Emulex NJ01B-NT+ Operation & User’s Manual
|
3-2 Chapter 3 RESTART THE PRINTER SERVER...................................................................................3-13 286 NON-DEDICATED SERVERS - VAP...............................................................3-13 386 DEDICATED SERVERS - NLM.......................................................................3-13 D EDICATED PRINTER SERVERS - 286 OR
7-16 Chapter 7 10) Enter desired TELRCF options in the Parameters box. Available options: -h server_name or ip_address -p rcf_tcp_port_number (default is 2048) -f script_file_name -t output_file_name -e escape_character (default is <Ctrl>C) 11) Select either OS/2 FULL SCREEN or OS/2 WINDOW. 12) Click the CHANGE button to close the window. TELRCF is configured an
Emulex NJ01B-NT+, A-10 Appendix TCP/IP Transmission Control Protocol/Internet Protocol; a UNIX based protocol suite developed by the Advanced Research Projects Agency (ARPA). TCP is the primary transport protocol and IP is the network-layer protocol. TCP/IP is the standard protocol that allows the different systems of the Internet to communicate with each other. TES A terminate-and-stay-resident terminal emulation program. UTP Unshielded Twisted Pair. A transmission medium providing connectivity on a network.
Emulex NJ01B-NT+, 5-6 Chapter 5 What’s Next? Upon successful configuration of your network operating system, you can either configure for another NOS or manage your printer server with NET wizard printer server administrator. Configure NOS Choose one or more operating systems. • Novell NetWare – page 3-1 • Unix – page 4-1 • VAX/VMS-LAT – page 5-1 (Not supported by NetQue Token Ring) • AppleTalk – page 6-1 • Microsoft OS/2 LAN Manager– page 7-1 • IBM OS/2 LAN Server – page 8-1 • Windows NT 3.5 – page 9-1
Emulex NJ01B-NT+, 2-20 Chapter 2 Print Configuration Parameters Starting with software release 4.15, two methods can be used for printing configuration parameters. The first method uses the status button, and the second employs a software command. Using Status Button This procedure assumes that at least one printer is attached to the printer server. NOTE: If the printer is PCL or text only, the test printout may contain Postscript commands. 1) Verify printer server has power. 2) Verify printer has power and is ON-LINE. 3) Momentarily depress the printer server stat
Emulex NJ01B-NT+, Printer Server Installation Chapter 2 NETJET ................................................................................................................... 2- 1 R EFERENCE NUMBERS.................................................................................................. 2-1 I NSTALLATION.............................................................................................................. 2-2 LAN CONNECTIONS & CABLING ..................................................................................
Printer Server Installation 2-25 What’s Next? After successfully installing your Emulex printer server, you must configure the network operating system (NOS). Refer to the following list. Configure NOS Choose one or more operating systems. • Novell NetWare – page 3-1 • UNIX – page 4-1 • AppleTalk – page 5-1 • VAX/VMS-LAT – page 6-1 • DOS LAN Manag
Emulex NJ01B-NT+, Printer Server Installation 2-39 NETQue Token Ring Reference Numbers It is important that you make a note of the printer server’s unique ethernet address (known as the Media Access Control or MAC address) and its serial number. The figure below shows the locations of these numbers. Figure 2-21: Location of Reference Numbers Although the following information is clearly printed on the unit, we suggest you write the numbers here for later reference. MAC Address: 00-00-93-_____ _____-_____ _____-_____ _____ Serial Number: ____ ____ ____ ____ ____ ____ ____ Next, enter the default printer server name. This name begins w
Emulex NJ01B-NT+, 2-4 Chapter 2 Thinwire BNC Connection CAUTION: Do not break the ethernet connection while LAN is active. 1) If connecting to the middle of a cable segment, use a BNC T-adapter. BNC T-Adapter Figure 2-3: BNC T-Adapter Within a Segment 2) If connecting the printer server to the end of a cable segment, connect the LAN cable to one side of the BNC T-adapter and a 50 ohm terminator to the other side. Segment of Thinwire 50 Ohm Terminator Figure 2-4: BNC T-Adapter With Terminator at End of Segment 3) Attach the BNC T-adapter and cable to the prin
Emulex NJ01B-NT+, Novell NetWare 3-9 Bindery Emulation Mode If multiple file servers use the printer server, the printer server must be defined consistently on each file server. Create the Print Queue While in bindery mode: 1) Log in to the Novell file server as supervisor. > F:\ LOGIN fileserver\SUPERVISOR /b 2) At the DOS prompt, enter: > C:\ PCONSOLE This opens the AVAILABLE OPTIONS menu. 3) Select PRINT QUEUES. 4) Press INSERT. 5) Enter queue name. 6) Press ENTER. 7) Select a print queue. Add the Printer Server Fr
Novell NetWare 3-13 Restart the Printer Server The printer server must be stopped and restarted to enable the new configuration. Use one of the following procedures: 286 Non-Dedicated Servers - VAP 1) At the file server console, enter: > F:\ PSERVER STOP > F:\ PSERVER START 386 Dedicated Servers - NLM 1) At the file server console,
Emulex NJ01B-NT+, 2-26 Chapter 2 NETQue Reference Numbers It is important that you make a note of the printer server’s unique ethernet address (known as the Media Access Control or MAC address) and its serial number. The figure below shows the locations of these numbers. Serial Number (bottom panel) MAC ADDRESS 00-00-C9-01-A0-6A Mac Address Figure 2-14: Location of Reference Numbers Although the following information is clearly printed on the unit, we suggest you enter the numbers here for later reference. Ethernet (MAC) Address: 00-00-C9- ____ ____-____ ____-____ ____ Serial Number: ____ ____ ____ ____ ____ ____ ____ Next, e
Emulex NJ01B-NT+, 4-10 Chapter 4 When the printer server is booted, the host receives the RARP request from the printer server. It then sends the IP address in the /etc/hosts file to the printer server and stores it in the printer server temporary memory. Configure the Print Queue The printer server provides remote printing via the Emulex RPRINT utility on all systems, and LPD on some platforms. ENSTALL automatically installs RPRINT and optionally supports LPD. RPRINT is a UNIX program that may be run from a print spooler or invoked as a stand-alone mod
Emulex NJ01B-NT+, 8-16 Chapter 8 Configure TELRCF Although the TELRCF utility is automatically installed with other LAN Server files, it must be configured prior to use. To configure TELRCF for a single connection or multiple connections, follow these steps: 1) Open the EMULEX PRINT MANAGER. 2) Highlight (single click) the TELRCF icon. 3) Pull down the PROGRAM menu. 4) Select COPY. This opens the COPY PROGRAM window. 5) Enter a name in CHANGE TITLE . For example, Telrcf 138.239.18.2 6) Click on COPY. This creates a new icon with the title just entered. 7) Select the new icon. 8) Pull down the PROGRAM menu. 9) Select PROPERTIES.
Emulex NJ01B-NT+, 8-8 Chapter 8 Advanced Options Modify or select other options. Trace Mode Enabling this option is not recommended. However, if enabled, debugging information is sent to RPRINT.EXE stdout. Use Log File This option may be used to create a log file of the RPRINT activities for each print job. Log File Name Enter a name for the log file. Verbose Log Enabling this option is not recommended. However, if enabled, it expands the amount of debugging information in both the log file and RPRINT’s stdout. Timeout On Ser
Emulex NJ01B-NT+, 10-6 Chapter 10 NOTE: The file EMULEX.LST in the EVERYONE directory describes the files located in each directory. EmuFax EmuFax is an automated document retrieval system that sends Emulex documents or catalogs to your fax machine. To use EmuFax, dial: (714) 513-8276 or (714) 513-8277 NOTE: When first using the EmuFax system, order the Catalog of Available Documents by pressing the number 2 when prompted. When prompted during the EmuFax recording, 1) Enter the document number of the de
Emulex NJ01B-NT+, 2-12 Chapter 2 What’s Next? After successfully installing your Emulex printer server, you must configure the network operating system (NOS). Refer to the following list. Configure NOS Choose one or more operating systems. • Novell NetWare – page 3-1 • UNIX – page 4-1 • AppleTalk – page 5-1 • VAX/VMS-LAT – page 6-1 • DOS LAN Manager– page 7-1 • OS/2 LAN Server – page 8-1 • Windows NT 3.5 – page 9-1
Emulex NJ01B-NT+, 6-2 Chapter 6 Logging into the Printer Server You can login to the printer server remotely from a UNIX workstation or locally from a console terminal. 1) Login to a UNIX TCP/IP workstation. The prompt may appear different than the one shown below. 2) Connect to the printer server: > # telnet ip_address 2048 ip_address The printer server IP address in decimal dot notation. For example: 123.234.345.456. 2048 The printer server RCF port 3) Enter the password: > # access where access is the default printer server remote login password. NOTE: The password does not appear when typed. 4) Verify banner. When the connection is ma
Emulex NJ01B-NT+, UNIX TCP/IP 4-13 Configure a System V Host 1) Copy the Emulex utility RPRINT.C to a host system. This file is found on the UNIX utilities diskette. 2) Go to the subdirectory where RPRINT is loaded. For example, > #/usr/emlx 3) Edit the file ENVIRON.H to reflect the appropriate system type. For example, typical system parameters for a generic System V system: > #define SOCK 1 (0 = no sockets supported) > #define SYSV 1 > #define LING 1 > #define ROBUST 1 > #define PRINTCAP “/usr/emlx/printcap” 4) Compile and link RPRINT.C: If sockets are available, enter: > #cc rprint.c -o r
Emulex NJ01B-NT+, 9-4 Chapter 9 NOTE: If the Enable Automatic DHCP Configuration option is not checked in the Installation Options dialog box, all required procedures for manually configuring TCP/IP must be completed as described in the Windows NT System Guide. The NETWORK SETTINGS dialog box will open. 9) Select CLOSE. 10) Restart the computer. A TCP/IP printer can now be created on this Windows NT computer. Create a TCP/IP Printer Use Print Manager to create a TCP/IP printer. The following information is required: • The IP identifier of the host where the printer is connected. This
Emulex NJ01B-NT+, Table of Contents vi W HAT’S NEXT?.......................................................................................... 6-7 C ONFIGURE NOS................................................................................ 6-7 M ANAGE WITH EMULEX NET WIZARD PRINTER SERVER ADMINISTRATOR ...................................................... 6-7 CHAPTER 7 LAN MANAGER R EQUIREMENTS.......................................................................................... 7-1 P RINT MANAGER DISTRIBUTION FILES ...................................................... 7-1 B EFORE INSTALLATION.......................................................................
Kyocera FS-3718M Printer How to use
FS-3718M |
Zebra LP 2824 Plus Printer Specifications
LP 2824 Plus |
Xerox 6100BD - Phaser Color Laser Printer Printer Manual
6100BD - Phaser Color Laser Printer |
SATO CX200 Printer Programming manual
CX200 |
LevelOne ServCon FPS-3003 Printer Quick install manual
ServCon FPS-3003 |
Epson Artisan 730 Printer Manual
Artisan 730 |
Brother DCP-365CN Printer Quick setup manual
DCP-365CN |
Canon Optura 500 Printer Instruction manual
Optura 500 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Tripp Lite | PR 30 | Specifications | tripp-lite/pr-30-UCU.pdf | 28 Sep 2023 | 2 | 0.1 Mb |
2 | Agri-Fab | 45-03052 | Owner's manual | agri-fab/45-03052-4OT.pdf | 12 Aug 2022 | 32 | 2.96 Mb |
3 | BSS Audio | FCS 966 | Operation & user’s manual | bss-audio/fcs-966-1SV.pdf | 06 Feb 2024 | 32 | 4.8 Mb |
4 | Acer | ISDN 128 Surf USB | Operation & user’s manual | acer/isdn-128-surf-usb-13A.pdf | 18 Feb 2024 | 31 | 0.79 Mb |
5 | Sony | SDM-N50 | Operating instructions manual | sony/sdm-n50-782.pdf | 03 Sep 2022 | 104 | 5.69 Mb |
6 | Whirlpool | Washer | User instructions | whirlpool/washer-6LO.pdf | 23 Jan 2023 | 24 | 0.45 Mb |
Sharp
FOR YOUR PROTECTION...To aid in reporting this compact copier in case of loss or theft, please record below the modelnumber and serial number located on the back of the unit. We also suggest you record all theinformation listed and retain for future reference.MODEL NUMBER SERIAL NUMBERDATE OF PURCHASEDealerAddress CityState Zip TelephoneService StationAddres …
AL-1000 Series(47 pages) |
Lexmark
Connection GuideInstalling the printer locally (Windows)Note: When installing a locally attached printer, if the operating system is not supported by the Software and DocumentationCD, then the Add Printer Wizard must be used.Updates for the printer software may be available on the Lexmark Web site at www.lexmark.com.What is local printing?Local printing is p …
Color Laser(7 pages) |
Lexmark
PRODUCTS | Colour Laser NEW! LEXMARK C540NLiven up all your documents with sharp, fast color from a compact, friendly laser. Printer License AgreementRegister, recycle and get rewarded. Your first FREE high-yield toner cartridge is closer than you think.UNSPSC Code43212105 Display16 character, 2-line backlit LCD Display Print Speed (Letter, Black): Up to2 …
C540N(5 pages) |
Staritech
Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: [email protected] TX-1XX Series Printer User Guide 2013-5-1 V1.0.0 1......................................................................................................................................2 1.1 Disclaimer...................... …
TX-1 Series(24 pages) |
Epson
EPSON PowerLite 8000i/9000i Projector10/99 EPSON PowerLite 8000i/9000i Projector - 1Projector Specifications GeneralType of display Poly-silicon Thin Film Transistor (TFT)Size of liquidcrystal panels Diagonal: 1.3 inches (33.6 mm) Lens F=1.8 to 2.3, f=49 to 69 mmResolution 1024 × 768 pixels (8000i)1366 × 1024 pixels (9000i)Color reproduction 24 bit, 16 …
9000i - PowerLite SXGA LCD Projector(8 pages) |
Epson
Instructional Manual Continuous Ink System for use in Epson WF 600/WF610/NX515/NX510 NOTE: The following instructions and pictures are for reference only. Besides removing the cartridge carrier cover, you do not need to alter your printer in any other way such as cutting or drilling any parts of the printer. Before using this product, please read …
WF600(4 pages) |
FIORENTINI Scrubber ECOSMALL55-N1FIORENTINI Product User Manual: ECOSMALL55-N1 PDF Operating and maintenance manual - F8ADPV ECOSMALL55-N1, 41 |
Harbinger Music Mixer L2404FX-USB LvL seriesUser Guide: Harbinger L2404FX-USB LvL series (5KB745, Upd.25.08.2023) L2404FX-USB LvL series, 24 |
Philips Monitor 170S7FSPhilips Product User Manual: 170S7FS PDF Specifications - 8X4NH7 170S7FS, 3 |
Fuji Xerox All in One Printer 7750Fuji Xerox Product Manual: 7750 PDF Specification sheet - 27WF27 7750, 2 |
Sony Digital Camera Cyber-shot DSC-H9#NK5YWF: Cyber-shot DSC-H9 Digital Camera Specifications Cyber-shot DSC-H9, 2 |
Viking Ventilation Hood DCIH3604Viking Ventilation Hood DCIH3604 Use & care manual DCIH3604, 10 |
ADDER Switch AdderView MatrixUser Guide: ADDER AdderView Matrix (5TF6KD, Upd.03/12/2023) AdderView Matrix, 51 |
Samsung Speakers HW-J650Samsung HW-J650 Speakers Operation & user’s manual HW-J650, 32 |
Emerson Fan CF921ORB00Emerson Product User Guide: CF921ORB00 PDF Owner's manual - 5EX6CG CF921ORB00, 20 |
Behringer Amplifier Ultragain Pro MIC2200Ultragain Pro MIC2200 Operation & user’s manual - 9M62QV Ultragain Pro MIC2200, 14 |
Parkinson Cowan Cooktop SG 555Parkinson Cowan Cooktop Operating and installation instructions (File: electrolux-sg-555-operating-and-installation-manual-56, 19.09.2023) SG 555, 56 |
Husqvarna Trimmer 123CHusqvarna Product User Guide: 123C PDF Operator's manual - W17A89 123C, 27 |