Manualios.com

Epson EMP Monitor Operation Manual

Epson EMP Monitor Manual Online:

4.1, 1078 votes
Epson EMP Monitor User Manual
Epson EMP Monitor User Guide
Epson EMP Monitor Online Manual

Text of Epson EMP Monitor User Guide:

  • Epson EMP Monitor, The mail notification function can be used to send corresponding notification messages to a preset e-mail address when a projector that is connected to the network assumes a certain status, or if it experiences a problem or warning. By using this function, the operator can be notified of a projector’s status or problems even when the operator is in a different location from the projectors. q • Up to three addressees (destinations) can be registered and messages can be sent to all of them at once. • If a critical problem devel

  • Epson EMP Monitor, High-temperature warning Error information: Shows a notification or warning/problem status using the following icons. Clean Air Filter Notice Lamp Cover Open Replace Lamp *4 Lamp Error High-temperature warning Lamp failure at power on Replace Air Filter High internal temperature error No Air Filter Internal Error Low Air Flow Fan error Air Flow Sensor Err. Sensor error Low air flow error Supply System Error (Ballast) Air filter air flow sensor error Auto Iris Error Other error *1 When Temperature level display

  • Epson EMP Monitor, Power off and normal status Power off and abnormal status Lamp Hours: Shows the lamp operating time for the projector. Source: Shows the input source that has been selected for the projector. Computer or Computer1 DVI or HDMI (Digital) Computer2 D-Video BNC EasyMP S-Video USB Display Video(RCA) USB Video(BNC) LAN Temperature level: The following five icons display the differing internal temperature status of the projector. Internal temperature normal High-temperature warning Internal temperature normal

  • Epson EMP Monitor, EMP Monitor lets you carry out operations such as checking the statuses of multiple EPSON projectors that are connected to a network at a computer monitor, and controlling the projectors from the computer. Following are brief descriptions of the monitoring and control functions that can be carried out using EMP Monitor. • Registering projectors for monitoring and control Projectors on the network can be searched for automatically, and you can then select projectors to be registered from the projectors that are detected. You can enter the IP addresses for target proj

  • Epson EMP Monitor, You can use the application lock to prevent third parties from operating the projectors using EMP Monitor and from changing settings without authority. Opening and closing EMP Monitor and status monitoring can still be carried out even when the application lock is applied. In addition, when a password has been set, the password must be entered in order to cancel the application lock. This ensures that the application lock can not be easily cancelled, and thus improves system security. Switching application lock between enabled

  • Epson EMP Monitor, Displaying group properties Procedure You can use either of the following methods to display the properties. • Displaying the properties for all groups in Grouping view Right-click in Grouping view and select Property. • Displaying properties for specified groups Right-click an icon in Grouping view and then select Property. If you double-click in a line, the properties for that group or projector will be displayed. Displaying projector properties Right-click on a projector icon in Grouping view or Detail list view and select Pr

  • Epson EMP Monitor, Procedures for registration Procedure A Select the projector(s) to be registered from the displayed list, and then click "Edit". The following window will be displayed. Make the necessary settings while referring to the following table. Display name Enter the name of the projector(s) to be displayed in Grouping view or Detail list view. Up to a maximum of 32 bytes can be entered. A space cannot be used as the first character. Display icon Select the icon(s) to be displayed in Grouping view or De

  • Epson EMP Monitor, q You can also carry out this operation by selecting New - Group from the Edit menu. B When the setup is complete, click "Register" to start the registration. When the message is displayed, click "OK". The icon(s) of the projector(s) you registered will be displayed in Grouping view or Detail list view. C Right-click the projector icon(s) to register to the group you have created in Grouping view or Detail list view, and select "Edit". q You can also carry out this operation by selecting Edit in the Edit menu. D In t

  • Epson EMP Monitor, q You can also carry out this operation by selecting New - Projector (manual registration) from the Edit menu. B Enter the IP address of the projector to be registered in the "IP address" box and then click "Search". When the message is displayed, click "OK". If using a serial W TCP/IP conversion adapter and cable to connect the projector, select Use Serial W TCP/IP conversion adaptor. Enter the port number in Port Number and then click Search. C After searching is complete, enter the information for the projecto

  • The line colors in the Timers list have the following meanings: Current day's timer setting When some of the projectors in the group have timer setting enabled and others have it disabled for the current day's timer setting When the current day's timer setting is a disabled setting Timer setting for a day other than the current day The det

  • Epson EMP Monitor, Cancelling (deleting) projector registrations The registrations for projectors can be deleted if they are no longer required for monitoring or control using EMP Monitor. Procedure Right-click the icon for the projector or group that is to be deleted in Grouping view or Detail list view and select "Delete". When the message is displayed, click "OK". More than one projector can be selected for deleting by selecting in Grouping view or Detail li

  • Epson EMP Monitor, All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of:

  • Epson EMP Monitor, Compatible computers Only Windows is supported. OS Windows 98 Second Edition SP1 Windows Me Windows NT4.0 SP6 Windows 2000 Professional SP4 The following 32-bit operating systems: Windows XP Home Edition SP2 or later Windows XP Professional SP2 or later Windows Vista (All editions except Starter Edition) Windows Vista SP1 (All editions except Starter Edition) • Internet Explorer Ver. 5.0 or later must be installed. CPU Pentium MMX 166 MHz or higher (Pentium II 233 MHz or higher recommended) Memory capacity 64 MB or more (128 MB or more rec

  • Epson EMP Monitor, You can monitor using either of the window layouts below. • Grouping view This view lets you check the status of group registrations in a hierarchical diagram. Grouping view • Detail list view This view lets you display the status of each projector as a list so that the projectors can be checked in detail. You can also display specific items as a list, and sort display items using a specific row as a sort key. Detail list view • How to switch views Grouping view and Detail

  • Epson EMP Monitor, C To end the registration operation, click in the top-right corner of the window or click "Cancel". The icon(s) of the projector(s) you registered will be displayed in Grouping view or Detail list view. Refer to s "Monitoring window layout" p.19 for details on using the Grouping view and Detail list view. Setting the range of addresses to do an automatic search and registration q Projectors that are using a serial W TCP/IP conversion adapter cannot be detected. Procedures for automatic search Procedure A Ri

  • Epson EMP Monitor, Meanings of symbols used............................. 2 EMP Monitor Features Tasks that can be done using EMP Monitor..................... 5 Operating environment...................................... 6 Compatible computers........................................... 6 Installing EMP Monitor............................................6 Limitations imposed by a Windows Vista environment......................6 Before starting operations.........................................7 Using EMP Monitor Registering and deleting projectors for monitoring............. 9 Starting EMP Monitor............................................ 9 Registering projectors using automatic search

  • This operation is carried out when starting EMP Monitor for the first time after it has been installed and when you would like to add projectors. Once a projector has been registered, the status for the projector will be displayed automatically each time EMP Monitor is started from that point onwards. Starting EMP Monitor Procedure A Click Start -

  • Epson EMP Monitor, The icon patterns are explained below. No problem Problem Procedure A Select "Environment setup" from the Tool menu. The Environment setup window will be displayed. B Select "Resident in the task tray". C Click "OK". q • Right-click the icon in the system tray to open a pop-up menu to select the Open the main screen or Exit. • If Register at startup in the Environment setup is selected, EMP Monitor starts automatically wh

  • Epson EMP Monitor, The icon patterns and their meanings are explained below. Group No warnings or problems All projectors in the group are normal. Warning or problem A projector in the group has a warning or problem status. Notification A projector requiring immediate attention has been detected within the group. Monitoring disabled The projector is not being monitored. If you right-click the icon and select Monitoring enabled, the projector will be added to the projectors that are being monitored. Data being updated Projector No warnings or problems *1 Warning or problem Notification Monitoring disabled Data

  • Carrying out control using control buttons Click the icon of a projector to be controlled in Grouping view or Detail list view, and click a control button to enable control of only that selected projector. You can also enable control of all selected projectors by selecting more than one projector in Grouping view or Detail l

  • If the projector experiences a problem or enters a status requiring attention, an e-mail like that shown below is sent to the address specified for Recipient mail address. If there is more than one problem, warning, or status, the corresponding messages are output to separate lines. Item Details shown E-mail subject [Display name display

  • Epson EMP Monitor, Projectors cannot be monitored or controlled Cause Remedy Is the projector connected to the network correctly? Check that the network cable has been connected correctly. If the cable is not connected correctly, reconnect it. Has the projector been set up correctly for connection to the network? Check the settings for the Network configuration menu command. s Projector's User's Guide Has EMP Monitor been installed on the computer correctly? Uninstall EMP Monitor and then re-install it. s p.6 Are all the projectors that you want to control or monitor registered? Register the projectors. s p.9 Is

  • Epson EMP Monitor, Registering projectors using automatic search (Searching for and registering projectors that are located in the same segment) Procedures for automatic search Procedure A Right-click in Grouping view and select "New" - "Projector (automatic search)". The Create new projector (automatic registration) window will be displayed. If Detail list view is displayed, select New - Projector (automatic search) from the Edit menu. B Click "Search". Automatic searching will be carried out, and the names of t

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 OFF CARR Mizar Europa Instruction manual off-carr/mizar-europa-JT6.pdf 26 Aug 2023 7
2 Dynasty Spas SC-MP-DY5 Quick reference card dynasty-spas/sc-mp-dy5-17H.pdf 09 Aug 2022 2 0.36 Mb
3 Samsung 152MP Operation & user’s manual samsung/152mp-1D4.pdf 02 Jan 2023 70 1.75 Mb
4 Fiio M7 Complete user's manual fiio/m7-XTT.pdf 23 Aug 2022 26
5 Reflex Lexicon Service manual reflex/lexicon-VF4.pdf 07 Oct 2023 49
6 Fender SRM 6302 Owner's manual fender/srm-6302-N34.pdf 27 Dec 2023 16 1.68 Mb

Similar Resources:

  • Philips

    150S5FS

    (89 pages)
    e-Manual Philips LCD Monitor Electronic User’s Manual file:///D|/My%20documents/dfu/W5/english/150s5/index.htm6/7/2004 11:14:28 AM …
  • Tote Vision

    LCD-1048HD

    (1 pages)
    10.4" TFT LCD active matrix2 x CCFT[Composite, component, & S-Video, NTSC/PAL auto sensing] analog RGB0.206 (H) x 0.206 (V)mm1024(H) x 768(V) [700 lines for CCTV] or 786,432 dots350 cd/m² (Nit)262,144500:190/90/90/90 degreesRGB Vertical Stripe5W x 2, 8 ohm19" x 7" x 2" (Occupies 4 RU or 5 RU - call to confi rm)269 x 229 x 47mm / 10. …
  • ViewSonic

    VA2431wma

    (25 pages)
    ViewSonic®VA2431wmaLCD DisplayModel No. : VS12996IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is als …
  • Samsung

    7+ series

    (60 pages)
    USER MANUAL7 SERIESThank you for purchasing this Samsung product.To receive more complete service, please register your product at www.samsung.com/registerModel_________________ Serial No._______________________KS7000_XC_BN68-07864B-00_L04.indb 1 2016-03-16 �� 11:15:42 …
  • AXE

    MMX-RS Series

    (2 pages)
    AXE 5 Digit DISPLAY (24x48mm) MMX-RS series ■ Features ◎ Readout Range from -19999~99999 ◎ Modified inside parameter, must have pass code ◎ RS485 Communication interface, Protocol MODBUS RTU MODE ◎ EEPROM Saving, data safekeeping about 10 years ◎ BAUD RATE:19200/9600/4800/2400 …
  • Samsung

    Mercury-27T

    (84 pages)
    Mercury-27TDP700A7DSERVICEMANUALDP700A7DContents1.Precaution2.Introduction3.DesassemblyandReassembly4.Troubleshooting5.SystemWireDiagramRefertotheservicemanualintheGSPN(seetherearcover)formoreinformation. …

Monitor Instructions:

Comments, Questions and Opinions: