Manualios.com

Dynalink ALE800 Operation & User’s Manual

Dynalink ALE800 Manual Online:

3.35, 787 votes
Dynalink ALE800 User Manual
Dynalink ALE800 User Guide
Dynalink ALE800 Online Manual

Text of Dynalink ALE800 User Guide:

  • Dynalink ALE800, 23 Windows Uninstall Remove the USB ADSL Modem software drivers by performing the following steps. 1. From your PC desktop click Start  Programs  DSL Modem  Uninstall. 2. A message will be displayed asking you to confirm the removal of the USB ADSL modem software, click Yes. 3. A message will be displayed to remind you don’t unplug the USB cable until after the Setup Wizard has finished. Click OK. 4. A Uninstalling message will be displayed indicating the software is being removed. Software Uninstall

  • Dynalink ALE800, 14 3. A Licensing Agreement message will be displayed; click Accept. 4. The Select Service Provider window allows you to specify your DSL service provider. A list of service providers is displayed. Default values for the Type of Driver, ATM Virtual Path ID (VPI), ATM Virtual Circuit ID (VCI), Encapsulation type and Modulation type are provided for each DSL service provider listed in the window.  If your DSL service provider is listed and you would like to accept the default values, highlight t

  • Dynalink ALE800, 29 System Requirements Windows Operating Systems Windows 98, Windows 98SE, Windows ME, Windows 2000, or Windows XP 32 MB RAM Pentium-class processor (200MHz or better) 1 Universal Serial Bus (USB) port 10 MB free HD space Hardware Requirements Processor Intel-compatible 80486 or higher, including Pentium and Pentium Pro.

  • 10 Hardware Installation Install the USB ADSL Modem by following these steps with the PC running: 1. Insert the rectangular end of a USB cable into the USB port of your PC. 2. Insert the square end of the USB cable into the USB port of the USB ADSL Modem. Note: The USB cable should not be inserted until you are prompted by software installation to do so. USB ADSL Modem Hardware Insta

  • Dynalink ALE800, 24 5. A message will be displayed to remind you to unplug your modem. You may unplug the USB cable now. 6. The Reboot window will appear. Remove all disks from their drives, select Yes, reboot the computer now; and click Close to reboot. Note: The USB cable must be unplugged before the system is rebooted.

  • Dynalink ALE800, Windows Installation The software setup process for Microsoft Windows applications (XP, 2000, Me, 98 SE, and 98) is described below with operating system specific differences noted. The USB ADSL Modem should be connected to your PC prior to installing the driver software. No other Windows programs should be running on your PC during the software install process. Note: The appearance of the windows and the wording of the options may be slightly different for each operating system, but the same procedure applies. Installing the Driver Software 1. Insert the Installation CD into your CD-ROM d

  • Dynalink ALE800, 26 PPPoE for LAN Applications PPPoE is supported via third party software when implemented with a LAN driver, making the modem appear as a local area network (LAN) device to the operating system. It allows multiple computer users on an Ethernet to share a common DSL connection to the Internet. After installing the LAN driver, follow the installation instructions provided with the third party PPPoE software. The third party software will search for existing drivers. If multiple drivers are installed, s

  • Dynalink ALE800, 3 This manual contains information regarding the installation, operation, and configuration of the USB ADSL Modem. Additionally, it outlines the use of the Control Panel Application. The following chapters are included in this manual:  Overview: It offers a brief description of ADSL, protocol and device driver selection, and the features of the USB ADSL Modem.  USB ADSL Modem Hardware Installation It describes the steps for connecting the USB ADSL Modem.  Software Installation It describes the steps for installing the USB ADSL Modem drivers un

  • Dynalink ALE800, 25 Point-to-Point Protocol over Ethernet PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet to a remote site through common customer premises equipment. PPPoE can be used to have an office or building- full of users share a common DSL (Digital Subscriber Line) connection to the Internet. PPPoE combines the Point-to-Point Protocol commonly used in dialup connections, with the Ethernet protocol, which supports multiple users in a local area network. The PPP Protocol information is encapsulated within an Ethernet frame.

  • Dynalink ALE800, 7 The device driver choices are summarized in the table below: Driver Type Protocol Operating System WAN RFC 2364 RFC 2516 (not with MAC OS 9.x, nor with MAC OS X) Windows 2000 Windows XP Windows Me Windows 98 SE Windows 98 LAN RFC 1483 RFC 2516 (MAC OS X 10.1.x and above, only) Windows 2000 Windows XP Windows Me Windows 98 SE Windows 98 ATM RFC 1577 RFC 2364 RFC 2516 (Windows XP only) Windows 2000 Windows XP Windows Me Windows 98 SE

  • Dynalink ALE800, 19 Accessing Communication Settings on Windows Once the USB ADSL Modem and software have been installed, the communication settings may be easily updated by performing the following steps: 1. From your PC desktop click Start  Programs  DSL Modem  Configure. 2. The Communication Settings window will be displayed. Make the necessary changes to the VPI, VCI, Encapsulation type and/or Modulation type and click Next. 3. The system must be rebooted to have the new settings take effect, therefore the Reboot window will appear. Remove all disks from their drives, select Yes, reboot the computer now; and click Close to rebo

  • 9 Description of the front Panel LEDs LED LABEL Power (PW) LINK (LK) Color Status Green Green Green steady Power On Link Green blink N/A No Connection OFF Power Off N/A Table 1-1 Front Panel LEDs Description of the Rear Panel Connectors BACK PANEL CONNECTOR DESCRIPTION Line ADSL Port Phone RJ-11 phone connector (optional) USB USB Port Table 1-2 Back Panel Connectors

  • Dynalink ALE800, 15 a) Select the type of driver to be installed from the Select Driver Type window and click Next. b) Enter/Select the VPI, VCI, Encapsulation type and Modulation type from the Communication Settings window and click Next. Note: The encapsulation types that appear in the drop-down list vary depending upon the type of driver selected in the previous step.

  • Dynalink ALE800, 2 This manual provides a comprehensive user’s guide and installation manual for USB ADSL modem. It has been organized in a way that should make it easy to follow by users worldwide. In order to ensure optimal comprehension, the following list provides brief descriptions of the formatting styles used in this manual.  Commands: Commands are always shown as shadow words with the word “click” preceding them. For example, click Next, click OK, or click Cancel.  Names of Windows (Dialog Boxes

  • Dynalink ALE800, 6 1. WAN driver This driver causes the modem to resemble a dial-up modem. Call establishment is performed through Dial-Up Networking. This driver supports RFC 2364 and 2516 with PVC connections. It can be used with Windows 98, Windows 98 SE, Windows 2000, Windows Me, and Windows XP. 2. LAN driver This driver makes the modem appear as a LAN or Ethernet device. Connection establishment is automatic. This driver supports RFC 1483 with PVC connections. Additionally, PPPoE is supported via third-party software. This driver can be used with W

  • Dynalink ALE800, 8 Features The USB ADSL Modem provides the following features:  Compliant with Universal Serial Bus Specification Revision 1.1  USB bus-powered; an external power supply is not required  Supports three device drivers: Microsoft NDIS 4.0 WAN Miniport, NDIS 4.0 LAN Miniport or NDIS 5.0 ATM Miniport  Compatible with T1.413 i2, G.DMT, and G.lite compliant CO DSLAM equipment  Software upgradeable  ATM driver supports up to sixteen simultaneous ATM virtual connections  Includes a control panel monitoring program for configuring the adapter and checking the status of the connection on both Windows

  • Dynalink ALE800, 21 The DSL Modem Status provides a quick and easy way to configure and check the performance of the modem and the ADSL connection. When open, the monitor window updates every 2 seconds. DSL Modem Status 1. There are two methods to access the control panel:  From your PC desktop, click Start  Programs  DSL Modem  DSL or  From the PC desktop, double click the DSL Modem icon in the system tray. Note: To access the DSL Modem Status, the device driver must be running. Also, make sure the USB cable is plugged into the modem. 2. T

  • Dynalink ALE800, 12  ATM Virtual Path ID (VPI) Note: Required if not using default value  ATM Virtual Circuit ID (VCI) Note: Required if not using default value  Encapsulation type Note: Required if not using default value  Modulation type Note: Required if not using default value  User Name (for PPP applications only)  Password (for PPP applications only).

Related Products and Documents (Modem):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kramer VS-5x4 Operation & user’s manual kramer/vs-5x4-7T9.pdf 02 Dec 2022 16
2 Swisher LS12534HP Owner's manual swisher/ls12534hp-5I7.pdf 24 Oct 2023 20
3 Elta MB111 Instruction manual elta/mb111-Q2X.pdf 01 Sep 2023 23 0.41 Mb
4 Weider Weemsy7008 X2 Manual  weider/weemsy7008-x2-6FK.pdf 13 Aug 2023 25 1.1 Mb
5 Intel SSR212CC Technical product specification intel/ssr212cc-Q82.pdf 09 Dec 2022 49
6 Dell 2209WA - UltraSharp - 22" LCD Monitor Service manual dell/2209wa-ultrasharp-22-lcd-monitor-3V7.pdf 28 Mar 2023 85

Similar Resources:

  • axing

    EOC 1-31

    (4 pages)
    HerstellerAXING AG Gewerbehaus Moskau 8262 RamsenEWR-KontaktadresseBechler GmbHAm Rebberg 44 78239 RielasingenStand 2020-09-18Technische Verbesserungen, Änderungen im Design, Druckfehler und Irrtümer vorbehalten.  Beachten Sie die dem Gerät beiliegenden Sicherheitshinweise! Diese sind auch unter der folgenden Internetadresse abrufbar: https://download. …
  • O2

    930D

    (8 pages)
    o2.co.ukTelefónica O2 UK Limited, 260 Bath Road, Slough, Berks, SL1 4DX. Registered in England No.1743099. Registered office as above. © Telefónica O2 UK Limited 2008. Correct at time of going to press (10/08).O2CN734N 5665VCCP10/08 10/09We’re better, connectedQuick Start Guideø Mobile Broadband USB Modem930DO2 ODM00– JC 3mm17.10.08 130x130mm 100Cli …
  • VeriFone

    VX 680

    (2 pages)
    CARD TYPES ACCEPTED• Visa • PayPal• MasterCard • Carte Blanche• Debit Cards • Diners Club• American Express • JCB• Discover • EBTCREDIT SALE• Select SALE• Enter sale amount and press ENTER• Enter tip amount and press ENTER or press ENTER to bypass• Select YES• Swipe customer card, insert card or manually enter account numbe …
  • Multitech

    MTCBA-C-IP-N12

    (202 pages)
    Wireless CDMA Modems MultiModem® CDMA MMCModem™ CDMA SocketModem® CDMA AT Commands IP Commands Fax Commands GPS for CDMA Commands RUIM Commands SIM Toolkit for RUIM Reference Guide …
  • Data-Linc Group

    PLR5000

    (31 pages)
    USER GUIDEINDUSTRIAL DATA COMMUNICATIONSIt is essential that all instructions contained in the User Guide are followed precisely to ensure proper operation of equipment.Industrial Frequency HoppingSpread Spectrum Radio ModemPlantLinc™ 5000PLR5000 …
  • NETGEAR

    CM212

    (2 pages)
    CM212Broadband Cable ModemSpeedyReliableUncomplicatedUltra Equipped• Help is there when you need it! NETGEAR provides 24x7 technical support* in English, with selected local language support during office hours.Up to 50x Faster than Dial-Up Internet AccessNo more sitting and waiting. No more busy signals. NETGEAR's Broadband CableModem gives you an a …

Comments, Questions and Opinions: