Epson Connect-It P7 Brochure

Text of Epson Connect-It P7 User Guide:

• Epson Connect-It P7, Epson Specialized Interface Modules P7 IBM Interface Modules • IBM Model 3/4 ® emulation and 4610 Native mode support • Legacy system investment protection • No external power supply needed • Uses existing IBM printer cable • Stored graphic logos in non-volatile printer memory • Easy installation Ease of use Epson printers with Connect-It interfaces are easy to install. Simply disconnect your old printer and connect your new Epson printer to the existing IBM interface cable and you’re ready to print. It doesn’t get any easier than that! Standard functional operation The Epson P7 module uses a micro- control

• Epson Connect-It P7, Epson P7 Modules Epson America, Inc. • 3840 Kilroy Airport Way • Long Beach, CA 90806 • (562) 290-5304 • http://pos.epson.com ©2008 Epson America, Inc. Epson and ESC/POS are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Connect-It is a trademark of Epson America, Inc. All other trademarks are property of their respective owners. Specifications are subject to change without notice. SD-DSP7B Specialized Interface Modules Systems Supported IBM 4683, 4684, 4693, 4694, SurePOS 700 Protocol & Commands IBM

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• Ryobi 4950301 (16 pages) OPERATOR'S MANUALROUTER MOUNTING KIT4950301(FOR USE WITH BT3000 AND BT3100 TABLESAWS)Your new router mounting kit has been engineered and manufactured to Ryobi's high standard for dependability, ease ofoperation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.WARNING: To reduce the risk of injur …

• Motorola SVG2500 (147 pages) This document is uncontrolled pending incorporation in PDM 1 OVERVIEW 15 Security The SVG2500 provides the following: • A firewall to protect the SVG2500 LAN from undesired attacks over the Internet • For wireless transmissions, data encryption and network access control Network Address Translation (NAT) provides some security because the IP addresses …

• THOMSON Technicolor TG582n (3 pages) Technicolor TG582n – Configure as a Wireless Access Point Interface Emulator can be found at: http://techietools.co.uk/router/Technicolor/TG582n The following guide shows how to configure the Thomson TG582n router as an access point on an existing network. With DHCP enabled on the network In order for this to work you must not be connected to the rou …

• Panasonic WV-CU161C/G (168 pages) Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.The model number is abbreviated in some descriptions in this manual.Model No. WV-CU161C/BWV-CU161C/GSystem ControllerOperating InstructionsSystem Controller WV-CU C541SHIFTESCALARMALARMOPERATERESETCAMERASETUPSETUPSLOWP …

• ZyXEL Communications P-2601HN-F1 Series (15 pages) www.zyxel.comADSL2+ IAD with 802.11n WirelessFirmware Version 3.10Edition 1, 10/2010P-2601HN(L)-F1 SeriesDEFAULT LOGIN DETAILSIP Address: http://192.168.1.1Username adminPassword 1234Copyright 2010ZyXEL Communications Corporation …

• TP-Link TD-VG3631 (21 pages) 1 If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your computer to the port labeled “LAN 1~4” on the Modem Router with an Ethernet cable. Connet the LINE port on the splitter to the wall jack using a telephone line. Then use the other telephone line to connect the MODEM port on th …

Comments, Questions and Opinions: