Manualios.com

Toshiba ST-A20 SERIES Owner's Manual

Toshiba ST-A20 SERIES Manual Online:

3.95, 915 votes
Toshiba ST-A20 SERIES User Manual
Toshiba ST-A20 SERIES User Guide
Toshiba ST-A20 SERIES Online Manual

Text of Toshiba ST-A20 SERIES User Guide:

  • Toshiba ST-A20 SERIES, 8. TROUBLESHOOTING 8. Troubleshooting 8-1 EO1-12037 8. TROUBLESHOOTING WARNING! If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn the power off, unplug the POS Terminal, then contact the nearest TOSHIBA TEC service representative for assistance Symptom Check Point Solution The power does not turn on. • Is the power cord plugged in correctly? • Is the power supplied to the AC outlet? • Has the circuit breaker blown? • Plug in correctly. • If it is not a power failure, check for the power supply to the AC outlet with another electric appliance. When the power is not

  • Toshiba ST-A20 SERIES, 5. MAGNETIC CARD READER (OPTION) 5.1 How to Read Magnetic Card 5-1 EO1-12037 5. MAGNETIC CARD READER (OPTION) The optional magnetic card reader can be installed. 5.1 How to Read Magnetic Card Insert the magnetic card into the upper portion of the magnetic card reader slot and slowly move the card downward. NOTE: Moving the magnetic card too fast or too slowly may cause a read error.

  • 9. SPECIFICATIONS 9.1 Basic Specifications 9-1 EO1-12037 9. SPECIFICATIONS 9.1 Basic Specifications *: At least a 1GB of system memory is recommended to run Windows Vista. If the memory is small in capacity, the POS terminal may not function correctly. Item Description CPU Intel Celeron M 440 (1.86GHz) Memory 512 MB/1GB (max. 2GB) SO-DIMM DDR2-533/PC2-4200

  • Toshiba ST-A20 SERIES, 2. APPEARANCE 2.2 Available Options 2-3 EO1-12037 LED and CONTROL BUTTON DESCRIPTION Power LED (Blue) This is the LED to indicate the power ON/OFF status of the POS terminal. The blue LED is illuminated when the power is ON. HDD LED (Yellow) The yellow LED is illuminated during the access to the hard disk drive. Power Switch This is the switch to turn the power of the POS terminal ON or OFF. Brightness Control This is used to adjust t

  • Toshiba ST-A20 SERIES, 3. INSTALLATION PROCEDURE 3.1 Environment for Installation 3-1 EO1-12037 3. INSTALLATION PROCEDURE WARNING! Care must be taken not to get your fingers caught between the LCD Frame and the POS terminal when bending the display downward. CAUTION! When removing the protective film from the display surface, please be sure to do it slowly. If it is done quickly, static electricity may generate, and the TFT may be damaged

  • Toshiba ST-A20 SERIES, 2. APPEARANCE 2.2 Available Options 2-4 EO1-12037 2.2 Available Options Wireless Adaptor Case Fixed type customer display BIU Magnetic Card Reader (MCR) Tilt type customer display BIU iButton Remote type customer display RIU

  • Toshiba ST-A20 SERIES, Safety Summary EO1-12037 (ii) If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance. Continued use of the machine in that condition may cause fire or electric shock. When unplugging the power cords, be sure to hold and pull on the plug portion. Pulling on the cord portion may cut or expose the internal wires and cause fire or electric shock. Ensure that the equipment is properly

  • Toshiba ST-A20 SERIES, 2. APPEARANCE 2.3 Examples of POS Terminal with Some Options 2-5 EO1-12037 2.3 Examples of POS Terminal with Some Options

  • Toshiba ST-A20 SERIES, 2. APPEARANCE 2.4 Connectors 2-6 EO1-12037 2.4 Connectors CAUTION! The drawer interface connector is exclusively for connecting the drawer. Do not connect a phone line or any other cables than the drawer cable to this connector. Doing so may cause a failure of the phone line and this terminal.

  • Toshiba ST-A20 SERIES, 3. INSTALLATION PROCEDURE 3.2 Connecting the AC Plug 3-2 EO1-12037 3.2 Connecting the AC Plug 1. Push on both sides of the molded Tower (TWR) Tail Cover to remove it from the system in order to gain access of the AC inlet. 2. Fully insert the Power Cord Plug into the Inlet of the POS terminal. NOTE: The Power cord is not included in the carton. Please prepare it separately from local dealer. Power Cord Plug Push Push Lift Inlet Power

  • Toshiba ST-A20 SERIES, 4. ADJUSTMENT 4.3 Volume Adjustment 4-3 EO1-12037 4.3 Volume Adjustment The volume control is provided on the lower right of the tower. Turning it to the left makes the volume lower, and turning it to the right makes the volume higher.

  • Toshiba ST-A20 SERIES, 7. GENERAL MAINTENANCE 7. General Maintenance 7-1 EO1-12037 7. GENERAL MAINTENANCE WARNING! 1. Be sure to disconnect the power cord prior to performing any maintenance. 2. Do not pour water directly on or wipe the operator’s display with a soaked cloth, as this may cause fire, electric shock, or machine failure. CAUTION! 1. Never use an organic solvent like thinners or benzene for cleaning. Using such solvents may discolor the covers. 2. Do not use any sharp object to clean the operator’s display. Doing so may cause an operator’s display failu

  • Toshiba ST-A20 SERIES, English Waste Recycling information for users: Following information is only for EU-member states: The crossed out wheeled bin symbol is used to indicate that the product must not be treated as general household waste. By ensuring that this product is disposed of correctly you will be helping to prevent potentially negative consequences for the environment and human health, which could otherwise be caused by incorrect waste handling of this product. For more detailed information about the take-back and recycling of this equipment, please contact the supplier that provided you with the product in quest

  • Toshiba ST-A20 SERIES, 6. iBUTTON® (OPTION) 6.1 How to Read iButton 6-1 EO1-12037 6. iButton ® (OPTION) The optional iButton unit can be installed on the bottom of the LCD. 6.1 How to Read iButton CAUTION! 1. Keep storage media, like a floppy disk, away from the touch probe. The magnet of the touch probe may destroy the stored data 2. Keep a metal object like a paper clip away from the touch probe. If such an object is attached to the touch probe, it m

  • 9. SPECIFICATIONS 9.2 Options 9-2 EO1-12037 9.2 Options Option Model Description DRWST-51A-4MVK-QM-R DRWST-51A-8MVK-QM-R 24V-drive standard drawer Dimensions and Weight: 460(W) x 400(D) x 115(H) mm / 18.1(W) x 15.7 (D) x 4.5(H) inch 10 Kg / 22 lb Money Case Type: MC4, 8 Type Bill Holder Coin Tray Mini Coin Case CDC Remarks 4MVK-QM 5 5 No Yes Wit

  • Toshiba ST-A20 SERIES, EO1-12037 TABLE OF CONTENTS Page 1. INTRODUCTION ------------------------------------------------------------------------- 1-1 1.1 Accessories -------------------------------------------------------------------------------- 1-1 2. APPEARANCE --------------------------------------------------------------------------- 2-1 2.1 Standard Model ---------------------------------------------------------------------------- 2-1 2.2 Availabe Options -------------------------------------------------------------------------- 2-4 2.3 Examples of POS Terminal with Some Options ----------------------------------- 2-5 2.4 Connectors -------------------

  • Safety Summary EO1-12037 (i) Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modif

  • Toshiba ST-A20 SERIES, 4. ADJUSTMENT 4.1 Tilt Angle Adjustment 4-1 EO1-12037 4. ADJUSTMENT Tilt angle and brightness of the operator’s display can be adjusted. Adjustment method is common to both of 12-inch display model and 15-inch display model. CAUTION! 1. Do not adjust the display angle by holding the LCD panel. Doing so may damage the unit. Be sure to hold the LCD frame. 2. Care must be taken not to catch your fingers between POS terminal and the LCD Frame when bending the display backward. 4.1 Tilt Angle Adjustment The tilt angle of the operator’s display can be adjusted freely from 10° to 60°. Hold both sides of the LCD frame, and slowly push the

  • 2. APPEARANCE 2.4 Connectors 2-7 EO1-12037 Connector Description AC inlet A connector for the AC inlet PS/2 (Mouse, Keyboard) Mini-DIN 6- pin female type connector Connector for the PS/2 type mouse, Connector for the

  • Toshiba ST-A20 SERIES, 4. ADJUSTMENT 4.2 Brightness Adjustment 4-2 EO1-12037 4.2 Brightness Adjustment The brightness control is provided on the lower right of the operator’s display. Turning it to the left makes the display darker, and turning it to the right makes the display brighter.

Related Products and Documents (Cash Register):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 SportsArt Fitness 805P Repair manual sportsart-fitness/805p-8W8.pdf 03 Nov 2023 95 8.27 Mb
2 Marantz SR4300 Operation & user’s manual marantz/sr4300-15A.pdf 09 Oct 2023 46
3 Harbor Freight Tools 91835 Assembly and operating instructions manual harbor-freight-tools/91835-7U3.pdf 05 May 2023 7 0.45 Mb
4 Canon C5800 Brochure & specs canon/c5800-R6K.pdf 05 Feb 2024 12 1.31 Mb
5 Symantec WISESCRIPT EDITOR 8.0 - REFERENCE FOR WISE PACKAGE STUDIO V1.0 Reference symantec/wisescript-editor-8-0-reference-for-wise-package-studio-v1-0-936.pdf 05 Jan 2024 174
6 ViewSonic VA926 - 19" LCD Monitor Bedienungsanleitung viewsonic/va926-19-lcd-monitor-TC9.pdf 25 Jan 2024 24 0.47 Mb

Similar Resources:

  • Casio

    130CR

    (3 pages)
    130CRElectronic Cash RegisterEUUKDISTART-UP is QUICK and EASY!Simple to use!4 departments and 100 PLUsAutomatic Tax CalculationsCalculator functionUser's Manual130CR-S130CR-MGMCasio 130CR users ManualCasio 130CR users Manual …
  • Sharp

    ER-A410

    (9 pages)
    ELECTRONIC CASH REGISTERINSTRUCTION MANUALER-A410ER-A420MODELER-A410/A420The above illustration shows the model ER-A410. HYO-1,4(SEEG)(E) 02.4.20, 6:46 PM1Sharp ER-A410 and ER-A420 instruction ManualSharp ER-A410 and ER-A420 instruction ManualSharp ER-A410 and ER-A420 instruction ManualSharp ER-A410 and ER-A420 instruction Manual …
  • Olivetti

    ECR 5500

    (67 pages)
    Cash RegisterCash RegisterCash RegisterCash RegisterCash RegisterINSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONS D'EMPLOIINSTRUCTIONS D'EMPLOIINSTRUCTIONS D'EMPLOIINSTRUCTIONS D'EMPLOIINSTRUCTIONS D'EMPLOIBEDIENUNGSANLEITUNGBEDIENUNGSANLEITUNGBEDIENUNGSANLEITUNGBEDIENUNGSANLEITUNGBEDIENUNGSANLEITUNGINSTRUCCIO …
  • Sharp

    XEA403

    (1 pages)
    XE-A403 Quick Start GuideThe following describes how to get the cash register ready for operation. Follow these steps before using the cash register for the first time. Place the cash register on a stable, flat surface not subject to direct sunlight.1Initializing the Cash RegisterTo ensure the cash register operates properly, pleaseuse the following proce …
  • Sharp

    ER-A440

    (52 pages)
    SERVICE MANUALELECTRONICCASH REGISTERMODEL ER-A440SRV Key : LKGIM7113RCZZPRINTER : DP-730("U" & "A" version)CAUTIONEXTREME CAUTION MUST BE TAKEN WHEN SERVICING THIS MACHINE. EVENTHOUGH THE MODE SWITCH IS IN THE OFF POSITION, VOLTAGE IS STILL SUPPLIEDTO THE ENTIRE MACHINE.WHEN WORKING ON THIS MACHINE MAKE SURE THAT THE POWER CORD ISREM …
  • JARLTECH

    8670

    (25 pages)
    JARLTECH ISO 9002 Certified Lead with technology Win customers with service User Operation Manual888666777000 TTTeeerrrmmmiiinnnaaalll UUUSSSEEERRR MMMAAANNNUUUAAALLL …

Comments, Questions and Opinions: