Manualios.com

Epson C850081 ( Color Calibrator) Operation & User’s Manual

  • C850081 ( Color Calibrator) Other
  • maiAxSOvrh8iI
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 44

Epson C850081 ( Color Calibrator) Manual Online:

3.8, 790 votes
Epson C850081 ( Color Calibrator) User Manual
Epson C850081 ( Color Calibrator) User Guide
Epson C850081 ( Color Calibrator) Online Manual

Text of Epson C850081 ( Color Calibrator) User Guide:

  • Epson C850081 ( Color Calibrator), vi Contents Chapter 4 Calibrating Your System to Another Modifying the ICC Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Preparing to measure the standard color chart . . . . . . . . . 4-1 Measuring the chart and updating the profile . . . . . . . . . . 4-4 Using a custom color chart to update your ICC profile . . 4-6 Applying the Modified ICC Profile. . . . . . . . . . . . . . . . . . . . . . . . 4-8 Index

  • Calibrating Your Printing System 3-9 3 4. Click the Calibration button, or press the measure button at the top of the calibrator to measure the color. Note: Do not measure the sheet under strong light or direct daylight; otherwise the measurement may be inaccurate. 5. Repeat steps 2 and 3 until every block of the calibration sheet is measured, then cl

  • Epson C850081 ( Color Calibrator), Index 1 Index A AC adapter , 1-1 , 2-4 B Black base paper , 1-1 , 3-8 , 4-4 C Calibrating Color Calibrator , 3-2 to 3-4 RIP to printer , 3-1 to 3-11 RIP to vendor’s printer , 4-1 to 4-10 Calibration sheet , 3-5 to 3-9 Color Calibrator calibrating , 3-2 to 3-4 connecting to computer , 2-2 parts , 1-2 Color charts custom , 4-6 to 4-7 standard , 4-1 to 4-6 Color pad , 1-1 , 3-2 to 3-4 Color profiles applying , 3-10 to 3-11 creating , 3-8 to 3-9 See also ICC profiles ColorWise Pro Tools , 2-5 , 3-5 , 3-10 , 4-8 to 4-10 Custom color chart ,

  • 3-2 Calibrating Your Printing System Calibrating the EPSON Color Calibrator Measure the included color pad to calibrate your Color Calibrator. Follow the steps below: 1. Double-click the EPSON Color Calibrator folder. 2. Double-click the Printer Calibrator utility icon. The following dialog box appears: 3. To begin calibrating your Color Calibrator, c

  • Epson C850081 ( Color Calibrator), Setting up Your Color Calibrator 2-3 2 If you are using a Macintosh, connect the Y-cable to your modem port. 3. Connect the Y-cable’s 8-pin connector to the back of the calibrator as shown below:

  • Epson C850081 ( Color Calibrator), 4 Calibrating Your System to Another 4-7 The following dialog box appears: Before measuring the custom chart, you need to enter information about the chart in this dialog box. 3. Enter the number of color density steps between 0% and 100% in your chart. If there are four or more steps, type 4. 4. Enter the density percentage for each step in the boxes as shown below. If your sample has more than six total steps, choose four suitable steps. 5. After you finish making the settings, click Apply. 6. Follow the steps under “Preparing to measure the standard color chart” on page 4-1 from step 5. Then

  • Epson C850081 ( Color Calibrator), 3-6 Calibrating Your Printing System 3. Click the Calibrator button. The following dialog box appears: 4. Make sure EPSON Color Calibrator is selected in the list box under Select Measurement Method. Then select a paper type from the Calibration Set list box. You can choose from the following paper types: PQ Ink Jet Paper PQ Glossy Paper Dupont EPSON Glossy Paper Dupont EPSON Matte Paper Dupont EPSON Publication Paper 5. Click the Print button under Generate Measurement Page.

  • Epson C850081 ( Color Calibrator), Unpacking the Color Calibrator 1-1 1 Chapter 1 Unpacking the Color Calibrator Contents When unpacking your EPSON Color Calibrator, make sure the following items are included: color pad Y-cable calibrator Mac-PC serial converter software CD-ROM AC adapter and AC cable (127, 220, 230, 240 volts) black base paper AC adapter (110, 120 volts)

  • 4 Calibrating Your System to Another 4-9 4. Click the name of your custom profile in the Description box on the left. 5. Click the green triangle at the center of the Profile Manager window. A message appears confirming that your custom profile was downloaded successfully. 6. Click OK. Your custom profile appears in the right window. 7. Click the name of your custom prof

  • Epson C850081 ( Color Calibrator), Setting up Your Color Calibrator 2-5 2 Installing the Utility Software Follow the steps below to install the calibrator software: 1. Turn on your computer. 2. Insert the software CD-ROM included with your Color Calibrator into your drive. 3. Start the installation program and follow the on-screen instructions. Note: Although you can install the utility software when the calibrator is not connected to your computer, you can’t use the software unless the calibrator is connected.

  • Epson C850081 ( Color Calibrator), Calibrating Your Printing System 3-5 3 Printing a Calibration Sheet Before you start, make sure you have coated or glossy paper loaded in your printer. Cut sheet paper is recommended if you’re using the EPSON Stylus Pro 9000. Follow these steps: 1. If necessary, start the ColorWise Pro Tools application. Note: The location and type of file that you need to click to start the program depends on where it was installed on your computer and your computer’s operating system. If you need help starting the program, consult the person who installed it on your computer, or refer to your EPSON RS-5000 or RS-5100 documentation. 2. In the dialog box that appears, click the name of th

  • Epson C850081 ( Color Calibrator), ii Declaration of Conformity According to ISO/IEC Guide 22 and EN 45014 Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Representative: EPSON EUROPE B.V. Address: Prof. J. H. Bavincklaan 5 1183 AT Amstelveen The Netherlands Declares that the Product: Product Name: Color Calibrator Model: G740A Conforms to the following Directive(s) and Norm(s): Directive 89/336/EEC: EN 55022 Class B EN 50082-1 EN 61000-3-2 (Using AC Adapter Model EU-20) EN 61000-3-3 (Using AC Adapter Model EU-20) IEC 801-2 IEC 801-3 IEC 801-4 January, 1999 H. Horiuchi President of EPSON EUROPE B.V.

  • Epson C850081 ( Color Calibrator), Setting up Your Color Calibrator 2-1 2 Chapter 2 Setting up Your Color Calibrator To set up your calibrator you need to connect it to your computer, then install the utility software. Note: ❏ Before you install the calibrator software, the RS-5000 version 1.3 or RS-5100 user software must be installed. See your RIP documentation for installation instructions. ❏ The illustrations in this manual are taken from both Windows and Macintosh computers and may vary slightly from what appears on your screen.

  • Epson C850081 ( Color Calibrator), Color Calibrator All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurr

  • Epson C850081 ( Color Calibrator), 4 Introduction System Requirements Before using this product, make sure that your system meets the following requirements. For Windows Users System: Microsoft ® Windows ® 95, Windows 98, or Windows NT 4.0 Display: Color monitor, 800 × 600 screen resolution (higher recommended), and 65,000 colors (higher recommended) Note: Color and tone reproduction are subject to the display capability of your computer system, including the video card, display monitor, and software. See the documentation for those products for details. CPU: Pentium or higher Memory: 16 MB RAM (32 MB recommended) Hard disk: 50 MB or more free

  • Epson C850081 ( Color Calibrator), Contents v Contents Introduction Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Where to Get Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Chapter 1 Unpacking the Color Calibrator Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Epson C850081 ( Color Calibrator), 2-2 Setting up Your Color Calibrator Connecting the Calibrator to Your Computer Follow the steps below to connect the calibrator to your computer: 1. Make sure your computer is turned off. 2. If you are using a PC, connect the Mac-PC serial converter to the Y-cable as shown below. Then connect the Y-cable to one of your serial ports and tighten the screws to stabilize the connection.

  • Epson C850081 ( Color Calibrator), Calibrating Your Printing System 3-1 3 Chapter 3 Calibrating Your Printing System Use your Color Calibrator to calibrate your EPSON Stylus Pro printing system at the following times: ❏ When you set up the system for the first time ❏ After the system has been overhauled or repaired ❏ Before using the system after a long period of inactivity Calibrating your printing system is a multi-step process. Be sure to follow all the instructions in this chapter in the order they appear.

  • Epson C850081 ( Color Calibrator), 4 Calibrating Your System to Another 4-1 Chapter 4 Calibrating Your System to Another Modifying the ICC Profile To calibrate your RS-5000 or RS-5100 to the printer you will ultimately use for your final product, you need to obtain a printout from your vendor. EPSON recommends using a printout of one the standard color charts. See the instructions below. If you want to use a printout of a color chart from your printing vendor, rather than the provided chart, see “Using a custom color chart to update your ICC profile” on page

Related Products and Documents (Other):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Makati 416-832 Extendible PABX System Operation & user’s manual makati/416-832-extendible-pabx-system-1NH.pdf 27 Mar 2023 18
2 Makita EM2650UH Instruction manual makita/em2650uh-5A8.pdf 26 Dec 2022 188
3 Whirlpool WRS342FIAM00 Operation & user’s manual whirlpool/wrs342fiam00-T68.pdf 18 Aug 2022 16
4 Bogen CAM2 Specifications bogen/cam2-79H.pdf 04 Feb 2023 2 0.42 Mb
5 NETGEAR FSM726 - ProSafe Managed Switch Datasheet netgear/fsm726-prosafe-managed-switch-1V4.pdf 01 Sep 2022 2
6 True Fitness TSSU-27-12M-B Specification sheet true-fitness/tssu-27-12m-b-2-P84.pdf 18 Apr 2023 2 0.15 Mb

Similar Resources:

  • Roland

    SD-20

    (276 pages)
    As of January 15, 2005 (EDIROL-1)Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below.EUROPE EDIROL (Europe) Ltd. Studio 3.4 114 Power Road London W4 5PYU. K.TEL: +44 (0)20 8747 5949FAX:+44 (0)20 8747 5948http://www.edirol.com/europeDeutschlandTEL: …
  • Schwinn

    460 Elliptical

    (56 pages)
    Assembly ManualInstrucciones para el montajeInstructions de montageNautilus® Bowflex® Schwinn® Fitness StairMaster® Universal® Nautilus Institute®460 Elliptical Trainer001-7311-081408B …
  • Omron

    MS2800

    (16 pages)
    » Rapid alignment and troubleshooting» No software, no console, no problem» Standard connection and mountingSafety light curtains MS2800 & MS4800SIMPLICITY WITHOUT LIMITATION …
  • VALERA

    CF 50

    (2 pages)
    CF 50High Capacity UndercounterGlasswasher• 500 x 500mm square basket• Simple push button operation• Fast wash cycle• Fitted detergent & rinse aiddosers• Ideal high capacityglasswasherHeavy duty, high volume Glasswasherwith 500 x 500 basket. Durableconstruction in double skinned andinsulated stainless steel.Simple to maintain, non-metallic wash …
  • ReelCraft

    SW7000 Series

    (12 pages)
    Operating InstructionsReelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605Customer Service: 855-634-9109 • [email protected] • www.reelcraft.comSeries SW/TW7000 Welding Hose ReelsLow Pressure Model Numbers:TW7400 OLP TW7450 OLP TW7460 OLP SW7600 OL …
  • Hasselblad

    XPAN 5.6-30

    (2 pages)
    LENSESwww.hasselblad.com1/2Document ID: 3024013/0610CLOSE FOCUS RANGE DATA:Minimum distance object to film 0.70 mCorresponding distance object to front lens 0.62 mMaximum image scale 1: 20Corresponding area of coverage 48 x 130 cmCorresponding exposure reduction 0.1 f-stopXPanHASSELBLAD 5.6/301008060402000 10 20 30Image height (mm)f/5,6MTF (%)100806040 …

Comments, Questions and Opinions: