Epson EH_-DM3 Operation & User’s Manual

Text of Epson EH_-DM3 User Guide:

• Epson EH_-DM3, 58 Image page When the color mode is set to “Auto”, you cannot make the setting. sp. 25 Signal page Setting Item Setting Contents Brightness Adjusts the image brightness. Contrast Adjusts the difference between light and shade in the images. Color Saturation Adjusts the color saturation for the images. (This is not displayed when a computer is connected.) Tint Adjusts the image tint. (This is not displayed when the external video or computer connected is not NTSC.) Sharpness Adjusts the image sharpness. Color Temp. Adjusts the entire image tint. High: Makes the image bluish. Low: Makes the image reddish. Auto Iris Adjusts the light intensity according to the brightness

• Epson EH_-DM3, 46 This unit automatically detects input signals and changes the projected image. The projector automatically detects signals being input from connected equipment, and the image being input from the equipment is projected. You can project the target image quickly as input ports with no image signal being input are ignored when you change by pressing the . 1 Open the lens cover and press . 2 Turn the device power switch on, and press the [Play] or [Playback] button on the video device. 3 Press to start detecting input signals. When two or more pieces of equipment are connected, press

• Epson EH_-DM3, 69 Appendix Replacing the lamp 1 Turn the power switch off, and when a short beep sounds, unplug the power cable. 2 Loosen the screws of the lamp cover attachment using the screwdriver that supplied with the replacement lamp. Slide the lamp cover toward you, and then lift it up to remove it. 3 Loosen the lamp attachment screws. 4 Take out the old lamp. 5 Install the new lamp. Caution The lamp is hot immediately after use. Once the power has been switched off, allow approximately one hour to pass before replacing the lamp to a

• Epson EH_-DM3, 26 Advanced Operations Some discs have the following kinds of original menus saved in them. •Root Menu: When multiple titles (image and audio) have been recorded, this integrated disc information is displayed. •Menu: Title-specific playback data (chapter, angle, audio, and subtitle menus) is displayed. 1 Press during playback. 2 Press and select the item you want to see. You can also select the title number or chapter number directly using the numeric buttons. Becoming a playback expert To display the top menu Press and hold for about 3 seconds to display the top menu. When using the numer

• Epson EH_-DM3, 73 Appendix Composite video Units: Dots * Letterbox signal Component video Units: Dots * Letterbox signal HDMI Units: Dots Compatible Resolution List Signal Resolution Aspect Mode Normal Full Zoom TV (NTSC) 720 x 480 720 x 360 * 720 x 540 (4:3) 960 x 540 (16:9) 960 x 540 (16:9) TV (PAL, SECAM) 720 x 576 720 x 432 * 720 x 540 (4:3) 960 x 540 (16:9) 960 x 540 (16:9) Signal Resolution Aspect Mode Normal Full Zoom SDTV (480i, 60Hz) 720 x 480 720 x 360 * 720 x 540 (4:3) 960 x 540 (16:9) 960 x 540 (16:9) SDTV (576i, 50Hz) 720 x 576 720 x 432 * 720 x 540 (4:3) 960 x 540 (16:9) 960 x 540 (16:9) SDTV (480p) 720 x 480 720

• 34 You can set titles, chapters, and tracks to playback in your order of preference. 1 Press during play or when paused. The program screen will appear for you to set a playback sequence. 2 Using the numeric keys, enter title and track/chapter numbers sequentially. s “When using the numeric buttons” p. 26 • Use to shift the cursor in respective directions. • If the disc

• Epson EH_-DM3, 81 POLAND : EPSON EUROPE B.V. Branch Office Poland ul. Bokserska 66 02-690 Warszawa Poland Hotline:(0) 801-646453 Web Address: http://www.epson.pl PORTUGAL : EPSON Portugal R. Gregorio Lopes, nº 1514 Restelo 1400-195 Lisboa Tel: 213035400 Fax: 213035490 Hotline: 707 222 000 Web Address: http://www.epson.pt ROMANIA : EPSON EUROPE B.V. Branch Office Romania Strada Ion Urdareanu nr. 34 Sector 5, 050688 Bucuresti Tel: 00 40 21 4025024 Fax: 00 40 21 4025020 Web Address: http://www.epson.ro Russia : EPSON CIS Schepkina street, 42, Bldg 2A, 2nd floor 129110, Moscow, Russia Phone +7 (495) 777-03-55 Fax +7 (495) 777-03-57 Web Address: http://www.e

• Epson EH_-DM3, 52 Settings and Adjustments The settings of this unit can be adjusted to suit the environment in which it is used. 1 Press during playback or when stopped. The following setup menu is displayed. 2 Press and select the desired icon. Setup Menu Operation and Functions Using the setup menu Language setup Others setup Audio setup

• 21 Quick Start If the unit is tilted by up to 30° degrees in an upward or downward orientation, you can correct the image shape. However, it will be difficult to focus if the tilt angle is large. Correcting keystone distortion of the image (Keystone) • Adjusting the height of your image This unit automatically detects vertical tilt and corrects the images that

• Epson EH_-DM3, 36 When a disc has been recorded with multiple audio signals or languages, you can switch to the available audio signal or language of your preference. 1 Press during playback. The current audio settings are displayed on the screen. 2 Select the desired settings by pressing repeatedly. You can choose whether or not to display subtitles for discs that have been recorded with subtitles. If a disc has multiple language subtitles, you can switch to the preferred language. 1 Press during playback. The current subtitle settings are displayed on the screen.

• 15 Name Function A Remote control light- emitting area Emits remote control signals. sp. 16 B Turns power supply to the unit on or off. sp. 22 C Corrects keystone distortion of the screen image to square or rectangular. sp. 21 D Press this button to eject a disc from the disc slot. sp. 22 E Function/numeric toggle switch Switches between the functions and n

• 50 You can connect to AV amplifiers and so on or equipment capable of making digital recordings when they are equipped with a coaxial digital audio input port. When connecting, use a commercially available coaxial digital cable. When you turn the Virtual surround sound function on, you can enjoy real stereo sound although sound is usually provided through multiple spe

• Epson EH_-DM3, 75 Appendix The file format must meet the following requirements • Resolution: up to 720 x 576 • GMC (global motion compensation) point: Up to one • Bit rate: CD: 5.6 Mbps DVD: 19Mbps USB: 5.57 Mbps (However, this may be slower depending on the performance of the USB storage.) Compatible MPEG format list Extension Video Codec Audio Codec Resolution .AVI MPEG-1/MPEG-2/ MPEG- 4(Advanced Simple Profile) PCM/ADPCM/MPEG/ MP3/WMA/AC3/DTS PAL: 25 Hz 720 x 576 or less NTSC: 30Hz 720 x 480 or less .VID/.DIV/ .DIVX(Home Theater)/ .XVID MPEG-4(Advanced Simple Profile) PCM/ADPCM/MPEG/ MP3/WMA/AC3/DTS

• Epson EH_-DM3, 61 Appendix Appendix You can check the status of this unit using the indicators on the top panel. Check each condition in the following table and follow the steps to remedy the problem. * If all indicators are not lit, the power cable is not connected correctly or the unit is not powered. Troubleshooting When the or indicators flash orange Warning : lit : flashing : off High Temperature alarm You can continue projecting in this state. Projection stops automatically if subsequent high temperatures are regi

• 3 Follow these safety instructions when setting up and using the projector : • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not inst

• Epson EH_-DM3, 64 If this unit is not functioning normally, check the following notes before requesting repairs. However, if the unit fails to improve, contact your dealer for advice. At these times Check here Reference page Power does not turn on • Did you press ? sp. 18 • Disconnect and reconnect the power cable. sp. 18 • Is the unit cooling down? sp. 63 • If the indicator goes on and off when you touch the power cable, turn off the main power switch then disconnect and reconnect the power cable. If the unit fails to improve, it is possible that the

• Epson EH_-DM3, 48 Connecting commercially available headphones. Audio Settings Caution • When listening with headphones, make sure the volume is not too high. You may damage your hearing when listening to sounds at high volume over an extended period of time. • Do not set the volume too high from the outset. A loud sound may be produced suddenly that may cause damage to your headphones or your hearing. As a precaution, lower the volume before you switch off this unit then raise it gradually after you switch it back on. Once you have connected your headphones to the headphone jack, no sound will come from the speakers. Listening with headphones Headphones To jack

• Epson EH_-DM3, 9 • The LCD panel is manufactured using extremely high-precision technology. However, black dots may appear on the panel, or some red, blue or green dots may light up extremely brightly at times. Furthermore, sometimes striped color irregularities or brightness irregularities may also appear. They are caused by the characteristics of the LCD panel, and are not a sign of malfunction. • Screen burn may remain in the projected image when a high-contrast still image is projected for more than 15 minutes. If screen burn has occured, you should project a bright screen (if

• Epson EH_-DM3, 63 Appendix When the or indicators are off Normal : lit : flashing : off Standing-by Shows that the unit is ready to be used. During warming up (Approx. 30 sec) In warm-up mode, pressing has no effect. Do not unplug the power cable during warm-up. This may reduce the lifespan of the lamp. Projection in Progress Cooling down The operation of all remote control and main unit buttons is suspended during cool- down. Enters stand-by mode once cool-down has completed. Do not unplug the power cable during cool-down. This may reduce the lifespan of the lamp. Break Press to return

• Epson EH_-DM3, 1 Quick Start Advanced Operations Settings and Adjustments Appendix Contents..................................................................... 1 Safety Instructions..................................................... 2 Use and Storage......................................................... 8 Discs and USB Storage ............................................. 10 Parts Name and Functions......................................... 12 Preparing the Remote Control................................... 16 Quick Start Installation................................................................. 18 Projection distance and screen size ............................................ 18 Connec

• Epson EH_-DM3, 60 The projector includes the following security devices to prevent from being stolen. • Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. You can find details about the Microsaver Security System on the Kensington homepage http://www.kensington.com/. • Security cable installation point A commercially available theft-prevention wire lock can be passed through the installation point to secure the projector to a desk or pillar. Installing the wire lock Pass an anti-theft wire lock through the handle. See the documentation supplied with the wire lock for locking instructions. Security Functions Anti-Theft Lock

• Epson EH_-DM3, 49 Advanced Operations You can output microphone audio from the projector's speaker by connecting a microphone to the projector's Mic Input Port. To adjust audio from the Mic input port, press . • When the Mic Input Level is too low, adjust it using . sp. 64 • You can select "Mic Input Level" from the Option page in the Visual Setup menu. sp. 59 The projector is compatible with a dynamic mic. It does not support plug-in-power type. Connecting a microphone To Mic Input Port

• Epson EH_-DM3, 67 Appendix Air filter replacement period When the air filter gets dirty or is broken Lamp replacement period • The message “Replace the lamp” appears on the screen when projection starts. • The projected image gets darker or starts to deteriorate. The following optional accessories and consumables are available for purchase if required. This list of optional accessories is applicable as of August, 2009. Details of accessories are subject to change without notice and availability may vary depending on the country or area of purchase. Consumables Optional accessories • In order to maintain the initial brightness and image quality, the lamp replacement message is displayed

• Epson EH_-DM3, 24 Press or during playback or when paused. If you press once during chapter/track playback, playback returns to the start of the chapter or track being played. After this, playback returns to the start of the previous chapter/track each time you press . After this, playback returns to the start of the previous chapter/ track each time you press . Press during paused playback. • A single frame is advanced each time you press . This unit does not have a frame return function. • Press to return to normal play

• Epson EH_-DM3, 18 A Place the unit in a position that will enable the optimum size image to be projected on the screen. When you use a 16:9 ratio, 80” type widescreen, for example, place the unit approximately 241 cm away from the screen. *The distance from the center of the lens to the base of the screen. The further this unit is moved away from the screen, the larger the projected image becomes. Values are just reference. For detailed projection distance values sp. 72 B Position this unit so that it is parallel to the screen. If this unit is not placed parallel to the screen, the projected image is distorted in the shape of a keystone. Installation Projection distance and screen size Scree

• Epson EH_-DM3, 7 Unplug the unit from the outlet before cleaning. This avoids electric shock during cleaning. When cleaning the unit, do not use wet cloths or solvents such as alcohol, thinner or benzine. Water infiltration or deterioration and breakage of the unit case could result in electric shock. Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire, injury or corrosion of the unit. When replacing batteries, take the following precautions. • Insert batteries so that the polarities (+ and -) are correct. • Do not use batteries of different types or mix old and new batteries. • Do not use any b

• Epson EH_-DM3, 42 You can attach a USB memory or multicard reader that conform to the USB 1.1 to the unit and play the following format files. • MP3/WMA files • JPEG files • DivX ® files The file playback and your operations during play are the same as when you play files of a using the standard DVD player. Playback by attaching a peripheral device • When you connect a USB storage device to the unit, the source is changed to the USB and playback starts automatically when: - a disc is being played or stopped on the standard DVD player.

More Instructions:

	Epson EH_-DM3 Operation & user’s manual 24-06-2023 2	DOWNLOAD
	Epson EH_-DM3 Brochure & specs 09-01-2024 6	DOWNLOAD

Related Products and Documents (Projection TV):

Comparable Devices:

Similar Resources:

• Samsung HCM6525W (67 pages) Owner’s InstructionsPROJECTION TELEVISION...............................................................................................................................HCL552W / HCL652WHCL5515W / HCL6515WHCL4715W / HCL473WHCM5525W / HCM553WHCM6525W / HCM653WAA68-01509D(ENG)01509D(E)-FRONT COVER 2004/10/19 09:26 AM Page 1 …

• Epson PowerLite Home 10 (1 pages) Order user replaceable parts from an Epson authorized parts distributor. ---- or ---- Locate an Epson Authorized Service Center to order user replaceable parts by using the “Help me find…” tool in the right column of the Epson Support home page. Order user replaceable parts from an Epson authorized parts distributor. ---- or ---- Locate an Eps …

• Hitachi 61HDX98B (112 pages) CONTENTS... 1999 DP-85 HDTV Projection Television Information NOVEMBER, 1999 Prepared by: ALVIE RODGERS C.E.T. This training package is geared specifically to the 61HDX98B HDTV. However, most of the material will cross over to the 60SDX88B progressive scan HDTV capable set. The necessary und …

• Philips 46PP9302H (8 pages) This section shows you how to make a basic TV connectionusing a cable TV or antenna signal.If you have cable TV service, you’ll simply connect the coaxialcable lead-in from the cable TV company to your TV. If you intendto connect a VHF/UHF antenna, you may need a 300- to 75-ohmadapter, which is not supplied with your TV. NOTE: You should be able to buy opt …

• Sony KP-51WS520 (2 pages) Hi-Scan® Projection Television• 16:9 Hi-Scan 1080i™ Display• HD MICROFOCUS™ CRT and Lens System• DRC™ (Digital Reality Creation™) MultiFunction Circuitry• MID™ X (Multi Image Driver X) Circuitry• CineMotion® Reverse 3-2 Pulldown Technology• Twin-View™ Two Tuner Picture and Picture• 3 D Digital Comb Filter• Flash Focus® Auto and …

• Philips 43P8341 (2 pages) • Digital comb filter• Two-tuner PIP• Multipoint digital convergence• Component video input• Side A/V jacks with headphone and S-Video• Incredible Surround™with dbx®hi-fi stereo sound• Philips ImageMax™technology• Protective filter43P834143" Table Top Projection Television43P8341 …

Comments, Questions and Opinions: