Edimax PS-1210Un Manual 

Text of Edimax PS-1210Un User Guide:

• English Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or

• Edimax PS-1210Un, 90 8.2 Login You may use any Web Browser to review the status or configure the settings of the print server. After entering the IP address of the print server, a login page display. You have to enter correct “User Name” and “Password” before going to the Web Management pages. Notes: Default User Name is “admin”, default password is “1234”.

• Edimax PS-1210Un, 130 12. Choose to set the print whether as a default printer or not. Click “Next”. 13. You have added the network printer to the PC successfully. The information of the printer is displayed in the windows. Click “Finish”.

• 12 2. Hardware Installation Unpack the print server package and verify that all the items listed in the section 1.2 are provided. Connect the print server to the printer you want to share on the network. Connect the print server to your network by attached the network cable to the UTP port of the print server. Connect the power adapter to the print server. The print server

• Edimax PS-1210Un, 71 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you can select to enable/disable each printing or management protocol, assign name for each printer port of this print server, upgrade the new firmware for this print server, and enable/disable wireless function. Upgrade Firmware: You can use this “Upgrade Firmware” tool to update the newest firmware of the print server. Click “ ” button and select the correct firmware in your PC. After selecting th

• Edimax PS-1210Un, 117 9. IPP Printing 9.1 Introduction IPP (Internet Printing Protocol) Printing provides a convenient way of remote printing service by TCP/IP. The print server can support IPP printing by default. It is needless to do any setting. Any PC that can support IPP printing, for example Windows 2000/XP, can directly uses the print server by IP. By using the IPP printing, you can share the printer to all the PC’s that can access the print server by IP. You can even share your printer to Internet users. 9.2 System Setup 9.2.1 Print

• Edimax PS-1210Un, 42 4. Windows NT/2000/2003 Network 4.1 System Architecture In Windows network environment, other than the Peer-to- Peer network printing architecture described in the previous chapter, we also offer the Server-Based Printing architecture for Windows NT/2000/2003 server. Only one Windows NT/2000/2003 is required to have Windows PTPP (Peer-to-Peer Printing) driver installed and share the printing service on the network. Other network users can simply connect to the server and access the shared printer (see below).

• Edimax PS-1210Un, 25 2. The “Print Server Utilities” window will be displayed. Click “Next”. 3. Click “Next” to install the utilities in the default folder or click “Change” to specify the destination folder where you would like to install the utilities.

• Edimax PS-1210Un, 104 Key Length – You can choose “64-bit” to use WEP with 64-bit key length encryption or choose “128-bit” to use WEP with 128-bit key length encryption. The longer key length can provide better security but worse transmission throughput. Key Format – You may select to use ASCII Characters (alphanumeric format) or Hexadecimal digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. PassPhrase – A passphrase simplifies the WEP encryption process by automatically generating the WEP

• Edimax PS-1210Un, 76 In the Infrastructure mode, you have to let the print server associate with an access point. You let the print server scan for an available access point automatically or manually assign the SSID of the access point you want to use. If you select to let the print server scan for an available access point, the following window will pop up. The list is the scanned available access points. Select an access point in the list and click “Next”. If you cannot find the access point that you want to use, click “Scan” to let the print server scan again.

• 135 8. Select the printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. 9. Name your printer and set the default printer, click “Next”.

• Edimax PS-1210Un, 132 4. Choose “Create a new port” and select “Standard TCP/IP Port”. Click “Next”. 5. Enter the IP Address of the Print Server in the “Hostname or IP address” field. Click “Next”.

• Edimax PS-1210Un, 10.3 Standard LPR Settings in Windows Vista / 7 To configure the LPR setting in Windows Vista, please follow the steps below. 1 Click “Start”, select “Settings\Printers”. 2 Click “Add a Printer”. 3 The “Add Printer” wizard is displayed. Select “Add a local printer”. 131

• 108 8.4.3 TCP/IP You can configure the print server to automatically get IP from DHCP server or manually specify static IP. The print server also has a built-in DHCP server. You can enable this DHCP server and let it manages IP for you. If you need the print server to automatically get an IP from DHCP server, select “Enable Obtain TCP/IP Settings

• Edimax PS-1210Un, 105 WPA-PSK or WPA-NONE Security Mode: “WPA-shared key” (for an infrastructure network) or “WPA-None” (enables WPA security for your ad hoc network) requires users to set the advanced encryption methods, i.e. TKIP and enter a set of shared key. TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets. This insures much greater security than the standard WEP security.

• Edimax PS-1210Un, 121 Step6. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. Step7. Choose to set the print whether as a default printer or not. Click “Next”.

• Edimax PS-1210Un, 85 Step 2: Select to enable required printing protocol. Please refer to section 7.11 for detail information. Step 3: Setup the IP of this print server and the DHCP server. Please refer to section 7.6 for detail information.

• Edimax PS-1210Un, 6 In the client installation procedure, after PTPP (Peer-to- Peer Printing Driver) is installed into Windows, the system will automatically (manual configuration is also allowed) search all the print servers on the network, and then add their printing ports into Windows’ printing port (see below). Windows 98 PTPP Print Server MIS-2 P1 P2 P3 P1 Print Server MIS-1 UNIX / Linux UNIX (include HP/UX, SCO Unix, SunOS, Solaris, Unixware DECUnix, IBM AIX and others) and Linux use the system-standard LPR to print

• Edimax PS-1210Un, 39 5. Select “Local printer attached to this computer” and make sure that “Automatically detect and install my Plug and Play printer” is not selected. Click “Next”. 6. Choose the suitable “Print Server Network Port” which was created by the Administrator Installation or Client Installation process and click “Next”.

• Edimax PS-1210Un, 77 Ad Hoc Mode: In the Ad-Hoc mode, you can let the print server automatically associate with other wireless station or manually assign the SSID of your wireless network. You can let the print server automatically select the channel that is the same with the peer or manually assign a channel. If you select to let the print server scan for an active wireless station, the following window will pop up.

More Instructions:

	Edimax PS-1210Un Datasheet 05-12-2023 2	DOWNLOAD
	Edimax PS-1210Un Quick install manual 02-01-2024 31	DOWNLOAD
	Edimax PS-1210Un Manual  18-08-2023 1	DOWNLOAD

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• Epson Artisan 810 (327 pages) Epson Artisan 810/ Epson Stylus Photo PX810FW/TX810FW/ Epson Artisan 835/ Epson Stylus Photo PX820FWD/TX820FWD/ Epson Artisan 837/ Epson Stylus Photo PX830FWD Epson Artisan 710/ Epson Stylus Photo PX710W/TX710W/ Epson Artisan 725/ Epson Stylus Photo PX720WD/TX720WD Epson Artisan 730/ Epson Stylus Photo PX730WD/TX730WDColor Inkjet PrinterSEMF09-006SERVICE MAN …

• D-Link DP-G310 - AirPlus G Print Server (102 pages) Print Server Administration User’s Guide Print Server Administration Program User’s Guide Rev. 03 (April, 2003) …

• Xerox Phaser 8560 (6 pages) 8560 EN CZ PO HU Rev ACopyright © 2007 Xerox Corporation. All rights reserved.color printerPhaser® 8560www.xerox.com/office/8560PsupportQuick Use GuideRUELTUКраткое руководство по эксплуатацииHızlı Kullanım KılavuzuΓρήγορος οδηγός χρήσηςEN …

• Rimage Amigo II (4 pages) Replace a Recorder on a Rimage Producer II Autostar II™, Protégé II™ or Amigo II™ 112043_D © 2008, Rimage Corporation 1 Replace a Recorder on a Rimage Producer II Use this procedure to replace one or more recorders on an Autostar II™, Protégé II™ or Amigo II™. Rimage approved parts must be used for this process. The product warrant …

• Roland Soljet Pro III XJ-540 (214 pages) SERVICE NOTES70073-09Copyright © 2010 ROLAND DG CORPORATIONTERMS OF USEUsers of this Service Note shall be deemed to agree with the following Terms of Use.1. USERSThis Service Note is only for authorized persons with user ID and password issued by Roland DG Corporation. 2. PURPOSEAuthorized persons can use this Service Note only for the purposes of sellin …

• Xerox WorkCentre 3220 (4 pages) Xerox WorkCentre® 3210 / 3220 Multifunction Laser PrinterMaximized efficiency, tailored to your desktopWorkCentre®3210 / 3220 Letter-sizeBlack-and-white Multifunction Printer …

Comments, Questions and Opinions: