Dwin DuoVision Operation & User’s Manual

Text of Dwin DuoVision User Guide:

• Dwin DuoVision, 23 Lamp Hours (for TransVision ™ 4 only) The Lamp Hours must be set to 0 when a bulb is replaced. To Reset the Lamp Hours: 1. Scroll down ▼ to highlight the Reset Tool option. 2. Use the left ◀ or right ▶ button to advance to the Reset Lamp Hours menu. 3. Use the left ◀ or right ▶ button to highlight “Yes.” 4. Press ENTER Lamp Hours Total Hours 0 Reset Total Reset Lamp Hours Highlight “Yes” and press “Enter” to reset No Yes

• Dwin DuoVision, 22 Custom Format The Digital Video Processor gives you Standard, Letterbox and Anamorphic preset formats for 480i, 480p, 580i and 580p video sources and HD (16:9) preset format for 540p, 720p and 1080i video sources. Video sources recorded in a 4:3 aspect ratio will appear with black bars along the left and right sides on the screen. To reduce or eliminate these black bars, you can use the Custom Format function. The H-Size function allows you to stretch the picture width to fill the entire display. The V-Size function allows you to expand the top and bottom of the picture to maintain the proper aspect ratio of the picture. HD video sources recorde

• Dwin DuoVision, 38 Limited Warranty Plasmaimage™ HD Series and Plasmaimage™ PRO Series Displays This warranty applies only to the first person or entity that purchases the Plas- maimage ™ HD-Series or Plasmaimage ™ PRO Series for personal or business use. The warranty period is: • One year from the date of the first customer purchase for Parts and Labor and PDP (Plasma Display Panel). DWIN Electronics shall not be liable or in any way responsible for any inci- dental or consequential damages of any kind. This warranty covers all defects in material and workmanship when shipped in its original container, with th

• 1 Table of Contents Safety Instructions .......................................................................................... 2 Cautions ...........................................................................................................4 Introduction ..................................................................................................... 5 Processor Front Pane

• Dwin DuoVision, 19 DWIN DuoVision ™ Input Video 1 Screen Saver NOTE: DWIN strongly recommends that the Screen Saver function re- main ON at all times. NOTE: The Motion Adaptive ™ Screen Saver can not prevent phosphor burn if only a partially static image is displayed. Sidebars This feature is designed to reduce the potential for phosphor burn when viewing video sources with 4:3 aspect ratio. When this function is on, the Plasmaimage ™ will display a gray sidebar on both sides of the picture. 1. To activate the Sidebar function use the left ◀ or right ▶ button to select On or Off. This feature works for 480i, 580i, 480p, 580p and computer graphic video sources. For HD video so

• Dwin DuoVision, 11 Programming URC-100 Remote Control to Operate the DuoVision™ Processor The DuoVision ™ system is shipped with two IR/RF preprogrammed/learning re- mote controls. They can be programmed to control both video displays, all other video input sources and even audio sources. The system also comes with an RF remote control “Expander” to allow complete control of the system at distances exceeding 100 feet through walls. For DuoVision ™ System comprising a TransVision ™ 4 projector and Pl

• Dwin DuoVision, 25 microscopic patterns that conflict with the equally uniform pattern in the digital image array. This creates interference, a visual artifact called a “moiré” pattern, which compromises picture quality. To eliminate light spill, a black felt border is also recommended to enhance the viewing experience. A2. Screen “Gain”: Projection screens do not generate light; they only reflect projected light. Therefore screen gain refers to relative reflectance to a reference standard. The most common reference standard is Magnesium Carbonate (MgCO3). DWIN recommends a screen “gain” of 1 to 1.3.

• Dwin DuoVision, 26 B. Mounting and Throw Distance Calculation Before starting the installation you will need to calculate the projector throw dis- tance and the ceiling to top-of-picture offset. The throw distance and the precise center of the screen are then used to determine the exact location for the physical installation of the projector. The TransVision ™ ’s zoom lens allows for a wide range of throw distance op- tions — the distance from the projector to the screen. For maximum flexibility in adjustment we recommend that, where possible, the projector be installed in the mid

• 15 Input Option All 10 video inputs may be selected either directly or through the Input menu. To select a video input directly, press the numeric button on the remote control that corresponds to the desired input: • For composite video inputs, press 1 or 2 • For S-Video inputs, press 3 or 4 • For component video inputs, press 5, or 6 • For RGB inputs, press 7 or 8 • For

• Dwin DuoVision, 3 12. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 13. Never push objects of any kind into this video equipment through cabinet slots as they may touch dangerous voltage points or short out parts that could results in a fire or electric shock. Never spill liquid of any kind on the video equipment. 14. Do not attempt to service this unit yourself as opening or removing cover may expose you to dangerous voltages or other hazards. Refer all servicing to qualifi

• 40 • damage from failure to follow instructions contained in your operating instructions; • damage from the performance of repairs by someone not authorized by DWIN Electronics; • any unit on which the serial number has been effaced, modified, or removed; • any failed lamp with a serial number that does not match the serial number associated with the projector; • a

• Dwin DuoVision, 31 2D. Connecting the TransVision ™ 4 System A. Connect AC power receptacle to a non-switched 120 VAC outlet using the power cord provided with the TransVision ™ 4 system. B. Connect the digital input to the TransVision ™ 4 processor using the circular connector of DVI cable. NOTE: The TransVision ™ 4 requires the use of a DWIN DVI cable between the Projector and the Digital Video Processor to operate correctly ! C. The IR Receiver and the Power LED are located on top of the projector. D. The POWER LED is a multi-purpose indicator: • When the LED is dark the AC power to the unit is turned off.

• 27 pictures that are free of keystone distortion, be certain to calculate the offset dis- tance before ordering screens and/or cabinetry. Although some adjustment range is available in floor mounted systems by using the adjustable feet. (2) PREPARING FOR CEILING MOUNT INSTALLATION 2A. Cable Installation The TransVision ™ 4 digital video processor sends a high defin

• Dwin DuoVision, 13 Each remote control provided with the DuoVision ™ is a universal remote control capable of controlling 8 different devices. 1. Select TV device to control the DuoVision ™ System. 2. Press ON to turn the DuoVision ™ ON. 3. Press OFF to turn the DuoVision ™ OFF. 4. Press VOLUME up ▲ or down ▼ to adjust the volume. 5. Press MUTE to turn the sound off. 6. Press MENU to display the Main menu or to return to the previous menu. 7. Use the numbered buttons for direct switching of inputs. To select a specific input, press a numbered button. 8. Press up ▲ or down ▼ to sequence through the on-screen menu options. 9. Press left ◀ or

• Dwin DuoVision, 2 Safety Instructions 1. Read and apply all of the safety and operating instructions with your video equipment. 2. Keep all safety and operating instruction for future reference. 3. Unplug this video equipment from the wall outlet before cleaning. Never use liquid or aerosol cleaners. Use only a damp cloth for cleaning. 4. Do not use any attachments or accessories not recommended by the manu- facturer as they may cause hazards. 5. Do not use this video equipment near water. Avoid placing it near a bathtub, kitchen sink, or laundry tub, in a wet basement, or near a

• 35 Projector Specifications Display Device 1280 x 720 DarkChip™ 2 DMD Number of Pixels 921,600 Screen Configuration Front or Rear throw Mounting Floor or Ceiling Zoom Range 1.26:1 Image Size 60 to 200 inch Diagonal Throw Distance 1.65 to 2.08 times Screen Width Projection Offset “Fixed” 14.4% of Picture Height + 4.5” Light Source 250 Watt VIP Lamp Lam

• Dwin DuoVision, 28 2B. Ceiling Mount Preparation Once the throw distance has been calculated and the screen installed, the next step in the installation is to locate the precise mounting position of the projector. The ceiling mount bracket must be aligned to the middle of the screen and located as close as possible to an electrical source AND a support beam. If the projector is not located properly, it is not possible to compensate for any resulting “keystone” distortion in the projected image. IMPORTANT NOT

• Dwin DuoVision, 30 Ceiling Mount Kit Installation continued 4. Mount ceiling bracket “A” to the ceiling, making certain that the “FRONT” label faces the screen. 5. Place bracket “B” inside bracket “A” and then secure the two pieces together using the four hex head screws, making certain that the “FRONT” label faces the screen. 6. Turn the projector upside down and place ceiling assembly C over the bottom of the projector, with the “FRONT” label facing toward the lens. NOTE: DO NOT AT

• 4 by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult

• Dwin DuoVision, 8 1. DIGITAL OUTPUTS (DVI ) Connect the digital video output from the DuoVision ™ processor to the projector using DWIN’s DVI-R cable . Connect the digital video output from the DuoVision ™ processor to the Plasmaim- age ™ using DWIN’s DVI-R cable and 2 foot DVI-C-2 adapter. Special Note about In-Wall Installations and Cable Lengths: A standard rectangular DVI connector is fairly large in size (approximately 2” wide) making it difficult to run through the walls. DWIN’s solution is to terminate one end of the DVI cable with a .75” circular connector that can easily run through a 1” conduit (figure 1). DWIN offers a series of un

• Dwin DuoVision, 37 Plasma Display Specifications INCLUDED ACCESSORIES • 3 Prong Power Cables for the DuoVision ™ Processor and for each Display • Two IR/RF Remote Controls (URC-100) • IR Expander MRF-100 • Owner’s Manual OPTIONAL ACCESSORIES • Replacement Lamp (TV4-Lamp) • Ceiling Mount Kit Part (CMB-2/3) • 19 inch Rack-mount Kit for Controller (RACK-1) • DVI Cables 25, 35, and 50 Foot Lengths (DVI- R-xx) • DVI Cable Extender (CE-1) • 2 Foot DVI Adapter (DVI-R-2) • Fixed 0 or 5 Degree Tilt Wall Mount (Fixed WMB) • Adjustable 15 Degree Tilt Wall Mount (Tilt WMB) Model Number HD-242 HD-250 Diagonal Screen Size 4

• Dwin DuoVision, 39 Plasmaimage™ Repair Procedure: DWIN Electronics will, at its option, either repair or replace the defect, or replace the defective product or part thereof at no charge to the owner for parts and labor covered by this limited warranty. This limited warranty does not include in-home service. In the case DWIN Electronics’ decides that the product requires factory service, you must obtain a return merchandise authorization. You are responsible for shipping charges incurred in getting your product to the factory. We will pay

• Dwin DuoVision, 17 Picture setting changes made with the Video menu are saved in memory for each of the ten video inputs. Many video sources are different enough to require this fine- adjusting and these settings will be recalled each time a video input is selected. Color Temp (for Plasmaimage ™ only) This feature selects plasma display’s color temperature to allow you to adjust the picture to suit your viewing tastes and environment. The Plasmaimage ™ is factory preset for MID color temperature to display the most natural colors. HIGH color temperature results in a brighter image, which may be appropriate for brightly lit rooms. 1. Use the left ◀ or right ▶ button to select L

• Dwin DuoVision, 14 Navigating the Control Menus Information Menu The Information menu reports the current status for Input video source and lamp hours used. The Information menu may be accessed when no other menu is dis- played on the screen. 1. To display the Information menu, press INFO button on the remote control. 2. Press EXIT on the remote to clear the screen immediately. Main Menu The Main menu offers a choice of Input selection or Format selection, and naviga- tion options to Video controls and Setup functions. 1. Press MENU to display the Main menu. 2. Scroll up ▲ or down ▼ the list to

• Dwin DuoVision, 18 Front Panel This feature selects the display to be controlled by the buttons on the front panel of the DuoVision ™ digital video processor. The front panel control buttons on the DuoVision ™ digital video processor allow manual control of one display device at a time, ideally the display within sight of the DuoVision processor. Use the left/right buttons to select Disp 1 or Disp 2. Num Buttons This feature selects between “Inputs” and “Power On” option. 1. When “Input” is selected, use the numbered buttons 0-9 for direct switching of

• Dwin DuoVision, 32 (3) FINAL ADJUSTMENTS After the physical mounting is complete, horizontal and vertical adjustments can be made to center and align the projected image to the screen. Before making these adjustments you should: 1. Turn the system On. 2. Adjust the zoom and focus. Use the On-Screen Menus to help refine focus. 3. Once on screen menus can be clearly viewed, go to Screen Setup menu. 4. Make the following horizontal and vertical adjustments to align the white field pattern to the screen. • To move image left or right, loosen both the C1 and C2 hex head screws on ceiling bracket C. To s

• Dwin DuoVision, 12 1 2 3 4 5 6 7 8 9 +10 0 ENT MODE SUB CTR REAR = SELECT AUD CD DVD AUX SAT MUTE MENU EXIT GUIDE INFO PREV CH TV VCR OFF TV VCR SHIFT CBL LIGHT DWIN ON VOL CH Quick Reference Remote Control Operation

• Dwin DuoVision, 9 3. SWITCHED +12 VDC OUTPUTS The DuoVision ™ Processor has two switched +12 VDC outlets (2.5 mm DC plug) labeled as RY1 and RY2. These outlets may be used to trigger a relay in an electric device. Each output provides 100 ma DC current. See Relay Setup menu for more details. 4. RGB INPUTS The RGBS1 and RGBS2 inputs (D-sub 15) are provided for High-Definition (480p, 580p, 720p, 1080i) sources and computer graphics with VGA, SVGA, XGA, and WXGA resolution. For computer graphics with VGA, SVGA, XGA,

Related Products and Documents (TV):

Comparable Devices:

Similar Resources:

• Philips 24 PW 9553 (2 pages) Téléviseur Couleur24 PW 9553JUILLET 1997Date d’introductionCaractéristiques Techniques100 HZ DIGITAL SCANTUBE BLACKLINE S ULTRAPLAT16/9 +AUTO 16/9NEXT VIEWPUISSANCE MUSICALE : 96 WATTSTELETEXTE 2,5 ET TELETEXTE 440 PAGES MÉMORISABLESCONNEXION VGAINCREDIBLE SURROUND …

• Samsung PS50C6900YK (4 pages) English -4 ¦ Connecting a AV deviceWRYWRWRGBRRBGYW RHD connectionDVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)Using an HDMI CableHDMI OUTDeviceUsing a Scart CableEXTWRYWRWRGBRRBGYW RHD connectionDVD / Blu-ray playerUsing an HDMI to DVI CableDVI OUTAUDIO OUTComponent connectionDVD, Blu-ray pla …

• Philips 7000 series (20 pages) 7000 seriesEN User manualID Buku Petunjuk PenggunaKO 사용 설명서MS Manual penggunaTH VI SC 用户手册TC 使用手冊 …

• Sharp LC-24LE240E Operation (44 pages) LCD COLOUR TELEVISION OPERATION MANUALENGLISH50201164SHARP ELECTRONICS (Europe) GmbHSonninstraße 3, D-20097 HamburgSHARP CORPORATIONhttp://www.sharp-eu.comLC-24LE240E …

• LG 32LB9D - - 32" LCD TV (72 pages) LCD TV PLASMA TVOWNER'S MANUALLCD TV MODEL32LB9DPLASMA TV MODELS42PB4DASOPB4DA60PB4DAPlease read this manual carefuffy before operatingyour set.Retain it for future reference.Record model number and serial number of the set.See the [abel attached on the back cover and quotethis information to your dealerwhen you require service.An extended owner's …

• LG Color Television (24 pages) Color TelevisionOWNER'S MANUALInternet Home Page : http://www.lge.comPlease read this manual carefully before operating your set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote thisinformation to your dealer when you require service. …

Comments, Questions and Opinions: