Tascam DR-07MKII Owner's Manual

Text of Tascam DR-07MKII User Guide:

• Tascam DR-07MKII, TASCAM DR-07MKII 13 8 Use the + or – button to control the playback volume. 9 Press the (HOME) [ª] button to stop playback. NOTE If you have made several recordings, use the  or ¯ button to select the file to play when playing back or stopped and the Home Screen is displayed. Quick Start Guide

• Tascam DR-07MKII, 42 TASCAM DR-07MKII Setting the date and time Using its internal clock, this unit remembers the date and time when a le is recorded. 1 Press the MENU button to open the MENU screen. 2 Use the + or – button to select the OTHERS menu item (highlighted), and press the Á button. The OTHERS screen is displayed. 3 Use the + or – button to select the DATE/ TIME menu item, and press the Á button. The DATE/TIME screen is displayed. 4 Press the  or ¯ button to move the cursor (highlighted area), and use the + or – button to change values. 5 Press the Á button to confirm the change and return to the OTHERS screen. NOTE You can set th

• Tascam DR-07MKII, TASCAM DR-07MKII 33 The file name that will automatically be given to recorded files is shown. 8 Recording mode Recording file format, sampling frequency, and stereo/mono (ST/MONO) status are shown. 9 Elapsed recording time The elapsed recording time of the track appears as hours: minutes: seconds. 0 Remaining recording time The remaining recording time until the selected max file size is reached appears in hours: minutes: seconds. If the remaining recording time on the card is less than the remaining time until the selected max file size is reached, the remaining recording time on the card is displayed. q Peak value in decibels (dB) Peak recording level values

• Tascam DR-07MKII, TASCAM DR-07MKII 63 7 Use the + or − button to select PB INPUT , and press the ¯ or Á button. 8 Use the + or - button to adjust the playback volume level in a range from 0 to 20. 9 When finished, press the (HOME) [ª] button to return to the Home Screen. TIP By making the above settings, in addition to overdubbing, you can use a recorded (or copied) audio track for instrument practice or karaoke. NOTE You cannot select ON or OFF for INPUT items on the MONITOR MIX during recording/in recording standby. Adjusting the input level (simple adjustment) If Monitor Mix is enabled ( INPUT is selected in the MONITOR MIX

• TASCAM DR-07MKII 121 Other specifications Power Two AA batteries (Alkaline or Ni-MH) USB bus power supplied from a computer AC adaptor (TASCAM PS-P515U, sold separately) Power consumption 1.7 W (maximum) Battery operation time (continuous operation) Alkaline type battery (EVOLTA) Recording/ playback Format Operation time Note Recording WAV 96KHz, 24bit About 10.5

• Tascam DR-07MKII, TASCAM DR-07MKII 39 CAUTION Never use any adaptor other than the designated PS- • P515U AC adaptor. Use of a different adaptor could cause malfunction, fire or electric shock. Noise may occur when recording with a microphone if • the unit is too close to the AC adaptor. In such a case, keep sufficient distance between the AC adaptor and the unit. NOTE When both batteries are installed and the AC adaptor is connected, power will be supplied from the AC adaptor. Using USB bus power Connect the unit to a PC using the attached USB cable as shown in the illustration. The USB SELECT screen appears to choose between USB bus

• Tascam DR-07MKII, 50 TASCAM DR-07MKII In addition to using the built-in microphone, you can record using an external microphone or record the output signal from a mixer or other audio source. You can select among MP3 (44.1/48 kHz, 32–320 kbps) and WAV (44.1/48/96 kHz, 16/24-bit) audio recording formats. As the unit is compatible with the BWF format for WAV les, marks added to the WAV les during recording are available when playing back the les using a BWF compliant software, etc. With this unit, you can mix and record a sound input through the built-in mic or one of

• Tascam DR-07MKII, TASCAM DR-07MKII 57 Using the Level Control Function The level control function for recording through a microphone is set as follows. 1 Press the RECORD [º] button to bring the unit in recording standby. The REC indicator will flash and the recording screen will appear. 2 Press the QUICK button. The Quick menu screen will appear. 3 Use the + or − button to select (highlight) LEVEL CTRL , and press the Á button. The level control setting screen will appear. Options: OFF (default), PEAK REDUCTIO

• Tascam DR-07MKII, TASCAM DR-07MKII 9 Table of Contents Setting the playback area (AREA) ..................80 Selecting a folder for the playback area (1) ....82 Selecting a folder for the playback area (2) ...83 Playlist ......................................................................84 Adding tracks to the playlist ...........................84 Editing the playlist ..............................................85 Selecting files for playback (skip) ..................87 Playback ...............................................................

• Tascam DR-07MKII, 108 TASCAM DR-07MKII Card information page The CARD page shows the status of the currently inserted microSD card. TOTAL MUSIC Shows the number of playable les contained by the Music Folder. TOTAL FOLDER Shows the total number of folders in the Music Folder. TOTAL SIZE Shows the total microSD card capacity. REMAIN SIZE/USED SIZE Shows the amount of unused/used capacity on the microSD card. Press the  or ¯ button to switch between REMAIN SIZE and USED SIZE . System information page The SYSTEM page shows information about the DR- 07MKII’s system settings and rmware versio

• Tascam DR-07MKII, TASCAM DR-07MKII 93 Moving back a few seconds for replay (jump-back playback) Press the Á button during playback to move back a few seconds (adjustable) and restart playback. (Jump-back playback). If you nd a favorite passage of music or lyrics during playback, press the Playback button to go back a few seconds and replay that passage. The jump-back time is set as a JUMPBACK setting. 1 Press the MENU button to open the MENU screen. 2 Use the + or − button to select PLAY SETTING , and press the Á button. PLAY SETTING screen appears. 3 Use the + or − button to select JUMPBACK , and press the ¯ or Á button. 4 Use the + or −

• Tascam DR-07MKII, 62 TASCAM DR-07MKII Simultaneous listening to playback and input sound (Monitor Mix) This allows you to listen to playback and input sound at the same time (Monitor Mix). NOTE The prerecording function is disabled if the “MONITOR MIX” is “ON” . 1 Press the MENU button to open the MENU screen. 2 Use the + or − button to select OTHERS , and press the Á button to open the OTHERS submenu. 3 Use the + or − button to select MONITOR MIX , and press the Á button. MONITOR MIX screen appears. 4 Use the + or − button to select INPUT , and press the ¯ or Á button. 5 Use the + or - button to select ON . (Default: OFF )

• Tascam DR-07MKII, 54 TASCAM DR-07MKII 4–Recording Placing the unit and making connections Recording with the built-in mics Point the mics at the sound source and place the unit in a stable location where there is little vibration. Recording with external mics (MIC IN) Connect an external mic to the MIC/EXT IN connector. Point the mics at the sound source and place the unit in a stable location where there is little vibration. NOTE The setting of left-right channels is disabled if an external • microphone is connected to the MIC/EXT IN jack. Recording an external device (EXT IN) Use a stereo miniplug c

• 122 TASCAM DR-07MKII 14–Specifications Recording/ playback Format Operation time Note Recording MP3 48 KHz, 320Kbps About 11 hours Built-in microphone Playback WAV 96KHz, 24bit About 15 hours Headphones Playback WAV 96KHz, 24bit About 14 hours Built-in Speaker Playback WAV 44.1KHz, 16bit About 16.5 hours Headphones Playback WAV 44.1KHz, 16bit About 16.5 hours Built-i

• Tascam DR-07MKII, 114 TASCAM DR-07MKII Message Meaning and response MBR Error Init CARD The card is not formatted properly or the formatting is broken. Change the card or press the Á button when this message appears to format the card in FAT format. CAUTION: Execution of FAT formatting erases all data currently on the card. Format Error Format CARD The FAT formatting of the card is abnormal or broken. This message also appears if you FAT formatted the card using a computer connected by USB and if a new card is inserted in the unit. Always use the DR-07MKII to conduct FAT formatting of cards to be used with it. Change the card or press the Á button when this message

• Tascam DR-07MKII, 24 TASCAM DR-07MKII On the setting screens, use this button to move the cursor left. On the BROWSE Screen, press this button to move up a level. Press this button during recording or recording standby to decrease the input level from the built-in microphone or MIC/EXT IN jack. During adjustment, a pull-up window is shown in the display. 8PB CONT button This button activates the Playback Control screen. When the Playback Control screen is displayed, press this button to return to the Home Screen. Press this button during recording standby to turn off the self-timer functio

• 38 TASCAM DR-07MKII Powering the unit DR-07MKII can operate on two AA batteries, or through an optional AC adapter (TASCAM PS-P515U) or USB cable provided with the unit (USB bus power). Alkaline or Ni-MH batteries can be used. Using AA batteries Open the battery compartment cover on the back of the unit. Fit two AA batteries to the + and – marks shown in the compartment,

• Tascam DR-07MKII, TASCAM DR-07MKII 3 IMPORTANT SAFETY INSTRUCTIONS CAUTION for products that use replaceable lithium batter- • ies: there is danger of explosion if a battery is replaced with an incorrect type of battery. Replace only with the same or equivalent type. Caution should be taken when using earphones or head- • phones with the product because excessive sound pressure (volume) from earphones or headphones can cause hearing loss. Cautions about Batteries This product uses batteries. Misuse of batteries could cause a leak, rupture or other trouble. Always abide by the following

• Tascam DR-07MKII, TASCAM DR-07MKII 79 Creating a new folder In the le list, NEW FOLDER appears at the bottom. Select (highlight) NEW FOLDER , and press the Á button. A pop-up appears to conrm that you want to create a new folder. Press the Á button to create a new folder or press the (HOME) [ª] button to cancel. Note that the unit supports only a two-level folder structure, and accordingly NEW FOLDER does not exist in the second-level folders. A newly created folder becomes the current one, and new recorded les are saved in this folder. If the playback area has been set to FOLDER , this folder becomes the playback area. 5–Worki

• Tascam DR-07MKII, 94 TASCAM DR-07MKII Features of the QUICK button The QUICK button serves for the following purposes. While the Home Screen is open and when stopped • or paused, opens the Quick menu screen for deletion, division, and level alignment (enhancing the perceived overall sound pressure) of the current track. During playback, the Quick menu screen appears only for level alignment. While the Home Screen is open during recording • standby, the Quick menu screen appears for the setting of level control or the left-right chann

• 12 TASCAM DR-07MKII 3 Press the RECORD [º] button to switch to recording standby. The REC indicator will flash. NOTE If the or icon appears in the upper right of the Home Screen, the adjustment for the angle and the left-right channels of the microphone do not suit the recording setting. Change the settings. (See “Using the built-in microphone” on page 46.)

More Instructions:

Tascam DR-07MKII Manual to using 14-12-2023 2

DOWNLOAD

Related Products and Documents (Voice Recorder):

Comparable Devices:

Similar Resources:

• Mini Gadgets VADVR1000 (5 pages) VADVR1000 VOICE ACTIVATED CAMSTICK SKU: VADVR1000 THANK YOU FOR PURCHASING THE VADVR1000 Please read this manual before operating the VADVR1000 and keep it handy. The VADVR1000 Voice Activated DVR is capable of fitting professional quality recording capabilities into a sleek, slim form. The product is a breeze to use. This item is ideal for those …

• CT Lab Impedo DUO (119 pages) Impedo DUO® Power Quality Recorder User Manual Version 2.4 CT LAB (Pty) Ltd PO Box 897, Stellenbosch, 7599, South Africa 15 Termo Lane, Techno Park, Stellenbosch, 7600, South Africa Tel: +27 21 880 9915 Fax: +27 21 880 1088 Email: [email protected] Web: www.ctlab.com © CT LAB (2015) …

• Velleman PCRU01 (9 pages) 1 FOUR CHANNEL USB RECORDER PCRU01 User manual Table of Contents Features 2 Specifications 2 hardware 2 software: 2 system requirements 2 Software installation 2 SAFETY and WARNINGS 3 Warranty 3 Connections 3 power led 3 diagnostic led 3 Signal input 3 Readout screens 4 Analog screen 4 Digital screen 4 Software contro …

• RCA VR4210GB (18 pages) Product registrationThank you for purchasing an RCA product. We pride ourselves on the quality and reliability of all our electronic products but if you ever need service or have a question, our customer service sta stands ready to help. Contact us at www.rcaaudiovideo.com. PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the un …

• Sony SRW5800/2 (2 pages) HDCAM-SR Workflow Guide- AJA KONA 3 capture card and driver version 7.5 for use with Mac OSX- Double-speed transfer via AJA hardware and AJA softwareWhen used alongside properly equipped Sony HDCAM-SR VTRs (such as the Sony SRW-5800), the AJA KONA 3 capture card can be configured to ingest material at double normal speed or “DBL” speed. Double-speed tra …

• Sanyo ICR-B150 (51 pages) ICR-B150INSTRUCTION MANUALDigital Voice RecorderENGLISHESPAÑOLSANYO'S HELP-LINECall the toll-free number below if you have any difficulties operating thisproduct.1-877-999-1840 (Weekdays 8:00 AM - 5:00 PM, Pacific Time)LlNEA DE CONSULTA SANYOLlame gratis al número indicado a continuación si tiene dificultades alutilizar este producto.1-877-999-1840 ( …

Comments, Questions and Opinions: