intesis.com [email protected] +34 938047134 1 / 5This information is subject to change without notice. …
  • XenData

    SXL-4200N

    (18 pages)
    XenData® SXL- 4200N Archive System: Getting Started & Library Operation Basics Document last updated: November 30, 2017 Getting Started The SXL-4200N Archive System consists of a XenData SX-250 Archive Server, a 45 slot LTO library with one or two IBM LTO-8 drives and accessories. The SX-250 has been preconfigured for use with the library. Please …
  • Themis

    RES-XR4-1U

    (198 pages)
    User ManualUser ManualInstallationManualInstallationManual1RU 19” Rack-Mount Rugged Enterprise ServerSupporting X9DRW, X9DBU and X9SCi MotherboardsRES-XR4-1UVers io n 1.5Pa r t Nu m b er: 119708-024 …
  • HPE

    ProLiant DL580 Gen9

    (130 pages)
    HPE ProLiant DL580 Gen9 Server User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. Part Number: 799243-002 May 201 …
  • NTI

    ENVIROMUX-MINI

    (35 pages)
    MAN061 Rev Date 7/15/2011 ENVIROMUX-MINI Mini Server Environment Monitoring System Installation and Operation Manual ENVIROMUX®Series …
  • Dell

    External OEMR R410

    (58 pages)
    PowerEdge R410 Technical Guide Energy efficient and compact, the PowerEdge R410 is designed with the performance and reliability needed for High-Performance Computing. …

Comments, Questions and Opinions: