Manualios.com

Electrolux P6000 (Nexus) Series Service Manual

  • P6000 (Nexus) Series Laundry Appliance
  • maPrlQ31PSj3s
  • Service Manual
  • PDF / Adobe Acrobat Reader
  • 118

Electrolux P6000 (Nexus) Series Manual Online:

3.4, 1324 votes
Electrolux P6000 (Nexus) Series User Manual
Electrolux P6000 (Nexus) Series User Guide
Electrolux P6000 (Nexus) Series Online Manual

Text of Electrolux P6000 (Nexus) Series User Guide:

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 14 599 35 23-17 3.7 Detergents Modern detergents are less aggressive than those used in the past, partly for reasons of environmental protection and partly to prevent damaging the fibres. If used correctly, these offer an excellent protective treatment and a high level of washing power. Detergents that contain no phosphates are far more sensitive to the reaction with calcium. When the door of a washing machine is opened, the user will immediately observe that the interior is clean and shiny

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 51 599 35 23-17 6.9.4 Jetsystem washing machines (with circulation pump) 1. Filter body 2. Circulation pump 3. Circulation tube 4. Drain pump 1. Tube between tub and filter body 2. Pressure chamber 3. Filter body 4. Washer 5. Cap 6. Drain filter 7. Washer (OR) 8. Drain pump 9. Pump cover 10. Drain hose 11. Circulation pump 12. Circulation tube 13. Pump cover 6.9.4.1 Drain filter  The drain filter features a fine mesh which traps all objects. The filter mesh must be cleaned frequently.

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 61 599 35 23-17 8.2 Suppressor 8.2.1 General characteristics The suppressor is connected to the input of the appliances power line, and prevents radiofrequency disturbance from entering the power circuit. 8.2.2 Electrical symbols 8.2.3 Circuit diagrams 8.2.4 Checking for efficiency THE APPLIANCE GENERATES RADIOFREQUENCY DISTURBANCE: - check the efficiency of the earth circuit THE APPLIANCE IS INOPERATIVE:

  • SOI/DT 2002-05 eb 111 599 35 23-17 9.10.4 Drain pump - models with Neat cabinet (Jetsy- IZ) a. Lay the appliance face-down, remove the screws which secure the filter body and remove the filter from the base (70) b. Detach the drain hose from the pump. c. Press down the two anchor tabs and detach the pump from the filter b

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 89 599 35 23-17 8.18 NTC temperature sensor 8.18.1 General characteristics In certain models (i.e. those with hybrid or electronic timers), an NTC sensor is used to control the washing temperature. In these sensors, the internal resistance decreases as the temperature increases. This reduction in resistance is detected by the electronic control system which, when the desired temperature is reached, disconnects the heating element. Two types of sensor are produced; their shapes are different, but their characteristics are identical. NTC sensors are used in electronic washer-dryers to co

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 7 599 35 23-17 1 PURPOSE OF THIS SERVICE MANUAL The purpose of this Service Manual is to provide Service Engineers, who already have the basic knowledge necessary to repair household washing machines, with information of a general nature regarding the P6000 (Nexus) range of washing machines. More detailed information regarding specific models may be found in the Service Notes and Service Manuals (issued separately) for each specific model or functionality. This information covers:  Circuit diagrams  Time

  • SOI/DT 2002-05 eb 76 599 35 23-17 8.10.2 Reversal of direction of rotation during washing The windings are designed to provide rotation in both directions, depending on the way in which the capacitor is connected. Each functions alternately as a primary winding and start-up winding. When reverse rotation is required, the switching contact of the timer reverses the connection of the capa

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 85 599 35 23-17 8.14 Heat exchanger 8.14.1 General characteristics 1. External casing 2. Heat exchanger 3. Heating element 4. Thermostat In certain Jetsystem models, the water is heated by a heat exchanger (not recent models). The heat exchanger consists of a cylindrical body in aluminium alloy, lined with a layer of "teflon" to prevent the formation of scale. The water to be heated flows through the heat exchanger. The armoured spiral-shaped heating element is located inside the cylinder. A safety thermostat is positioned in clos

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 104 599 35 23-17 9.5.5 Detergent dispenser a. Remove the rear cabinet shell. b. Unscrew the clamp and detach the tube from the detergent dispenser to the tub c. Detach the steam venting tube from the tub (if present) d. Extract the detergent drawer (8) e. Remove the screw which secures the control panel to the detergent dispenser (9) f. Remove the screws which secure the detergent dispenser to the cross-member g. Remove the solenoid valve(s) (if fitted to the dispenser) or detach the tube(s) from the dispen

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 48 599 35 23-17 6.9 Drain/circulation circuits The drain circuit differs according to the structure of the model and the washing system used. 6.9.1 Washers with traditional washing systems 1. Tub 2. Tube between tub and filter body 3. Filter body 4. Drain pump 5. Drain hose 6. Circulation tube 1. Tube between tub and filter body 2. Pressure chamber 3. Filter body 4. Washer 5. Cap 6. Drain filter 7. Washer (OR) 8. Drain pump 9. Pump cover 10. Drain hose 11. Circulation tube 6.9.1.1 Drain filter  The drain filter features a fine mesh which traps all objects

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 101 599 35 23-17 9.4 Access from the porthole door 9.4.1 Porthole door a. Remove the two screws which secure the door to the hinge (30) b. Remove the screws which secure the surround-flange (if present) and detach the flange from the surround. c. Remove the glass door panel. d. Remove the handle-latch assembly Re-assembly: e. Position the handle assembly in its housing in the flange so that the spring exerts pressure correctly. f. Refit the glass panel to the flange. g. Replace the surround and the screws. 9.4.2 Porthole door hinge a. Remove the porthole door. b. Detach the seal front the front panel (31) c. Remove the screws which secu

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 31 599 35 23-17 6.4 Cabinet The cabinet consists of two half-shells in enamelled sheet metal, which are secured to a Carboran base. The support cross-member (in galvanized sheet metal) is screwed to the upper section of the cabinet. The work-top is screwed to the rear section of the cabinet shell. Under-counter versions are fitted with tops in galvanized sheet metal. The cabinets are available in a range of different versions that can be installed in any part of the home (bathroom, kitchen, etc.):  32cm (P66)  42/45cm (P61)  52/54cm (P65)  57/60cm (P62, without plinth)  57

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 64 599 35 23-17 8.4.2 Electrical symbol A Common contact B PTC power supply contact C Main switch contact 8.4.3 Circuit diagrams Connector 8.4.4 Version with pneumatic device (certain models only) 1. Air intake aperture 2. Membrane 3. Latch 4. Spring 5. Lever A tube connects the door delay device to the filter body. When the pressure on the membrane is greater than the force exerted by the counterspring (100 ± 30 column water mm), the latch

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 8 599 35 23-17 3 WASHING PRINCIPLES 3.1 Washing The washing of the fabrics consists of transferring the dirt from the fabrics to the water, and is achieved using the following:  detergent  mechanical action  temperature  time The washing operation comprises four phases: 1. Soaking (the fabrics must be completely soaked). 2. Dispersal of the dirt (which must be separated from the fabrics). 3. Suspension of the dirt (once removed from the fabrics, the dirt must not re-deposit, but must be held in suspensio

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 25 599 35 23-17 4.3.2 Jetsystem “DIRECT SPRAY” washing system (current production) 1. Water fill solenoid 2. Detergent dispenser 3. Tube from detergent dispenser to tub 4. Tub 5. Drum 6. Drum lifter 7. Tube between tub and filter body 8. Filter body 9. Tube between filter body/circulation pump 10. Circulation pump 11. Circulation tube 12. Door seal 13. Heating element 14. Thermostat 15. Drain pump 4.3.3 Circuit with heat exchanger (certain older models only) 1. Water fill solenoid 2. Detergent dispenser 3. Tube from detergent dispenser to tub 4. Tub 5. Drum 6. Dr

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 109 599 35 23-17 9.9 Drum lifter The drum lifter can be removed from the interior for stainless steel tubs (G10-G11-G12-G13) and the type G17-G18-G19 Carboran tubs. For type G20-G21 Carboran tubs, it is necessary to remove the drum before replacing the lifter.  Removal a. Insert a screwdriver into the following holes: ⇒ for G13 tubs, into the fourth hole in the lifter ⇒ for G10-G11-G12-G18-G19 tubs, into the third hole in the lifter ⇒ for G17 tubs, into the second hole of the lifter b. Bend the drum

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 60 599 35 23-17 8 ELECTRICAL COMPONENTS 8.1 Control systems The operation of the appliance depends on the type of control system used, since the control system governs the various operations comprising the washing cycle. Types of control systems • Electromechanical timers (F50-F51-F52-F53): the controls are actuated by the commutator contacts, which are actioned by a series of cammes. This movement is transmitted to the cammes by a synchronous motor via a series of gears and levers. • Integrated hybrid timers (VD54-VD55-VS60-VS71-VS81): These consist of two components: an electromechanical timer and a control PCB. The cont

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 115 599 35 23-17 9.12.2 Rear cabinet shell a. Remove the top b. Remove the screws which secure the shell to the base and to the control panel support c. Remove the screw which secures the fan to the shell (86) 9.12.3 Motor-Fan assembly a. Remove the rear cabinet shell b. Remove the screw which secures the fan to the control panel support (87) c. Detach the fan from the heating element casing: Ö Standard version: if present, remove the seal retaining clamp (88) and fold back the seal on the coupling between the fan a

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 73 599 35 23-17 8.9 Water distributor 8.9.1 General characteristics The water distributor is used in models with MWM electronic control systems, and performs the following functions:  It actions the levers in the detergent dispenser in order to duct water through the various compartments during the course of the washing cycle.  Drawing power from the main PCB, it powers the following components: Ö Cold water solenoid valve Ö Circulation pump Ö Drain pump 1. PCB 2. Water distributor 3. Detergent dispenser lever system The water distributor is actioned and controlled by the electronic control system. The motor of the

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 106 599 35 23-17 9.6 Washing group (Carboran-inox) a. Remove the fixing ring and detach the bellows seal from the front panel b. Remove the rear shell c. Remove the clamps from the tub suspension springs (53) d. Detach the various hoses from the tub (dispenser-tub, steam venting hose, tub-manifold etc.) e. Remove all the wiring connectors from the components fastened to the tub (motor, heating element, thermostats) and, if present, the bulb of the adjustable therm

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 74 599 35 23-17 A = Pre-wash B = Wash C = Bleach D = Conditioner Contact base Position of lever 8.9.3 Electrical symbol 8.9.4 Contact closure diagram

  • SOI/DT 2002-05 eb 103 599 35 23-17 9.5.3 Thermostat/NTC sensor a. Remove the rear cabinet shell. b. Detach the drive belt from the pulleys (if necessary). c. Detach the wiring connectors (fixed-temperature thermostats and NTC sensors) d. Remove the thermostat/sensor from the sealing ring (41). Refer to section 9.2.7 for removal of the adjustable thermostat (42). Re-as

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 41 599 35 23-17 6.7.6 Drum rotation drive belt These appliances are fitted with elastic drive belts. The motor is mounted in a fixed position, and no regulation is possible. 1. Motor pulley 2. Elastic drive belt 3. Drum pulley Different types of drive belts, produced by various manufacturers and with different characteristics, are used in production: • rubber belts (black) • plastic belts (yellow) The length marked on the drive belt (1217, 1280 etc.) is the working length based on the belt mounted on the pulleys, which

  • SOI/DT 2002-05 eb 6 599 35 23-17 9.12.5 Drying heater casing ............................................................................................................. 116 9.12.6 Drying heaters....................................................................................................................... 116 9.12.7 Drying and safety thermostats...........

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 93 599 35 23-17 8.22 Fan motor (washer-dryers) 8.22.1 General characteristics The motor which actions the air circulation fan for the drying phase is of the single-phase asynchronous type. The rotor is of the "squirrel cage" type. The velocity of the shaft is approximately 2,800 rpm at a voltage of 220-240V/50Hz. 1. Rotor 2. Stator 3. Cooling fan 4. Pulley 8.22.2 Electrical symbol 8.22.3 Checking for efficiency FAN INOPERATIVE: - Check that th

  • Electrolux P6000 (Nexus) Series, SOI/DT 2002-05 eb 59 599 35 23-17 7.3.2 Condensation water fill 1. Solenoid valve 2. Tube from Solenoid valve to Coupling 3. Coupling 4. Tube from Coupling to condenser 5. Siphon on Tube from detergent dispenser to tub The condensation water is delivered by a section of the cold water solenoid valve, whose delivery is 0.4 litres per minute. The solenoid valve is connected by a hose to a coupling; the water is ducted from this coupling to the upper section of the condenser. A small hole inside the coupling

More Instructions:

DOWNLOAD

Related Products and Documents (Laundry Appliance):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 VMware CONVERTER STANDALONE 4.3 Operation & user’s manual vmware/converter-standalone-4-3-HUK.pdf 09 Jul 2023 96 0.68 Mb
2 Gigabyte GS-SR101 Operation & user’s manual gigabyte/gs-sr101-S58.pdf 24 Sep 2022 87 3.04 Mb
3 Smeg SUK91CMX5 Instruction manual smeg/suk91cmx5-S85.pdf 24 Jun 2023 16
4 Philips DS 3500 Brochure philips/ds-3500-81E.pdf 17 Nov 2023 2 0.4 Mb
5 Garland BCO-G-10 Installation & operation manual garland/bco-g-10-X12.pdf 24 Aug 2022 10 1.73 Mb
6 NAPCO GEM-X10 Installation instructions napco/gem-x10-3JJ.pdf 26 Oct 2022 4

Similar Resources:

  • Samsung

    WF1124ZA

    (44 pages)
    Washing Machineuser manualimagine the possibilitiesThank you for purchasing this Samsung product.WF1124ZA(C/U) WF1124ZB(C/U) WF1124XA(C/U)WF1124XB(C/U)ARNO_DC68-03038B-13_EN.indd 1ARNO_DC68-03038B-13_EN.indd 1 2015-10-29  2:50:162015-10-29  2:50:16 …
  • Samsung

    WF1704WSE2/XEU

    (10 pages)
    2_ featuresfeatures of your new samsung washing machineYour new washing machine will change the way you feel about doing laundry. From its super-size capacity to its energy effi ciency, the Samsung washing machine has all the features to turn a mundane chore into a pleasure.• Eco Bubble WashSamsung’s effective Eco Bubble delivers improved cleanliness w …
  • Samsung

    WF8604GEA

    (180 pages)
    Washing Machineuser manualimagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/registerWF8604GE(A/C/D/F/G/H/R/S/T/V/W/Z)WF8602GE(A/C/D/F/G/H/R/S/T/V/W/Z)WF8600GE(A/C/D/F/G/H/R/S/T/V/W/Z)WF8608GE(A/C/D/F/G/H/R/S/T/V/W/Z)WF8502GE(A/C/D/F/G/H/R/S/T/V/W/Z)WF8500GE( …
  • Frigidaire

    GLEH1642DS0

    (4 pages)
    10. Start the washer by closing the door andpulling out the cycle selector knob. Thewasher will not operate with the door open.As a safety measure, the door willautomatically lock during the entire washcycle. When the door is closed, the Door LockIndicator lights up when the washer starts,and turns off at the end of the cycle.• To stop the washer, push in …
  • Mustee

    Utilatub 17F

    (2 pages)
    CMCMCMCMPARTS BAGINSTALLATION INSTRUCTIONSINSTRUCCIONES PARA LA INSTALACIÓN n INSTRUCTIONS D’INSTALLATIONE.L. Mustee & Sons, Inc.5431 West 164th St. Brook Park, OH 44142Phone: 216.267.3100 Fax: 216.267.9997 Email: [email protected]: www.mustee.comREAD ALL INSTRUCTIONS CAREFULLY AND INSPECT PRODUCT FOR DAMAGE BEFORE STARTING YOUR INSTALLATION.LEA TODA …
  • Samsung

    WF9904CWN/XSG

    (72 pages)
    Washing Machineuser manualimagine the possibilitiesThank you for purchasing this Samsung product.To receive a more complete service, please register your product atwww.samsung.com/registerWF9904CW(A/E/F/G/H/N/V/W)WF9902CW(A/E/F/G/H/N/V/W)WF9900CW(A/E/F/G/H/N/V/W)WF9904DW(A/E/F/G/H/N/V/W)WF9902DW(A/E/F/G/H/N/V/W)WF9900DW(A/E/F/G/H/N/V/W)WF9904HW(A/E/F/G/H/N/V …

Comments, Questions and Opinions: