Manualios.com

Epson SureColor SC-S70600 Operation & User’s Manual

  • SureColor SC-S70600 Software
  • maTDSkIE6uaFM
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 139

Epson SureColor SC-S70600 Manual Online:

3.9, 1619 votes
Epson SureColor SC-S70600 User Manual
Epson SureColor SC-S70600 User Guide
Epson SureColor SC-S70600 Online Manual

Text of Epson SureColor SC-S70600 User Guide:

  • Epson SureColor SC-S70600, C Roll holder fixing screw These screws fix the roll holders in place once the media has been installed. There are two lift levers: one on the left and one on the right. D Lift lever If the media to be mounted on the roll holders seems heavy, use these levers to raise the media effortlessly to the level of the roll holders. There are two lift levers: one on the left and one on the right. E Pre-heater Heats the media before printing so that the print area is not subject to sudden changes in temperature. F Roll support Rest media on these supports before placing it on the roll holders. There are two lift levers: o

  • Epson SureColor SC-S70600, ❏ Extra ink is required to fully charge the print head nozzles the first time the printer is used; replacement cartridges will be needed earlier than usual. Store ink cartridges at room temperature in a location that is not exposed to direct sunlight. ❏ Store ink cleaner at room temperature out of direct sunlight. ❏ To ensure print quality, use all the ink in the cartridge before the earlier of the following dates: ❏ The expiry date shown on the ink cartridge packaging ❏ Six months after opening the package of ink cartridge ❏ If you mo

  • Epson SureColor SC-S70600, ❏ This device has two power systems. There is a risk of electric shock unless the two power cables are unplugged during the maintenance. When handling the ink cartridges ❏ Keep ink cartridges out of the reach of children and do not drink. ❏ Do not touch the green IC chip on the side of the cartridge. This may affect normal operation and printing. ❏ The IC chip on this ink cartridge retains a variety of cartridge-related information, such as the ink cartridge status, so that the cartridge may be removed and reinserted freely. ❏ If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust, and store it in the same environment as this product. Note t

  • U Maintenance cover (right) Open this cover when performing regular maintenance. Normally closed when using the printer. U “Regular Maintenance” on page 79 V Media loading lever After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media prior to removal. W Alert lamp This lamp lights or flashes when an error occurs. On Flashing : A

  • Epson SureColor SC-S70600, c Important: Stop when part A is no longer visible. The take-up reel unit may not function as expected if the holder is inserted too far. F Tighten the roll core holder fixing screw to fix the roll core holder in place. See the following for further instructions. For information on counterclockwise take up, see the following section. For information on clockwise take up, see U “Clockwise Take Up” on page 58. Counterclockwise Take Up A Attach the media to the take up roll core. Tape the media to the take up roll core in

  • Epson SureColor SC-S70600, F Loosen the right roll core holder fixing screw and remove the roll core holder from the roll. G Lower the roll onto the roll support. Using the Optional Heavy Roll Auto Take-up Reel Unit This section explains how to remove media from the take-up reel using a lifter. The following types of lifter can be used. ❏ Fork or platform thickness: 28 mm or less ❏ Fork or platform can be lowered to approx.190mm from the floor. ! Caution: ❏ Because the media is heavy, it should not be carried by one person. When loading or removing the media, use at least t

  • G Auto switch Use this switch to select the auto take-up direction.Off Choose Off to disable auto take-up. H Manual switch Use this switch to select the manual take-up direction.Auto The selected option takes effect when the Auto switch is in the Off position. I Casters There are two casters on each leg. Once installation is complete, the front casters should be kept locked whil

  • Epson SureColor SC-S70600, F Head cleaning will be performed. The menu will close when cleaning is complete. Print a nozzle pattern and inspect the results to determine whether the problem has been resolved. U “Checking for clogged nozzles” on page 75 If you paused the printer in Step 1, printing will resume when head cleaning is complete; check the printout to confirm whether the problem has been resolved. Regular Maintenance The printer requires regular part cleaning and part replacement to maintain print quality; the maintenance schedule depends on the frequency with which the printer is used. Failure to perform appropriate maintenance will shorten product life. This guide comes with a check sheet so that you c

  • Epson SureColor SC-S70600, ❏ Enter a correction during printing and inspect the results. Note: Feed Adjustment varies with the media used. Load the media for which feed adjustment is required under the same conditions as the actual print job. For example, if you are using the auto take-up reel unit for printing, the auto take-up reel unit should also be used for feed adjustment. Furthermore, when installing the heavy roll media system, the media must be loaded and feed adjustment performed again, even if once you adjust with the

  • Epson SureColor SC-S70600, ❏ Remaining Setup On: The printer displays the amount of media remaining. Off: The printer does not display the amount of media remaining. When Remaining Setup is On, the printer will calculate the approximate amount of media remaining based on the length of the roll and the amount used for printing and display this information in the control panel. The display gives a rough idea of the amount of media available before printing, making it easier to know when media requires replacement. In addition, a warning will be displayed when the am

  • Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (as of April 2012) For the latest information, see the Epson Web site. Ink cartridges * Printer model Product Part number SC-S70600 Ink cartridges Black T7131 Cyan T7132 Magenta T7133 Yellow T7134 Light Cyan T7135 Light Magenta T7136 Lig

  • Epson SureColor SC-S70600, Introduction Important Safety Instructions Read all of these instructions before using the printer. Also be sure to follow all warnings and instructions marked on the printer. When choosing a place for this product ❏ Place this product on a flat, stable surface that is larger than this product. This product will not operate properly if it is tilted or at an angle. ❏ Avoid places subject to rapid changes in temperature and humidity. Also keep it away from direct sunlight, strong light, or heat sources. ❏ Avoid places subject to shocks and vibrations. ❏ Keep this pro

  • Epson SureColor SC-S70600, Buttons that are used in the following settings A Confirm that the printer is on and press #. The Maintenance menu will be displayed. B Use the d/u buttons to select Head Maintenance and press the Z button. C Press the Z button to move the print head to the cleaning position. D Open the right maintenance cover. E Remove the wiper cleaner. Grasp the cleaner as shown and lift it from the printer. F Insert a new wiper cleaner. Place on the attachment point and press down until you hear a click. EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide Maintenance 87

  • Epson SureColor SC-S70600, Inside (SC-S70600 series, SC-S50600 series) Dirt on any of the following parts may reduce print quality. Regularly clean or exchange these parts as described in the chapters listed in the reference sections below. The illustration shows the SC-S70600 series. A Print head The print head prints by moving left and right while emitting ink. The print head on the left is Head 1, the print head on the right Head 2. We recommend that you clean the area around this unit once a week. U “Cleaning Around the Print Head” on page 81 B Media

  • Epson SureColor SC-S70600, Printable Side In If the label does not have the loading position, mark it on the label as instructed in the Setup Guide. U Setup Guide Note: Be sure the option selected for Roll Type in the Customize Settings menu matches how the media is rolled. Roll Type defaults to Printable Side Out. Be sure to select Printable Side In after loading media rolled printable side in. For more information see U “Roll Type” on page 65 D Raise the lift lever on the left side of the printer to lift the media into position, then firmly insert the roll hold

  • Epson SureColor SC-S70600, Item Parameter Explanation Periodical Cleaning Off Choose the frequency with which the printer performs head cleaning: never (Off) or after 1 to 24 hours. Periodical Cleaning will not be performed while Off is selected.1If a value between 1 and 24 hours is selected, auto head cleaning will be performed after the specified number of hours. If printing is in progress or the printer is in sleep mode when the specified time has elapsed, Periodical Cleaning will only be performed after printing is complete or the printer is reactivated. The following reset the timer: �

  • F Tighten the roll holder screw to fix the roll holder in place. G Raise the lift lever on the right side of the printer to lift the media into position, then firmly insert the roll holder. If the roll of media has the outer diameter which is less than 140mm, lift it up by your hands, and set it to the roll holder as described in Step 5. H Tighten the roll holder screw to fix the roll

  • Epson SureColor SC-S70600, E Lower the tensioner. F Press the d button to feed the media until the take up roll core begins to turn. c Important: The auto take-up reel unit will not function if the tensioner is raised. Removing the Take-up Roll The procedure for removing media varies depending on whether you are using the installed auto take-up reel unit or the optional auto take-up reel unit for heavy media. Follow the steps below when using the supplied auto take-up reel unit. When the Heavy Roll Auto Take-up Reel Unit is i

  • Epson SureColor SC-S70600, Note: Pressure rollers not within the bounds indicated by the black labels do not apply pressure to the media when the media loading lever is lowered. Pressure rollers that are within a black label but not over the media will cause friction during printing; be sure to position rollers that are not over the media outside the black labels. Using the High Pressure Rollers Position the high pressure rollers within 10 mm of the edges of the media inside any of the black labels from A to J in the “Positioning Media of Different Widths” illustration. The gray area in the illustration below shows the pr

  • Epson SureColor SC-S70600, 1 Status indicators The status of the waste ink bottle is shown as fol- lows. : No error. The indicator changes to show the amount of space available. : The waste ink bottle is almost full. Ready a new waste ink bottle. : The waste ink bottle is full. Replace with a new waste ink bottle. F Media lift detection status This is displayed by the SC-S50600 series only. : The printer checks whether the media lifts during printing. : The printer does not check whether the media lifts during printing. U “The Maintenance Menu” on page 106 G Additional print drying system status This display shows settings for the additional print drying system (supplied w

  • 1.6 "Modifications" mean any addition to, deletion from, and/or change to, the substance and/or structure of the Original Code, any previous Modifications, the combination of Original Code and any previous Modifications, and/ or any respective portions thereof. When code is released as a series of files, a Modification is: (a) any addition to or deletion from the contents of

  • Epson SureColor SC-S70600, ❏ Check the amount of ink remaining: If ink is expended during printing, printing can be resumed once the affected cartridge has been replaced. However, when replacing ink during a print job, you may see a difference in color depending on the drying conditions. If you know that the print job will be a large one, we recommend that you use new cartridges to replace those that are running low before you start. The old cartridges can be reinserted and used at a later date. Ink level is shown by an icon. U “Understanding the Display” on page 20 Replacing Ink Cartridges U “How to replace” on page 92 ❏ Agitating white and metallic silver Inks White and metallic

  • Epson SureColor SC-S70600, H Rotate the handle until part A in the illustration below is fully inserted. c Important: Once part A is hidden, do not turn the handle any further. Failure to observe this precaution could damage the roll holder. If part A is not hidden even after turning the handle until it can no longer be turned, return to step 6 and fully press the right unit into the roll core. I Raise the media loading lever. J Pull out the media and insert it into the printer. Note: Media that is heavy and difficult to unroll can be fed by pressing the drive switch o

  • Epson SureColor SC-S70600, D Clean the area shown in the illustration. E Return the wiper cleaner that was removed in Step 2 to its original position. Place on the attachment point and press down until you hear a click. Users of the SC-S70600 series or SC-S50600 series will need to return to Step 2 and clean the remaining rail. F Close both maintenance covers and press the Z button. The menus will close when the print head returns to its normal position. Disposing of Waste Ink When to Dispose of Waste Ink Be sure to replace the waste ink bottle when the following message is displayed in the control panel. ❏ Prepare empty waste ink_bottle. ❏ Replace waste ink bottle and press Z. Leave the was

  • Epson SureColor SC-S70600, Starting EPSON LFP Remote Panel 2 Launch EPSON LFP Remote Panel 2 after confirming that the printer displays Ready. Windows A The application can be launched using either of the following two methods. ❏ Double-click the EPSON LFP Remote Panel 2 icon on the desktop. The EPSON LFP Remote Panel 2 icon is created when the application is installed. ❏ Click Start > All Programs (or Programs) > EPSON LFP Remote Panel 2 > EPSON LFP Remote Panel 2. B Click the desired item in the EPSON LFP Remote Panel 2 main window. See E

  • Epson SureColor SC-S70600, Buttons that are used in the following settings A After confirming that the printer is ready, press the # button. The Maintenance menu will be displayed. B Select Nozzle Check and press the Z button. C A nozzle pattern will be printed. When printing is complete, the media will automatically be fed to a position where the pattern is clearly visible. Cut the media if necessary. U “Cutting Media” on page 54 Note: To rewind the media, press u. D Inspect the nozzle pattern. Example of clean nozzles The pattern contains no gaps. Example of clogge

Related Products and Documents (Software):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Ricoh Aficio MP 171 Operating instructions manual ricoh/aficio-mp-171-44H.pdf 30 Sep 2023 100 2.47 Mb
2 Lexicon DC-1 Owner's manual lexicon/dc-1-518.pdf 30 Jul 2022 66
3 Crestron 2 Channel Dimmer Module CLX-2DIM2 Specification sheet crestron/2-channel-dimmer-module-clx-2dim2-9MN.pdf 31 Oct 2023 1 0.47 Mb
4 LG LX150 Specifications lg/lx150-LPH.pdf 13 Nov 2022 2
5 Bryant 5-905 Installation instructions bryant/5-905-81W.pdf 17 Jul 2022 4 0.19 Mb
6 Pentax 19554 Brochure & specs pentax/19554-ROT.pdf 03 Jan 2023 9 1.4 Mb

Similar Resources:

  • Omron

    ZEN-SOFT01-V4 - 12-2008

    (95 pages)
    Cat. No. Z184-E1-04ZEN Support SoftwareZEN-SOFT01-V4OPERATION MANUALCat. No. Z264-E1-06A Note: Specifi cations subject to change without notice.Authorized Distributor:Printed in EuropeCat. No. Z264-E1-06A Smart Sensor ZFX-C USER´S MANUAL …
  • Compaq

    108164-003 - ProLiant - 800

    (15 pages)
    Integration NoteHelp us improve our technical communication. Let us know what you thinkabout the technical information in this document. Your feedback is valuableand will help us structure future communications. Please send yourcomments to: [email protected] 2001145Z-0301B-WWENPrepared by OS IntegrationEngineeringCompaq Computer CorporationContentsInt …
  • Bosch

    2

    (13 pages)
    Robert Bosch GmbHPower Tools Division70745 Leinfelden-EchterdingenGermanywww.bosch-pt.com1 609 929 T81 (2009.08) T / 104 WEUPLT 2de Originalbetriebsanleitungen Original instructionsfr Notice originalees Manual originalpt Manual originalit Istruzioni originalinl Oorspronkelijke gebruiksaanwijzingda Original brugsanvisningsv Bruksanvisning i originalno Origina …
  • Casio

    FX-9750G

    (29 pages)
    Chapter18Statistical Graphs andCalculationsThis chapter describes how to input statistical data into lists, andhow to calculate the mean, maximum and other statistical values. Italso tells you how to perform regression calculations.18-1 Before Performing Statistical Calculations18-2 Paired-Variable Statistical Calculation Examples18-3 Calculating and Graphin …
  • HP

    LASERJET ENTERPRISE 500

    (12 pages)
    1MaximizingenergyconservationinHPLaserJetM500andM600seriesprinters9amOctober4,2011Quickset:SMB–SmallandMediumbusinesseswithminimalcentralmanagementThefollowingsteps,appliedtoanM500orM600seriesprinter(viatheEmbeddedWebServer)� …
  • Epson

    LQ-590

    (4 pages)
    Extremely robust high speed 24pin dot matrix printers • Very high speed printing up to 529cps• Mean Time Between Failure 20,000 power on hours• Mean Volume Between Failure 40 million lines• Print head life 400 million strokes/wire• Flexible paper handling from front, top, rear and bottom• Standard parallel and USB interfaces and optional network …

Comments, Questions and Opinions: