Manualios.com

D-Link DCS-2121 - SECURICAM Network Camera Operation & User’s Manual

  • DCS-2121 - SECURICAM Network Camera Webcam
  • map/jXDowIocg
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 68

D-Link DCS-2121 - SECURICAM Network Camera Manual Online:

3.2, 945 votes
D-Link DCS-2121 - SECURICAM Network Camera User Manual
D-Link DCS-2121 - SECURICAM Network Camera User Guide
D-Link DCS-2121 - SECURICAM Network Camera Online Manual

Text of D-Link DCS-2121 - SECURICAM Network Camera User Guide:

  • D-Link DCS-2121 - SECURICAM Network Camera, 22 Using the ffdshow Now, click on ffdshow from the autorun screen. This will install the proper codecs that will allow you to playback video taken by the DCS-2121. . Click I Agree .

  • D-Link DCS-2121 - SECURICAM Network Camera, 8 Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the bottom of the DCS-2121 and attach it to your network switch or router. Connect the Power Adapter Attach the power adapter to the power jack located on the bottom of the DCS-2121 and connect the power adapter to a power outlet. After connecting the power adapter, you should see the Status LED on the front of the camera turn on. The Status LED will light red when it receives power, will light green after the camera connects to the netw

  • D-Link DCS-2121 - SECURICAM Network Camera, 43 MAINTENANCE MAINTENANCE > Device Management Here you can change the Admin password, add and manage Users, and adjust some camera settings. Admin Password Setting: This section lets you change the admin password used to log in to the camera and adjust settings. After installing the camera for the first time, it is highly recommended that you change the admin password for security purposes. New Password: Enter the new admin password to use. Retype Password: Enter the new admin password again for verification. After entering the new password again, click on the Save button to save your changes. Add User Account: User accounts allow others to log in to your camera to

  • D-Link DCS-2121 - SECURICAM Network Camera, 65 OS Support Device Windows 2000 / Windows XP / Windows Vista / 3GPP Mobile Phone Utility Windows 2000 / Windows XP / Windows Vista Physical Environment Power • 5V 2.5A switching power adapter • External AC-to-DC Switching Power Adapter • Type: USA / UK / EUR / AUS / CN Operation Temperature 0 to 40 °C (32 to 104°F) Storage Temperature - 20 to 70 °C (-4 to 158 °F) Humidity 20-80% RH non-condensing Emission (EMI), Safety & Other Certifications • FCC • IC • C-Tick • CE

  • 31 SETUP > Wireless To set up your IP camera's wireless network interface settings, enable Wireless Settings in this window first. Then continue the further configuration next. Site survey: Clicking this button will scan for available wireless networks. After scanning, you can use the dropdown box to select an available wireless network, and related information(SSID

  • D-Link DCS-2121 - SECURICAM Network Camera, 63 Audio Out Yes Reset Button Reset to factory default Dimension (WxDxH) 71.9mm x 110.0mm x 37mm (without bracket and stand) Weight DCS-2121: 281.4g (without bracket and stand) Max Power Consumption • 6W • Input: 100-240VAC, 50/60Hz • Output: 5VDC, 2.5A Networking Protocol • IPV4, ARP, TCP, UDP, ICMP • DHCP Client • NTP Client • DNS Client • DDNS Client • SMTP Client • FTP Client • HTTP Server • Samba Client • PPPoE • RTP • RTSP • RTCP • 3GPP Connectivity • 802.11b/g Wireless with WEP

  • 26 Setting up a Wireless Connection with WPS If your wireless access point or router supports push-button Wireless Protected Setup (WPS), you can quickly configure your wireless network and camera without using the camera’s web interface. After plugging the power adapter to your camera and the front status LED lights up, hold down the WPS button on the back of t

  • D-Link DCS-2121 - SECURICAM Network Camera, 29 SETUP This section allows you to further set up or change the configuration of your IP camera. SETUP > Wizard The setup wizards guide you through initial setup of your IP camera. You can use the Internet Connection Setup Wizard for initial network setup, and you can use the Motion Detection Setup Wizard to set up motion detection and snapshots. Simply follow the instructions given in each step of the wizard to quickly set up your camera. Alternatively, you can manually set up your Internet conne

  • D-Link DCS-2121 - SECURICAM Network Camera, 37 SETUP > Time and Date This option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time Zone: Select your time zone from the drop down menu. Enable Daylight Saving: If your region uses a Daylight Saving adjustment, check this checkbox. Auto Daylight Saving: This option will adjust Daylight Saving Time automatically. Set date and t

  • D-Link DCS-2121 - SECURICAM Network Camera, i Table of Contents Package Contents .......................................................................................................................................................................................................................................1 Minimum System Requirements..................................................................................................................................................................................................................2 Introduction ..............................................

  • D-Link DCS-2121 - SECURICAM Network Camera, 45 MAINTENANCE > Firmware Upgrade Here, you can see your current firmware version and you can also upgrade your firmware with a new version. Firmware upgrades are made available at support.dlink.com.tw. To upgrade your firmware, go to support.dlink.com.tw and download the latest firmware to your computer’s hard drive. Click on Browse…, select the firmware file, then click the Upload button. While the firmware is being upgraded, do not turn off your computer or camera, and do not disconnect your network c

  • D-Link DCS-2121 - SECURICAM Network Camera, 10 will be needed later. Click Next to continue. If you have not yet connected the Ethernet cable to the camera, do so now. Connect the other end of the cable to your computer or to the LAN. Click Next to continue. Click Next Click Next

  • D-Link DCS-2121 - SECURICAM Network Camera, 4 Features and Benefits  Simple to Use: The DCS-2121 is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. The DCS-2121 supports ActiveX mode for Internet Explorer. All that is required is a computer with Internet Explorer 6.0 or above.  Supports a Variety of Platforms: Supports TCP/IP networking, HTTP, and other Internet related protocols. It can also be integrated easily into other Internet/Intranet applications because of its stand

  • 57 18 Why are no images available through the Web browser? ActiveX might be disabled on your web browser. If you are viewing the images from Internet Explorer, make sure ActiveX has been enabled in the Internet Options menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer version 5 or

  • D-Link DCS-2121 - SECURICAM Network Camera, 62 Technical Specifications Video Codec MPEG-4 / MJPEG Audio Codec GSM-AMR: 8kbps, ADPCM: 8Kbps Sensor 1/4" color 1.3MP CMOS sensor SDRAM 64 Mbytes Flash Memory 8 Mbytes SD-Card Slot Supports SD Cards up to 16GB Lens 5.01mm, F2.8 LAN • 10/100BASE T port • IEEE 802.3 compliant • IEEE 802.3u compliant • Supports Full-Duplex operation • MDI/MDIX auto-negotiation • 802.3x Flow Control support for Full-Duplex mode MIC 50dB +/- 3dB, Omni-directional I/O Connector 1 Input (photo relay, active high 12V +/- 3V, dropout: 0 VDC) 1 Output (photo relay, Close circuit current: AC 70mA or

  • D-Link DCS-2121 - SECURICAM Network Camera, 15 Click the Next button to proceed with the installation of the Setup Wizard. You will be able to choose where to put the software on your computer in a menu that appears later. Read the License agreement and click Yes if you agree and want to proceed with installation. Click Next. Click Yes.

  • D-Link DCS-2121 - SECURICAM Network Camera, 51 3) Open the HTTP Port The HTTP Port option is used when multiple cameras are being installed behind a single public IP address and will be accessed remotely OR for using a port other than the default port for image viewing. For each additional camera that is installed, you must assign the appropriate Web server port for each camera to enable remote viewing. By default, port 80 (Web server port) is open. If these ports are available for use, you DO NOT have to open a second port and can proceed to the next section. If port 80 is not available (for example, if you are already using port 80 to run a Web se

  • D-Link DCS-2121 - SECURICAM Network Camera, 20 If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. This may take a few minutes. Camera setup is now complete! Wait until the Link LED on the camera turns green, then click Link to launch your Web browser and view your images.

  • 55 Frequently Asked Questions Internet Camera Features 1 What is an Internet Camera? An Internet Camera is a standalone system that connects directly to an Ethernet or Fast Ethernet network and supported by the wireless transmission based on the IEEE 802.11g standard, whereas conventional PC Cameras require connection to a powered PC to function. An Internet Cam

  • D-Link DCS-2121 - SECURICAM Network Camera, 3 Introduction Congratulations on your purchase of the DCS-2121 Megapixel Internet Camera! The DCS-2121 is a versatile and unique solution for your small office or home. Unlike a standard webcam, the DCS-2121 is a complete system with a built-in CPU and web server that transmits high quality video images for security and surveillance. The DCS-2121 can be accessed remotely, and controlled from any PC/Notebook over local network or through the Internet via a web browser. The simple installation and intuitive web-based interface

  • D-Link DCS-2121 - SECURICAM Network Camera, 24 Before using ffdshow, you must configure its properties. From your computer, please click on Start Programs ffdshow Configuration. At the ffdshow properties window, scroll to the bottom and click Miscellaneous. Be sure that Autodetect is checked and that Error resilience and Error concealment are set to “none”. Click OK and close the window.

  • D-Link DCS-2121 - SECURICAM Network Camera, 18 Using the Setup Wizard To run the Setup Wizard, click on Start Programs D-Link Setup Wizard SE. The Setup Wizard will then scan for all available cameras connected to your wired network. Each camera will appear with its MAC address, current IP address, and camera name. You can choose from the following options from the buttons on the left: Wizard: This will guide you through initial network setup of the selected camera. Search: This will refresh the list of cameras after rescanning for cameras on your wired network. Link: This will open the configuration web interface for the selected camera.

Related Products and Documents (Webcam):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Bond GSF20JD Instruction manual bond/gsf20jd-3XG.pdf 11 May 2023 18
2 Vauxhall Mokka Owner's manual vauxhall/mokka-LDC.pdf 04 Nov 2022 209 2.55 Mb
3 Volkswagen FOX 2004 Service manual volkswagen/fox-2004-NW3.pdf 18 Feb 2023 126
4 Rival FD350S CN Owner's manual rival/fd350s-cn-7PA.pdf 13 Jan 2023 14 0.79 Mb
5 Toshiba A665-S5180 Specifications toshiba/a665-s5180-288.pdf 14 Jan 2024 4 0.06 Mb
6 Creative Rhomba 256MB Operation & user’s manual creative/rhomba-256mb-TZ1.pdf 03 Dec 2023 55 0.72 Mb

Similar Resources:

  • Parrot

    MKi9100

    (17 pages)
    PARROTMKi9100Quick start guideHurtiginstallasjonsveiledningSnabb installationsguideHurtig installationsguidePikakäyttöopasΟδηγός γρήγορης εγκατάστασης …
  • Medion

    P86366

    (2 pages)
    Equipment and technical informationMEDION® P86366 (MD 88366) FULL HD WEBCAM WITH AUTOFOCUSThis information sheet is part of the user manual. Read the user manual carefully and in full. This information sheet does not replace the user manual.Read the chapter entitled “Safety” in the user manual before you start and follow the detailed instructions for se …
  • WebGate

    WebEye E10

    (68 pages)
    WebEye E10/E104 Manual Ver 1.5 WebEye E10/E104 User’s Guide * This manual is for WebEye firmware version 1.2.0. If your WebEye has the later version of firmware, please download the last updated user’s guide from WebGate’s homepage (www.webgateinc.com) WebGate Inc. System Requirements nn For WebEye • Network: 10 Base- …
  • HP

    4110

    (2 pages)
    hp officejet4110hp officejet 4110 printer/fax/scanner/copierA small, powerful all-in-one offering a range of impressive features including photo quality printingat up to 4800-optimised dpi*, 33.6 Kbps fax modem, 600 x 1200 dpi scanning and colour copies at up to 10 pages a minute.The HP Officejet 4110 is designed for home-office or small business users looki …
  • Vidyo

    HD-50

    (2 pages)
    1237[SELFVIEWMUTE,@-.:/_MANAGECONNECTStart meeting from the homepage. ARROWS / OK Use the arrow keys to navigate on-screen. The option you navigate to will be highlighted in green when activated. Press the OK key on the remote to select the option on-screen.VOLUME / MUTE / SELFVIEW / ZOOM Volume — Not applicableMute — Not applicableSelfview — Cycles t …
  • ACTi

    ACM-8511

    (12 pages)
    www.acti.com ACTi Knowledge Base Category: Installation & Configuration Note Sub-category: Streaming & Networking; Preview; Integration; Application Model: ACM-8511,ACM-82X1 Firmware: N/A Software: N/A Author: Athena.Tsai Published: 2010/04/07 Reviewed: 2010/06/25 1 How to Configure PTZ Functions Contents Introduction Functi …

Webcam Instructions:

Comments, Questions and Opinions: