Manualios.com

Toshiba 210C Operator's Manual For Copying Functions

Toshiba 210C Manual Online:

4.5, 1498 votes
Toshiba 210C User Manual
Toshiba 210C User Guide
Toshiba 210C Online Manual

Text of Toshiba 210C User Guide:

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 2-15 You can preset the next copy modes during a copy run. You cannot preset the next copy modes during the scanning of the originals. During Copying 2 Press the JOB PRESET key during a copy run. 1 Place the original(s). Page 2-9 - The following message appears: JOB PRESETTING Select other copy modes as required. 3 Press the START key. 4 The preset job will start when the current copying is finished. If the copy run is interrupted due to running out of paper, etc.during job presetting, press the JOB PRESET key to set the desired copy mod

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 3-5 Select other copy modes as required. 5 Press the START key. 4 Press the ORIGINAL SIZE key of the same size as the original. - Using the original size and copy size, the correct reproduc- tion ratio is computed and displayed on the screen. - OTHER key Page 6-15 Specifying both Original Size and Copy Size 1 Place paper in the cassette(s). Page 2-4 2 Place the original(s). Page 2-9 3 Press the desired cassette, then the ZOOM··· key. - The copy paper size is selectable on the screen in step 4 as well.

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 9-28 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL When the CALL SERVICE symbol flashes, the following message appears and copying is no longer possible. Call your service technician. Call for service When the CALL SERVICE or CLEAR PAPER symbol is flashing, if you press the c Clear key and the digital key 8 together, the corresponding error code will appear on the copy quantity display only while both keys are held down. Please give the error code in addition when you are asking for service. Since heaters are used to fix toner

  • 1 2 3 4 5 6 7 8 9 10 11 12 6-25 4 Using the digital keys, enter the current access code (5 digits) of the department you want to change, and press the SET key. 4 Using the digital keys, enter the desired access code (5 digits) into the fields of NEW ACCESS CODE and CONFIRM ACCESS CODE, and press the SET key. - You cannot enter an access code which has already been registered. The adminis

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 2-3 HELP 1 1 2 1 To make multiple sets of copies: - Key in the copy quantity with the digital keys. - To correct the input copy quantity, press the c CLEAR key. When paper of the same size as the original has run out: The corresponding cassette key on the touch panel flashes. Add paper or select another cassette. To stop a copy operation Page 2-18 When this message appears: “Wait Performing Auto Cali- bration”: The copier may automatically go into the adjus

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 5-13 Select other copy modes as required. 6 Press the START key. 2 Place the original(s). Page 2-9 3 Press the EDIT key to enter the editing menu, and press the XY ZOOM key. - If the key for the desired function is not shown, press the Next key to switch between the screens. 1 Place paper in the cassette(s). Page 2-4 You can make copies with different reproduction ratios set for the X (horizontal) and Y (vertical) direc- tions, respectively. 4 Set the reproduction ratios for the X (horizontal) and Y (vertical) directions, respectively. - Using the 25% <

  • 1 2 3 4 5 6 7 8 9 10 11 12 8-7 15 Select an attachment format ( ATTACHMENT or URL ), then press the SET key. - ATTACHMENT ...Attaches the scanned image data to the e-mail and sends them to the set mail address from the printer controller. However, if the mail sever capacity for ‘ATTACHMENT’ (the initial setting is 1MB when setting the machine) is exceede

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS5-12 Select other copy modes as required. 6 Press the START key. - When placing an original on the glass, perform steps 5 to 6 on page 2-3 continuously. - If the optional finisher (MJ-1020) equipped with the saddle stitcher is installed, copies can be automatically stapled along their centre line. To have copies stapled, press the STAPLE ON key. - Maximum number of sheets that can be stapled Page 7-7 If the binding margin is set as less than 12mm and the STAPLE ON key is pressed, the paper may not exit

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 6-9 1 Press the desired Memory Number key. - When the paper size is ‘0mm’, the selected Memory Number key is vacant. - When the paper size is displayed, a non-standard size is al- ready stored in the selected Memory Number key. If those data may be deleted, perform step 2. New data will be rewrit- ten and stored on that Memory Number key. Storing a Non-Standard Size in the MEMORY 2 Key in each dimension with the digital keys, then press the MEMORY key. - Key in the length with the digital keys and press the upper SET key. Similarly, set the value for the width.

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 3-3 1 Place paper in the cassette(s). Page 2-4 - When using this mode in bypass copying ( Page 6-5), be sure to specify the paper size. - Or press the ZOOM··· key to enter the next screen, and press the key of the desired paper size. - OTHER key Page 6-15 Select other copy modes as required. 4 Press the START key. Manual Paper Selection It may not be possible for the device to perform Automatic Paper Selection with highly transparent origi- nals such as OHP films and tracing paper, wholly dark originals or originals with

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 9-29 When the following message has appeared on the display panel: Time for periodic maintenance (Colour) or Time for periodic maintenance (Black) this indicates that assistance from a qualified service technician is required. Call your service techni- cian for assistance. 10. PERIODIC MAINTENANCE MESSAGE ,

  • 1 2 3 4 5 6 7 8 9 10 11 12 1-1 1. BEFORE MAKING COPIES 1. Description of the digital colour copier and the optional equipment ...... 1-2 - Main components .......................................................................................... 1-2 - Optional equipment ........................................................................................ 1-3 - Control p

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 11 -12 SPECIFICATIONS & OPTIONS 5. IMAGE QUALITY ADJUSTMENT COMBINATION MATRIX Manual S Y Y Y Y Y Y Y Y Y S Y Auto S Y Y Y Y Y Y Y Y Y F Y Monocolour Y Y F F F F F F F F Y Y Hue Y Y F Y Y Y F F F F Y Y Saturation Y Y F Y Y Y F F F F Y Y Colour balance Y Y F Y Y F F F F F Y Y RGB Y Y F Y Y F F F F F Y Y Vivid Y Y F F F F F F F F F F Clear Y Y F F F F F F F F F F WarmYYF FF F F FF FFF Cool Y Y F F F F F F F F F F Background Y F Y Y Y Y Y F F F F Y Sharpness Y Y Y Y Y Y Y F F F F Y Copy density Colour mode selection One- touch adjust- ment Copy density Manual Auto Colou

  • 1 2 3 4 5 6 7 8 9 10 11 12 10 -4 MAINTENANCE Is the copier in the energy saving mode (Automatic Energy Saving mode)? Is the access code keyed in? Is the access code correct? Is a key copy counter (optional) used? Is the “Warming up” message displayed? Does the administrator password input screen appear? Is interrupt copying set? Reference page Page 1-2, 9-4 Pa

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 5-11 The magazine sort mode allows 1-sided originals to be copied and sorted so that they can be folded and bound along a centre line like typical magazines or booklets. A3, A4-R, B4, LD and LT-R are available. • The optical automatic duplexer must be installed. * This mode cannot be used in combination with the AUTO COLOUR mode ( Page 3-14). Example of copying a 12-page document • If used in combination with the optional finisher (MJ-1020) equipped with saddle stitch capabilities, copies can be automatically folded in half and stapled along their centre line. * There are two

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 1-7 - Set functions confirmation key This key allows you to confirm the functions that have been set. (The display shown on the right is an example.) Clearing the Functions Selected The icons displayed on the screen are as follows(some icons may not appear on the screen): If you press any key that is half-tone shaded, the function selected is cleared. Also, if the copier is left inactive for approx. 45 seconds, the automatic function clear ( Page 1-5) works and the settings will be cleared.

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 10 -1 10. MAINTENANCE 1. Daily inspection ........................................................................ 10-2 2. Simple troubleshooting ............................................................. 10-4

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 6-18 USING THE SPECIAL FUNCTIONS Using the built-in weekly timer, you can have the copier automatically turned ON and OFF at specified times. For instance, you can set the timer for the starting time and closing time of your office so that the copier will automatically turn itself ON and OFF at those specified times. - When the weekly timer is in use, the timer lamp on the control panel lights. * When the power switch is turned off, the weekly timer does not work. 7. WEEKLY TIMER Setting the Weekly Timer 1 Press the P

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 5-21 Select other copy modes as required. 9 Press the START key. 7 Select the repeat number. - To change the repeat number: Press the 2 or 8 key to select the desired repeat number, and press the SET key. - If the repeat number is not set, the copier automatically re- peats the original once. Only the height direction is available for repeat copying, and the original can be repeated up to 8 times. - If the settings of the original and copy sizes are not made appropriately, the repea

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS5-14 3 Press the TRIM (or MASK ) key. 2 Press the EDIT key to enter the editing menu, and press the EDITING key. - If the key for the desired function is not shown, press the Next key to switch the screen. 9. IMAGE EDITING Trimming/Masking You can select an area on an original and copy it with the area trimmed (only the inside of the area copied) or masked (only the outside of the area copied). One rectangular area can be specified on an original. * Image editing is only possible with standard sized originals. * If the settings of the original and copy sizes are not made appropriately, the imag

  • Toshiba 210C, 1 2 3 4 5 6 7 8 9 10 11 12 8-10 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) HELP 2. SHUTTING DOWN THE POWER SUPPLY TO THE PRINTER CONTROLLER If the optional internal printer controller (GA-1120) is installed, be sure to shut down the power supply to the printer controller before turning the power switch of the copier OFF. 1 Press the PRINTER/NETWORK key. 2 Press the SHUTDOWN key. 3 Press the YES key. - The message “Shutdown in progress” appears. 4 The power supply to the printer controller is shut down when the screen on the right appears. - Be sure to turn the power of the copier OFF after the scre

More Instructions:

DOWNLOAD

Related Products and Documents (Copier):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Caple CR 1003 SS Instruction manual caple/cr-1003-ss-L31.pdf 04 Aug 2023 40 1.18 Mb
2 Lennox KGA092KGA102KGA120KGA150 Installation instructions manual lennox/kga092kga102kga120kga150-611.pdf 08 Oct 2023 32
3 Xerox 6180DN - Phaser Color Laser Printer Manual  xerox/6180dn-phaser-color-laser-printer-Z86.pdf 27 Oct 2022 28 3.17 Mb
4 Black & Decker 7307 Owner's manual black-decker/7307-E33.pdf 04 Mar 2024 2 6.62 Mb
5 Toshiba Satellite A210 Series Maintenance manual toshiba/satellite-a210-series-814.pdf 08 Sep 2022 253
6 Exposure XXXV Quick start manual exposure/xxxv-H8Q.pdf 12 Nov 2023 2

Similar Resources:

  • Xerox

    WORKCENTRE 5790

    (7 pages)
    Expectation Setting Document for Fiery ZX-6 v1.1Digital Front End for 5790 and DocuColor 5750/ 5799Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.Launch Version 3 August 1998Page 1 of 7 zx6_launch_ced.docCustomer SupportThe Xerox Customer Support Centers are a …
  • Sharp

    AR-M256

    (24 pages)
    DIGITAL MULTIFUNCTIONAL SYSTEMKEY OPERATOR'S GUIDE• PURPOSE OF THE KEY OPERATOR PROGRAMS• PROGRAMMING A KEY OPERATOR CODE• USING THE KEY OPERATOR PROGRAMS• KEY OPERATOR PROGRAM LIST• GENERAL PROGRAMS• PROGRAMS FOR COPY MODE• PROGRAMS FOR PRINT MODE• PROGRAMS FOR NETWORK SCANNER MODE11248151620PageMODELAR-M256AR-M316 …
  • Konica Minolta

    bizhub 42

    (11 pages)
    Konica Minolta bizhub 42/36Specification & Installation Guide108/15/2012bizhub 42/36 SpecificationsType Monochrome Laser MFPDocument Holder Stationary (mirror scanning) Types: Sheets, books (page spreads), 3-dimensional objects Size: Maximum 8.5" x 14"Photoconductor Organic PhotoconductorLuminous Source White inert gas fluorescent lampCopyi …
  • Minolta

    EP1054

    (193 pages)
    FrameMaker Ver.5.5E(PC) COVER [FIELD SERVICE] FOR EP1054/EP1085/EP203098.09.11FrameMaker Ver.5.5E(PC) COVER [FIELD SERVICE] FOR EP1054/EP1085/EP203098.09.11Copyright1998 MINOLTA CO., Ltd.Printed in JapanUse of this manual should be strictly supervised to avoid disclosure of confidential information.MINOLTA CO., LTD.1174-7991-11 98114400EP1054/EP1085/EP2030 …
  • Kyocera

    TASKalfa 4820w

    (2 pages)
    Safety GuideManuel de SécuritéFolleto de seguridadTASKalfa 4820wSicherheitsleitfadenGuida alla sicurezzaGuia de SegurançaCautionary Labels/Markings / Étiquettes/Marques Attention / Etiquetas de precaución/Marcas / Warnschilder im Gerät/MarkierungenEtichette di avvertenza/marcature / Etiquetas/marcas de Cuidado The machine bears any of the following lab …
  • Konica Minolta

    bizhub 42

    (210 pages)
    Fax OperationsUser’s GuideUser’s Guide*XXXXXXXX00**XXXXXXXX00*Konica Minolta Business Solutions Europe GmbHEuropaallee 17 30855 Langenhagen • GermanyTel.: +49 (0) 511 74 04-0Fax: +49 (0) 511 74 10 50www.konicaminolta.eu© 2009 Konica MinoltaBusiness Solutions Europe GmbHAll rights reserved. Printed in Germany. …

Comments, Questions and Opinions: