Manualios.com

Toshiba MA-600 Programming Manual

Toshiba MA-600 Manual Online:

3.65, 2876 votes
Toshiba MA-600 User Manual
Toshiba MA-600 User Guide
Toshiba MA-600 Online Manual

Text of Toshiba MA-600 User Guide:

  • 6. TERMINAL FILE PROGRAMMING EO3-11106 6.33 Hourly Range Table Setting 6-143 3) Example To set the following hourly range table: TIME01 until 8:00* TIME02 8:00 to 12:00 TIME03 12:00 to 15:00 TIME04 15:00 to 19:00 *(The first term is automatically continued from 19:00 of the preceding day.) Operation LCD Display Remarks When the ECR is being outside a sale and in S

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.39 Special Rounding Process Setting, 1-digit type 6-161 6.39 Special Rounding Process Setting, 1-digit type For Special Rounding and Denmark/Australia rounding, the pre-rounded value of the least effective digit and the post-rounded value are set here. This operation is effective when the option “Special Rounding ACTIVE” and “1 digit subject to Special Rounding” are selected (System Option Address No. 33, Bit No. 3 SET & Bit No. 4 RESET). Any time outside a sale Mode Lock: SET 1) Menu Tree 2) Operation Flowchart Main Menu ECR is being outside a sale and in SET mode.

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.5 System Option Programming 6-35 System Option Table Standard Bit Set (auto-set by RAM Clear) ADDRESS NO. CONTENTS 0 28 OPTIONAL FUNCTION VI BIT NO. ITEM SELECTIVE STATUS STANDARD STATUS REMARKS RESET ALLOWED * 1 No-sale Entry After Non-add # Entry SET PROHIBITED RESET ANY NUMBER OF TIMES * 2 Number of Times for Non-add # Entries Within a Receipt SET ONLY ONCE ALLOWED RESET ALLOWED * 3 [RF] Op

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.17 Error Item Name Programming 6-89 (continued from the previous page) Operation LCD Display Remarks The [End] key depression allows the ECR to end this programming. A long receipt is issued and the display returns to Main Menu screen. Error Code and Error Item Name Table Error Code Content or Cause of Error Standard Program 1 O P E R A T I O N E R R O R 2 Operation or Key Sequence Error 3 M A N A G

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.25 PLU Preset-Code Key Setting 6-125 • Flat type keyboard 1 8 15 22 29 36 43 50 57 64 71 77 83 90 97 100 2 9 16 23 30 37 44 51 58 65 72 78 84 91 98 101 3 10 17 24 31 38 45 52 59 66 73 85 92 99 102 4 11 18 25 32 39 46 53 60 67 74 79 86 93 103 5 12 19 26 33 40 47 54 61 68 75 80 87 94 104 6 13 20 27 34 41 48 55 62 69 81 88 95 105 7 14 21 28 35 42 49 56 63 70 76 82 89 96 106 3) Example (1) To assign PLU Code 1111 to Key Location Code 55 on the ordinary type keyboard. Ope

  • Toshiba MA-600, 3. CAPACITIES EO3-11106 3.2 Basic Memory Capacities 3- 2 3.2 Basic Memory Capacities (NOTE: For Item Count below, “6 + 2 digits” means that it has 6 integer digits and 2 decimal digits.) Group Memory (Group Name: 12 characters; max. 15 groups) Memory Type Counter or Total Digits Item Count 6 + 2 Amount 10 Item Count 6 + 2 Daily Memory Group Total Amount 10 Item Count 6 + 2 Amount 10 Item Count 6 + 2 GT Memory Group Total Amount 10 Department Memory (Department Name: 16 characters; max. 40 departments) Memory Type Counter or Total Digits Customer Count 6 Item Count 6 + 2 Daily Memory Amount 10 Customer Count

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.5 System Option Programming 6-46 System Option Table Standard Bit Set (auto-set by RAM Clear) ADDRESS NO. CONTENTS 0 42 OPTIONAL FUNCTION XVI BIT NO. ITEM SELECTIVE STATUS STANDARD STATUS REMARKS RESET * 1 -- vacant -- SET RESET * 2 -- vacant -- SET RESET * 3 -- vacant -- SET RESET * 4 -- vacant -- SET RESET * 5 -- vacant -- SET RESET * 6 -- vacant -- SET RESET * 7 -- vacant -- SET RESET NON-PRINT * 8 Consecutive No. Print immediately after the previous daily financial rese

  • 6. TERMINAL FILE PROGRAMMING EO3-11106 6.23 PLU Table Programming 6-117 6.23.2 Deletion To delete a PLU with sales data of zero: Any time outside a sale To delete a PLU with sales data of not zero: After PLU Reset Mode Lock: SET Individual PLU Deletion : The programmed PLU data is deleted individually. 1) Menu Tree 2) Operation Flowchart Main Menu ECR i

  • 2. SPECIFICATIONS EO3-11106 2. SPECIFICATIONS 2- 1 2. SPECIFICATIONS SIZE: 410 mm (width) x 442 mm (depth) x 291 mm (height) (height including rubber feet) Height when the customer display is fully raised: 351 mm WEIGHT: Approximately 13.6Kg POWER REQUIREMENT: AC 220 V to AC 230 V ±10 %; 50/60 Hz ±10 % (QP model) AC 230 V ±10 %; 50/60 Hz ±10 % (GB model) AC 240 V �

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.4 SFKC (Selective Function Key Code) Programming 6-17 SFKC Receipt Sample Standard Keyboard (auto-set by RAM Clear) • Ordinary Type Keyboard LOG/ RECEIPT VALI DATE RECEIPT ISSUE ↑ Del History RF JF 1 6 11 CUR SALES PERSON RTN MDSE ↓ ALL VOID C # 2 7 12 R/A PO NS ITEM CORR ← Rtn 7 8 9 3 8 13 %- PR OPEN X → Dbl 4 5 6 4 9 14 VAT MISC LC OPEN AMT Enter A/a 1 2 3 5 10 15 CRT CPN PLU 0 00 . ST AT/TL CHK TEND • Flat Type Keyboard 18 LOG/ RECEIP

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.5 System Option Programming 6-18 6.5 System Option Programming This operation is used to set the ECR’s basic features and selective functions to meet the requirement of the market and your user. This programming operation is performed in SET mode or BLIND mode. In SET mode, you can select a desired menu item on the LCD display. Address No. 1 to Address No. 29 are programmable. In BLIND mode, you can directly enter a desired Address No. on the keyboard. All system options from Address No. 1 to Address No. 49 are programmable. After Financial Daily Reset For Dealer Sy

  • 6. TERMINAL FILE PROGRAMMING EO3-11106 6.27 VAT or Add-on Tax Rate Setting 6-131 3) Example To set the following VAT rate: VAT1………10% Operation LCD Display Remarks When the ECR is being outside a sale and in SET mode, depress the [↓] key three times. The cursor is moved on to “4 RATE, LIMIT AMOUNT”. Depress the [4] or [Enter] key. “4 RATE, LIMIT AMOUNT” is s

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.8 Store Name Message Programming 6-57 3) Example: To program the following Store Message. Operation LCD Display Remarks When the ECR is being outside a sale and in SET mode, depress the [1] or [Enter] key. Depress the [↓] key twice. The cursor is moved on to “3 STORE MESSAGE”. Depress the [3] or [Enter] key. The message already programmed is displayed. While ? is shown on the upper-right corner of the LCD display screen, the [?] key depression results in that the following guidance message appear

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.16 Display item Name Programming 6-86 (continued from the previous page) Operation LCD Display Remarks The [End] key depression allows the ECR to end this programming. A long receipt is issued and the display returns to Main Menu screen. TEC STORE 1343 PEACH DRIVE PHONE: 87-6437 Open 8:00am to 7:00pm Closed: every Wednesday 31-10-2005 MON #0 DISPLAY NAME #003 BALANCE DUE 0

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.2 Character Entries 6- 10 6.2.2 Direct Character Entry Method Using Keyboard (installed as the ECR Main Keyboard): -- Keyboard layout for programming -- • Ordinary Type Keyboard ↑ Del History RF JF A F K P U ↓ ALL VOID C # B G L Q V ← Rtn 7 8 9 C H M R W → Dbl 4 5 6 D I N S X Enter A/a 1 2 3 E J O T Y PLU 0 00 . ? End Z • Flat Type Keyboard 1 2 3 4 5 6 7 8 9 0 LOG RF JF ↑ ↓ ! @ # $

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.4 SFKC (Selective Function Key Code) Programming 6-16 SFKC Table (continued) SFKC Key Name Memory to be opened (REMARKS) 104 TRF (Transfer) No memory 105 to 107 -- vacant -- 108 AMT (Amount) No memory 109 RPT (Repeat) No memory 110 to 115 -- vacant -- 116 TX3/M (Tax 3 Modifier) No memory 117 to 120 -- vacant -- 121 CUR 1 (Foreign Currency 1) Foreign Currency 1-in-drawer 122 CUR 2 (Foreign Currency 2) Foreign Currency 2-in-drawer 123 CUR 3 (Foreign Currency 3) Foreign Currency 3-in-drawer 124 CUR 4 (Foreign Curr

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.20 Department Preset Price Setting or Changing 6-104 6.20 Department Preset Price Setting or Changing The preset price of each department may be set in the DEPARTMENT TABLE PROGRAMMING already described. However, in setting or changing the price only but not other programmed data, the following operation will be more convenient. Any time outside a sale Mode Lock: SET 1) Menu Tree 2) Operation Flowchart Main Menu ECR is being outside a sale and in SET mode. Depress [↓] twice then [Enter]. or Depress [3]. “3 DP/PLU” for Department/PLU table programming is selected.

  • 6. TERMINAL FILE PROGRAMMING EO3-11106 6.28 Foreign Currency Exchange Rate Setting 6-134 (continued from the previous page) Operation LCD Display Remarks Make sure the cursor is shown on 01CUR1. Then, input 1.20 and depress the [Enter] key. The exchange rate from € to $ is set on the [CUR1] key. While ? is shown on the upper-right corner of the LCD displa

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.2 Character Entries 6- 12 6.2.3 How to use the [History] key The [History] key is used for performing character entries with the name previously entered. Operation: [History] ([↓]) [Enter] 1) The [History] key depression will let the most recently programmed name displayed on the LCD display. 2) The [↓] key depression will let the second most recently programmed name displayed. (Up to 10 programmed names will be displayed in reverse chron

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.40 Special Rounding Process Setting, 2-digit type 6-163 6.40 Special Rounding Process Setting, 2-digit type For Special Rounding and Denmark rounding, the pre-rounded value of the two least effective digit and the post- rounded value are set here. This operation is effective when the option “Special Rounding ACTIVE” and “2 digits subject to Special Rounding” are selected (System Option Address No. 33, Bit No. 3 SET & Bit No. 4 SET). Any time outside a sale Mode Lock: SET 1) Menu Tree 2) Operation Flowchart Main Menu ECR is being outside a sale and in SET mode.

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.40 Special Rounding Process Setting, 2-digit type 6-165 (continued from the previous page) Operation LCD Display Remarks Input 3725, then depress the [Enter] key. Input 6250, then depress the [Enter] key. Input 8775, then depress the [Enter] key. The [End] key depression allows the ECR to end this setting. A long receipt is issued and the display returns to Main Menu screen. TEC STORE 1343 PEACH DRIVE PHONE: 87-6437 Open 8:00am to 7:00pm Closed: every Wednesday 31-10-2005 MON #3001 ROUNDING2 1

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.41 Number of Receipt Print Buffer Line Setting 6-166 6.41 Number of Receipt Print Buffer Line Setting The number of receipt print buffer line is set here. When it reaches the set value, only a receipt print operation starts. This setting is effective only in REG, MGR, and - modes or programming operation. Any time outside a sale Mode Lock: SET 1) Menu Tree 2) Operation Flowchart Main Menu ECR is being outside a sale and in SET mode. Depress [↓] five times then [Enter]. or Depress [6]. �

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.8 Store Name Message Programming 6-55 6.8 Store Name Message Programming A maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt is programmed here. Prior to the Store Name Message Programming, be sure to select SET status for Address No. 31, Bit No. 5 of the system option. Any time outside a sale Mode Lock: SET 1) Menu Tree 2) Operation Flowchart Main Menu Depress [1] or [Enter]. “1 MESSAGES” fo

  • Toshiba MA-600, 6. TERMINAL FILE PROGRAMMING EO3-11106 6.37 Cash Tender key Preset Amount Setting 6-157 6.37 Cash Tender Key Preset Amount Setting A maximum of 6-digit amount is preset to the Cash Key ([CASH 1] to [CASH 3]). When depressing the cash key with preset amount in a registration operation, it will be processed as a tendering operation of the preset amount. Any time outside a sale Mode Lock: SET 1) Menu Tree 2) Operation Flowchart Main Menu ECR is being outside a sale and in SET mode. Depress [↓] five times then [Enter]. or Depress [6]. “6 OTHER” is selected. Depress [↓] three times then [Enter].

  • Toshiba MA-600, EO3-11106 TABLE OF CONTENTS Page 1. INTRODUCTION.........................................................................................................1- 1 1.1 Main Features ...............................................................................................................1- 1 1.2 Description of Model Number ........................................................................................1- 1 2. SPECIFICATIONS ................................................................

Related Products and Documents (Cash Register):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Partner K30 Operator's manual partner/k30-TGR.pdf 03 Nov 2023 16 0.63 Mb
2 EGO LM2100E Operator's manual ego/lm2100e-QFN.pdf 10 Sep 2022 224
3 Radio Shack Micro-44 Owner's manual radio-shack/micro-44-4Q5.pdf 26 Nov 2023 28 0.73 Mb
4 PSB Powered Subwoofers Owner's manual psb/powered-subwoofers-64L.pdf 08 Mar 2024 24
5 ZyXEL Communications MAX-206M2 Operation & user’s manual zyxel-communications/max-206m2-W68.pdf 23 Nov 2022 322
6 Canon Ts-e24mm f/3.5l ii Instructions manual canon/ts-e24mm-f35l-ii-32X.pdf 20 Feb 2023 19 0.49 Mb

Similar Resources:

  • Sharp

    EL-1607P

    (2 pages)
    To insure trouble-free operation of your SHARP calculator, werecommend the following:1. The calculator should be kept in areas free from extremetemperature changes, moisture, and dust.2. A soft, dry cloth should be used to clean the calculator. Donot use solvents or a wet cloth.3. Since this product is not waterproof, do not use it or store itwhere fluids, …
  • Sharp

    XE-A201

    (1 pages)
    XE-A201 Quick Start GuideThe following describes how to get the cash register ready to operate. Follow these steps before you use the cash register for the first time.Before you set up the cash register, prepare three new “AA” batteries which are necessary for memory backup. Find a stable and flat surface not subject to direct radiation, to place the cas …
  • Ingenico

    iCT220

    (2 pages)
    Terminal messagesAMOUNT DUE/BALANCE DUE: A partial authorization has occurred. Ask customer for another form of payment for the remaining balance of the sale. Press ENTER to print the receipt. Pressing CANCEL will not void the transaction.AVS (ADDrESS VErifiCATiON SErViCE): Checks if the street address and ZIP code entered match the customer’s billing addr …
  • Sharp

    XE-A202 - Electronic Cash Register

    (6 pages)
    ELECTRONIC CASH REGISTERCAJA REGISTRADORA ELECTRONICAINSTRUCTION MANUAL MANUAL DE INSTRUCCIONESXE-A202MODELMODELOSharp XE-A202 operating programming USA version ManualSharp XE-A202 operating programming USA version ManualSharp XE-A202 operating programming USA version ManualSharp XE-A202 operating programming USA version Manual …
  • HP

    Rp3000 - Point of Sale System

    (3 pages)
    rp3000 Illustrated Parts & Service Map 506600-002 page 1 Illustrated Parts & Service MapHP rp3000 Point of Sale© 2008, 2009 Hewlett-Packard Development Company, L.P. The informa-tion contained herein is subject to change without notice. HP shall not be lia-ble for technical or editorial errors or omissions contained herein. Intel, Pentium, Intel Ins …
  • Nautilus Hyosung

    MX5300CE

    (177 pages)
    Service Manual MX5300CE System V01.00.03 (2013.05.30) © Nautilus Hyosung, Inc. All Rights Reserved. …

Comments, Questions and Opinions: