Manualios.com

Epson ActionNote 866C Operation & User’s Manual

Epson ActionNote 866C Manual Online:

4.45, 2150 votes
Epson ActionNote 866C User Manual
Epson ActionNote 866C User Guide
Epson ActionNote 866C Online Manual

Text of Epson ActionNote 866C User Guide:

  • Epson ActionNote 866C, Interfaces External VGA Auto-sensing, 15-pin, D-sub, female connector for analog monitor Parallel Centronics ® compatible; 25-pin, D-sub, fern ale connector; standard S-bit parallel; supports standard (AT compatible) and bidirectional (PS/2 compatible) modes Serial RS-232C, programmable, asynchronous, 9-pin, D-sub male connector External Auto-sensing, 6-pin, mini-DIN connector keyboard/ for a PSI 2-type external keyboard, mouse keypad, or pointing device Phone jack Standard RI-11 connector with optional internal fax/ modem instal

  • Epson ActionNote 866C, Using the Trackpad The trackpad on your ActionNote is a state-of-the-art pointing device which you can use to move the cursor, select text or objects, cut and paste, or choose menu items. The trackpad is compatible with most software applications that support pointing devices with PS/2 compatible drivers. To use the trackpad, simply move your fingertip across the pad in the direction you want to move the cursor. If you get to the edge of the pad, lift your finger and place it back down on the other side. If you have to lift your finger too often, you can increase the sensitivity of the trackpad using the Trackpad utility

  • Epson ActionNote 866C, Fax/ modem, internal (continued) result codes, B-6 software, 4-26, 5-16, B-1 specifications, A-3, B-1 using, 3-1—2, 4-26 Fax/ modem PC card, 2-16, 2-20 FDISK, 3-10, 4-11 Flash cards, 2-18 Fn key functions, 2-4—5 H Hard disk cards, partitioning, 2-17—18 Hard disk drive backing up, 1-9, 2-3 connector, 4-8—9 compartment, 1-2, 4-7, 4-9, 4-11 controller, A-1—2 defining in Setup, 1-11 Instant On partition, 3-9—10 light, 1-8, 2-2, 5-13 power management, 3-7—8 problems, 5-12—13 protecting, 2-2 removing, 4-6—9 replacing, 4-6—

  • If you plan to use another operating system, such as OS/ 2, ® UNIX, ® or Windows NT, you can install it now. See the documentation that came with it for installation instructions. Before you turn off your computer, save your data and exit the program you are currently using. Make sure the computer is not accessing data from the diskette drive, hard disk drive, or a PC card; th

  • Epson ActionNote 866C, Entering a Setup Password When you have defined a Setup password, the computer prompts you for it only after you have pressed F8 to enter Setup. After you press F8 but before you see the main Setup screen, you see a message prompting you to enter your password. Type your password and press Enter. (The screen does not display the characters you type.) Then you see the Page 1 Setup screen. If you type your password incorrectly, the computer allows you three tries to retype it correctly. After the third incorrect attempt, your system continues the boot process without loading the Setup program. Using Diskettes You can use either of the following types of diskettes

  • Epson ActionNote 866C, 6. To install a new drive, you first need to attach the connector card. Align the holes in the card with the group of 44 pins on the right side of the drive connector. The metal tabs on the card should be facing up. Make sure the connector does not cover the group of four pins on the left side of the drive connector. 7. When you are sure the holes and pins are properly aligned, carefully push the card straight onto the pins, pressing firmly on the card until it is fully seated. Caution The hard disk drive compartment on your ActionNote can accommodate drives up to 19 mm high. If the d

  • Epson ActionNote 866C, Caution Use only the adapters and replacement batteries designed for use with the ActionNote 800 series (lightweight AC adapter model number A882051, international AC adapter model number A882101, auto adapter model number A882241, and battery A882291). Environmental Requirements Condition Operating Non-operating Temperature 42° to 95° F -4° to 140° F (5° to 35° C) (-20° to 60° C) Humidity (non-condensing) 30% to 90% 5% to 95% Altitude -200 to 12,000 ft -200 to 30,000 ft (-67 to 4,000 m) (67 to 9,000 m) Acousti

  • Epson ActionNote 866C, AT Commands Command +++ A/ AT A B0 B1 Cl D E0 El HO H1 I0 I1 I2 L3 MO Ml M2 M3 O0 O1 Q0 Q1 Sr Sr? Sr=n V0 V1 X0 Xl x2 Description Escape code Repeat last command string Attention Answer immediate (incoming call) CCITT V.22 protocol at 1200 bps Bell 103/212A protocol at 1200 bps Carrier control option Dial; originates a call Echo off (command mode) Echo on (command mode) On hook; hang up immediately Off hook; ready to dial Returns modem’s product ID code Returns modem’s ROM checksum Tests modem’s internal memor

  • Memory adding, 4-16 addresses, 2-16 cache, Intro-2, 1-13, A-1 configuring, 4-18 manager program, 2-13, 5-17 module, 4-16—18, 5-15, A-1 RAM, Intro-2, 5-4, A-1 ROM, 1-9, 5-4, A-1, A-4 specifications, Intro-2, A-1 Microphone, 1-2 Microprocessor, see Processor Monitor, see External monitor Mouse configuring, 4-4 connecting, 4-4 port specifications, A-3 problems, 5-11 MS-DOS, Intro-1-8,

  • Controllers Video Chips and Technology ® 65535 video controller; 32-bit local bus interface to the microprocessor; supports enhanced video modes on an external monitor; supports resolutions from 640 x 480 in 256 colors on the color LCD and up to 1024 x 768 in 16 colors on an external monitor; automatic external monitor detection; simultaneous display with LCD screen

  • Epson ActionNote 866C, Note If your system is working properly, you don’t need to edit any of the PC card configurations. The Resource Allocation option on the Utility pull-down menu provides a quick view of the system resources that are available to CardSoft. You can also edit these system resources. Caution Do not change any resource allocation values unless you understand how these resources work on your system. You can assign a color, monochrome, or LCD display mode for the CardSoft configuration utility by selecting the Display pull-down menu. When you make your selection, the screen immediately reflects the option you have chosen. Once you have changed your configuration, make sure you save the se

  • Epson ActionNote 866C, CSALLOC utility CSALLOC is an MS-DOS program that scans the system for available memory, I/O port, and IRQ resources each time you start your system and maintains the information it collects in a file called CSALLOC.INI. You need to run CSALLOC only if you want to display the available system resources if you’ve changed port, IRQ, or memory settings on your system. You should also run CSALLOC when you install new hardware or software that requires specific system resources so that CardSoft does not use the resources instead. You must run CSALLOC from the MS-DOS prompt; you cannot run it from within Windows. Type CSALLOC /

  • Epson ActionNote 866C, Appendix A Specifications CPU and Memory ......................... A-1 Controllers ............................. A-2 Interfaces .............................. A-3 Keyboard .............................. A-3 Trackpad .............................. A-3 Fax/ Modem ............................ A-4 Volume Control .......................... A-4 Mass Storage ........................... A-4 LCD Screen. ............................ A-4 Setup Program ........................... A-4 Software .............................. A-5 Power Sources ........................... A-5 Environmental Requirements .................. A-6 Physical Dimensions ..

  • 3. If you inserted a RAM or hard disk card, did you format it? Like a diskette, a new PC RAM or hard disk card may need to be formatted (initialized) before you can use it. See the documentation that came with the card for instructions. 4. Is your PC card compatible with the ActionNote? The PC card slots on your computer support PCMCIA version 2.1 or earlier

  • Epson ActionNote 866C, FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular instal

  • Epson ActionNote 866C, The computer’s charge light changes color as follows to show the battery charging status: Green-battery is fully charged Orange-battery is charging norm ally Flashing orange-the battery is not installed properly or is damaged; remove the battery, examine it, and try reinstalling it. Using the Power Management Features Your ActionNote offers a variety of automatic and manual power management features to help you conserve battery power. These features turn off various system components—such as the CPU, the hard disk, a

  • Epson ActionNote 866C, Follow these steps to install a PC card: 1. Open the door covering the PC card bay on the left side of your computer. 2. Hold the PC card so the 68-pin connector on the edge of the card faces the PC card slot and the card’s label faces up. release buttons 3. Align the card in the card guides of the appropriate slot. Then push the card gently but firmly into the slot as far as it will go. (Part of the card extends from the slot.) When you feel resistance, stop pushing; do not force it into the slot. When you have fully inserted the card, the release button on the side of the slot pops out slightly. The button on the left is for

  • Epson ActionNote 866C, Be sure to save your changes to both files and then reboot your system for the changes to take effect. Note You can also rename your modified CONFIG.SYS, AUTOEXEC.BAT, and/ or Windows.INI files and then copy backup versions of your original files from the C:\ BACKUP directory. Copy the CONFIG.SYS and AUTOEXEC.BAT files to C:\, and copy the Windows .INI files to the C:\ WINDOWS directory. 6. If none of these solutions solve your problem, contact the card manufacturer or call your Authorized EPSON Servicer or the EPSON Connection for assistance. 5-18 Troubleshooting

  • Epson ActionNote 866C, Configuration Utility The configuration utility allows you to customize your system or reconfigure it when you have trouble using a PC card. You can change the following configurations for your PC cards using this utility: IRQs and COM port assignment order for fax/ modem cards I/O port address, IRQ, and memory areas for network cards Addresses for ATA cards Card insertion parameters. You can also use the utility to modify the resource allocation that the program scanned when you started your syste

  • Epson ActionNote 866C, If you use Instant On or the Low Battery Save to HDD options, the PCMCIA services are not reinitialized. In this case, your computer recognizes SRAM PC cards, but does not recognize most other PC cards, such as fax/ modem or LAN PC cards. To reinitialize the services, exit any application programs you are using and exit Windows. Then press Ctrl Alt Del to reboot your computer. Installing Additional PC Card Drivers and Utilities While the ActionNote is fully compatible with PCMCIA version 2.1 and JEIDA 4.1, some PC cards (such as LAN cards) require that you install special drivers or software before the card works correctly. For example, a LAN car

  • Epson ActionNote 866C, Software versions In Windows applications, select About from the Help menu, or read the version number from the banner screen displayed when the program starts, or check your software manual. MS-DOS version In Windows, select the MS-DOS Prompt icon. When the MS-DOS prompt appears, type VER and press Enter to display the MS-DOS version number. CONFIG.SYS In Windows, use the Sysedit utility in the Applications group to see a list of the system configuration commands in the file. At the MS-DOS prompt, t

  • The Computer Won't Start If your computer does not start when you press the power button, try the following: 1. Check the Power light. If the light is not on, go to step 3. If it is on, check the Suspend light. If the light is on, press any key. If it is flashing, press the Suspend/ Resume key. 2. Check the Charge light. If it is flashing orange, the battery may be damaged or

  • Epson ActionNote 866C, AT commands (continued) Command x3 x4 Y0 Y1 Z0 Z1 &C0 &C1 &DO &D1 &D2 &D3 &F &GO &G1 &G2 &Jn &L0 &MO &P0 &P1 &Q0 &Sn &Tn &Q6 &Y0 &Y1 Ln %Dn %V &V &W0 Description Enable extended result codes (O-5, 7, 10) Enable all result codes Disable long space disconnect Enable long space disconnect Software reset; recalls user configuration 0 Software reset: recalls user configuration 1 DCD signal always on DCD signal on when carrier present lgnor

Related Products and Documents (Laptop):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Fostex FD-8 Supplement owner's manual fostex/fd-8-N8R.pdf 03 May 2023 2 0.07 Mb
2 Mackie CFXMKII - DIAGRAMS Appendix mackie/cfxmkii-diagrams-H45.pdf 04 Dec 2023 2
3 GE Spacemaker 164 D2588P088 Use and care manual ge/spacemaker-164-d2588p088-GO3.pdf 25 Mar 2023 36 1.01 Mb
4 Tuncmatik NEWTECH PRO 1 KVA Operation & user’s manual tuncmatik/newtech-pro-1-kva-VA1.pdf 28 Dec 2022 16
5 Nextar X4-T Important safety instructions manual nextar/x4-t-X9Q.pdf 19 Nov 2023 22
6 Sennheiser PC 26 Call Control Specifications sennheiser/pc-26-call-control-ZAV.pdf 06 Mar 2024 2 1.87 Mb

Similar Resources:

  • Acer

    Extensa 500

    (108 pages)
    Extensa 500 NotebookService GuideService Guide files and updates are available on Acer Intranet and CSD database on Lotus Notes. For more detailed information, please refer to Service CD kit. …
  • Sony

    VGN-A270B

    (1 pages)
    ModelVGN-A270B CTOHARDWAREProcessor (Configurable)1Intel®Pentium®M Processor 765(2.1GHz, 2MB L2 Cache)Intel®Pentium®M Processor 755 (2GHz, 2MB L2 Cache) Intel®Pentium®M Processor 745 (1.80GHz, 2MB L2 Cache) Intel®Pentium®M Processor 725(1.60GHz, 2MB L2 Cache) Front Side Bus Speed400MHzChipsetIntel®855PMIntegrated Wireless LANIntel®PRO/Wireless 2200 …
  • Lenovo

    ThinkPad SL500

    (2 pages)
    08/05/20081234456781059212 32118115679104233Instale o pacote de bateria:Sua bateria está pronta parautilização.Conecte oequipamento àalimentação:Ligue oequipamento:Este processo leva alguns minutos.Configure o Sistema Operacional conforme as instruções na tela:Remova os itens da embalagemPressione a capa do TrackPoint ou mova através do touch pad na …
  • Lenovo

    ideapad 320-17IKB

    (36 pages)
    Read the safety notices and important tips in theincluded manuals before using your computer.Lenovo ideapad 320ideapad 320-17IKB/ideapad 320H-17IKB/ideapad 320L-17IKB/ideapad 320R-17IKB/ideapad 320E-17IKB/ideapad 320-17ISK/ideapad 320H-17ISK/ideapad 320L-17ISK/ideapad 320R-17ISK/ideapad 320E-17ISK User GuidelmnRead the safety notices and important tips in th …
  • Random

    Colleague

    (132 pages)
    CORPORATION"'"""',-,-,-""':Calleague™&CCJIIeaguePILI!;'",-:User'sGuide,-I"'"...,-,-,---,-,.....,.....,.....,.....-.-.,-.--,.....,.....,.....-.,.....""',.....,,.....----!'",-.-----------!'"I"',...."'",.... …
  • Toshiba

    Satellite Pro L40 Series

    (179 pages)
    GMAD00396011 11/14 If you need assistance:Technical support is available online at Toshiba’s Web site at support.toshiba.com. At this Web site, you will find answers for many commonly as …

Comments, Questions and Opinions: